Dlink Network Card Help Please

At my school in the radio and tv classes we use the network to tranfer video files and such. One of the G4s built in ethernet card has broken pins. My teacher bought a Dlink DFE-530tx+ and I'm in charge of getting it working.
I've installed the PCI adapter, and I installed the drivers. The problem is I can't get the card recognized in the Network Preferences. Has anybody had any experience with this card?
Any help would be great, thanks
-Jason

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect OK?
Did the iOS device connect OK before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>General>Dae & Time and make sure the time. date and time zone are correct
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

Hi their is a code 10 error appears on my network card driver please guide me how i can fix that....

I have Thinkpad T41 As my network card drive installed after installation the driver the system suddenly shows "This device can not start (code 10 Error) Please guide me how i can fix it

Hi VanessaLovery,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand your notebook works fine on battery, but performs poorly on AC ,after taking it to a repair shop to have it cleaned.
Here is a document on Troubleshooting an Overheating and Auto Shutdown Issue.
Have you checked your performance plan to ensure it is set to balanced Managing Power Options (Windows 7 and Vista).
Have you tried a different electrical outlet?
Are you using the AC adapter that came with your notebook?
On startup if you press the F2 button approximately once every second, you should be able to enter the HP advanced diagnostics window, to test for hardware failures. Testing for Hardware Failures (Windows 7, Vista).
If you would like further assistance would you please provide your exact model of DV 6 and the Operating System you are running. How Do I Find My Model Number or Product Number.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Mac Pro - Mavericks - suddenly "lost" WiFi hardware/Airport in Network Prefs - Help, please!

Suddenly my Mac Pro fails to recognize the Airport/WiFi card in Network Prefs. Not in the option palatte to add back in, either.
System Information:
Wi-Fi: "
Software Versions:
CoreWLAN:          4.0 (400.45.1)
CoreWLANKit:          3.0 (300.35)
Menu Extra:          9.0 (900.34)
System Information:          9.0 (900.8)
IO80211 Family:          6.0 (600.34)
Diagnostics:          3.0 (300.37)
AirPort Utility:          6.3.2 (632.3)"
WWAN:
     "No Wireless Wide Area Network could be obtained for this system. WWAN is wireless connectivity through cellular tower technology. Please connect a WWAN device and try again."
Thanks for your help.

http://www.xlr8yourmac.com/feedback/802.11ac_Mac_adapters.html#storytop
Some info at the above link on various wifi upgrades. If you are having USB issues, maybe the Asus PCIe card would be worth considering. Otherwise, I'd suggest one of their USB adapters (I have two).

55UL605U Network setup help please

Ok so we've had this tv for weeks now and no matter what I try, I cannot get it to connect to my home network. Could someone please help a newbie to get this connected? PLEASE

Hello,
01: If Macs, this may be important...
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
02: The beauty of the guest network - and the whole point of it - is that you get two separate wireless networks for the price of one AirPort base station. The traffic is segmented and isolated, so users connected to the guest network can't see or detect the traffic on the primary network, and vice versa.
http://www.macinstruct.com/node/541

NETWORK setup-HELP please !

