DLL errors @ boot after Lenovo software update. (E530)

Hi, My laptop wanted to do a update of the Lenovo software so I let it.
Now every boot up it comes up with two error windows.
DLL error's
How to get rid of this please?

Doing the first thing helped with the error messages a little bit. Also, editing the WPA networks allowed me to enter the passwords, which also helped a little with connecting when it wakes from sleep. I just ran software update again yesterday, and Apple now has an Airport Extreme update that addresses compatibility issues with WPA and WPA2 protected networks. However, I still had to reboot my router this morning to connect to the internet. Network diagnostics says that its connected to the network but may not be connected to the internet because it has a self-assigned IP address, and this most often occurs after a long period of being turned off or away from the home network connecting just fine on open networks.
The second thing, Applejack, sounds like a nice tool, but I'd prefer that this thing work the way it's supposed to, especially since it's only a few months old. Glad I bought Applecare.

Similar Messages

  • Brand New 27" iMac i5 will not boot after installing software updates

    I just purchased my new iMac 2 nights ago. I have been getting it setup with my apps, mobile me account, etc, and luckily just setup time machine and let it do a full backup.
    I just ran Software Update for the first time, and now the machine will not boot. It hangs on the grey screen for about 1 minute before the Apple logo comes up. About 30 seconds after the Apple logo comes up, the grey spinning gear shows up, and about 1 minute after that I get the grey screen of death (You must restart your computer).
    Any suggestions? A little frustrated here....

    If you mean did I receive error messages, No, I didn't. However, the desktop reverted to the default purple night-sky looking thing, my applications and such all disappeared from the dock, and I couldn't open any files or folders (you don't have permission to ...), etc. I tried signing out and back in, rebooting, using a second admin account on the computer, creating a new admin account, etc. I ran Disk Utility, hardware checker, etc. No errors were found, and nothing changed. I could see all my files and folders, but they had a small red circle in the corner, indicating "locked" or "no permission".
    I'll find the lines from the console log if that will help. The error showed up immediately and is in the computer's attempt to access the user/library/application support/sync services and same path to user/library/logs/sync services/log. (or something reasonably close to this. If you can use the exact path, I will get it) The link between my settings and files, and a password is apparently corrupted or something, so that the computer won't even let me change the desktop or any file, so I can't save, edit or discard anything, and can't drag files to another computer on the home network.
    At least I'm still under the 90 day warranty, so I can call tomorrow. At this point, the SMART check says the drive is good, so I assume it's software. The only things new are the three auto Apple software updates I installed yesterday, so I immediately suspect them. But who knows?
    Does this help you at all?

  • 17" iMac (Tiger) won't boot after latest software update

    I downloaded the latest Tiger software update on my 17" Intel Core Duo iMac a couple of days ago and after I hit Restart I can't get past the grey Apple loading screen.
    I've tried everything it tells me in the manual, pressing various combinations of keys as I turn the computer on, but to no avail. I also put Install Disk 1 in and tried to check hardware from that (pressing D) and tried pressing C too to boot from it, but nothing happens, just the grey apple loading screen. Of course, now the install disk is stuck in there too.
    Any clues as to how I can sort this out? I'm still under AppleCare, so if worst comes to worst I'll call UK support and see what they can do, but thought I'd try everything I could at home first.
    TIA.

    Hello,
    Try the Apple Hardware Test: http://support.apple.com/kb/HT1509
    Carolyn

  • Error message after running Software Update

    Please help. I cannot do the latest Software Update. I have tried multiple time and each time I have gotten the same error message. Here it is:
    "The update could not be expanded and verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs."

    rachelbeth wrote:
    I cannot do the latest Software Update. I have tried multiple time and each time I have gotten the same error message. Here it is:
    "The update could not be expanded and verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs."
    Welcome to Apple's discussion groups.
    I can't help with your issue as a general problem, but for the specific update to OS X 10.6.6, I'd download the updater directly from http://support.apple.downloads, then install it from the ".dmg" file. The specific links will be either
    http://support.apple.com/kb/DL1349 for the "combo" update or
    http://support.apple.com/kb/DL1343 for the update from OS X 10.6.5.

