DLU Volatile Users not clearing down

Hi all.
We're having some issues (amongst many) with 11.2.1 DLU policy and it not clearing volatile users accounts down when it should. We currently have the student policy to clear down after 2 days, but this is not happening.
It's possible our many other Zen issues is having an effect, but we were getting this on Windows 7 workstations prior to 11.2.1 also.
Setup is 11.2.1 MU2 on servers, currently a mixed MU1 and MU2 agent on devices (it's still slowly rolling out).

Hi James,
verify the root cause in your environment:
are Profiles cleared completely: ProfileList entry under HKLM, ntuser.dat and complete structure under c:\user\... ?
OR are there remains of folders under c:\users\...
To my experince under WIndows 7 the problem is mostly only that folders remain from the profile - the rest is removed. The folders are empty in most cases.
If this is the case and a problem for you, you would need to create a folder deletion script.
The folder remains have 2 implications:
USers can see other usernames that logged on to this machine under c:\users\.... However not open or browse it.
NEw Profiles will be created with username.machine.001 etc. because WIndows Profile Service doesnt find an entry for the user under HKLM ProfileList but the folder c:\users\%username% is occupied so it needs to create it with .001
this may be only a cosmetical Problem depending on your environment.
another thing: Im not sure disbling the MS Client makes any sense. Since you experinced delprof2 not working without it - it may lead to problems anyway regarding profile services.
regards
Markus
Originally Posted by JR1CCB
Hi Markus.
Many thanks for your reply.
I have created a bundle using delprof2, and the problem seems to be that it relies on the Client for Microsoft Networks, which we have uninstalled (as tested by running it on a machine with the Microsoft client enabled).
So the Novell DLU policy is only deleting the users registry hive heys? That seems useless.
James

Similar Messages

End Planning Run After Order Selection - issue not clearing down all plans

Hi,
We are using the CTM Profile with "End Planning Run After Order Selection" ticked in the basic settings tab in order to clear down previous CTM runs. So we have a CTM deletion profile.
The issue is that it requires more than one execution to clear down the Planned Orders / Purchase Requisitions. You execute the Deletion CTM Profile once and it will clear down some of the Purchase Requisitions and Planned Orders and leave some still in place. You then have to execute the deletion CTM profile one or two more times in order to delete the remaining Planned Orders / Purchase Requisitions.
This is clearly not realiable for a batch process to clear down plans. Has anyone else experienced this and does anyone have a solution. The solution cannot be based on RLCDELETE or /SAPAPO/DELETE_PP_ORDER
Mark

Hi,
Can you check your planning mode and deletion mode combination defined in the ctm profile.
Prerequisties for deleting the orders:
u2022 They are within the planning and deletion periods
u2022 They do not have pegging relationships with demands outside of the planning period
They lie outside of the production horizon, stock transfer horizon and the planned delivery time
In addition, all location products of an order must be included in the Master Data Selection so that CTM can
delete the order. Also, CTM cannot delete any manually fixed orders.
If you have selected the SNP Order order type in the CTM profile, CTM cannot delete any PP/DS orders. This
restriction is also valid the other way round for the PP/DS Order order type. If you select this order type, CTM also
deletes SNP orders.
Thanks,
nandha

F-29 Down payment not clearing down payment request

Hello,
I'm working to configure milestone billing plans in our sandbox environment. I'm able to create a sales order with the new order type that's linked to the billing plan, and I have successfully created the down payment request. I can see the two FM postings for value type 83 (the negative to 0100 and the positive to 0200). Then I post the F-29 down payment. I've referenced the sales order in the down payment. But I'm not seeing an FM posting for value type 58 to reduce the down payment request. The down payment request is not being cleared by the down payment. Do you have any suggestions for any of the following:
- configuration I may have missed
- information that may have been entered incorrectly on the F-29
I can see the uncleared down payment itself when I pull up the customer account of the payer. Did I miss a step to match up the F-29 to the down payment request? I've configured the step for automatic down payments in public sector management, and I made sure that the sales order type is the one indicated in that step and the document type of the F-29 is the down payment document type indicated in that step. Any guidance would be appreciated.
Thank you,
April

Check what is the accounting doc type for the down payment request.
If it is RV then use tcode F-28 to receive payment for the transaction, as you are receiving payment against invoice.
Hope this can assist you. Or contact your FI team member for understanding.
Thanks & Regards
JP

