.dll errors when applying JanCPU
Hi,
I really need help in finding the issue as to why when applying the JanCPU2012 the prerequisite check "CheckActiveFilesAndExecutables" fail.
Its saying that some .dll executables are still running:
Running prerequisite checks...
Prerequisite check "CheckActiveFilesAndExecutables" failed.
The details are:
Following files are active :
E:\METANEO2\product\11.2.0\dbhome_1\bin\oraclient11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orageneric11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orapls11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oracommon11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oci.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oran11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orantcp11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oranro11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orannzsbb11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orazt11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oraztkg11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orasql11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oranls11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orasnls11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oraxml11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oraasmclnt11.dll
ApplySession failed during prerequisite checks: Prerequisite check "CheckActiveF
ilesAndExecutables" failed.
System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
*1) OUI-67620:Interim patch 13413154 is a superset of the patch(es) [ 13038787 ]*
in the Oracle Home
OPatch failed with error code = 74
Here is what I have done and is still not working:
1) I have stopped all Oracle Services and Distributed Transaction Coordinator
2) I have downloaded Process Explorer and it is not showing me any of the .dll's that are supposedly running
Please let me know...
Thank you!!!
Saber
Hi Saber,
I actually faced this very same problem on windows 2008R2 boxes.
What i checked was to remane the dll's to make sure that they were not in use... and i actually could: so, Oracle reported a problem that did not feel true...
To get this going, i actually renamed all listed dll's, and restarted the installer... and no problem!
HTH,
Thierry
Similar Messages
-
Error when applying a XSLT transformation: No valid XSLT pro
Dear All,
I am getting following error when opening the "General Supplier Data" from Pre-Select Supplier.
Error Message: "Error message: Error when applying a XSLT transformation: No valid XSLT program supplied"
I have already read the related threads on SDN and checked the SAP Note 883896 and others. Even tried running the program UXS_DEL_NAVIGATION_NODE and UXS_ADD_MISSING_XSLT_NAME. But not able to solve the issue.
Kindly Help.
Regards,
SagarHi Masa,
Thanks for reply. I have checked this note. As note suggests, S_DEVELOP auth object is assigned to the user. and it has value *.
Do I need to check anything else?
Regards,
Sagar -
Error when applying a XSLT transformation
central instance
transaction SURVEY
Extras->Target Group Hierarchy-> Import from file
select file
Error when applying a XSLT transformation
dialog instance workingHello Andrey Kuryanov,
Could make sure you describe the problem more clear as much as you can so that community can help you better.
Please provide more details with more detailed steps and actual error messge.
Thanks
Raja Pamireddy
Moderator -
Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
Error when applying patch 3171663(11.5.9 CU2 )..
hi..
error when applying patch 3171663(11.5.9 CU2 )
below error in log file:
Assigned: file mscplan.odf on worker 1 for product msc username MSC.
Time is: Sat May 22 2010 21:58:03
FAILED: file mscplan.odf on worker 1 for product msc username MSC.
Time is: Sat May 22 2010 21:58:04
ATTENTION: All workers either have failed or are waiting:
FAILED: file mscplan.odf on worker 1.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
below error in workerlog.. in adworker1
===============================================================================
The table is missing the index MSC_TRADING_PARTNERS_U2
or index MSC_TRADING_PARTNERS_U2 exists on another table.
Create it with the statement:
Start time for statement below is: Sat May 22 2010 21:58:04
CREATE UNIQUE INDEX MSC.MSC_TRADING_PARTNERS_U2 ON MSC.MSC_TRADING_PARTNERS
(SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID) LOGGING STORAGE
(INITIAL 4K NEXT 40K MINEXTENTS 1 MAXEXTENTS UNLIMITED PCTINCREASE 0
FREELIST GROUPS 4 FREELISTS 4 ) PCTFREE 10 INITRANS 11 MAXTRANS 255
COMPUTE STATISTICS TABLESPACE MSCX
Statement executed.
AD Worker error:
The index cannot be created as the table has duplicate keys.