  • Error message after web software update

    Every time I do a software update of the OS on my intel macbook, and no matter what Apple decides to update on my computer, after I do the requested reboot, i immediately get a message onscreen that Norton Utilities has detected new software, and do i want it checked out to see if it is a virus.
    Is this message from Apple? I ask this question, because i have not loaded Norton utilities into my system. Perhaps stranger, I can not actually locate norton utilities on my hard drive. I did a spotlight search on norton and came up empty. Then i tried a search on symantec, which i believe makes this software, and came up with a folder in my library/startupitems folder called NUMcompatibiltycheck. Inside the folder is a file of that same name, plus startupParameters.plist, and a folder called Resources which contains two files called infoplist.strings and localizable.strings
    Obviously, I don't want to make a terrible mistake by trashing files that the system may need to run properly. Can someone out there tell me if NUMcompatibiltycheck is the source folder for my Norton Utilities message? If so, can i trash the whole folder, without affecting the OS? and is this something apple pre-loaded onto my computer as part of OS X 10.4?

    thanks for your quick reply. I did what you recommend, specifically trashing that folder I mention in my previous post. It may be weeks before I upload any new apps to my two macs, which is the only time this message from Norton ever appears. But I do have a good feeling this will solve it. I thought I'd better ask before trashing anything in the library folder.

  • Error -36 after running software updates

    I'm working at a new place that hadn't run software update in months. I just finished updating everything and now I can't connect to the server anymore. Everyone else in the office is connected, so it's just me. Also, I was connected a few hours ago before I started installing all the updates.
    I had security and firmware updates included. Any ideas?
    Also, the connection is being made with smb protocol, if that makes a difference. Thanks!
    Message was edited by: Libbalou

    most of the other computers in the office are PCs. There is only one other Mac. (that user is on vacation and I'm not sure if it will connect or not.)
    I'm not sure about the server, but will try to find out and post later. (I came in this morning and nothing has changed).
    Thanks again.

  • C1-01 not booting after failed software update

    I was updating my c1-01 firmware via ovisuite on my laptop. It got to a point when the phone is to restart but it got stucked there. since then when plugged to the computer via usb and the power button is pressed, a pop-up comes saying "hard ware ID missing, windows cannot identify the device plugged into the nokia flash parent. for assistance, contact the hardware manufacturer" Please help me wake the phone

    Try remove the battery for a minute or two if it fails return device to point of purchase or a nokia care point with your receipt
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Macbook will not boot up after running Software Update (Couldn't fix it)

    Hi there,
    I also have been experiencing some problems after running Software Update (Security update + Java) a couple of days ago. Similarly to Jandaf (http://discussions.apple.com/thread.jspa?messageID=9000023) I have only the gray start up screen + Apple logo + gear wheel constantly rotating. Based on the information provided in this forum I have tried some procedures which didn't solved my problem so far. Below I describe I have tried:
    1) I have booted using the installation DVD and run the disk utility. When performing the First Aid/Verify Disk I found some errors ('Invalid node structure'). But I couldn't fix the problem using disk repair (same problem 'Invalid node structure' 'Volume check failed'.
    2) I also tried to boot in single user mode (command + s) to run fsck -fy. It didn't work. I got the following message (last 4 lines):
    CSRHIDTTransitionDriver::probe: -s
    CSRHIDTTransitionDriver::probe: booting in single user .. do not match
    Extension "com.apple.driver.AppleUSBTCKeyboard" has no kernel dependency.
    Extension "com.apple.driver.AppleUSBTCEventDriver" has no kernel dependency.
    3) When trying to boot in safe mode. I got a grey screen with the following message:
    'You need to restart your computer. Hold down the power button for several seconds or press the Restart button".
    4) I also tried to 'Archieve & Instal'. Again no success. After reading the DVD the action is terminated because some errors (does not specify).
    5) I also tried the 'German Medicine' (http://discussions.apple.com/message.jspa?messageID=8728797#8728797) (i.e. Connect the 'problematic MacBook' to my old G4 via firewire and reinstall the 2009-001 update). Again no success. The G4 cannot mount the MacBook hardrive.
    I don't know what to do any more.
    A) Can I resuscitate my old system? If yes how?
    B) If not, can I at least save the data I have in my old HD?
    C) Is it possible to format and reinstall the OS or is this this computer doomed?
    Apologies for writing so many questions but I'm really freaking out!
    Thank you.
    B.