tried to access search & articles w/o success.
i have 2 G4s wired via ethernet to a d-link router that yes does have both G4s working as far as internet.........but i am very confused about what is 'Server - Network - File sharing ' etc.
when i first hooked this up i got G4 #1 to.......GO> connect to server >choose HD1 or HD2 (from G4 #2)
it was listed in 'mount to volume'.
now i have a weird problem, after [connect to sever] it simply WILL NOT connect thru my REGISTERED USER......only thru a [guest], and then it will only mount to 'somthing' i have named and offers DROP BOX only.
OK technically i can 'file share' (i think) by using this....BUT what i really need is for BOTH G4s to be able to connect or 'mount' to the HDs.
i have seen this work allready once on G4 #1 but #2 never did.
things that seem important.
-volume to mount
-admin name
-rendevous name
-work group
-apple talk
-IP address
so what did i do when i had the HD in my network, was that a server or file sharing ??????
when im in an app like FCP i can easily import or open from ANY HD......'drop box' doesn't appear, so you can see why thats important.
Each G4 has a seperate address....00 -01.......but when i enter that i get an error -36 (still can't find error list)
when i try to login as registered user i get LOGIN FAILED.
-since i don't use a password i am wondering about......'log on is disabled'.......what is that ?
i remember in other apps when there is a problem it says to TRASH YOUR PREFS.........coult that be an issue here ?
i have never used passwords and then i engaged the lock and restarted and it would NOT open w/o a password.......so needed to re-do one from install disk, im thinking that could have stuff-bad data stuck somewhere like 'keychain'.....so w/o doing a total re-install, how can i start over basically eliminating all the crap i have done ?
But my main question is.....to see the other HD from connct to server.....is that 'fileshareing' or simply a network, i don't get it ?
Any help would be great.
-dave