Use the following SQL statement to identify the duplicate keys:
SELECT SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID, count(*)
FROM MSC.MSC_TRADING_PARTNERS
GROUP BY SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID
HAVING count(*)>1
AD Worker error:
Unable to compare or correct tables or indexes or keys
because of the error above
Time when worker failed: Sat May 22 2010 21:58:04
====================================================================
My application version :11.5.9
my database version 8.1.7.4
Regards
Jaffer Ali>
Use the following SQL statement to identify the duplicate keys:
SELECT SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID, count(*)
FROM MSC.MSC_TRADING_PARTNERS
GROUP BY SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID
HAVING count(*)>1
>
Pl post the output of the above statement
HTH
Srini -
Recently upgraded from Oracle 10.2.0.1 to 10.2.0.5 & since then i cant run OEM, so oracle suggested Apply Patch 8350262 to your Oracle Home installation using OPatch.
OS : Windows 2003 32 bit
DB : Oracle 10.2.0.5
I get below error when apply opatch.
C:\oracle\product\10.2.0\db_1\OPatch>opatch apply 8350262
Invoking OPatch 10.2.0.4.9
Oracle Interim Patch Installer version 10.2.0.4.9
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : C:\oracle\product\10.2.0\db_1
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 10.2.0.4.9
OUI version : 10.2.0.5.0
OUI location : C:\oracle\product\10.2.0\db_1\oui
Log file location : C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2013-
01-02_23-02-41PM.log
Patch history file: C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch_hist
ory.txt
ApplySession applying interim patch '8350262' to OH 'C:\oracle\product\10.2.0\db
_1'
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 8350262: Required component(s) missing : [ oracle.sysman.agent.core, 10.2.
0.4.0a, higher version 10.2.0.5.0a found. ]
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplica
ble" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 74
C:\oracle\product\10.2.0\db_1\OPatch>
Any help would be appreciated.
Thanks,
VikharDo you mean this "The patch is also included in 10.2.0.5 database patch 5 and 10.2.0.5.3 (PSU3)" which is quoted in (DOC ID 1222603.1), if so, i have downloaded. However, can you give me patch # for 10.2.0.5 version in order to double check , may be by mistake i download wrong version.
Thank you, -
How do you fix a msvcr80.dll error when trying to install itunes 11.1.4
How do you fix a msvcr80.dll error when trying to install itunes 11.1.4?
This also work100%
Removing and reinstalling iTunes and other software components
If applicable, disconnect any iPod or iOS device and close Microsoft Outlook.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later).
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (see note 1 below)
iCloud (if present)
MobileMe (if present) (see note 2 below)
Bonjour
Apple Application Support
Reboot your computer. Delete any of the following folders where they can be found: (see note 3 below)
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iPod
C:\Program Files\iTunes
also on 64-bit systems:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple
C:\Program Files (x86)\iPod
C:\Program Files (x86)\iTunes
Download the iTunes setup file and run it to install. Use an account with administrative rights. This can usually be achieved by right-clicking on the downloaded file and selecting Run as... or Run as Administrator. In some cases a combination of Shift or Ctrl keys may be required for the option to show, or it may not be necessary.
If you deleted iCloud and reinstalling iTunes doesn't automatically reinstall it visit iCloud Control Panel. -
HELP: Keep Getting Error When Applying Magic Bullet Looks
get this error when applying Looks.
"After Effects error: crash occurred while invoking effect plug-in "Looks".
and then it says
"After Effects error: Crash in progress. Last logged message was: <2280>
<MCExportInfo: Destruct> <5> Destruct for 420462944"
I try to apply Looks to another video and I get a different error saying language registry key. I apply Looks to a third video and I get the dynamiclink error. It's like different error for different video. All 3 videos shot with different cameras.Same problem here ! I have Vista 64 bit and Intel 4500 Mhd
driver. The issue is Magic Bullet Misfire works fine in Adobe After
Effects CS5 but it crashes with Magic Bullet Looks.
