.dlls not working in built .exe using Windows 7

We build a basic .exe program and it runs great. We build our program with a couple .dlls that works fine running in labview and it takes 1 minute to open the .exe and then the .dll functions don't instantiate. We think this may be an issue with using Windows 7. We are running as administrator. Thank your for your help. We didn't see this topic in other searches but I hope it has been an issue before and will be an easy fix.
Ryan

The program we are trying to run on Windows 7 was an updated version of one that we currently run on XP with the same dlls. One dll is an inhouse creation for database interaction and the other is for a flow meter from an outside party. Both currently are run on XP machines from and older version of the program. And they both work when run inside of labview on Windows 7. We only get an issue when we create a exe and try to run it.

Similar Messages

NI-Profibus Comsoft Driver not working in built exe

I've been using Profibus in ETS for a long time. I just starting having a problems when I upgraded to 2011 SP1 f1. The problem only occurs in built exe's. I made a simple project (see attached) with the Comsoft example VI (DFP2_DP-SlaveExample.vi). Everything works fine in development mode by clicking the run arrow. If I build the VI into and exe and deploy, it reports the following error in right after DFP2_Initialisation.vi:
Error 1055 occurred at Property Node in DFP2_DP-SlaveExample.vi
Possible reasons:
LabVIEW: The object reference is invalid
Here my setup:
Windows 7 Ultimate SP1 32-bit
Labview (32-bit) 11.0.1f1 (2011 SP1 f1) (patch from here)
Labview Real-Time ETS (11.0.1)
DF_PROFI_II_LV_1.36.2
NI Part# 780160-01 (Profi-2-PCI)
This seem to be a new problem since I patched Labview 2011 SP1 with f1. Is it possible the patch is not compatible with Labview Real-Time and the Comsoft VISA driver? Can I roll back the f1 patch? If so, how?
Attachments:
ProfibusSlaveETS.zip ‏39 KB

Hello David,
I was able to reproduce this issue in LabVIEW 2011 SP1 (without the f1 patch) using a very simple program that does nothing besides produce a heartbeat and access a property node of a front panel indicator. As you said, it does not occur in LabVIEW 2010 SP1, and it does not occur unless the front panel is closed. The error didn't even happen when I was using remote debugging on the executable.
I will be looking into this further, and I'll keep you posted. For now it sounds like you were able to just modify the code to not use those property nodes.
Colden

Front Panel Buttons Does Not Work With scanjet 7650 using Windows 8.1

I am unable to use scan doctor and my front buttons since I moved to Windows 8.1 using the above scanner.

Hi m_heistand.
Please verify that the MF8580 is registered in the MF Network Scan Utility by following the instructions below:
Open the system tray in the bottom-right corner of the desktop and click the blue scanner icon.
Next, select the check box for the MF8500 series, and then click [OK].
Place the machine in [Remote Scanner] mode and scan a document using the MF Toolbox.
If you are still unable to scan after the machine is registered in the scan utility, we recommend that you contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me. thanks ravi

i m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me.
thanks
ravi
<Email removed by Host>

sounds more like Bluetooth rather than moue, but w/o knowing w/o posting mac model type/year we... will... not... know... what you have
All computers are personal computers, a PC though is also "non-Apple" in common usage.
Mac also is platform and OS.
Very confused reading what you are trying to tell us.

Keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling :(

keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipod

I just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.

Product key will not work with this edition of Windows 7

I received a product key for Windows 7 Professional N whilst I was at University via Dreamspark. I'm building a new computer and when it's come to inputting the product key, it comes up saying Product key will not work with this edition of Windows 7.
The version I installed was Windows 7 Professional using an iso and a USB. I rang the phone activation number and when I got through to a representative, I gave him the product key and he said it is valid and should be working. He transferred me to technical
services but instead I got cut off.
At this point I'm really not sure what the issue is, the key was for Windows 7 Professional N, I installed Windows 7 Professional and customer support confirmed it as a valid key. Am I missing something?

Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag

My Photoshop CC and also my CS6 has suddenly stopped working. I'm using Windows 7 - 64 bit.

My Photoshop CC and also my CS6 has suddenly stopped working. I'm using Windows 7 - 64 bit. I need help, does anyone know what to do?

We can't know. You have not told us what exactly the problem is. If there are any warnings, you need to provide them along with other info like the crash logs. If not you have to explain the situation in more detail. Just saying that it doesn't work anymore is not particularly useful.
Mylenium

I'm having trouble signing into the iCloud Control Panel. None of the iCloud suggested fixes work. I'm using Windows 7 on a PC. Is there a simple fix out there?

