DL DVD to single layer DVD

Is it possible to copy a DVD DL to two single layer DVDs (to install Leopard onto a non-DL optical drive)?

There are utilities that can compress video DVDs, but it won't matter in this case. Even if you did what you are trying to accomplish, the OS Installer doesn't 'know' that the data is split onto two disks, and therefore won't be able to complete the install.

Similar Messages

Burning hd dvd on single layer dvd

I have just burned my first hd dvd onto a normal single layer dvd and it works beautifully on my Mac but does not play in any hd dvd player I could find to test in South Africa, neither in my friends' pcs. What is wrong?

I had a good look at the article on macvideo.co.uk and I am going to try what is described there.
Meanwhile, I was thinking of a backup option in case the hd dvd does not work. It is to play the hd movie directly on the pc connected to the large hd flat screen 1920 x 1080 pixels.
As a Mac user, I don't know well what is the best format to export the hd movie to get the best results. Any suggestion?
And also what special player or add-on do I need to play the movie on the pc under windows?

Making 8gb dvd onto single layer dvd with popcorn?

I know you can compress a dual layer dvd using popcorn to fit onto a single layer dvd.
Is there any way to make a 4.7 or larger dvd WITHOUT burning it to a dual layer dvd, but sending it to your HD then using Popcorn to compress it and then record it to a single layer disk?

Hi gecko,
If you have a supported DL burner, then yes, you can set your project size to 8GB, use File > Save As Disk Image to create a 8GB disk image file, then use Popcorn to compress it to fit into a SL DVD.
Power Mac G4 (QuickSilver) Mac OS X (10.4.3)

What is the best Compressor settings for burning a 2 hour DVD on single layer disc?

I have a 2 hour (120 minutes) project timeline which I want to encode in compressor to fit on a single layer DVD.
Do I need to change the Bit Rate to make it fit on a single layer?
Or can someone post the settings or link to where I can find the best settings?
Thanks in advance,
z

Select "Best 120 minutes" and you should be good to go.
x

HELP! Cannot Compress Footage to Single Layer DVD...

Here's my problem.
I cannot compress footage to single layer DVD. I'm trying to make a DVD with motion menus and a full length feature. TRT 1 hr 47 min 3 sec. I compressed the video and audio using compressor after it did not fit on one single layer DVD the first attempt. The file sizes of the newly compressed video and audio are adequate to fit on the 4.7GB DVD but after importing the into DVD Studio Pro 4 (DSP4) the disc size comes out to 5.1GB. After DSP4 does its own encoding the file sizes double. I cannot figure this out. Please help.
-Alex-
G5 2.5 Quad Mac OS X (10.4.4) Running Avid Xpress Pro, After Effects, and DVD Studio Pro 4

AS per David suggestion, get yourself on A.Pack and convert your audio to Ac3.
a link to explain how to use A.pack for a dvd project (providing that you have A.pack still, otherwise you will have to use Compressor, depending what version of the suite you have.
Still this link will help you both:
http://www.dvdxdv.com/Tutorials/ProV1/FCP.multi-channel.htm
Depending on your version of Compressor, you may have A pack or you may not...
An AIFF File could increase your project by a gig...
There shouldn't be any problem in fitting that size project on a single layer project...
Steff
G5, D2.0, 5G-ram, 250GB+500G lacie, X800XT Mac OS X (10.4.3)

PP3 CS3 EXPORT HALF FILE SIZE ONLY ,SHRINKEN FILES FIT SINGLE LAYER DVD ONLY

Hi!
I've regently upgraded up PP3 CS3 , Which was exported half of the files size only . I created 1 hour video/audio project on PP3 , then EXport to Encore CS3 , and check Encode setting , at the bottom right side ( ESTIMATE FILE SIZE) is about 2200 MG .Event I switched Sinle layer or Dual layer the files size Estimated the same amounth .
I created anather 2 hour video/audio project,Exprt to Encore cs3 , Estimate file size about 4 gitbite , It fited single layer 4.7 dvd only
The DVD quality play back on DVD player is only half of the original footage .
Encore cs3 is the same issue , when I forced double file to 8 gibite to burn dual layer DVD . It got error (unlimited of disc).
I could not find any setting to make it work on PP3 cs3 and Encore cs3
I have previous PP2 , It could not build straigh 2 hour DVD , But It could make 1 hour each time with original my footage or very close I'm happy with that ,Build ISO folder , each file is about 4 gibite then I used 3rd party software NERO 7. put 2 DVD together about 8 gibite and burn to Dual layer DVD
I red manual book on page 42 encore cs3 , they do not make daul layer
I paid upgraded PP3 CS3 and paid full price Encore 3 . They 're not worth what I invested ,
Any help will be wellcome . Thank you