Have checked OpenGL in AE CS5 which are by default OFF, that is if you open Adobe After Effects CS5 and into edit and then click 'preferences'. Under previews there is ur OpenGL info. Click OpenGL, its says need to update driver or get a better OpenGL above 2.0. I think updating to new OpenGL may fix the issue. I have made a video with Magic Bullet Misfire and it works fine but the issue is with only 'Magic Bullet Looks' presets where the AE crashes.
So it cant be Windows 7, Vista or 32 bit or 64 bit issue. Probably a driver error or an internal Magic Bullet 1.4 or Adobe After Effects CS5 64 bit error. -
I keep getting an msvcr80.dll error when trying to download newest version of iTunes.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99595) -
Imaq.dll error when boot up Windows
Hello,
I have a little Problem with Labview 8.6. After i installed the driverpack for the dvd, my Windows give my the error
Der Prozedureinsprungpunkt "ProgramFPGAs" wurde in DLL "IMAQ.dll" nicht gefunden.
my tranzlation
the entry point "ProgramFPGAs" is not found in the Dll " Imaq.dll
Labview start an run without problems, only this message at windows boot up is annoying.
was anyone a idea to fix the problem or atleast stop that messagebox
Thank you
Solved!
Go to Solution.Hi DRhatje.
Good Morning and I hope your well today. Thanks for your post.
I think thats a pretty good translation, the error message I was thinking of can be found in the knowledgebase article below.
The suggested cause of the error is that the IMAQ.exe is set (by default) to start on startup. But if you don't have a framer grabber installed on the machine then you could well see this error. The solution is to remove the exe from the startup list on your system. The steps to do this is listed in the link below but in summary,
From the section in the screenshot you sent me you should be able to
select the "Selective Startup", then navigate to the "Startup" tab and
uncheck the IMAQBoot.exe.
If this reverts back to the default
settings on restart, this is probably an indicator that your Admin
Rights on this PC are limited.
I think that a quick way to check
this is to go to Start>Run and type "regedit". This is essentially a
more advanced way to manipulate similar settings, but if you don't have
Admin Rights on the PC then you would most probably be denied access.
In any case though, please ask one of your IT colleagues to use their
passwords and change this setting. It will get rid of the warning you
are seeing until you start using our Vision Hardware and need to
reactivate it.
Make sure you click on "Apply" before you exit this utility.
Why do I get "IMAQBoot.exe - Entry Point Not Found" error when I restart computer?
http://digital.ni.com/public.nsf/allkb/AD70B1036D5B950B8625752400578CFE?OpenDocument
This should at least remove the error message upon start up.
Please let me know how you get on and I hope this helps!
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help! -
NI 5660 Driver DLL Errors when using Teststand 2010 and LabVIEW Run-Time Engine 2010
This problem seems similar to the post "Resource not found error in executable on development machine." but I didn't want to repost under that thread because I only happened upon it by chance and none of my searches brought me there... so I made a more descriptive Subject.
I am working on a system that uses a PXI Chassis with a NI 5600 Downconverter and a NI 5620 high speed digitizer, among other PXI Cards.
I inherited working code written in LabVIEW 2010, running with the LabVIEW Run-Time Engine 2010. The code was using a custom executive and my task was to rewrite the test using TestStand 2010. I reused the majority of the old code. The old code used NI-5660 to control the 5600 and 5620. When I run my sequence using the LV Development System and TestStand, it runs without any issues. When I change the adapter over to LabVIEW Run-Time Engine 2010, all of my NI5660 VIs become broken due to DLL issues. It warns that the nipxi5600u.dll was not initialized correctly. Many of the errors are associated with the NI Tuner and NI Scope. After this LabVIEW will crash randomly, and the seqeunce will not work in TestStand even when back with the LV Development Adapter. The only way to recover after this is to restart the computer - TestStand automatically reverts back to the development system, the VIs are no longer broken and the sequence works again.
