DLSMusicDevice not playing some soundfonts!

Hi all,
I have logic studio 8 and I have recently bought some soundfonts for it. So I downloaded them, put the file into the Library/audio/sounds/banks, however, when I go onto Logic, open the DLSMusicDevice, and find the instruments, It only show's a few, and olny plays a few!
Can smeone please help!
Thanks

I am also having the same problem but with videos that I've purchased via Itunes (on my new touch nonetheless, not via my computer) all music I've ever purchased that is not a plus track (DRM Protected) and about 90% of my apps. The videos give a pop up message stating "Cannot play selected video" and the apps act similar to the music tracks where they load for about half a second and then go back to home screen. Anything that either is not DRM protected or that I got somewhere other than Itunes works fine. Also it should be noted that I did not register my iPod until a day after I first set it up due to my internet connection not working on Christmas day and I was unable to connect to the itunes store when I first synced my ipod. Everything worked fine until I registered it. This is my second Touch as I upgraded for christmas from a Gen 1 to a Gen 3. Everything still works on the Gen 1 fine.

Similar Messages

  • Hi, i m using mac (version 10.7.4 lion) and has safari (version 6.0). The problem is that the safari is not playing some of the youtube videos for the last few days. plz help

    Hi, i m using mac (version 10.7.4 lion) and has safari (version 6.0). The problem is that the safari is not playing some of the youtube videos for the last few days. kindly help

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • I just bought a few songs the other day and my i pod will not play some of them. what do i do about this?

    i just bought a few songs the other day and my ipod will not play some of them, they are there, but the name of the song isn't written in black. the name of the song is written in gray. plus i tried to figure out the problem and i plugged my i pod into my computer and it started downloading my pictures on my computer onto my i pod.what should I do???

    Delete them and redownload them by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Quicktime X will not play some Apple Mpeg 4 Movie Files

    Hi,
    Having a strange issue.  Quicktime X will not play some of my Apple Mpeg 4 Movie files anymore.
    The files open fine in Quicktime 7, but not Quicktime X. 
    I receive the error message "The document could not be opened. A required Codec is not available"
    I have installed other codecs (Flip4Mac as well as Perian), but no luck.  Have re-installed Quicktime X (10.1) and software is all up to date (running Lion 10.7.2).  The movie file works fine if I import it to iTunes as well.
    Called AppleCare Support and they could not come up with an solution.  Does anyone here have any ideas?
    Thanks!

    (BTW, I just realized this was an MPEG-4 topic - my issue wasn't necessairly centered around that architecture)
    Yes, I naturally assumed that you were having problems at some point with MPEG-4 Part 2 or Part 10 content.
    Since I mentioned "from," I should have mentioned what the codec/wrapper was (it was captured into a .mov file using DV/NTSC via "Capture Now" in Final Cut Pro studio V7, via an analog-to-digital converter).  What makes this confusing is that files captured with the same settings sometimes open right into QuickTime X with their audio/video intact, and at other times, only the audio shows up (where upon opening that same file in QT 7, we can see both audio and video). Interestingly, the problem files icon shows up on the desktop as the generic movie icon, whereas the "normal" files' icon is the first frame of the video.
    May we assume at this point that the source video data is DV-25 with 16-bit Interger (Linear PCM) audio sampled at 48.0 KHz and it is the scratch MOV file that may or may not open/play correctly in QT X but always opens correctly in QT 7?
    Ultimately, though, this is an unimportant point in solving my issue. Why? Well, if I can successfully open the problem files in Compressor (e.g., see/hear the video/audio), then I can theoretically re-compress (or "re-wrap?") them to whatever codec I want - ideally one 100% compatible with QuickTime X.
    I took a test file, placed it into Compressor, and applied the DV/NTSC setting to it (yes, I know, the same setting the file already had). After re-encoding (which took very little time), the file was perfectly executable in QuickTime X - both Audio and video showing as to be expected, and no real difference in quality (not that VHS source is quality to begin with).
    This sounds as if the "problem" file's container may be the source of the problem. As I don't know if your Compressor test is passing the data through to a new faile container, I would make an additional test here. If your version of QT 7 is keyed for pro use, I would simply use the "Save As..." File menu option to to create a new file container. In fact, I would probably just create a "reference" file rather than another "standalone" file here—a very, very fast operation—and then open the secondary file in the QT 7 "Properties" window to ensure all of the data tracks (1 video, 2 audio, and 1 timing) are present. If all looks good, I would then try opening the reference file in QT X to see it it now plays. (I.e., whether you use a reference file here or a standalone file, the object is to see if the QT X player will now recognize all contained data tracks whether resourced by reference or physically contained in/via the new wrapper.)
    Could this have been answered without knowing the complete "from" specs? Probably… which is why I posted to the help forum in the first place - the goal being some other reader may have had the same issue, and had a handy solution or suggestion, saving me the time of experimentation (what forums are great for).
    I don't know about you, but I would still be looking at profile/level combination settings to see if an an assumed MPEG-4/AVC video and/or AAC audio settings had been properly encoded for QT playback.
    I have no doubt that there's a technical difference between the files that created this issue in the first place. But, the solution of re-compressing with an identical codec did the trick, which for this project is good enough for me.
    Recompressing data is slower than rewrapping data which is slower than rereferencing the data pointers. But, if your solution works, then that is all that matters.