Hi Millaard
I repeated again build my project in PP3 1 hour and 8 munite long video , Exprot Encore , I selected following setting as Type : DVD doule layer,
Direct burn without menus
Encoding setting : Preset :NTSC progressive high quality
or Medium qality
Video codec : Main concept MPEG VIDEO
Birates setting : VBR , 1 pass
minimum : 1.5
target : 4.
Max : 7.
GOP : M frame 3
M frame 15
Estimate files size : 2684.98 Mb
That 's all the setting I did , Whatever I swicthed single layer or double layer , the export file estimate no change .
If I tried longer video 2 hour , the estaimate file size is about 4. MG ,PP3 shrinken video file to fit single layer DVD 4.7 . The file size of 2 hour dvd good quality is about 8 gibite for dual layer DVD
The other option in PP3 did not work for any 3rd party sofwarer ,
It did not build ISO folder , and MPEG2 dvd did not build Video-ts at the root of dvd folder ,and both video and audio is splited could not use third party software , they exprot to Encore cs3 only
Then Encore did not burn more than 4.7 single dvd for 2 hour long half of quality
Millaar ; Please tell me what's your setting? and how many mb did you build on sing or dual layer ? Have you tried any yet ? Thank you

Project to big for a single layer dvd??

HI Guys,
My source file is a PAL dv quicktime that is 1 hour and 25 mins. I have encoded the file in compressor as an mpeg 2 5.0 mbps which was a preset in compressor for a timeline of up to 120 min. My source file is 85 min. Once imported into DSP I have had an error saying the project is to large for the single layer dvd I am trying to put it on. I already had an encoded version of the file that was made in DSP at the default SD settings, 4.0 mbps I beleive, so I put that back on my timeline and am still getting the same error message.
My compessor created file is 2.96 gig for the video, audio 928mb, the dvd studio pro files are; vid 2.37 aud 928mb
Any suggestions to help sort this are appreciated.
Thanks, Adam.

Try to convert the audio to AC3 file, that should be a quick fix.
Do you have motion menus or any other elements? 2.96 and 928 should bring you in fine (take a look here http://dvdstepbystep.com/faqs_2.php - which way are the numbers - the larger or smaller when using Get Info?)

Backup Leopard Disk on Single Layer DVD

I have a leopard disk with the original 10.5.0. I want to make a copy on a single layer disk. I followed the instruction here: http://www.scribd.com/doc/431468/Guide-to-making-a-SLDVD-Leopard-install-disc
Everything works fine without a hitch. After I burn the disk it mounts fine and appears bootable in the startup preference pane, however, when I attempt to boot from it, (by restarting and holding the "C" key or holding the "option" key to select the disk) it does not appear as bootable. If I hold the "C" key it sounds like its scanning the disk, then it just boots from my hard drive. Also, if I hold the "option" key, only my OSX and Windows partitions appear, not the inserted Leopard copy. Please NOTE FOUR things, I want to have this on a disk, so please do not suggest restoring to an EXT HD or flash drive. Also, I have attempted the burning process with Disk Utility and Toast. I am using DVD-R disks and 10.5.7 on a Unibody MacBook Pro
Thanks for the help,
Macguy3000

Since this is not supported by Apple, I suggest you contact whoever published this and ask them why it does not work.
Your self-imposed limitations preclude doing it correctly.

Maximum Duration on single-layer DVD?

Does anyone know the maximum duration or movie file size that can fit onto a regular single-sided DVD when producing a DVD in DVD Studio Pro?
I poked around using various search terms but found nothing.
thank you!
r

As Eric said, you can really fit loads onto a DVD-R if you compress it hard enough. You can even use MPEG1 and get even more on there, although the final quality won't be great. Compress all images, audio to AC3 and so on too - it's all about how small the 'fixed' assets are, how much space you have to play with and how to compress the video you've got so that it fits into that space.
I have never seen a precise rule for fitting video to a disc... If you want 3 hours, use AC3 at 192Kbps and compress at around 3.15Mbps and it should work. If you want 4 hours, drop the compression to 2.3Mbps... remember that the lower you go, the poorer the final result.
How about using Half D1 compression? Tools like Bitvice can create this - you get a better quality than MPEG1 (IMO) and yet about the same file size.

Backup the iLife '06 Dual-Layered DVD onto Single-Layered DVD-R

In another closed posting, someone mentioned that they were going to use Toast 7 to create a backup of the Dual-Layered iLife '06 DVD onto a regular Single-Layered DVD-R.
Does anyone know HOW to do this? I have T7 and can't figure out how. I want to accomplish the same task. But it seems to me that if it breaks up the installer between two DVD-R's, then how can you use these 2 DVD's if the original goes bad? Please explaine.
thx.jas.