Cornelius & Gerald......
Wanted to express my sincere appreciation in walking me thru this, offering your ideas and insight, but mostly your support....just knowing your real people (gentleman) that took a moment to offer what you could and were there with me thru the duration.......to me thats 'support'.
As fun and rewarding and at time frustrating it is to work as a MAC person, a minority im proud to be proud of. Not so much for the 'magic' of the techknowledgy that at one time was very special......but now that magic in my opinion is in the people, the community which you guys just reminded me of.
The current {MAC vs. PC} ads on TV reveal a 'part' of the many unique differences between the potential computer buyers.........MAC is young & hip, simple yet powerful, a symbol of yourself in a way. The window's based PC is complicated, designed for boring application,suseptible to illness....very much like why are parents drive practicle & boring and we drive the Super SUV that gets you there in style, can haul your boat as well as become part of your business.........
Well as we all know..... many of us being older, single parents, running a biz that wasn't even thought of 10 years ago, surrounded by hi-tek gear EVERYWHERE probably would agree that its NOT the computer or even the software....its the USER who makes it special !
It was 1995 and all my dreams of building grand set-designs for special events were put on hold cuz of spine problem that caused me chronic-pain and would be just too much to build and be responsible for.......thats when i discovered a dormant passion for video.
A friend worked at local PC discount ctr. and deducted his comm. and i got my 1st PC-clone, pre-pentium, no power or memory, but at the time, like every other idiot i was happy w/this box.....it controlledmy music keyboard and drum machine, learned that basic concept of what a PC allowed folks to do. To compose a pristine document, w/spellcheck...wow. A fax app that could fax lists of numbers......you could see how this overgrown calculator can transform a biz in your garage and make it look like a huge pollished corp........but what changed everything for me guys was this simple gadget that i first saw demonstrated on HSN home shopping, and boy was i sold. It was called SNAPPY* and for $100 you plugged this into your parrelel port and Viola'.......i had access to litterly anything ! It was simply a capture device that used RCA in's.......so that meant anything from your VideoCam/VCR and that meant ANYTHING you could record, turned my 1st RCA OmniMovie cam (pawn shop $300) into a 'moving scanner'.
It was one of those magical momets in life where you become drunk on inspiration....all the potential, all the images i could get inside and then real excitment imerged when realized that this wasn't just a media capture device but very sophiticated paint-photo retouch application. This was so new to me......my first ever computer exp was at 'kinkos' copy shop using the first MACs and i remember a simple way to add color by hand and maybe at that time i was impressed by that.......this was called Fauve-Matiste which i used before Photshop which if i remember that was something you went to commercial art school and then a ad agency to use the elite Adobe products........this was doing retouch right in my own home. I recall the brushes could mix and blend multiple colors paint, an effct i still havent seen in PS.
I remember adding space and stars around faces, making wild collages using various images i would blend and layer. The project that really affectd me was a still of the bus in the movie Speed where it crashes into the parked Jet. Seeing rear of the bus all surrounded by flames i gave my self an assignment to add smoke clean up blurlike im prepping for a poster........that was such a huge thing for me. I had became pretty good at real air-brushing, but this was so controlled, no changing messy paint, clean up or mistakes that are difficult to repair, in the PC you un-do things that don't work (theres time in real life i reach to UN-do a task and realize.....duh) So I knew computeres were special in some way, they could 'run things' like machines, robots......but home PC had some limitations and when your young and nieve the limits can be as simple as your knowledge of whats available. Video games didn't impress me cuz i have never seen a game that brings a group of people into it, always 1 player then another.....I would rather do something creative that where the music MIDI interface was the first 'wow' i felt.....then the capture and paint.
The reason im giving you this backstory is right at this point is where my creativity w/ painting/retouching captured stillsand my search for what else can i do w/this box led me to wanting to start editing these still projects into other creative projects. Keep in mind 'cable access has been around for several years and a great way to get exposer for any AV project you put some time into......considering all the cheezy crap i have seen on there I kick myself for not following thru. My biggest part of any creative endevour art or music, if no one else ever is exposed to it, no other feedback, its like the most important element is missing.
Thats when i began to put 2+2 together and see that video, moving pics are gonna be important, and other then COPS-MTV there wasn't the range of reality TV we have today. The reason thats important, some very smart people thought FILM based projects whether animation shorts or documentaries whatever would always be the norm that VIDEO could never cut the mustard......and if you remember how bad early anolog video was, even Hi8 w/ pro lighting in the adult ent. could look pretty bad........so once DV entered and could be edited non-lin, OK the local news had good video quality but cost what over 100k and that old way of A/B roll was all changing. So my point was even though there were video cards for my old PC that actual footage would have been a few seconds........thats when i made the call !!!!!
The point for this yaking rant.
Instead of calling places that sell video gear (they sell you-what they want to)......i looked in the YP for companies that 'shoot-edit' produce professional video.........and thats when i heard those infamous words.
"People who do pro work use MACs'
Honestly at that timei had no real idea what made one diff from a PC. I new that this thing called Pentium was gonna be big, but i ask around about using PC for video and never got the feeling like they were made for that even though some apps claimed they could work......i remember some guy talking about [Jen-lock] which i think is what the news uses for editing, it doesn't capture ALL the footage, more like 2 videocams pluged into a VCR can do simple edits and i did make a few of my first video projects that way and that was cool........but the person at the video production who made it clear that MAC is the only way to go if your serious also mentioned that there are 2 new developments that are a huge deal.....1st being the G4 ready for video w/ Firewire and then the application designed for it Final Cut Pro. All you need is a DV cam w/ a FW port and you'll be set kid.
Of course i had no idea what any of this meant or how it would change and dominate the next several years of my life. But for all the times i never listened when i should have, this time i felt i new something that i should keep in mind........so when my father who became ill and needed a care ctr decided to give me and my sisters a substatial some money i wanted to make a smart decision, not blow it on a car or trip or whizz it away on chasin girls, he said to me why not go to some tek school for video, get a degree. That sounded like a great idea make him proud in his final years, so i called that same guy up and asked a few more questions trusting his insight.> He told me that first off the teachers won't know this application, they will be learning it as you do, and it would be unlikely they will have the newer G4s......which means you spend all your cash........you now will learn at the pace the instructer does, he might have great knowledge on camera operation and lighting, but that can be learned other ways. Then if you don't live on or near campus you will always be fighting for MAC time probably on the older G3 and the most important thing you can do is spend time w/the proper gear. Sure being around other creative students who have passion and talent is very important, just like having access to real pros who know the biz old school........but if you have either or........invest in your own gear, you add a 3chip Canon DV to that setup and a few other things you willhave your own Digital Editing Suit that you can learn at your own pace and have access 24/7.......while those guys are fighting for time like a laundry mat you will master the basisin no time and then get to the place where its 'your creativity' that counts......you put that on your demo reel and if you've got it......that degree won't matter. Sure if you can do both, own your DVE and also have the class atmosphere cuz your gonna need people to help in your productions.......but if your excited and motivated you should be able to find plenty of people to work with.....hang around that class and any others to make contacts, but own your own gear. While they are paying back school loans you will be able to charge for your services.
So thats my story i wanted to share with you guys and how ultimatly even w/o class mates to learn with......having a 'world' of fellow MAC users who are kind helping and loyal to not only their MAC of choice but the apple community and support friends they have never met but share a unique kinship in the elegance of what can this sleek machine add to our lives......and if we need help or ideas there someone out there has gone thru what you have.......and that almost always means it leads to some kind of success.
Anyway i would really like to hear what projects you guys work on.....what led you to being loyal to MAC or experience's that made it clear your glad you did........and are the current MACs still special compared by speed-power-reliabilty-ease of use ?
So again thanks for that support.......comcast wanted $150 plus $5 a month stating i would need their support........thast just too much for a simple router i found for $19........and w/ your help go it going.....having no support, no MAC community is when i feel overwhelmed and that steels my creativity away, so that why i shared allthis........i shows how important you all our.
so thanks again.........share a bit yourself......i look forward to it.
-dave