Down payment doc not cleared in Payment Run F110

Dear Friends,
Document 1700000043 is a reversal of down payment which should be settle with final invoice 5400212994. Both documents have the same due date, but only 5400212994 was cleared with a payment run.
Please can anybody clarify why document 1700000043 was not cleared with a payment run.
I checked in Exception list and found error message as "No Payment possible because Items with a debit balance still exists; see job log"
User follow the below process:
1) Downpayment made as below on 08.10.2009
Vendor                                   29.000,00
LC El PaymClrng Ac               34.510,00-
Payables Tax Input                  5.510,00
1) GR posgted on 26.11.2009
            Engineering Service   41.700,00
            GR/IR - Services         41.700,00-
3) IR posted on 26.11.2009 and Net due date 23.12.2009
         Vendor                           49.623,00-
          GR/IR                              41.700,00
          Payables Tax Input           7.923,00
4) Downpayment Reversal on 26.11.2009
      Vendor (PK 39)                 29.000,00-
       Venfor (PK 26)                34.510,00
       Payables Tax Input           5.510,00-
Please check above process and let me know if any details are needed for further.
Thanks,
Venkat

HI Venkat,
Sorry Venkat. It is the clarance in F-54 not the Revesal.
After clearance, the amount 29.000,00 is posted to Vendor Spl GL. So nullified this account.
Once cleared, the amount is posted to Normal Vendor ac as 34.510,00 (Doc 1700000043)
So this doc is not picked in Payment Run.
Invoice amount is 49.623,00-. So the difference 15113 (49.623,00-34.510,00) should be cleared in Payment run. It is not done.
My assumption is there is the amount difference between Normal Vendor to Speial Vendor (34,510 - 29000). Is it the cause to not picked the doc 1700000043 in payment run.
Please advise what I can do?
Thanks
Venkat

Volatile User's not being removed

We have a DLU policy that has volatile user implimented. I have been
noticing that sometimes, the user doesn't get deleted and they have a
folder in C:\documents and settings\ and their username still exists in
the windows user management console, which causes problem with the user
not being able to logon later on. It says "Account created by Novell
Zenworks" in the description box besides the user name also.
What causes this and is there anyway we can fix it so that volatile user
works everytime?
We are running Netware 6.5 servers and Zenworks 6.5.

Tried uphclean ?, see TID 10096547
Cheers Dave
Dave Parkes [NSCS]
Occasionally resident at http://support-forums.novell.com/

Drop down history will not clear

no matter what i've tried the drop down history will not clear, the same history has been on there forever

If you wish to stop the History items showing in your location bar dropdowns my original post gave alink to an article explaining you to do that : by using your '''Privacy''' settings . If that fails to work then look at [[Preferences are not saved]]
Firefox keeps say your last 18o days history, so in 10 years time it will still be showing history, even if it is still the last previous 180 days.
Re the variable expiry date for history: this was settable form the main User Interface until very recently, up to about version 3.5, it must now be set using about:config
* see http://kb.mozillazine.org/Browser.history_expire_days

Down payment to recipient 28000437 0 area 01 amount 575.50 not cleared in

IN CJ88
Down payment to recipient 28000437 0 area 01 amount 575.50 not cleared
Message no. AW605
Diagnosis
All downpayments were not cleared for the asset under construction for the receiver 28000437 0 in area 01. An amount of 575.50 was not cleared, or too much was cleared.
You can only completely transfer an asset under construction if you reverse the down payments in the current fiscal year beforehand.
Procedure
Clear the downpayments that you want to settle to receiver 28000437 0.
Sachin Indulkar

Hi Sachin,
You need to clear your existing downpayments throu F-54
You can check the DP that you made for AUC in T code Aw01N. Double click on the down payments and will get you the documnet number . Clear this DP in F-54.
Regards
Aravind

AuC Down Payment not clearing

Hi Gurus,
The scenario is that we are using WBS elements to collect costs for AuC. So project Consumption POs were raised and down payments were made against them. Now at the year end some of these need to be settled to AuC.
This we did and down payments appeared on AuC through a default cost element mentioned in PS IMG u2018Define default cost elements for down paymentsu2019. This vendor down payment element 7XXXXXX has no Company code segment.
We understand that these down payments are to be cleared but since the account assignment object in actual vendor down payment line item has WBS element and when we clear it through F-52, clearing doesnu2019t update (FI AA) asset data since no asset number is mentioned in actual vendor down payment line item. So it keeps throwing following error message.
Down payment to recipient 7011000002 0 area 01 amount 2,200.00 not cleared
Message no. AW605
Diagnosis
All downpayments were not cleared for the asset under construction for the receiver 7011000002 0 in area 01. An amount of 2,200.00 was not cleared, or too much was cleared.
You can only completely transfer an asset under construction if you reverse the down payments in the current fiscal year beforehand.
Procedure
Clear the downpayments that you want to settle to receiver 7011000002 0.
Please help how to settle this without reversing downpayments as checks were issued to vendors already.

