DLT isn't showing up anymore

My DLT drive won't show up anymore as an option. I know the DVDSP version didn't change but could this be an issue triggered by my upgrade to FCS2?
The only other change I've made since I last used the DLT was adding a sata pci card. Are there any known issues with sata cards and scsi cards not playing nice?
It's a Lacie sata card and an ATTO UL4s scsi card. I went to ATTO today and downloaded a driver but that didn't seem to do anything for me.
Any thoughts?

Hi -
Did you get this solved? I use a Quantum DLT 4000 and have a problem. I reinstalled my OS on a new drive but don't have current drivers for the card and drive.
Do you know if I need drivers for both or just one?
Thanks
Dave

Similar Messages

  • My gmail account isn't showing up anymore.

    Hi,
    My gmail account on my iPhone isn't showing any - new or old - messages on my iPhone.
    Any suggestions? I did a hard reset already for another problem, but that is pretty much all I've tried.
    Brandon

    Try deleting the account and adding it again.

  • Video Camera Option isn't showing up anymore?

    I updated my iTunes today, and later synced my iPhone as well.
    Now, I don't have the option to switch from camera to video camera.
    How can I fix this?
    it's frustrating, really since I use the video camera a lot more.

    Do you have a 3GS?
    If not, I would suggest downloading the application you were using for video.
    If you are, I would suggest restoring the iPhone.

  • I can't find the apple tv on my television.  No matter which input I use it isn't showing up anymore.  What is going on?

    It worked fine out of the box and on occasion it comes up after I mess with the inputs enough, but I can't figure out what is bringing it up and why it doesn't just come up on one particular input.  Help!

    Assuming you are cycling through the inputs correctly with your remote, I'm not sure there is anything you can be doing wrong.
    You don't say so but are you going through any other devices with HDMI, say a receiver or a switch.
    You are aware that the Apple TV may not allow itself to be switched on unless your TV is set to the correct source. So you need to determine which output the Apple TV is using, you can do this by noting it when you see it working or looking at the markings on the TV where you plugged the Apple TV in. Use your remote to cycle to that input source and then push the menu button on the Apple TV to turn it on.

  • How can I get the picture to show in Photoshop?  The thumbnail image appears in the right side panel but the full image isn't showing at all.

    How can I get the picture to show in Photoshop CS3?  The thumbnail image appears in the right side panel but the full image isn't showing at all.

    What specific information would you need?  The program was working just fine early yesterday morning and than when I came back in the afternoon to edit  some more pictures that is when I wasn't able to see the full image anymore.  It is providing me with all of the editing options as if the picture is there but it is just a blank screen with the thumbnail pic showing in the right panel. 

  • External drive not showing up anymore

    I have a wd mybook 500gb.
    one part is mac filesystem, the other is FAT. FAT isnt showing up anymore, only mac.
    I try disk utility, but the repair says "unable to read FAT." "read input/output error"
    it disappeared before, however the repair worked previously and then i could mount it again. not this time.
    any ideas? is the information still recoverable at least?

    Sounds like that part of the partition is dead and you need to replace the hard disk. If you can get it to be read by a PC, it says the drive isn't dead, but its firmware makes it impossible to be read by the current file system like how this bug happened*:
    http://www.macmaps.com/firewirebug2.html
    - * Links to my pages may give me compensation.

  • I am trying to fill in a PDF online- there should be a submit button but it isn't showing. My partner has an identical Mac and can see the button- what do I change in system preferences to resolve?

    I am trying to fill in a PDF form online- there should be a submit button but it isn't showing. My partner has an identical Mac and can see the button when he opens the same page- what do I change in my systen system preferences to resolve this?

    You and your partner might have different browsers, different versions of the same browser, or most likely a fervent version of the PDF plug-in.
    See if just clicking on the Enter key sends the form in.

  • My iPod nano g7 isn't showing up on iTunes although i plug it in. it shows on the computer but not on iTunes. also it won't sync , accept new songs and doesn't  put on podcasts. it is new, i got it for christmas. PLEASE HELP

    my iPod nano g7 isn't showing up on iTunes although i plug it in. it shows on the computer but not on iTunes. also it won't sync , accept new songs and doesn't  put on podcasts. it is new, i got it for christmas. PLEASE HELP

    Hi avmary11,
    If your are having issues with your iPod not being recognized by iTunes (but it is being recognized by the computer), you may find the following article helpful:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    Regards,
    - Brenden

  • I can't connect my ipod touch to my itunes. itunes isn't showing it's connected but my computer knows it's there

    Hey, i've tried connecting my ipod to my laptop itunes and it's not working. My laptop shows it's connected but itunes isn't showing it's there. i've tired reinstalling, taking itunes off rebooting the laptop and putting it back on. I don't know how to get it working. Plus on top i restarted my ipod and the choice between wifi and connecting to itunes i'm choosing itunes but it's still not showing up. I can use the help for the Windows 7 and ipod touch. Please and Thank you!

