Dlink DIR-615 not finding connection?

Hi all, I just acquired a Dlink DIR-615 wireless network for my KDE run laptop and all seems to be good on paper but in practice i cannot connect to a web page.
i can find the box in my wifi, it shows as linked at 100%, yet on firefox it shows that the page could not be found!? ive been looking around but im not sure where to find the solution to the issue does anyone know what i could do to improve the issue? Let me know if you need more info im still green at arch if possible a little simplistic explanation would be much appreciated.
Thanks!!!

The good news is that I think your router will work just fine. Mine supports an Arch Laptop, a Macbook, a Wii, and an HP printer via wireless.
Are you using WPA or WPA-2?
Are you using TKIP or or only allowing AES?
Are you using b,g, or pseudo-n?
What is your laptop's wireless hardware?
In my case I am using the broadcom wl driver on an 802.11g link. I have the router configured for WPA-2 Only with AES encryption
When I was setting up my system, I found that if the encryption was mis-configured, I could connect to the router and could "Ping" it. Like you, however, I could not send or receive usable packets.
Here is my modules line from /etc/.rc.conf
MODULES=(hp_wmi !ssb !b43 lib80211_crypt_tkip wl acpi-cpufreq cpufreq-ondemand cpufreq_conservative cpufreq_powersave)
Again, this is for the broadcom wl driver. Notice that I specifically excluded TKIP encryption. The prohibition on ssb and b43 are required only if one is using the Broadcom wl driver.

Similar Messages

Wi-Fi access using DLink DIR 615

I just bought my IPad this Saturday. Can't get Wi-Fi access using my DLink DIR 615 router at home. This router supports my brother's laptop w/no problem. My IPad works fine with other hotspots

Welcome to the Apple Discussions.
A few things to try when having issues like this, in order of use:
1. Make sure the router firmware is up to date.
2. Reboot the router by full power off and on.
3. Reboot the iPad by full power off and on.
4. Reset WiFi on the iPad, Settings > WiFi > forget the network and then reinstall the network info by hand.
It is very important to check and make sure the router is using fully updated firmware, especially since you said you are able to connect at other hotspots.
Hope this helps.
Ralph

HP 8500A wireless printer can't find my wireless network (but my computer does) using DLink DIR 615.

HP 8500A Wireless All In One has been working fine for ages (minor occasional hickups), but now can't get it to print. Computer still picks up my wirelss network fine. Printer works on all other stand alone pieces. But, one day it stopped printing, so checked wireless signal. Tried all steps and reports (have done that once in past a year ago and reset fine), but still get error saying it "can't find my network"... HELP

Hello there @Rico6952 , welcome back!
I read about how your printer is not finding your wireless network and I wanted to stop in to see if I could help you. I have some suggestions that I would recommend for you to hopefully help. Check the links out below. They are all related to network connection problems.
'Unable to Find Printer' Error Message Displays on the Computer During a Wireless Network Installati...
The Network Installation Hangs on the 'Checking Network Environment' Screen
When the printer is connected the network, use this guide to assign a static IP: Printer Does Not Maintain Wireless Connection
I hope this helps, have a great Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

A1irport card wont connect to Dlink DIR-615

I'm having exactly the same problem as described in this archived thread.
http://discussions.apple.com/thread.jspa?threadID=1690175&tstart=0
In my case, I have an original Airport card installed in an iMac G3 400. I can see my network and attempt to connnect to it but it never connects and says "there was an error joining "network name"". The thread above did not seem to offer any resolution to the problem. Does anyone have any ideas? I have the router set to allow connections to b, g, and n networks (I have a newer iMac to with an n card installed so need that).

Did you try turning OFF security on the router temporarily? Get it working without security, then turn it back ON.
Also, if security is turned ON, are you using the WPA security protocol? Most 802.11b AirPort cards support WPA under Mac OS X, but the earliest ones do not. They all support the earlier WEP protocol.
You may also want to reset the router. They often have a recessed button you can press to reset it. First, get the iMac to connect to router (that is using its default settings). Then, if any special settings are needed for your setup, change them. If the iMac stops connecting at some point, at least you know what setting change caused the issue.