When you span the discs using Toast, the program
(Toast) copies a program called Roxio restore. You
would open this program up and let it do its magic
and combine both DVDs into one again!
So then does that mean you'll need twice the hard drive space available?
I mean, it seems to me that this way Toast would need to copy all the contents of the DVD's to your hard drive to combine them. Then once on your hard drive you can run the installer. So instead of needing ~6gb of available space for the normal installation, you'll need ~12gb of available space for the copy AND the installation (then, of course once installed, can trash the installers freeing up that original ~6gb of space).
If this scenerio is true, and one doesn't have ~12gb of available space, then what?
This doesn't seem to me to be a very good option.
thoughts?
-jason.

I want to install osx 10.5 server on emac g4 but a single layer dvd is smal

hello i want to install osx 10.5 server edition on my emac g4 for learning purposes but 1 dvd is to small to burn osx 10.5 to so my question what must i do to get osx 10.5 server on my emac g4?

Most Macs with DVD readers can READ Dual-layers, even if they cannot write them. Try the original dual layer release disc, and I expect that you will be pleasantly surprised that it can be read.
If you have 10.5 already installed, there is usually a .mpkg file on the release disc that can add only the Server additional software to a working 10.5.

Help fitting project on single layer DVD.

A little confused on how this adds up.
My DVD size is 395.4MB with all my menus, and AC3 audio with NO VIDEO.
When I add my video, which is 4.08GB to the timeline, my project goes up to 4.9 GB. Shouldn't it be around 4.5 total? Does DVD studio only add up what's in use in the assets window?
Thanks!

Factor in the size of the audio of your movie, if you have not already.
Keep in mind that if you use any of the stuff in the palette - shapes, buttons, etc. - DVDSP will render motion mpegs for the entire duration of the menu, even if the background is still. This may also be the case if you use DVDSP to composite multiple photoshop layers in the background.

Changing from Single Layer DVD to DVD+R

when I open Project Info Window in iDVD to change the type of DVD I'm using, I can't open the drop down window for DVD type. What am I doing wrong? or How do I get the DVD type to work?

Hi
It's not iDVDs faulth. It is depending on Your DVD-burner.
Most Mac burners are DVD-R burners but some can also burn to DVD+R.
Go to "About this Mac" then select "More info"
Now find Your DVD-burner and read what it can address.
My wtites:
ATA-3-buss:
MATSHITA DVD-R UJ-825:
Tillverkare: MATSHITA
Modell: MATSHITA DVD-R UJ-825
Revision: DAM5
Serienummer:
Enhetstyp: CD-RW/DVD-RW
Skivbränning: Stöds/levererad av Apple
Borttagbart medium: Ja
Borttagbar enhet: Nej
Protokoll: ATAPI
Enhetsnummer: 0
Sockeltyp: Intern
DVD-RW (or DVD-R and DVD-RW) and so it can't use DVD+R disks.
Yours Bengt W

My video needs to go on a SD DVD single layer-it is 1h 51m long-the only way I can make is fit is encode H. 264-not ideal-I am using the Share option in FCP-native media was shot 980x720...any other way to do this??

My video needs to go on a SD single layer DVD…it is 1h 51m long…the only way I can make it fit is encode H. 264…not ideal…I am using the Share option in FCP…native media was shot 980x720...any other way to do this??

To play on DVD Players, it has to be MPEG2.
It's under 2 hours; I'm surprised it won't fit. If not, get Compressor and lower the bit rate to fit.
The native resolution was 980X720…you mean 960?
It will all be resized to 720X480, which is DVD standard.
Russ

Problems Burning DVD's (Single and Dual Layer) with FCPX

I have been burning the same size and length DVD's every week on single layer DVD's and since the update I can no longer do it.
FCPX was great for the inexperienced user, Apple what have you done !!!!!
Because it now asks for a dual layer DVD I went out and bought (expensive) them and they won't burn either, it keeps coming up with an error message prior to completing.
I went through five of the dual layers and all had the same problem.
I need the program to be easy, it was and now its not.
Will there be a fix or how do I go back to the version prior to the update.

Is Share>DVD the only export option giving you trouble? Will it let you create a single layer disk image?
If sharing works otherwise, export a master file. Bring that into Compressor and choose the DVD preset. In the Inspector>Encoder>Quality you should be able to adjust the bit rate down to where it will ft on a single-sided disk.( As you adjust te slider, the "Allows" message at the very bottom of the Quality tab will change. Be conservative and allow a cushion.)
Russ

DL DVD to single layer DVD

Similar Messages

Maybe you are looking for