I'm probably doing this all wrong. Just in case here it is again.
I'm having trouble signing into the iCloud Control Panel. None of the iCloud suggested fixes work. I'm using Windows 7 on a PC. Is there a simple fix out there?

asdfjava-er wrote:
The book that I'm using said it wasn't necessary for this because it's supposed to just make sure everything is working properly--which it's not.OK, if you want to ignore my advice, so be it, but please don't complain that it is not going to work without even trying it yourself.
asdfjava-er wrote:
Now this is the part I don't get. The book tells me to go to http://localhost:8080/ch1/Serv1 even though there are no files/folders that have the name Serv1.
Do you understand what the <servlet-mapping> declaration in the web.xml means? It is roughly just saying the appserver that it should port all requests on /Serv1 to the mentioned servlet.
a couple others like/ch1/WEB-INF/classes/Ch1Servlet.class and /ch1/WEB-INF/web.xml. The WEB-INF folder is not public accessible, so forget about that part.
"Resource not found" simply means that either the URL is wrong (case counts!) or that the resource is actually not there. I.e. not compiled, not deployed, not loaded, etcetera. Reading the appserver's startup logs might also help.

Itunes does not recognize my iPod Touch using Windows 7 - 64bit

Itunes does not recognize my iPod Touch using Windows 7 - 64bit. Is this a driver issue? Has anyone else had this problem? Is there a fix?
Message was edited by: Mark DiGiacomo

hi sally,
see if this user tip by Yorkwill helps:
+In the end what works is to just force the drivers on what windows thinks is a camera, i.e. to ‘update’ the device to use the correct driver. There are some hints on how to do this already listed on this forum, but I’ll try to give some more detailed information:+
+1. First off you need to have iTunes installed and the ipod touch plugged in+
+and recognized as ‘something’ e.g. digital camera (it shouldn’t really+
+matter what it’s recognized as, but it needs to be found by windows).+
+2. Search for usbaapl in the C:\WINDOWS system folder:+
+o open windows explorer (e.g. Right-click Start and then click ‘explore’)+
+o right-click the WINDOWS folder and select ‘Search’).+
+o type in usbaapl and hit Search – try to ignore the dog!+
+You should find the driver info in a sub folder of+
+C:\WINDOWS\system32\DRVSTORE e.g. C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B+
+Remember that location (either leave the search box open or copy the folder+
+name into note pad – you’ll need it later)+
+If you don’t find usbaapl.sys, usbaapl.inf etc. then your drivers have not+
+been installed with the iTunes install and you’ll have to reinstall iTunes.+
+3. Locate the ipod-camera device:+
+o Open the device manager, e.g. using Start > Control Panel >+
+Performance and Maintenance > System > Hardware Tab > Device Manager+
+o Look for a device called ‘ipod’ - if your ipod shows up as+
+‘digital camera’ it will be under something like ‘imaging devices’.+
+4. Update the driver:+
+o Right click the ‘ipod-camera’ in device manager and click on+
+‘Update Driver’ – the Hardware Update Wizard will open.+
+o Check the ‘Install from a list or specific location’ then click ‘Next’+
+o Check ‘Search for the best driver in these locations’. Un-check+
+‘Search removable media’ and check ‘Include this location in the search’.+
+In the text box below type (or better copy and paste) the folder+
+containing the ipod driver information found in step 1 (in the example+
+above it was C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B), +
+then click Next.+
+You should now see something like ‘Apple ipod device driver’ or so. Continue+
+installing that device. Once the driver has been installed the ipod will come+
+to life and iTunes (if you have it open) will show it.+

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

>SystemPreferences>Network>DNS

In PHotoshop CC, my blenidng options are not working at all. A window comes up with the message "

In PHotoshop CC, my blenidng options are not working at all. A window comes up with the message "Could not complete your reequest because of a program error. "
Linda

In Photoshop CC whenever I try to apply blending options to a layer, an error message comes up.. In my error message log, this is what comes up
2013:07:12 16:17:16 : tracked key 0000000000000238 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:12 16:17:16 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:07:18 19:20:19 : tracked key 0000000000000100 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:18 19:20:19 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:09:05 22:42:22 : ..\..\sources\USheetRendererCommands.cpp : 556 : REQUIRE failed 2013:09:16 17:22:13 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:16 17:22:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:37 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:25:58 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:28:01 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:34:51 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:19 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:30 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:55 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:43:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:25 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:42 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:14:16 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:25 22:04:18 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 16:58:46 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:46:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:32 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:05 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:12 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:57:02 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:03 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:40 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:49 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:17 :
..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:53 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed

My firefox updated this morning. Since the update I can no longer post to facebook. Any thoughts? Other browsers work. I am using Windows 7 and Firefox 10.0.1

My firefox updated this morning. Since the update I can no longer post to facebook. Any thoughts? Other browsers work. I am using Windows 7 and Firefox 10.0.1. All was working fine yesterday.

BTW, I can read everything just fine, but when enter information to post and press the post button, nothing happens. I have another computer running Win XP and firefox 8.x and all is fine.

My gps is not working. I cannot use turn-by-turn navigation in google maps. I downloaded a GPS test app and it showed my phone is not locking on any satellites. How can I correct this?

My gps is not working. I cannot use turn-by-turn navigation in google maps. I downloaded a GPS test app and it showed my phone is not locking on any satellites. How can I correct this?

We certainly want to make sure you get the most out of the GPS, wplaxico! Was this tested primarily outdoors? When did this begin? Any other recent apps of updates installed when this started?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

HT3964 Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

read this and see if it helps: http://support.apple.com/kb/ht2090

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

.dlls not working in built .exe using Windows 7

Similar Messages

Maybe you are looking for