Applications do not find connection after switching (wireless) network

When I move from one network to another, programs do not recognize that the internet connection works again. This happens to Opera and Spotify running in Wine at least.
Anyone know why?
I'm using NetworkManager and nm-applet.

Hi,
sorry if i lose you ... here is the story
node 1 - 10.100.1.201
node 2 - 10.100.1.203
vip - 10.100.1.202
when both server restarted, i can remote to both servers, no problem.
1. RDP to both node 1 and 2 together on their physical IP. Connected successfully.
2. checked the Active node on node 1. Perform fail over from node 1 to 2, node 1 RDP session loss connection immediately. checked on node 2, cluster node active on node 2. no errors.
3. perform node 2 to node 1 fail over. Node 2 RDP session loss connection immediately, node 1 session came back. checked cluster node active on node 1. no errors.
4. in order to have both can continue to rdp, perform restart on node 2 (the node cannot reconnect), after reboot, rdp back to normal.
5. firewall team confirm connection has reach server, server not responding to rdp apparently.

D-Link DIR-615/Macbook detecting but not connecting

This is my first post on the forum.
So I went on a vacation back in January for about a week, but during that week I unplugged my D-Link DIR-615 Wireless N router and modem (Toshiba, Time Warner), just so I wouldn't have people attempting to connect to it for any reason by any means. Fair enuf, right?
I get home, connect the mac, modem, router. Airport will detect the network, but will not "transmit" the internet, won't pull up any webpages.
Any ideas? I've checked the through some of the other posts, but it's kind of hit and miss.

This is because your Mac is connecting to your router but is failing to obtain an IP address via DHCP.
Is your Mac still set up to obtain an address automatically via DHCP?
If so, try the following sequence:
1) Disconnect from your D-Link
2) Power off the cable modem and router.
3) Power on the cable modem and wait until its status lights indiciate it is connected to its network.
4) Power on the D-Link and wait until its status lights state it is connected.
5) Try to reconnect to the D-Link on your Mac.

D-Link DIR-615 (Rev H1(!)) does not work with Airport Express?

Hi there,
I had my AirPlay working just fine with my Airport Express (AX) and my wireless N Router D-Link DIR-615 (Rev. B2). Now I changed my Internet provider and received a D-Link DIR-615 (Rev. H1) and I cannot find my AX anymore (I mean, it's still here, but the AirPort Utility cant find it!)
Are there known issues between those two?
(The Rev. H1/B2 is the Hardware Version of my D-Link DIR-615. The Firmware is up-to-date (8.01 I think))
The status light is a solid, beautiful green.
I already tried the following:
- restart the AX, the D-Link and my MacBook (10.7.2)
- changed from AES to TKIP (found that somewhere in the internet)
- Reseted my AX to factory settings and configured everything new. (via Ethernet)
Probably interesting:
- After resetting to factory settings and configuring everything new, the AX showed up in iTunes, but when I tried to connect with it, it kept me waiting for 1-3 Minutes and simply did not connect w/o error message. The AX disappeared after restarting iTunes.
I'm running out of solutions..
Anyone a good question/suggestion or answer for me?
greetings
squob

Only way I see out other than waiting, is to hook he Drive to a Mac, (FW preferable for speed), then get Tri-Backup...
http://www.tri-edre.com/english/tribackup.html
Which can be set to trigger Backups when Shares mount.

Unable to connect to DLINK DIR-825 router

I am trying to connect to a condo public wifi which uses a DLINK DIR-825 router. The network name and password is posted. I select the network in my wifi settings, and enter the password, and the iPad returns "Unable to join. Incorrect password". I have shutdown my iPad, restarted the router, and attempted to join the network several times, to no avail. Password is PSK2.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Dir-615 wifi connection problem

after reconfiguring my router my win7 notebook sees the router but will not connect. my win vista works ok. my win7 will connect to a nearby netgear router ok. any suggestions?????