  • Equium A100-306: built-in speakers do not play some sounds

    I have had my A100-306 for 2 weeks, and my built-in speakers do not play some sounds. This problem has only arisen over the last few days. When I go through the control panel to speaker settings it says there is no speakers.
    Can any one advise me as to what to do to fix this problem?

    Very strange
    I think you should check several possibilities:
    - connect the headphones and check if you can hear the sound through the headphones.
    - Please check the device manger. Do you see any yellow exclamation marks???
    Try to remove the sound card and remove the sound driver.
    After new reboot try to reinstall the sound driver again.
    - On the notebook the Realtek HD sound effect manager should be installed.
    Please check there the settings.

  • Why not play some videos macbook air

    why not play some internet videos my mac book air

    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Follow the prompts.
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.

  • My iphone 4 does not play some songs, that previosly it did

    My iphone 4 does not play some songs, that previosly it did

    Im having a similar problem since i upgraded to IOS5, ive read on other forums that some people's music hasnt even showed up, so they did a soft reset (turned it off and on again) which worked for them.
    It didnt for me, i have found some of the songs will play if i press the repeat once button, but this isnt really fixing the problem.

  • DVD drive does not play some DVDs properly

    Hi,
    My Macbook was purchased in 2007; So it is a bit old. I haven't used the DVD drive very often.
    I bought two new DVDs from Amazon recently. However, when I played them in my Macbook using DVD Player, the disk pauses and skips very often, making it impossible to watch the DVD. In addition, the Player would display the "Skip over damaged data" warning.
    I thought it was a problem with the software (DVD Player); so I installed the VLC player. Problems occurred as well. Disk would pause and then simply stop (the screen closes).
    I thought that perhaps it was the problem with the Amazon DVD disk. So I played some other DVDs in my Macbook, with both DVD Player and VLC Player. There was NO problem at all with the other DVDs.
    Then my conclusion was that the Amazon DVD was faulty. I requested a replacement, which they sent to me promptly within a day.
    However, the same problem occured. The replacement DVD would not play properly in either DVD Player or VLC Player in my Macbook. It would pause and skip very frequenntly.
    Now I began to suspect that maybe the Optical Drive was faulty. So I brought the DVD to my school and tried to play it in two computers: one PC (with VLC); the other Mac (DVD Player). To my surprise, the DVD played flawlessly in those two computers.
    Now my conclusion is that the optical drive of my Macbook is faulty.
    However, after doing some preliminary research on the internet, I find that replacing the internal optical drive is a difficult process. The alternative seems to be buying an external drive. But there seems to be concern about booting the computer (when the need arises) from an external optical drive.
    Questions:
    1. Is my conclusion justified? (That I have a faulty optical DVD drive)
    2. If the optical drive is faulty, then why do some DVDs play with no problem in my Macbook?
    3. Would you recommend replacing the internal drive or puchasing an external optical drive? What are the advantages and disadvantages to both?
    Thanks a lot!

    Thanks again. I went ahead and deleted the DVD Player folder and the plist file.
    The result is that it appeared to temporarily improve the playback of the DVD. For the first two hours, the DVD paused considerably less and each pause was of a relatively short duration. There was much less skipping. So the playback was almost tolerable, if I lower my standards.
    However, after two hours, it reverted to its old ways. The pauses and skipping became so frequent and long (as before) to make the DVD simply unwatchable.
    I don't know what to make of this.

