DLP to prevent emails from a speciifc domain from being forwarded.

Hello,
Can Exchange 2013 DLP be used to prevent an email from a specific domain from being forwarded?
Shawn

Looking through the options for DLP and transport rules I don't see a way to perform that function.
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

Similar Messages

Is there a way to send an email and prevent it from being forwarded

Is there a way to send an email and prevent it from being forwarded

Not with the most common email systems - webmail, POP, SMTP or IMAP.
The only email system I know of that can prevent forwarding (or copying or printing) is Lotus Notes (now called IBM Notes). I believe it can technically be done within an MS Exchange environment, but I have never actually seen it implemented in one.

Can I stop email from being sent?

I have a number of email accounts configured in outlook 2010.
I want to prevent email from being sent via one of the accounts.
CAN I do this?
If so How?
I have tried to change the SMTP address to be invalid.
It does not send, and does not give me an error.
When I close outlook it tells me emails have not been sent. I have no idea where these emails r.
When I restart it, it resets the smtp address and sends the email.
ruggb

thx for the reply
The problem I am trying to work around is ppl using outlook try to send/reply/fwd emails using those old addresses. Outlook must be configured to rcv mail from clients using those addresses. So if the old email address is set as FROM I want to stop it from
being sent.
if i set the smtp address to an invalid the test never completes and I can never get to the end of that wizard.
If I go back and look at it it is still the invalid address after I cancel the wizard.
If i try to send mail it appears to do it after a long pause and i can't find the email anyplace -but it is not sent.
If i shut down and restart outlook it is back to the valid address and the mail gets sent.
I have it set only rcv, not send, that address in the group but that doesn't work.
ruggb

How do I prevent my emails from being sent without my hitting the send key. Many of my emails are just "taking off" and sending while I am in the middle of typing. If this is a keyboard shortcut, I must disable it, so how do I do that

How can I stop emails from being sent without my hitting the "send" key.

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39]

Protecting your email from being copied

Does anyone know if there is a function for mac that can protect your emails frome being copied by another person.

+Outlook does not include these capabilities which is impossible.+
Don't be silly. Information rights management has been an integral part of MS' Office suite since the 2003 version. I might add that there are other programs that do the same thing, for other kinds of documents, for example Adobe Acrobat for pdf files. Unbelievably enough, even various well-known pieces of Apple software do the same thing for certain kinds of media files. You simply do not know what you are talking about.
This is straight from Outlook's Help:
"By using Permission on the toolbar, you can restrict permission on an e-mail message for specific recipients you want to read the message. As the message sender, you can remove restricted permission from a saved draft of a message by clicking Permission on the toolbar again. Recipients can open and read an e-mail message with restricted permission just as they would a message that doesn't have restricted permission. If recipients don't have Outlook 2003 or later installed on their computers, they can download the Rights Management Add-on for Internet Explorer or another program that supports content with restricted permission.
E-mail administrators can create permission policies to include on the Outlook Permission submenu (or Permission on the File menu). These permission policies define who can read messages and what actions recipients can take with those messages. For example, an e-mail administrator might define a policy called "Company Confidential" that specifies that a message using that policy can be opened only by people inside the company domain. When you compose a message, you can choose from up to 20 customized policies on the Permission submenu (depending on how many policies the e-mail administrator provides)."
+Regarding security, there is a night and day difference between Windows and OS X.+
More nonsense. See my above remark.

Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.

Hello Guys,
I am creating resultsource from central admin. If I create it from central admin it works fine. But if I am creating result source from power shell scripts it shows me following error message.
An exception of type 'Microsoft.Office.Server.Search.Query.InternalQueryErrorException' occurred in Microsoft.Office.Server.Search.dll but was not handled in user code
Additional information: Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.
Any suggestion ?
Thanks in Advance.

Hi,
Please provide more specific information about the issue. What type of content source you tried creating via powershell?
Make sure you are using the approproate permission and search service application.
Here is the reference for creating content resource via script:
http://technet.microsoft.com/en-us/library/ff607867(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support

How do I prevent files from being backed up to iCloud and iTunes?

I have created the ios app using adobe AIR16 and flash cc. After submission of my aap into aapstore, I received a message from Apple with the following message –
From Apple
2.23 - Apps must follow the iOS Data Storage Guidelines or they will be rejected.
By using xcode we can prevent files from being backed up to icloud and itunes, but i want to know that what is the way to achieve this by using AIR. While creating an explicit app id from apple developer account , i am not enabling icloud support.

Within AIR you can set the File.preventBackup property to true on a directory or file to prohibit that content from being backed up to the cloud:
File - Adobe ActionScript® 3 (AS3 ) API Reference
This is all you need to call when you first create the folder or file to have it work with iOS backup guidelines.

I receive numerous messages in "Bulk Mail". Where do they come from and how can I prevent them from being received? Thanks

I receive numerous messages in "Bulk Mail". Where do they come from and how can I prevent them from being received? Thanks

Once you're on a spammer's list, there's nothing you can do to stop the flood of e-mail messages. You can either control it, using spam filtering (which is what files those messages in the Junk Mail folder), or you can throw out your e-mail address and get a new one.
It's sad, but spam is simply a fact of life at this point, and there's nothing to be done about it. Legislation has been tried, with zero success, since most spam either comes from countries with no legislation or from personal computers that have been infected with malware and are part of a "botnet."