Welcome to the Cisco Home Community.
We appreciate your trust in the community however, this is not the appropriate place to post concerns from a competitor brand. We suggest using Google in searching for the appropriate support channels for the DIR-615. Thank you for understanding.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Airport Extreme Card wont connect to D-Link DIR-615 (wireless N router)

Hi, I got an old Mac G5 that has the airport extreme card in it and can't connect to the internet through with my D-Link DIR-615. I tried a couple options on a MAC but didn't work. I have a Laptop running Windows Vista and had no problem connecting. I'm using WPA for security and my password has 31 characters. Do you guys think That I have to change the length of my password to 26 or even less? Is there any guide that you guys may know that cuold help me on this issue?
Thanks a lot.
Masrocha

Password
40-bit hex
40-bit ASCII
128-bit hex
128-bit ASCII
LEAP
This would be telling me that your G5's AirPort is NOT "seeing" the D-Link's wireless network as encrypted with WPA, but with WEP instead. This typically can be caused by either the D-Link's current configuration is incompatible with the AirPort card or that there is something amiss with the AirPort card itself.
BTW, My D-Link has WEP, WAP-Personal and WAP-Enterprise
Ok, we will want to stick with either WEP or WPA-Personal.
We now have two choices: 1) Continue to troubleshoot additional configuration changes to the D-Link to try to get WPA to work with your G5, or 2) Switch to the lower strength encryption: WEP.
Which would you prefer to try?

Iphone and Ipad are not detecting airprinters with Dlink DIR-651

Since changing my router to a Dlink DIR-651, my apple deivces are not detecting airprinters.
Dlink says I need to open ports on the router.
Please advise.

Hi..I've had a variant of this problem; my internet was accessible but my devices on wifi could not see the PC on Lan. That meant no iTunes syncing, Airplay from iTunes etc.
Dlink has a strange default setting that isolates Wifi & Wired connections into different subnets.I'm assuming you have DHCP setup on your router and you're PC or MAC has internet access via the same router. Try the following steps to see if this solves the problem for you; first Log into your DLINK admin page-
1. Go to Setup -> Local Network and Uncheck the box that says 'Configure the second IP Address and Subnet Mask for LAN' - Hit Apply
2. Go to Wireless -> Wireless Basic and Uncheck 'Enable MultiAP Isolation' - Hit Apply
3. Restart your Router
You do not need to port forward. Just get the Wired & Wireless devices on the same Subnet.
Let me know if this solves your problem. I've been frustrated by my problem for months & had nearly given up.
J

Query engine : Can not find DSN in Connection String

DearSir/Madam,
Opearating System Windows 7 Professional(32-bit).
I am using Application, which is developed : Visual basic 6.0(32-bit), Report Writer : Crystal Report 9.2.693(32-bit) and database: Oracle 9.2.0.10(32-bit).
ODBC Data source : System DSN created and Connection established (Based on Driver : CR ORACLE ODBC Driver 4.10 (cror818.dll))
In windows 7 environment Data Base connectivity and data fetching also wroking fine.
My problem is while running reports it display error as "Query engine : Can not find DSN in Connection String"
I want run time reports.
For your kind information, at the same time in Windows XP Professional there is no problem found and working fine.
Kindly help me.
Thanks and regards,
Swarup

Crystal Reports 9.x is not supported on Win 7. See the following wiki:
http://wiki.sdn.sap.com/wiki/x/b4JiAw
- Ludek

HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden

I am constantly receiving an error message that says "Could not find a PPPoE Server." My wireless internet connection seems to working fine, I'm not having any issues. How do I get rid of this error message?

A few weeks ago my computer had lost the connection to the wireless internet. I set it up again and was able to connect to the internet, however since then I've been receiving an error message "Could not find a PPPoE Server." I went back into Preferences and unchecked the PPPoE server option but the error message still pops up.
Any idea how to fix it?

In the Network pane of System Prefences, do you have duplicate services on the left column? When you "set it up again", you might have duplicated a service and both (the good working one and the previous that lost connection) might be trying to connect at the same time.

Dlink DIR-615 not finding connection?

Similar Messages

Maybe you are looking for