DL Break Point error.. please help!

Hi All,
I have a really big DSP4 projects with a 78 min feature, and about 15 more 2-5min clips. For some reason, I am having a really hard time setting a break point.
If I choose automatic break, I get:
"Formatting was not successful. A suitable marker could not be found in the required layer break range. See the DVD Studio Pro User's Manual for more information."
...and if I set the breakpoint myself, I get:
"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."
Please help me out!

Hi, I definitely understand what you are going trough, I spent a whole week trying to find the brake point, after reviewing my tutorial I realized wherre the problem was. Devide the total lenght of the movie by 2 and then add about 5 to 10% to the 50%, than start adding markers on the timeline close together, you are allowed 99 markers, hilight each marker after being used so that you can keep track, if you are reaching the disc limit, than you may be limited to a few choises.I hope this works for you.
G5 Dual 2.0 Mac OS X (10.4.4) ATI 9800 Pro Display Card
G5 Dual 2.0 Mac OS X (10.4.4) ATI 9800 Pro Display Card

Similar Messages

DL Break Point Issue - Please Help.

Hello,
I use to work in DVDSP when you could only do one layer and even then I knew just enough to get the job done. Now I have a program that is 6.6 gigs total size (according to DVDSP) and I can't get this thing to find the break point. I have read through most of the manual regarding this issue and have read many posts - first I have to ask is why is this so difficult?
Here are the issues in detail and I ask that if you give input please guide me like I have limited knowledge in this.
I am using DVDSP 4.1.0 on a G5 Dual 1.8 OS is 10.4.8 with a Pioneer DVR 111D. I have 4 'tracks' all coming off one main menu...no sub menu's - so I have the one main and four buttons that go directly to the videos. When I try to 'burn' the DVD I get this error 'Formatting was not successful. A suitable marker could not be found in the required layer break range. See the DVD Studio Pro User's Manual for more information.' The size of each track is as follows:
Track One: The Main footage is 4.0 Gig (this is the one I am trying to set the break point because the limit is 3.9 Gig)
Track Two: is 1.7 Gig
Track Three: 606 Meg
Track Four: 216 Meg
I have tried 'Automatic' without luck.
I have tried to place a few markers approximately 3/4 of the way through Track One the marker that I place is Green and in the Inspector window when I click on that marker I see the 'Marker Function' and then the button to select Dual-Layer Break Point and I select that only. However when I click something else and then come back to Marker the Dual Layer Break Point is not selected!
I then have gone into the 'Disc/Volume' and tried to select the 'Break Point' and chose Track One but still nothing. I have read in the forums about building the disc and then going into the TS folders and blah blah blah to get this done but that is above my head and I don't understand it.
I just need to get this video done. It is for a family who's 17 daughter was tragically killed and will be a fund raiser for them...I need to get this done. So if any of you are willing to help that would be SO appreciated AND if any of you would be so kind to walk me through this over the phone THAT WOULD BE GREAT! Just email me at [email protected] and I will email you my number. I know this is a tad different but I don't have much time left to get this done because of my 'real job' and again, I need to get this done!

Hi csiaudio,
Build the project (AltAppleC). Then in the format window (Apple+F), Disc/Volume tab you'll be able to see the available break point markers. If they are all greyed out then you do not have one in the project.
Add Cell markers in places that you think would be ok as the layer switch. You do this by adding a chapter marker and then in the property inspector un-checking the type Chapter. This will now be a marker that can be used as a dual layer break point but is not a chapter marker.
You'll need to re-build the project and check the format window options again,
-Jake

Windows - No Disk Error - Please help!

Windows - No Disk Error - Please help!
Hi,
I have the following set up:
* Lenovo T-61p
* Windows XP Pro, SP 3
* HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
I am getting the following error:
Windows - No Disk
Exception Processing Message 0xc0000013 Parameters 0x75CE023C
0x84C40C84 0x75CE023C
I have done a lof experimenting and thru process of elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in. In my case, this is drive E. I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
Anyone every any better, more permanent solutions? Or know what the real root of the problem is? What is scanning all the drives and being showing an error message because it found an empty drive?
Thanks and Happy Holidays/New Year!

I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input.