Is there a way to prevent a PDF file from being forwarded?

is there a way to prevent a PDF file from being forwarded? For example, im a personal trainer and if i send a client a plan via PDF file, i want to make sure that they cannot send it to anyone else. I read about how you can secure a file by creating an ID and then having the recipient create an ID as well, but i would like to make the orocess as easy as possible for my clients and not have to have them create an ID and then send it to me. is there a better way to block the recipient from resending the PDF?

Hi Kiana,
As such there is no option to prevent the recipients from forwarding the pdf. However you can refer to this blog How do I prevent someone from forwarding a PDF?, it might be of some help.
Regards,
Aadesh

How do I keep emails from being deleted on my iPhone 6? Emails get deleted from phone when I startup desktop computer and they are downloaded from sever. Is POP3 no longer supported on IOS 8.1?

How do I keep emails from being deleted on my iPhone 6? Emails get deleted from phone when I startup desktop computer and they are downloaded from sever. Is POP3 no longer supported on IOS 8.1?

Have you seen this?
Using a POP account with more than one device - Apple Support
A better solution is if your email provider uses IMAP. IMAP sync email folders between multiple devices. Meaning any device will receive the email, all sent email can be seen on the devices. If you delete email from one device the email is deleted from all the other devices. Check with your email provider to see if they offer IMAP services.
If they do not your choices are to 1) configure email on the PC to keep Mail on the mail server or 2) change email providers to something like Gmail or Outlook.com (as examples). FWIW I use Cox IMAP email and fully sync email between a Win 8.1 Update 1 laptop, a Win 7 desktop, an iPad 4, an iPhone 4 and an iPhone 5S.

The application detected an error that prevents changes from being saved.

Hi. I'm having this problem almost all the time when I do some color correction.
"The application detected an error that prevents changes from being saved. To avoid losing your work, quit Final Cut Pro."
Any ideas why this is happening?
I'm on a 2010 Mac Pro running latest Mavericks and latest FCP X.
I already removed FCP X, and all the effects I have installed. But still the issue persists.
Thanks.

That could have happened. I can't remember though.
Is there any work around?
I currently only have 1 open library and 1 event on it. If I move or copy that event into a new library, would that in theory work?
Thanks for the help so far.

Is there any way to prevent fields from being overwritten when importing data via xdp-file?

In an pdf-form designed with LCD everytime the form gets merged with an xdp-datafile content of all fields get overwritten, regardless which data-binding (normal, global, none) is assigned to the fields and regardless if the fields are exluded in the xdp-datafile. Is this normal behavior and is there any way to prevent fields from being overwritten?

The xdp-file is first exported from Acrobat Professional 8 (export data as *.xdp) to get the complete structure. Then in the xdp-file some fields are removed manually and other fields are filled with data. When the modified xdp-file is opened again with Acrobat Professional 8 it grabs the original pdf-form and merges the manually filled fields into the form. With the merge all other fields in the form are overwritten, even if they are not defined in the xdp-file. And that is what I want to avoid. I want to merge the xdp-file into the form and keep the data in fields not defined in the xdp-file.

Is there a way to prevent HTML from being displayed in forum?

Is there a way to prevent HTML from being displayed in forum in BC to avoid linking to other sites on an eCommerce site?

Thank you for your post!
Unfortunately there isn't a way to restrict customers to post on your forums links to other sites.
However what I suggest here is to choose to moderate each forum post and this way you can choose to approve or remove links from the posts sent by customers.
I hope this helps!
Andrei

Can I maually check for updates but prevent them from being automatically installed if it turns out one is available?

Can I maually check for updates but prevent them from being automatically installed if it turns out one is available?
Background:
In options I have "check for updates, but let me choose whether to install them" ticked. This works fine, in that I periodically receive a notice of an available update, and it will ask me whether I want to I want to install it.
But there are certain times -- for reasons I won't go into here (unless requested as part of seeking a solution) -- where I want to manually check for new versions, but RETAIN the ability to decide whether or not to install it. But if I click Help/About Firefox/Check for Updates, and it finds an update, it will immediately proceed to install it without asking for permission. While that seems quite inconsistent with my update preferences in Options, it is apparently normal behavior as described in https://support.mozilla.org/en-US/kb/update-firefox-latest-version#w_how-do-i-manually-check-for-updates.
So is there any way I can manually check for new-update availability but then refuse the update if I so choose? Once an unwanted install begins, I'm concerned that if I click cancel I could end up with a partial installation or some "messed up," duplicated or corrupted FF files (e.g., multiple versions appended with (1), (2) etc, similar to what sometimes confusingly happens when I do an XP System Restore).
Thanks.

I think what needs to be made very clear here is that when a user clicks on "check for updates" the software should bloody well CHECK for updates and most certainly SHOULD NOT proceed to download and apply any updates. this is misleading and intrusive.
I just wanted to check if there was an updated version but I DID NOT want to actually update at that moment. the software downloaded data, costing me money and tried to apply the update which could have potentially messed up my settings if I had not checked everything was ok first.
I actually discovered how to prevent the update by searching through windows and manually deleting the files but why should anyone have to go to such lengths?
the software should simply do as it is asked, not do things that have most certainly not been asked.

How can i stop an email from being sent? i cannot find an outbox in outlook

How can I stop an email from being sent. I cannot find an outbox in Outlook

Outlook is a Microsoft product, I'd suggest posting on the Office for Mac Product Forums.

DLP to prevent emails from a speciifc domain from being forwarded.

Similar Messages

Maybe you are looking for