  • Flash 10.1 installs in Vista and XP but will not play some content

    I started this morning by thinking the problem I am experiencing with Flash Player 10.1 is a version of the problem discussed in this forum  under "Flash 10.1 not working in User account."  I now recognize that it is a different problem.
    First, FP 10.1 (specifically v. 10.1.53.64) installs fine either in Vista Ultimate 64 (IE Active-X or FireFox Add-in--I use and work in an administrator account) or XP (multiboot machine).  I can confirm the installation at http://kb2.adobe.com/cps/155/tn_15507.html and the FLVs at http://www.acpmh.unimelb.edu.au/resources/resources-education.html play with no problem.
    Some content, however, simply will not play.  I need badly to look at http://library.creativecow.net/articles/hansen_jaysen/growing/video-tutorial.php and it hangs and tells me I need Flash Player--both in IE and FF.  I have repeatedly uninstalled FP, rebooted, and reinstalled but that doesn't change anything.  Worse still, since I use Adobe Connect a lot, Connect hangs when I try to enter a meeting.  Exactly the same thing occurs on my laptop which runs Vista 64 Home.
    I have tried everything I can think of and searched with every strategy that seems promising but I have found nothing on this problem.  Surely I can't be the only person experiencing this!. Does anyone have any idea what is going on and how to deal with this problem?
    Thanks in advance!!!

    I have exactly the same problem as the OP, on both my desktop (Windows XP) and my laptop (Windows Vista).  Both PCs have the latest versions of Chrome, Firefox, Opera and IE but no browser on either PC will display video content from the BBC website bbc.co.uk/news any more.  Before the Flash Player 10.1 upgrade about 10 days ago everything worked fine.
    It still works on YouTube videos and the OP's http://www.acpmh.unimelb.edu.au/resources/resources-education.html but it won't play http://library.creativecow.net/articles/hansen_jaysen/growing/video-tutorial.php that the OP wants to view.
    All that happens is that the first static frame is shown, but the 'telephone dial' animated icon (circle of white dots) just keeps going around forever and everything stays frozen and there's no sound.  Except when I've uninstalled Flash, there is no error message.  I've tried going back to a System Restore point but it didn't work; perhaps it's not far back enough.
    http://www.adobe.com/software/flash/about/ confirms that I have the latest Flash version 10.1.53.64, it says it's successfully installed and plays the rotating 'italic F' animation.  Incidentally, that's a better test page than http://kb2.adobe.com/cps/155/tn_15507.html as referenced by the OP which seems out of date and claims that 10.0 is the latest version.
    I've temporarily switched off my Firewall (Windows or Zone Alarm).  I've uninstalled and re-installed Flash several times for each browser on each PC, using both the Vista Control Panel and Adobe's uninstaller, I've tried switching off the hardware acceleration but nothing has fixed the problem.
    Some other points (sorry if they are red herrings, please excuse my ignorance):-
    If you uninstall Flash but find the test page still works, remember that the Chrome browser has Flash embedded within it.  See http://www.google.com/support/chrome/bin/answer.py?hl=en&answer=108086dobe Flash?
    Is Shockwave Player the same as Adobe's Flash player?  Very confusing!
    Apologies if this hasn't solved your problem, but perhaps it shows that something in Flash Player 10.1.53.64 really is broken.  If some sites never work any more but others will, it's just too much of a coincidence !

  • ITunes not playing some music videos

    My iTunes (ver. 10.1) will play the audio for some music videos but not the video. They are videos that were downloaded via the iTunes Store in the past and all but 2 are doing this and they are all the same format. No, I'm not using AirTunes! And I haven't exceeded my "authorizations" limit. I'm just trying to play the videos on my laptop with regular speakers. TV Shows and short films that I have work fine, and so do some videos that I got from outside of the Store. I tried opening them in Quicktime and it does the exact same thing, audio but no video. I tried repairing permissions and nothing changed. I even went back into my Time Machine and when I did that the files wouldn't work from there either, even though I know they worked a year ago! At first, it showed the file thumbnail, but when I clicked on it the thumbnail went gray. Any ideas what the heck is going on here???

    Alright! Looks like the latest update to iTunes actually fixed my problem!
    I noticed in the update notes that it was supposed to address certain problems with the graphics card (Nvidia 9400 and 9600) not playing certain video files correctly. I thought it was worth a try, so after I updated I played the videos that previously were not working and voila! They work now!
    For those of you who had a similar problem I would try it with the iTunes 10.1.1 (4) update and see if they work. Otherwise, I guess you've got a different problem. Good luck!