Hi
Reverse the settlement of WBS to AUC, first of all....
Clear the downpayments, which would again post to WBS...
Now settle WBS to AUC and AUC to Final asset...
br, Ajay M

Down payment not cleared with invoice trans f-54

Hi All,
I need help with down payment clearing with invoice. Purpose is to have open residual item for not paid invoice part.
I made such steps:
1. Vendor down payment request, trans F-47, (for instance) 90Eur
2. Make down payment, trans F110, 90Eur
3. Vendor invoice receipt, trans. FB60, 115Eur
4. Clear down payment, trans. F-54.
The problem is that clearing document is created, but actually down payment for 90Eur and invoice for 115Eur are not cleared, and residual item for 25Eur is not created. Using payment program (F110) again system suggest to pay whole invoice sum - 115Eur - that is quite dangerous.
I will be very thankful for your help.

Hi,
Have you cleared down payment against the invoice no. in F-54 ?
If you do so, there will be a link between the invoice & down payment document no. During F110, system will select both the documents together.
Also check in T code FB00 (Editing options) under "Open Items" tab, whether "include invoice reference" check box is selected.
If not, then select this check box & try the transaction once again.
Hope this helps you.
Regards,
Ashutosh

Down payments status not cleared.

Hi,
We are working with down payments by standard customizing. Everything works fine if the Down payment request has status cleared before the invoices, however If the down payment request still with status not cleared the following invoices doesnu2019t get the down payment and we can bill all the items from the milestone billing and if the down payment still not cleared it never appear in the invoices. So at the end the sales orders have sent to the client a bigger amount. That is a situation is wrong and we would like to avoid in order to avoid a lot of problems with our clients because the system doesnu2019t give any warning informing about you have send to the client the 120% of the sales order, if we have bill a down payment request for 20%. Our understanding the system always should get the down payment in the invoices or at least give a warning when you finish the billing without clear the down payments. We would like to know the right way to manage this situation.
Thank you and best regards.

HI Venkat,
Sorry Venkat. It is the clarance in F-54 not the Revesal.
After clearance, the amount 29.000,00 is posted to Vendor Spl GL. So nullified this account.
Once cleared, the amount is posted to Normal Vendor ac as 34.510,00 (Doc 1700000043)
So this doc is not picked in Payment Run.
Invoice amount is 49.623,00-. So the difference 15113 (49.623,00-34.510,00) should be cleared in Payment run. It is not done.
My assumption is there is the amount difference between Normal Vendor to Speial Vendor (34,510 - 29000). Is it the cause to not picked the doc 1700000043 in payment run.
Please advise what I can do?
Thanks
Venkat

How to clear the existing names in USER NAME drop down list in Sql Server Management Studion in Sql Server 2008 R2`.

Hi,
We have Sql Server 2008R2 clustered instance running in 2 nodes with Windows 2008R2 SP1 operating system. I would like to know how I could clear the existing names in the USER NAME drop down list in the Sql Server Management studio.
Thanking in you advance,
Binny Mathew,

SQL Server Management Studio 2008 delete the file:
C:\Users\%username%\AppData\Roaming\Microsoft\Microsoft SQL Server\100\Tools\Shell\SqlStudio.bin
http://dynamicsgpland.blogspot.in/2012/04/clearing-remembered-default-login-for.html

Logging in to remote site, reset safari does not clear the user login info?

I'm logging in to a remote site with a 2 step login. Authentication then citrix. User info is not cleared in the authentication portion when I reset safari. Must be stored somewhere else. Where should I look?

Launch the Keychain Access application and search for the server name.

When I open the "Save Page As" window, the drop-down box for the file name shows files that were saved long ago. This is not cleared by any "clear history" function that I can find. How do I clear this?

# Question
When I open the "Save Page As" window, the drop-down box for the file name shows files that were saved long ago. This is not cleared by any "clear history" function that I can find. How do I clear this?

Hello.
I believe this is a Windows related issue, since it's the windows Save File manager we're talking about here (right?). You should contact Microsoft for help on that one, I believe. You'd expect to be able to delete the entries by simply tapping ''Delete'' on your keyboard when they are focused (that's how it goes for deleting specific form autocomplete entries in Firefox), but I haven't tried that.
I'm sorry I can't be of more help.

I want to ask company when user update to ios7 it stuck all of device and not clearly about apple id to active how to solve it or just keep all of device into recycle because can not use?

i want to ask company when user update to ios7 it stuck all of device and not clearly about apple id to active how to solve it or just keep all of device into recycle because can not use?

You need to enter the Apple ID and password that was used to set up/activate the phone. There is no way around this.

History does not clear in address drop down menu

After going to tools--clear history, and tools--options on multiple occasions, my drop down history does not clear from my address bar, nor does it create new history. I still want control of my address bar, so "nothing" under location bar does not solve the problem either. Speaking to someone about this would be greatly appreciated.

The location bar drop down consists of your history and bookmarks, so it's possible that you're seeing bookmarks. Try setting it to only display history.

DLU Volatile Users not clearing down

Similar Messages

Maybe you are looking for