My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario

I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)

I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)

Although your message isn't mentioned in the symptoms, let's try the following document with that one:
Apple software on Windows: May see performance issues and blank iTunes Store

HT201442 I did this but still i am getting the same error , please help me .

I did this but still i am getting the same error , please help me .
<Email Edited by Host>

Look at http://support.apple.com/kb/ts4451
 Cheers, Tom

I am not able to update my iphone 4 ,when ever i tried to update it its show 1309 error...and at times 9006 error ,please help me ..

i am not able to update my iphone 4 ,when ever i tried to update it its show 1309 error...and at times 9006 error ,please help me ..

Hey alkarim2008,
If you are having an issue with being unable to update or restore your iPhone, I would suggest that you troubleshoot using the steps in this article -
Resolve iOS update and restore errors in iTunes - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

My iphone won't pass the connect to itunes. when i try to restore is says that there is an error. please help!

hi my iphone is broken. it won't pass the connect to itunes. when i try to restore is says that there is an error. please help!
thanks,
jg2013
<Subject Edited by Host>

Hello, 02633.
Thank you for visiting Apple Support Communities.
If your iPhone is disabled, you will need to process the steps in the article below.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
Jason H.

HT4623 I have updated my iphone with the current software but it is showing you need to connect to of itunes to activate your phone, when i did that it is continuously showing an error.please help me to get through.

I have updated my iphone with the current software but it is showing you need to connect to of itunes to activate your phone, when i did that it is continuously showing an error.please help me to get through.
Kindly Activate my phone.

Rajan Gupta wrote:
...it is continuously showing an error.
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708

I need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help

i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them

Doug...
If you don't have it for reference, the manual might come in handy > US/Boot_Camp_Install-Setup.pdf
After it loads, Command + F to find information regarding the drivers.

HT201210 hi i just bought my new iPhone 4s yesterday and when u opened it was not updated so when i tried SO MANY TIMES to update it on the devise and on my new mac it said that there was a unknown error please help me :)

hi i just bought my new iPhone 4s yesterday and when u opened it was not updated so when i tried SO MANY TIMES to update it on the devise and on my new mac it said that there was a unknown error please help me

Please tell us what kind of computer you have, what operating system and what version of iTunes. Not just "the latest version of iTunes", the exact version number.

I can't download the apple ios 5 for the ipad. after downloading around 10 % an error no. 3259 occurs. it's a network error. please help . it's urgent. i am having apple ipad 2 3G wifi

i can't download the apple ios 5 for the ipad. after downloading around 10 % an error no. 3259 occurs. it's a network error. please help . it's urgent. i am having apple ipad 2 3G wifi.

i switched off all the security settings and all the firewalls.
i m unable to install any of the app on the ipad
so i saw the apple support and it said to update the older version of my ipad.
and niether am i able to download the update nor am i able to download any app and install it in my ipad2
i also tried to download an .ipsw file (ios5 update) from torrentz bt i am also unable to install from that as itunes rjects that file and gives an error. and also tries to delete that file. plz anyone help urgently.

I have update my 3g software to 4.21 but its not working when it come to restoring firmware its show a error please help me out

i have update my 3g software to 4.21 but its not working when it come to restoring firmware its show a error please help me out

That error shows up when a phone is jailbroken or you are trying to downgrade the iOS version. Neither of which is supported by apple.