In need of an external home network drive, help please...

Hi,
I am in need of an external home network drive in either 1 or 2TB form.
It will be for an imac and macbook pro + ps3 to use.
I saw this Western Digital one but was not sure how good it is -
http://www.wdc.com/en/products/products.aspx?id=300
I would be using it to back up HD final cut pro files a lot as well.
Please help.
Cheers

Ralph Landry1 wrote:
Over on the Tiger group one of the big hitters had unkind words for LaCie...becomes a matter of personal experience.
aye, indeed.
that's why i suggested the OP searches the forum for information on both drives
personally, i swear by LaCie drives. i like drives sold by [OWC|http://eshop.macsales.com/shop/firewire> too. alas, they seem to have no NAS on offer ...
JGG

Server 2012 R2 Hyper-v two node cluster network connections help please

I am trying to do a hyper-v failover clustering project and we have following hardwares:
2x HP DL 380 G8 with 8 LAN ports
1x HP MSA 2000 with dual controller (each controller has 2 iSCSI LAN ports)
2x 24 port gig switch (HP Procurve)
I don’t know whether this is a best practice but I would like to setup separate network for live migration, iSCSI, heartbeat & data/management. So far I have installed Server 2012 R2 datacenter on both servers.
MSA Controller A port 1 is connected to Switch 1 – Vlan 1
MSA Controller A port 2 is connected to Switch 2 – Vlan 2
MSA Controller B port 1 is connected to Switch 1 – Vlan 1
MSA Controller B port 2 is connected to Switch 2 – Vlan 2
For each server is this how network connection should be? Ports will be teamed.
2 ports for iSCSI – vlan 3
2 ports for Live Migration – vlan 4
2 ports for Heartbeat – vlan 5
2 ports for Management/VM – vlan 6
Please advise if there is other better options.
Any help would be much appreciated, thank you.

Watch this webcast from TechEd, it will answer your questions:
http://channel9.msdn.com/Events/TechEd/NorthAmerica/2013/MDC-B337#fbid=?hashlink=fbid
Thanks!
Elden

Macbook Internet Network Hacking (Help Please!)

Hi, Thanks for looking... I am concerned that my apartment neighbor (a computer network engineer) might be trying to hack my Macbook and snoop around with my internet usage, and possibly access my Macbook remotely. Could someone please answer a few questions to ease my concerns please? (The Macbook is connected directly to the broadband modem and there is no wireless internet involved.)
// I suspect he might have gotten physical access to my broadband modem and seen it, is there any information on the modem itself that would give him access to my macbook and internet usage? (The modem says: cable RF MAC Address... and a serial number)
// How easy is it to hack a specific Macbook? Say if my neighbor was indeed a hacker, and wanted to mess with me for whatever reason, would it actually be possible to find out my internet IP address (could he hack the ISP?) to snoop around with how I use the internet? (The Macbook now has the firewall enabled and file sharing, etc. switched off.)
I know very little about this computer networking stuff, so I'm thinking the worst scenario is happening (which is hopefully far-fetched and exaggerated.) If anyone could help me by sharing their knowledge that would be an awesome help! Thanks!