I have all of my VIs associated with a project. After reading a little bit about DLLs and TestStand, I found all of the DLLs in the dependencies section of my project and added them to my TestStand workspace. I also used Dependency Walker to track down the problems with the nipxi5600u.dll, the 2 DLL files that it said were not found already existed in the same folder as the original DLL (C:\Windows\System32). I have also performed a Mass Compile to make sure everything was running in LV 2010. If I skip the steps involving the 5660, my entire sequence runs fine.
The previous code was running with the LabVIEW Run-Time Engine without any issues. Is there just a step I am missing? Has anyone seen anything like this before? I can send screenshots of errors to provide more detail if necessary.I have tried some more things and still can't get it to work. I have added the VIs mentioned in the Notes On Creating Modulation Executables KB both to the TestStand workspace and the LabVIEW project holding all of my VIs. This did not change the results.
When I try to run my sequence, The first error I get is shown in Error 1445.bmp. This happens when I try to use the NI 5660 initialize.vi. If I click ignore, the next error I see is shown in Error -20551.bmp. When I try to open the VI to look at it, I get the 2 DLL errors shown in Error loading nipxi5600u.bmp and Error loading nidaq32.bmp. When I close TestStand, I get the error LabVIEW Fatal Error.bmp.
Attachments:
Error1445.JPG 164 KB
Error -20551.JPG 174 KB
Error loading nipxi5600u.JPG 9 KB -
NPSWF32.dll error when installing flash player
I've been trying to install flash player but I keep getting the same error when I try:
Error opening file for writing C:\windows\system32\macromed\flash\NPSWF32.dll
When I ignore that one I get another error
Error opening file for writing C:\windows\system32\macromed\flash\NPSWF32_FlashUtil.exe
and then when I ignore this it 'finishes downloading', but it's basically useless and does not work. I went to the location above to see if I could find the file- NPSWF32.dll, but it's not there. There is a macromed and Flash folder but it is empty inside. I downloaded the NPSWF32.dll and tried to put it in the flash folder but the system wouldn't let me. I've tried uninstalling and reinstalling, but I keep getting the same error. it is driving me insane, please help me if you are familiar with this problem. i googled this and saw that a lot of people had this problem as well but i've yet to find a working solution. I'm on windows vista and im using 3.6 firefox.Hi , The files you are speaking of are removed with the Adobe Uninstaller and then the Installer will install the needed
files into the Flash folder.
http://kb2.adobe.com/cps/141/tn_14157.html Download this Uninstaller and put it on your Desktop
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player.exe This is the FF Installer, SAVE it to your Desktop
Since I don't know what add ons, extensions or plugins you have, Just disable them all for now.
Follow the instructions for the Uninstaller, close all browsers, check the system tray. No programs that use Flash should
be running.
Disconnect from the Internet
Disable any and all Anti-Virus/Spyware programs that run in realtime.
Disable any Firewall that you use, except Windows Firewall
Run the Uninstaller from your Desktop, then Reboot. Wait until fully Rebooted, then Reboot again
Run the Installer from your Desktop, then Reboot
Enable your Firewall and your Anti-Virus/Spyware programs
Connect back to the Internet
Go to this Adobe test site to confirm you have the FP vs 10.0.42.34 installed http://www.adobe.com/products/flash/about
Go to your plugins and make sure you have SWF(Shockwave Flash) vs 10.0.42.34 there and it is Enabled
Enable Java-the latest is JRE 6 update 18.
Then check your Flash folder and post back with the files that are now installed.
Now if you have old versions of Java installed(check the Add/Remove) you would need to Remove them via Add/Remove
and install the latest Java. NOTE: You can do this prior to the Uninstall/Install process. Post back and I'll give you the Java install procedure.
Thanks
eidnolb
Message was edited by: eidnolb add'l -
EDs.dll error when use Updateusers or provisionusers commands
I am installing V9.2.1 and receive this error when I try to use updateusers or provisionusers. I have installed and configured shared services, aas, eas, planning and using weblogic 8.1.4. Any ideas? It says it cannot find library eds.dll. Is this because Planning did not install properly?