    Hi BDAqua,
    I did as you said and got a firewire backup drive (Seagate - FreeAgent Desk 500GB). I tried to make a carbon copy of HD but it seems that the copy had some problems. Below I report both the CCC and console logs:
    1) "Cloning method: Backup everything
    Delete items on target that aren't on the source: No
    18:23:39 Enabling ownership on the target volume...
    18:23:50 The target volume has ownership enabled.
    18:23:50 The target volume has Access Control Lists enabled.
    18:23:50 Authenticating...
    18:23:50 Initiating synchronization engine...
    18:23:51 Cloning...
    18:31:20 rsync: readdir("/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj"): Input/output error (5)
    19:04:41 rsync: readdir("/System/Library/Components/AudioCodecs.component/Contents/Resources/Fr ench.lproj"): Input/output error (5)
    19:05:41 rsync: readdir("/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj"): Input/output error (5)
    19:06:01 rsync: readdir("/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj"): Input/output error (5)
    19:07:05 rsync: readdir("/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBC DCECMData.kext/Contents/Resources/French.lproj"): Input/output error (5)
    19:10:13 rsync: readdir("/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Resou rces/French.lproj"): Input/output error (5)
    19:50:10 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2] (51)
    19:50:11 rsync: Some errors were encountered during the backup., Error code: 51
    19:50:14 Sync Engine warnings: (
    "rsync: readdir(\"/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/Components/AudioCodecs.component/Contents/Resources/F rench.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSB CDCECMData.kext/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Reso urces/French.lproj\"): Input/output error (5)",
    "rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2]"
    2) "Mac OS X Version 10.4.11 (Build 8S2167)
    2009-03-01 10:30:14 +0100
    2009-03-01 10:30:21.962 SystemUIServer[213] lang is:en
    Mar 1 11:20:32 Bs-Home-Mac /usr/sbin/ocspd: starting
    Mar 1 11:38:25 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 12:46:40 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 13:54:55 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 15:03:13 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 16:11:31 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 17:19:46 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Main starting
    2009-03-01 17:47:20.393 Skype[313] SkypeApplication::init called
    2009-03-01 17:47:21.554 Skype[313] SKInitDebugLogging
    2009-03-01 17:47:46.169 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
    2009-03-01 17:47:47.208 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
    Starting the process...
    2009-03-01 17:48:36.186 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:48:36.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:48:37.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:48:37.369 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:59:16.450 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
    Mar 1 17:59:19 Bs-Home-Mac crashdump[355]: Skype crashed
    Mar 1 17:59:20 Bs-Home-Mac crashdump[355]: crash report written to: /Users/bernardolima/Library/Logs/CrashReporter/Skype.crash.log
    Mar 1 18:23:50 Bs-Home-Mac authexec: executing /Applications/Carbon Copy Cloner.app/Contents/Resources/helper_tool
    Mar 1 18:28:01 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Main starting
    2009-03-01 18:41:03.154 Skype[393] SkypeApplication::init called
    2009-03-01 18:41:12.433 Skype[393] SKInitDebugLogging
    Mar 1 19:36:16 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 19:55:54 Bs-Home-Mac mdimportserver[480]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2746
    Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
    Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
    Mar 1 20:44:34 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 21:52:51 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 23:01:07 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor"
    Due to my lack of knowledge I can't judge how bad this is. But I can tell you that every time I read the word bad in the log it scares the s*** out me.

  • Macbook will not boot up after running Software Update

    My MacBook will not boot up after running Software Update (Security update + Java?) earlier today. I have only the gray start up screen + Apple logo + gear wheel constantly rotating. I have tried restarts several times and tried to start up from my original system DVD - this makes no difference.
    I called Apple support, tried resetting the power and PRAM - still no difference. He had no knowledge of other problems reported; although I note recent post may have same issue.
    I cannot get an appointment at my Apple Store before Monday.
    Any suggestions?

    Still no success. When I hold down the option key when powering up I get the hard disk icon plus arrowhead (only). When clicking the arrowhead it goes to the gray screen + apple logo+ rotating gearwheel.
    This happens both with DVD in slot and without DVD. the DVD image is not coming up on screen. When I start up without DVD the hard disk icon appears promptly. When I start with DVD in the DVD is spinning for a short period before the hard disk icon appears. On clicking the arrowhead to hard disk icon the DVD spins again for a while then stops. Apart from the DVD spinning, both situations result in gray screen + apple logo+ rotating gearwheel.

  • I cannot restore aback up from my computer after a softwared update. i kep getting an error message saying the phoneis disconnected even though it it not.

    cannot restore aback up from my computer after a softwared update. i kep getting an error message saying the phoneis disconnected even though it it not.

    If you're not a developer then you really should not have upgraded.
    I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

  • After running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened??