Depending on the router, it may be very easy for him to hack it, whether he has seen it or not. If you believe this may have happened, see How to manage a hacked wireless router.
As for hacking the Mac, that's not a significant concern unless he has had unmonitored physical access to the machine. If he has, the only way to be sure he hasn't installed something to monitor you is to erase the hard drive and reinstall everything from scratch.
If he is able to get on the same network as you - which you should make sure to prevent by securing your wireless router - be sure everything in System Preferences -> Sharing is turned off. If you must have a service there turned on, be sure it can only be accessed using a strong password.

Lenovo pci card help please

hello all
please can someone help me i have a lenovo H330 decktop pc 2/3 years old
it has 2 x 2.0 usb ports in front i want to replace with usb 3.0 pci card is it possable
or will i have to replace ports at rear instead
also were would be the cheapest place to buy amerzon or maplins ?
also what one do i need to buy ?
thank you paul

hi Paul,
Welcome to the Lenovo Forums.
Looking at the IdeaCentre H330 specs, the machine natively supports USB 2.0 only so you cannot replace the front USB ports with USB 3.0. However, you're still be able to add a USB 3.0 port by getting a PCIe x1 USB 3.0 card.
- Link to picture
If you're planning to use more than 3 USB 3.0 devices at the same time, you will need:
1. A USB 3.0 PCIe x1 card (like this item).
Note:
The card requires a 5V external power. If there's no available molex connector on the machine, you will need to use the 5V 4 Pin Male Power Connector and set it up as shown in this picture. After setting it up, load up the cd and install the driver.
2. (Optional) For convenience, you can add a USB 3.0 Extension Cable.
I'm not familiar with amerzon or maplins but you can try getting these on amazon or a local retailer.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Connected network drive help please

On os x snow leopard i was able to open finder and my network drive would show up on the navigation bar on the left.....
Since i upgraded to lion i clicked the "command" + "," to make sure that it says "connected servers" is checked to be viewable...
I cannot see my network drive still..... please help.

Ralph Landry1 wrote:
Over on the Tiger group one of the big hitters had unkind words for LaCie...becomes a matter of personal experience.
aye, indeed.
that's why i suggested the OP searches the forum for information on both drives
personally, i swear by LaCie drives. i like drives sold by [OWC|http://eshop.macsales.com/shop/firewire> too. alas, they seem to have no NAS on offer ...
JGG

Graphics card help please

Hey guys I asked for help recommending a video card but I am afraid I need more help.
I have ordered the Sapphire X800 XT VIVO PE and should be with me in a week. I decided on this card over the 6800 GT and Ultra as from a lot of benchmarks I have seen it runs at faster frame rates at higher resolutions on current games (1600x1200) such as UT2004 etc.
However obviously the card isn't cheap and I want to make ABSOLUTELY sure I am doing the right thing. The 6800 Ultra and the X800 XT-PE are the same price so I can go with eathier.
The reason I am asking is from what people have been talking about is that the 6800 card may have better technology in the long run and so in future games it will perform better where as the ATI X800 XT is more solid in current games.
I want to future-proof my computer the best I can with my money for all the latest games (Doom 3, Half life 2, Vampire Redemption, KOTOR Sith lords etc).
The 6800 Ultra taking up a PCI slot also isn't an issue for me.
I want your opinions please on what card will be better overall. I know the GT is the best option for price/performance but I want the BEST card, price isn't an issue (for once).
Any advice greatly appreciated, help me spend my money wisely

Nevermind guys have cancelled the X800 XT and have a BFG OC 6800 Ultra 256mb on the way

I can't use my VISA card - help please

Hi, I have a normal debit card which I use all over the internet, abroad etc. But suddenly now, this one doesn't work. It keeps me saying that my card is not a registrated card in the Czech Republic, and so it does also with my travelling debit card.
Do you think this is just a system failure becouse the czech iTunes service was started on Thursday?
I had a problem even with signing up to the Czech iTunes, becouse when I got to my card and billing information, when I wrote my card # and the 3-digit code, a dialog box popped up informing me that iTunes servers cannot be connected - so then I choose NONE as a payment method, but now this is happening...
I beg you for any help, thanks.