Warning: unable to read transaction.interoperability config property
Setting HBR Mode to: 2
Cache Manager initialized...
HBR Logging Config File : HBRServer.properties
HBR Logging Config File : HBRClient.properties
Cache Loaded: HBRLocation
2008-06-17 11:17:48,158 WARN main com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
Embedded HBR initialized.
Analytic High Availability Services - Release 9.2.0.3.0 Build 047
Copyright (c) 1991-2007 Hyperion Solutions Corporation. All rights reserved.
Setting up property service...
Setting up logging service...
Log file name: ./ahas.log
ESS_ES_HOME is not set. Using the default environment...
com.essbase.api.base.EssException: Cannot load library [eds.dll]
at com.essbase.server.framework.EssOrbPluginDirect.initialize(Unknown Source)
at com.essbase.server.framework.EssServerFramework.initialize2(Unknown Source)
at com.essbase.server.framework.EssServerFramework.<init>(Unknown Source)
at com.essbase.server.plugins.tcpip.EssbaseEnterprise.<clinit>(Unknown Source)
at com.essbase.server.EssbaseEnterprise.main(Unknown Source)
at com.hyperion.hbr.core.PluginDataManager$1.run(Unknown Source)
Error: Cannot load library [eds.dll]Thank's Tim for you answer ..
I fraid you recomendation don't help me.
Tim - Can you now - what's do ProvisionUsers.cmd utility ? - create security filters in Essbase ?
That's all error in UserProvisionSync.log file
[Mon Aug 11 09:20:07 MSD 2008] Starting synchronization.
java.io.FileNotFoundException: C:\Hyperion\HyperionPlanning\config\security.properties (Системе не удается найти указанный путь)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at com.sun.enterprise.util.Utility.getPropertiesFromFile(Utility.java:74)
at com.sun.enterprise.iiop.POAEJBORB.<clinit>(POAEJBORB.java:83)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at org.omg.CORBA.ORB.create_impl(ORB.java:295)
at org.omg.CORBA.ORB.init(ORB.java:336)
at com.sun.enterprise.util.ORBManager.createORB(ORBManager.java:144)
at com.sun.enterprise.util.ORBManager.init(ORBManager.java:69)
at com.sun.enterprise.naming.SerialInitContextFactory.<init>(SerialInitContextFactory.java:35)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:649)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
at javax.naming.InitialContext.init(InitialContext.java:219)
at javax.naming.InitialContext.<init>(InitialContext.java:195)
at javax.naming.directory.InitialDirContext.<init>(InitialDirContext.java:80)
at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:85)
at com.hyperion.css.spi.util.jndi.CSSDirContext.<init>(Unknown Source)
at com.hyperion.css.spi.util.jndi.CSSLdapMsadContext.<init>(Unknown Source)
at com.hyperion.css.spi.util.jndi.CSSNativeContext.<init>(Unknown Source)
at com.hyperion.css.spi.impl.nv.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.nv.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProviderBase.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.planning.security.HspCSS.<init>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.createSecurityAPI(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getSecurityAPI(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.createHspJS(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getHspJSByApp(Unknown Source)
at com.hyperion.planning.utils.HspUserProvisioningUtility.main(Unknown Source)
java.io.FileNotFoundException: C:\Hyperion\HyperionPlanning\config\ejb.properties (Системе не удается найти указанный путь)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at com.sun.enterprise.util.Utility.getPropertiesFromFile(Utility.java:74)
at com.sun.enterprise.iiop.J2EEInitializer.<init>(J2EEInitializer.java:57)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at com.sun.corba.ee.internal.Interceptors.PIORB.registerORBInitializers(PIORB.java:380)
at com.sun.corba.ee.internal.Interceptors.PIORB.parseProperties(PIORB.java:338)
at com.sun.corba.ee.internal.TxPOA.TxPIORB.parseProperties(TxPIORB.java:116)
at com.sun.corba.ee.internal.corba.ORB.set_parameters(ORB.java:453)
at com.sun.corba.ee.internal.POA.POAORB.set_parameters(POAORB.java:151)