    If you tried here:
    iOS: Device not recognized in iTunes for Windows
    Then try a different computer to help determine if you have a computer or iPod problem.

  • I registered my new iPhone 5s to my usual Apple ID, however it isn't showing in my devices when I log in. I tried to register it by adding a new device, but it tells me it's already registered to a different Apple ID. I'm really not sure how to fix this.

    I registered my new iPhone 5s to my usual Apple ID, however it isn't showing in my devices when I log in. I tried to register it by adding a new device, but it tells me it's already registered to a different Apple ID. I'm really not sure how to fix this. I only have the one Apple ID and the phone is brand new, purchased directly from Apple.
    When I check on the phone itself (iCloud and App Store settings) the Apple ID is correct. I'm not sure where else to check.
    Whilst setting up the phone, it prompted me to register, which I did. Then when connecting to my laptop through iTunes it prompted me again so I registered again. I even got a confirmation email to the email address associated with my Apple ID that the registration was successful.
    How can I add my iPhone 5s to the list of devices on the correct Apple ID?
    Thanks in advance for any advice.

    Found the answer to my question after posting (in related discussions)
    https://discussions.apple.com/message/12331666#12331666
    Will call Apple Care as soon as I can.

  • I just downloaded iOS 7, and on my home screen at the top the battery, time and service isn't showing up. How do I fix that

    I just downloaded iOS 7, and on my home screen at the top the battery, time and service isn't showing up. How do I fix that

    Hi Michellem_14,
    Have you reset or restarted your iPhone since the update?
    Hold down the home button and the power button until you see an Apple logo
    Release both buttons and the iPhone will restart.

  • Updated OS & now Time Capsule icon isn't showing up on desktop

    Just finally upgraded to 10.5. Now my Time Capsule icon isn't showing up on my desktop. Light is green on TC and I can navigate to it through Macintosh HD folder, then shared devices. I just used it as an additional external hard drive at this point. How do I get the icon to reappear. I already updated Airport too.

    cybergroupie wrote:
    my Time Capsule icon isn't showing up on my desktop.
    Presuming you mean the volume of the Time Capsule's internal disk, mount that, open the Accounts panel of System Preferences, authenticate by clicking on the lock if it's "closed", select your account, select the "Login Items" tab, then drag the icon of that drive to the login items list.
    Note that this will cause a window of that drive to appear each time you log in. If you search these discussions, you may find some older threads that discuss ways around that.

  • Complete My Album isn't showing up as an option?

    I purchased five songs off of an album because I didn't have the funds to buy the full album but now I do and iTunes isn't showing the option to complete my album. Help?

    http://support.apple.com/kb/ts1538

  • My LAN connection isn't showing up!

    MY ethernet port isn't showing up on my device manager. there is a jack on the back and it does light up when I put in a network cable but nothing else happens. Right now I'm using my wireless card and thats the only thing that shows up under network adapters.
    So does anyone know how I get my ethernet port to show up?
    Kinda pointless to goto a lan party without a working ethernet jack  
    thanks for your time!

    It's normally under Integrated Peripherals. I downloaded your manual, and they show there should be such a section, but there are not details on the settings, so just look for something that refers to lan or ethernet.

  • My ipod touch isn't showing up on my itunes and i've done all the techniques the trouble shooting manual suggested. I have an after market cord, could that be the problem?

    My ipod touch isn't showing up on my itunes, I have an after market cord, is that the problem?

    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

Maybe you are looking for

  • What is the best way to import and export footage from the 5D Mark II?

    Hello, I've just finished shooting what I am considering to be my directorial masterpiece.  Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing.  Now I am ready to start editing and have been using premiere lately, but I have yet to

  • OBIEE 11g Dashboard dropdown

    Hi, In OBIEE 11g the dashboards are located in a dropdown box (to choose from), not so nice - I think. Is it possible to change this appearance so it looks like in OBIEE 10g? Hopefully a setting somewhere.........

  • How I can fix my music pics?

    I tried to transfer a movie from my ipad to pc and it didn't work but instead something happen My songs cover , I mean the pictures of singers is not there music still in library but  I like to have the pics of The singers someone help me please. Tha

  • DATABASE performance is very high

    Hi,   I'm having the following code. its performance is very high. Is it possible to reduce the processing time? SELECT  objnr gjahr kstar beknz twaer             wtg001 wtg002 wtg003 wtg004 wtg005 wtg006             wtg007 wtg008 wtg009 wtg010 wtg01

  • I'm having problems printing on a Konica Minolta C224 printer

    Sometimes when I send CAD files to the BizHub C224 printer the image prints very small almost postage stamp size.  It does not happen all of the time.  Some days I can restart my computer and it seems to work for a while.