To clear your Balance and Change Country...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

MacBook pro can't find any wifi networks. HELP PLEASE

Ok so my late 2011 MacBook pro15" starTed dropping out of my network every now and then. Rebooting it got it hooked back up again. Now just a few weeks ago its not picking up any real wifi networks (according to my phone and what my computer showed me before there's a bunch in range). It shows this network called setup as the only wifi network in range and when I click on it, there is this little grey picture of a computer where the wifi bars should be.
Xbox, phone and all of the roommates devices are hooked up just fine.
I've taken it out to a couple of coffee shops and its the same thing. Either seeing no networks or that setup thing.
I've tried restarting, verify and repair disk, deleting all of my preferred networks. I don't know what else to do.

Also I've tried to use one of those usb WiFi adapters that essentially bypasses the computers airport card. That shows all the networks in range but will fail to connect to any of them.

Express to extend network - setup help please

I would really appreciate some help ensuring i have the correct set up for my express (x2)
I have a mac, macbook, sky broadband modem and a basestation
I connect to the internet using the modem and network "sky 13222".
The basestation has a network id as well "af506f", but i dont use this to connect to the network.
The idea for the 2 expresses was to expand my range into a weak reception of the house for one; and to connect my new pannny bluray player with the other.
I have plugged the first one in and it has showed up on the airport utility f9567b, but when i go to configure it suggests switching networks, which i am unsure about the next steps...the guide doesn't help really..
Anyone with a recommended setup for this?
I am not sure the setup was right before the expresses but i could connect wirelessly to the macbook and my wii ok...
many thanks in advance

Hi, to set up the airport the computer has to connect to it hence "switching networks"
Once you added your new Airport to the your existing network then you should be able to switch back and it may all work!

Dual Displays, and Dual Vid Card Help Please :-( 30'' Cinemas

Hello all, I just recieved my 30'' Cinema Displays from the Fedex man this morning and am having a bit of trouble getting everything up and running.
My System is:
Windows XP Home
AMD Fx-57
2GB Corsair XMS DDR 400 Ramm
Asus Asi-8 Premium Board
Dual Evga 7800 GTX 256mb PCIe x16 Cards
Currently at my disposal to make this work I have:
2x 30'' Cinema Displays
2x Evga Nvidia 7800 GTX 256mb PCIe x16 Cards
I say this because no matter what I do I cannot get both moniters to function properly.
At first I had had both cards in my desktop running SLI, and I attempted to plug in the monitors, neither would turn on when I booted up the pc, I tried every array I could possibly think of to even get some activity out of both, or even a SOLO monitor with the cards on SLI Mode.
Eventually I just grabbed one of the cards out, so that I was running on a single 7800 GTX card.
WHAM both monitors booted up normally heres the problem Im now faced with, in this mode I can set one monitors resolution (whichever monitor I have set as primary) to the normal maximum allowed by the 30'' Cinema.
The problem comes when faceing the other monitor which is stuck at 1280 x800, giving a very wierd look and panning feel.
Is there any way at all to make theese work?
I dont care If i have to go down to 1 card, or even go buy a new card
I just want both monitors to be running at high res.
Thanks a bundle,
Nick

You have to look at the specs for your video cards, but it looks like your video card only supports one dual-link DVI and the other connection is single-link DVI. You need a card with dual dual-link DVI outputs. I believe the high end ATI X1800 and X1900 video cards support this.
I'm not familiar with SLI to help there.

Dlink Network Card Help Please

Similar Messages

Maybe you are looking for