  • 500GB StorE TV not playing some AVI files

    Hoping someone can help please!
    I recently purchased a StorE TV 500GB here in South Africa.
    The device works perfectly on AV and HDMI, am very happy with it. Except some AVI files which I have that I can play on my PC/Laptop do not play on the StorE TV through either the HDMI or the AV connection?
    I am assuming that the AVI files do not fit the specifications of the StorE? If I converted them to MP4, what are the best settings, dimensions, encoding format etc I should use? I will be using a program called Handbbrake.
    Thanks in advance.

    Hi, I am from SA too, and also recently bought one 500gb .
    I assume you didnt read the manual, cos it says it only supports certain files and with a Max Resolution of 720 x 576 !!
    I think alot of ppl only check the file name and forget about the supported resolution.
    so if any avi / mp4 files have a higher resolution it wont play. so try setting Handbbrake to recode with that resolution.
    I have tried this with my recode software and it then works.
    ( and no it doesnt play .mkv files , so you'll need to convert any of these too )
    Regards

  • Ipad not playing some music

    i had downloaded some music a few years ago onto my desk top and then transfered it to my ipad.. i recently went to play the music and it was grayed out and would not play music...
    help

    Any song that is grayed out is not on your iPad.
    It may be lost in a file in the computer.
    If you can find and rebuild the path to iTunes on the computer and get the music to play, it will sync and play on the iPad.

  • Is there a way to NOT play some songs in the Library while on Party Shuffle

    Is there a way I can tell my iTunes AND my iPod NOT to play certain songs when I am listening on Party Shuffle?
    For Example - I have a number of songs that I downloaded for the Holidays - the Genre is Holiday - and I don't want to listen to them during most of the year - can I tell iTunes AND my iPod NOT to play them when I have it on 'Party Shuffle' or when I am playing from the Library ?
    Thanks!
    Dell Dimension   Windows XP Pro   iTunes 6
    Dell Dimension   Windows XP Pro  

    Make a "smart playlist" and set the parameters as genres NOT Holiday
    and then in the Party Shuffle get Party Shuffle to play from that smart playlist and then Party Shuffle will not play your Holiday songs
    I hope this helps
    -TBird

  • ITunes Will Not Play Some Songs

    I have all my songs (about 4000) on an external hard drive - a mixture of mp3's and m4a's. Last week it seemed to lose all of my Music Library and sub-folders. However I ran a chkdsk and this seemed to recover them. Most songs that I've played through iTunes since then seem ok. However it is still regularly coming up with a few that just will not play so I'm guessing they got corrupted when the disk had its wobble. I've run an mp3 validator on all the mp3's to quickly identify those. Is there an equivalent utility I can run on m4a's or something in iTunes that will check the validity of all the files in its library?

    SET0TITAN wrote:
    but then i can open that same file in Media Player, Quicktime, VLC, WinAmp, Nero player and on my iPod.
    You have the classic symptoms of iTunes being strict/finicky/incompetent (pick your own interpretation) about slight variations in MP3 formats. Treating the files with a 3rd party tag cleanup program such as MP3 Validator usually solves the problem.
    i'm going to have to wait for an update.
    Actually this problem has been getting worse in recent years. Use MP3 Validator.

  • JMF can not play some MP3 files on the web

    I try to write the application using JMF with MP3 plug-in. The application will search the word in Google dictionary
    and play the MP3 sounf online.
    The almost word is playing good with the MP3PLAYER, but some is always no sound.
    And Itry to add ControllerListener for this, and every word got the realizeComplete and endOfMedia event.
    but I just can not here the sound for some word.
    for example -
    http://www.google.com.tw/dictionary/sounds/actress.mp3 does not work
    http://www.google.com.tw/dictionary/sounds/actual.mp3 work
    This is one first java application. And I got stuck for couple days. Is anyone can give me some hint ?
    Thanks !!!!!!!!!!!!!!!!!!!!

    CAL297297 wrote:
    But my requirement is to play the MP3 immediately when the user search the word.
    Covert from MP3 to and WAV take too much time. I never said to do that as a solution, I told you to do that "to test that" the problem is that you're trying to play unsupported MP3s. Please do listen when people are trying to help you out.
    Is there any other soulution except JMF ?To play mp3 files? Ummmm, yeah...go Google to your heart's content on ways to play MP3s (but you'll have to find another forum for help with that, because this forum is only for JMF)

Maybe you are looking for