I am geting following error please help

ERROR-
RPC Fault faultString="HTTP request error" faultCode="Server.Error.Request" faultDetail="Error: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032: Stream Error. URL: http://www.nature.com/principles/webservice/login" errorID=2032]. URL: http://www.nature.com/principles/webservice/login"]
code-
operation = new Operation(null, "login");
operation.url = "login";
argsArray = new Array("login_id", "login_password", "unique_machine_id");
operation.argumentNames = argsArray;
operation.method = "POST";
operation.serializationFilter = filter;
operations.push(operation);
public function login(loginId:String, loginPassword:String, uniqueMachineId:String):AsyncToken
       trace(loginId, loginPassword, uniqueMachineId);
       var _internal_operation:AbstractOperation = _service.getOperation("login");
       var _internal_token:AsyncToken = _internal_operation.send(loginId, loginPassword, uniqueMachineId);
       return _internal_token;
login service is being called from server that is in java-
package com.nature.ebook.components.auth
import com.nature.ebook.data.UserInfo;
import com.nature.ebook.services.CallStatus;
import com.nature.ebook.services.IEBookService;
import com.nature.ebook.services.XMLServiceParser;
import flash.events.EventDispatcher;
import flash.events.IEventDispatcher;
import mx.controls.Alert;
import mx.rpc.AsyncToken;
import mx.rpc.Fault;
[ManagedEvents("authSuccess, authFail")]
public class AuthCommand extends EventDispatcher
public function AuthCommand(target:IEventDispatcher=null)
[Inject]
public var service:IEBookService;
[Inject]
public var auth:AuthModel;
// Methods
* This command dispatches event AuthenticationEvent.AUTH_FAIL when the service return failt
* @param fault Fault
public function error(fault:Fault):void
trace(fault);
var e:AuthenticationEvent = new AuthenticationEvent(AuthenticationEvent.AUTH_FAIL, null, null, CallStatus.getServerFaultCall());
dispatchEvent(e);
* This command dispatches event when the service return rezult Array
* @param result Array
* if cs.success <code>true </code> dispatch AuthenticationEvent.AUTH_SUCCESS
* if cs.success <code>false</code> dispatch AuthenticationEvent.AUTH_FAIL
public function result(result:*):void
if (result)
var cs:CallStatus = XMLServiceParser.getCallStatus(result);
if (cs.success)
var us:UserInfo = XMLServiceParser.getUserInfo(result);
var e:AuthenticationEvent = new AuthenticationEvent(AuthenticationEvent.AUTH_SUCCESS, us, null, cs);
dispatchEvent(e);
else
e = new AuthenticationEvent(AuthenticationEvent.AUTH_FAIL, null, null, cs);
dispatchEvent(e);
public function execute(event:AuthenticationEvent):AsyncToken
return service.login(event.user.loginId, event.magicWord, event.user.uniqueMachineId);

Sorry for the confusion. After starting the WLS 6.0 server, use your browser
to launch the console, verify that the Frobable EJB is correctly deployed as
frobtarget with the correct class path specified. The 6.0 JAAS sample is
trying to invoke on examples.security.acl.Frobable, make sure this is the
deployed instance. This is an error in the JAAS example SampleAction.java
file since the JAAS sample actually builds examples.security.jaas.Frobable,
this bug will be corrected in service pack 1 which will be available
shortly.
nancy coelho <[email protected]> wrote in message
news:3a9ee0af$[email protected]..
Hi! I am new to JAAS and also to Weblogic server6.0. I am trying to run
JAAS sample and geting the following error . please help
Thanks,
Nancy
E:\bea\wlserver6.0\samples>java examples.security.jaas.SampleClient
t3://localho
st:7001
Using Configuration File: Sample.policy
Login Module Name: examples.security.jaas.SampleLoginModule
Login Module Flag: required
username: ncoelho
password: prabhala
javax.naming.NameNotFoundException: Unable to resolve frobtarget.Resolved:
'' U
nresolved:'frobtarget' ; remaining name ''
at
weblogic.rmi.internal.AbstractOutboundRequest.sendReceive(AbstractOut
boundRequest.java:90)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:247)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:225)
at
weblogic.jndi.internal.ServerNamingNode_WLStub.lookup(ServerNamingNod
e_WLStub.java:121)
at
weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:323)
at javax.naming.InitialContext.lookup(InitialContext.java:350)
at examples.security.jaas.SampleAction.run(SampleAction.java:61)
at javax.security.auth.Subject.doAs(Subject.java:80)
at examples.security.jaas.SampleClient.main(SampleClient.java:114)
Failed to frob
E:\bea\wlserver6.0\samples>

HT201210 cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

If you mean updae server
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Otherwise what server are you talking about

I can not connect my i phon with my pc it shows athorised computer when i am trying to do authorised process the process done but again i connect my phon again show this errore please help me to solve my prob....

i can not connect my i phon with my pc it shows athorised computer when i am trying to do authorised process the process done but again i connect my phon again show this errore please help me to solve my prob....

I have clicked on the connect button, but it brings up the same There is a problem connecting, and I have also tried SMB://
i tried pinging the ip address with in termial and it times out.
From my windows PC and I can access my MacBook Air just fine,

DL Break Point error.. please help!

Similar Messages

Maybe you are looking for