    I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
    I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
    Migration Assistant Update for Mac
    Mac OSX 10.6.8 Supplemental Update
    Safari
    iTunes
    Remote Desktop Client Update
    Now I get a message:
    iTunes cannot be opened because of a problem
    Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
    Process:         iTunes [5092]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         ??? (???)
    Build Info:      iTunes-10315501~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [111]
    Date/Time:       2011-07-26 12:08:18.568 -0500
    OS Version:      Mac OS X 10.6.8 (10K540)
    Report Version:  6
    Interval Since Last Report:          504736 sec
    Crashes Since Last Report:           20
    Per-App Crashes Since Last Report:   13
    Anonymous UUID:                      B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
    Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
    Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: External HDD, 0x1058  (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
    USB Device: Hub, 0x0424  (SMSC), 0x2507, 0x26400000 / 2
    USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
    USB Device: Hub, 0x0424  (SMSC), 0x2502, 0x26470000 / 3
    USB Device: Deskjet D4300 series, 0x03f0  (Hewlett Packard), 0x1f04, 0x26471000 / 5
    USB Device: GD-0608-U, 0x056a  (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000 / 3
    USB Device: Hub in Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x1003, 0x04300000 / 2
    USB Device: Apple Optical USB Mouse, 0x05ac  (Apple Inc.), 0x0307, 0x04310000 / 6
    USB Device: Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x020b, 0x04330000 / 5
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8216, 0x06110000 / 5
    FireWire Device: unknown_device, Unknown
    FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/sec

    Same thing happened to me and I get the same error message. These are the programs that don't work
    mail
    keynote
    pages
    all Office 2011 programs
    safari

  • Error 1603 after trying to update to ios 5 now phone is bricked stuck in recovery mode

    Error 1603 after trying to update to ios 5 now phone is bricked stuck in recovery mode

    Try this - download a program called rec boot. follow the instructions to kick it out of recovery mode. and does itunes recognise
    or hold the power and home button together until you see a "connect to itunes" pic on the screen
    hope it helps

  • TS1367 after a software update, my macbook pro was supposed to restart, since then, it doesn't restart & there is nothing i can do, any help please ?

    Hello,
    after a sofware update, my macbook pro was supposed to restart,
    since then the start up process begins & after few seconds, the mac goes back to off without starting, what's wrong ?
    thanks for any support,
    Amine

    Let me add a little bit of details,
    after the software update, I was asked to restart my laptop,
    while doing it, I got a message error :"some files couldn't be updated".
    Since then, everytime I start my macbook pro, I have the grey apple & screen, with a kind of updating bar (grey as well) at the bottom,
    when the bar reaches approximately 30 to 40%, it disappears & the laptop swiths off.
    Ihave tried to start on a safe mode, it doesn't work either,
    thanks

  • Why does itunes crash upon opening after the software update?

    Why does itunes crash upon opening after the software update? Everything worked fine until I decided to update this morning and as soon as the computer rebooted, the error message appeared.  Is there anything available to fix this?

    I answered the same question in a similar post.  It's all to do with the wireless sync. 
    I used the following method to stop iTunes from constantly restarting -
    Open task manager
    Select the 'Processes' tab.
    Look for 'iTunesHelper.exe'
    Select 'iTunesHelper.exe'  then click on 'end process'
    Hope this helps.

  • Safari Hangs After Installing Software Update

    I did a software update a few days ago, which included a security update (PowerMac G5 2.0GHz running Leopard). After that, I was having trouble connecting to the internet (everything said I was connected except that I couldn't actually connect). That seems to be fixed, but now Safari launches and hangs when trying to load the home page (Apple's start page), requiring me to force quit it.
    I tried changing firewall setting and deleting the plist file, but nothing seems to work. Any ideas would be appreciated.
    Thanks in advance

    Ok, I tried using OnyX, and no change. I am, however, not able to connect at all to the internet. This problem also started right after the software update, but it seemed to only last for a little while. Now, whenever trying to connect to my iDisk, I get an error code -5016, saying I can't connect to the server.
    It was working fine before the software update, and my iBook G4 also had problems after it (but it was only a check in the firewall settings), so I suspect some settings were changed in the security update, but I don't know what.

Maybe you are looking for

  • Can I connect my new touch on my MacOS to the iTunes apple id same as other touch I'm still using and not lose everything, and how?

    Hi, I have a Ipod Touch that I have an apple ID for and have set up on my MAC OS with Itunes and all that jazz. I however fully admit I know very little about properly using Itunes especially when I get new Ipods. Case and Point = I have 6 different

  • Apple TV slideshow with video and images

    I want to make a "slideshow" with alternating video clips (from one movie) and pictures.Can I tell the movie to play for a certain amount of time and then switch to an image and then go back to the movie, repeating until the movie is over and then ha

  • Photoshop runtime error

    Whenever i browse for font to change my text, if the photoshop doesnt recognize the font it prompt me a message Runtime error. Please help me to fix this because if i hit the ok or closed the prompt box, my photoshop automatically end its sessions wh

  • Corrupt Datafiles following "Successful" Clone Process

    Looking for help with the following problem/issue: We attempted to clone our production database to our development environment using RMAN, following a process successfully used on multiple occasions in the past. Both databases are running on UNIX an

  • Creating a break line in cf

    Hello, #chr(13)##chr(10)#  or  chr(13) & chr(10) not creating line break in coldfusion. Can anybody help please ?