at com.sun.corba.ee.internal.Interceptors.PIORB.set_parameters(PIORB.java:327)
at org.omg.CORBA.ORB.init(ORB.java:337)
at com.sun.enterprise.util.ORBManager.createORB(ORBManager.java:144)
at com.sun.enterprise.util.ORBManager.init(ORBManager.java:69)
at com.sun.enterprise.naming.SerialInitContextFactory.<init>(SerialInitContextFactory.java:35)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:649)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
at javax.naming.InitialContext.init(InitialContext.java:219)
at javax.naming.InitialContext.<init>(InitialContext.java:195)
at javax.naming.directory.InitialDirContext.<init>(InitialDirContext.java:80)
at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:85)
at com.hyperion.css.spi.util.jndi.CSSDirContext.<init>(Unknown Source)
at com.hyperion.css.spi.util.jndi.CSSLdapMsadContext.<init>(Unknown Source)
at com.hyperion.css.spi.util.jndi.CSSNativeContext.<init>(Unknown Source)
at com.hyperion.css.spi.impl.nv.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.nv.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProviderBase.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.planning.security.HspCSS.<init>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.createSecurityAPI(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getSecurityAPI(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.createHspJS(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getHspJSByApp(Unknown Source)
at com.hyperion.planning.utils.HspUserProvisioningUtility.main(Unknown Source)
Warning: unable to read transaction.interoperability config property
Setting HBR Mode to: 2
Cache Manager initialized...
HBR Logging Config File : HBRServer.properties
HBR Logging Config File : HBRClient.properties
Cache Loaded: HBRLocation
2008-08-11 09:20:17,600 WARN main com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
Embedded HBR initialized.
Essbase(r) Deployment Services - Release 9.2.0.3.0 Build 047
Copyright (c) 1991-2007 Hyperion Solutions Corporation. All rights reserved.
Setting up property service...
Setting up logging service...
Log file name: ./ahas.log
ESS_ES_HOME is not set. Using the default environment...
com.essbase.api.base.EssException: Cannot load library {0}
at com.essbase.server.framework.EssOrbPluginDirect.initialize(Unknown Source)
at com.essbase.server.framework.EssServerFramework.initialize2(Unknown Source)
at com.essbase.server.framework.EssServerFramework.<init>(Unknown Source)
at com.essbase.server.plugins.tcpip.EssbaseEnterprise.<clinit>(Unknown Source)
at com.essbase.server.EssbaseEnterprise.main(Unknown Source)
at com.hyperion.hbr.core.PluginDataManager$1.run(Unknown Source)
Error: Cannot load library {0}
------------- -
LabVIEW PDA reports COREDLL.DLL error when using Call Library Function Node
I'm trying to build a LV PDA app that calls an external DLL file built using embedded visual C. When configuring the Call Library Function node I select the stub DLL, configure the I/O parameters and select OK. When the configuration dialog closes I get the following error:
LabVIEW: LabVIEW.exe - Unable to Locate Component
This application has failed to start because COREDLL.DLL was not found. Re-installing the application may fix this problem.
I do not get this error when using the configuration dialog in the example VIs.
Any suggestions as to the cause and/or the solution?
Thanks,
RyanHello -
When you create a PDA VI that calls a DLL, you must include the .c or .lib file that corresponds to the DLL. Take a look at these documents:
LabVIEW PDA Module Build Errors with VIs that Call DLLs
Why Do I Receive Errors When Calling a C++ DLL from a Call Library Node Using the LabVIEW PDA Module...
How To Call External Code in LabVIEW PDA for Palm OS
H
ow To Call External Code in LabVIEW PDA for Pocket PC
Hope this helps!
S Vences
Applications Engineer
National Instruments -
Error when applying PI_BASIS patch SAPKIPYM03 on ECC 6
Dear Gurus,
I have ECC 6 running on Oracle 10.2.0.4 and my OS is SUSE LINUX ENT 1. My Kernel patch level also the latest one 236.
I am getting the following transport errors when i applying PI_BASIS patch SAPKIPYM03 via SPAM. Appreciate if someone can help me to resolve this issue.
S_LOG (i grep only the ERRORS in the log):-
/usr/sap/trans/log/SAPPIPYM03.NAG:4 ETW000 TRACE-INFO: 39: [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12537
/usr/sap/trans/log/SAPPIPYM03.NAG:4 ETW000 TRACE-INFO: 41: [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12537' 19 0.182340
/usr/sap/trans/log/SAPPIPYM03.NAG:4 ETW000 TRACE-INFO: 57: [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12537
/usr/sap/trans/log/SAPPIPYM03.NAG:4 ETW000 TRACE-INFO: 59: [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12537' 36 0.253573
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci. ,00000] *** ERROR => Error 1089 in stmt_execute() from oci_execute_stmt(), orpc=0
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci. ,00000] *** ERROR => ORA-1089 occurred when executing SQL stmt (parse error offset=0)
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCITransRollback' failed with rc=3114
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 TRACE-INFO: 41: [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12537
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 TRACE-INFO: 43: [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12537' 80 3.439127
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 TRACE-INFO: 59: [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12537
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 TRACE-INFO: 61: [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12537' 34 3.543518
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci. ,00000] *** ERROR => Error 1089 in stmt_fetch() from oci_execute_stmt(), orpc=0
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci. ,00000] *** ERROR => ORA-1089 occurred when executing SQL stmt (parse error offset=0)
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci. ,00000] *** ERROR => Error 3114 in stmt_fetch() from oci_execute_stmt(), orpc=1
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci. ,00000] *** ERROR => ORA-3114 occurred when executing SQL stmt (parse error offset=0)
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCITransRollback' failed with rc=3114
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci. ,00000] *** ERROR => Error 1089 in stmt_execute() from oci_execute_stmt(), orpc=0
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci. ,00000] *** ERROR => ORA-1089 occurred when executing SQL stmt (parse error offset=0)
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCITransRollback' failed with rc=3114
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci. ,00000] *** ERROR => Error 1089 in stmt_fetch() from oci_execute_stmt(), orpc=0
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci. ,00000] *** ERROR => ORA-1089 occurred when executing SQL stmt (parse error offset=0)
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci. ,00000] *** ERROR => Error 3114 in stmt_execute() from oci_execute_stmt(), orpc=1
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci. ,00000] *** ERROR => ORA-3114 occurred when executing SQL stmt (parse error offset=7)
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCITransRollback' failed with rc=3114
Thanks & Regards,
Kalyan.> *** ERROR => CONNECT failed with sql error '12537'
Could you make sure that DB and listener run well? Please also log in OS as SIDADM and run r3trans -d
Regards,
Maybe you are looking for
-
Ipod w/folder icon can be regognized by iTunes but...
I've had my 3G iPod for almost 3 years and it stopped working about a year ago when my computer froze. From then on I get the folder icon with an exclamation point every time I boot it up. I tried to see if iTunes 7 was able to fix it since past upda
-
Hi, For some reason, JSC debugger isn't working, it doesn't stop at break point at all before executing that line. I tried setting breakpoints in various functions, unfortunately debugger doesn't stop at ANY of the break points. So, I tried creating
-
I need to reinstall microsoft office but no longer have the key. Is there a way around this?
-
Cannot select other pages as Portals.
The Provider Oracle Portal Pages is not available in the Portlet Repository, but does exist as I can select it for editing: it invokes package: WWPOB_PORTAL_PROVIDER which I presume is correct, though it doesn't appear after I refresh the Repository.
-
JCA Connection failed (JDE Adapter)
Hi I'm trying to connect witn JDE 12 by JDE Adapter. I copied Connector.jar, Kernel.jar, log4j.jar and orcl_OneWorld_Adapter_896.jar into $Oracle_HOME\adapters\application\lib\ I configured JCA Connection I get this below error.. 09.07.2007 19:14:44.