DLV status not updated in Process order
Hi guys,
I did GR and got goods receipt documents but system is not updating DLV status in process order.
Actually i have by-product and co-products as components in order. I did posting of by-product from Confirmation screen COR6N and for co-products i did MB31 and goods movement doc. get generated. Qty. is also updated in order but NOT the dlv status.
Pl.suggest
Dear,
This is System status and you cannnot maintain it manually once that Business Transaction(FULL Delivery) happens System will automatically sets that status.
DLV status updated once Del completed tick is activated in order header, This tick will get uodated once you do GR for complete qty.
You need to Final confirm (CNF) the Order to get the DLV Status.
Or if the Delivery completed indicator is set in the Process Order, then also th System status will be DLV.
If you want to make it manually then goto co02, enter the order, goto goods receipt tab page and activate delivery completed tick and save...DLV is activated in the head as status.
Please check in BS22-I0012
Regards,
R.Brahmankar
Similar Messages
-
Batch not updated in process order
hi all,
When i am doing batch determination and goods issue through coik pick list batch not update in process order. presently we are not doing batch determination in process order.after goods issue component batch fields are grey out in the process orderHY,
Batch field are filled only if you do Batch determiantion of components whether it is by auto or manual.And it is logical also becasue if you split the material qty. in more than one batches during goods issue( whether it is in COIK or in COR6N)then think what should be the case in Component screen in process order?
As soon as you complete the Goods Issue This field becomes gray but the filled of Quanity withdrawn is update with qty you have withdraw.
Regards
Dhaval -
WIP status (RESA) not updated for process order with co-product
Hi,
We are facing the scenario below, please confirm whether item 2 behaviour is standard SAP.
1. Process order with settlement rule MAT - after WIP calculated, status RESA is updated & FI document it posted.
2. Process order with settlement rule OIT (co-product) - after WIP calculated, status RESA not updated & FI document posted.
Thank you.Self found answer
-
Status not updated at sales order level though the billing is done.
HI,
This is related Third party sales, where i created order, billing but document status has been showing as BEING PROCESSED.
There are 3 line items, where one item status is showin as completed, and for other two line items status is being shown as BEING PROCESSED.
PLEASE LET ME KNOW THE REASONS.Read the following OSS notes to understand the status related to third party orders?
1) Note 210500 - Billing status of a third-party item
2) Note 549818 - FAQ: billing status for third-party items in sales order
Regards, -
Actual Cost & Quantity not update in Process Order
HI,
Process order confirmed from Production person before maintain the actity price rate.
hence those confirmation are gone in to the error & found in t.code COFC
afterword the activity rates are maintained & we reprocess those confirmation thorugh COFC, now there is no COFC entries
but still actual quantity & cost not updated.Hi Ajay
'Z_UPD_ACT_IN_OPR_UNICODE in the note 736018.... Ask your ABAPer to implement the program and execute the same
You may need to raise an OSS message incase the program is not available to download
BR,Ajay M -
Total Target Costs not updated in Process Order
Hi All,
I have a scenario in a Process Order,
The Process order is Released, Goods Issued and GR done. But the when i go and check the Cost Analysis i did not see anything in the Total Target Costs and Total Target Qty coloumns agianst all the cost elements. It show as zero for all.
It looks very strange. There is variance in the component issues and GR as well. I simulated for the same material with a new Process order and found the vales get populated automatically on GI and GR's with variation against requirement quantity.
Could any one explain me why it is so ..? or is my understanding is wrong.....?
Thanks for your time and patience.
Regards,
Srinath VSrinath Venkatr,
I think you are missing PP CO integration configuration during master data creation. There might be information massage to you during process order creation saying , 'Logs during Cost calculation", you are skipping the same and creating process order withought resolving the same.
Check whether you followed all the steps for product costing.
Material master,
BOM,
OPKP:-Controlling area-activate components and Controll indicators
:- Assignment of co codes
KS01: Cost center
KA01/KA06:- Primary/ Secondary Cost elements
KL01:-Activity Types
KP26:- Activity Price Planning
Then Work center/Resource- assign these cost center and activities with costing formulas.
Then Routing/Recepi-
After master data, demand management,MRP- process order. while creating process order check cost calculation errors.
Hopes that will clear your dought
Tara -
Status not updated in JCDS Order Operations
Hello Experts,
I have a requirement in which if status changes (either system or user status ) for any operation of an order, I need a table which shows object number , the date of status change .
In JCDS , when i change some Order Operations status they are reflected into JCDS with their change dates and when i change some Order Operations status they are not reflected into JCDS.
In JEST we have only status values but not the change date , i need the status change date.
I checked so many tables but they don't Order operation status change date.
Can any share some light , are they are restrictions that certain order types operations only get reflected into JCDS.
Thanks
VamsiHello All,
I have spoken to my functional team.
There is setting in SPRO or you can directly go to Tcde 'OIOE' and you have differnt plants and order types and you can set different flags accordingly the change pointers will be updated to JCDS.
From the next doument created after enabling this setting, the change documents are reflected in JCDS in our case.
Appreciate your help.
Thanks
vamsi -
Reg change in the status profile in the process order
Dear all,
By default one status profile ZPI0001 has been assigned to an order type ZP10 in a plant, the requirement is at the time of process order creation we want to change the status profile to ZPI0002 and create . this is applicable for one plant only
Please let me know the settings to be done for that
Thanks in advance
Regards
venkatHI Venkat,
I am not sure why do you need different status profile at the creation of process order...
First define the status profile ZPI0002 using Tcode BS01/BS02 and assign it to the order type ZP10 using CORN. The same order type is defined to plant using COR4..Here you can only have only one status profile for each order type, however, you can define different custom user status for the status profile..Say ZOCL - Order Completely closed after system status TECO to stop all goods movements...You can't have separate status profile while creating process order and at other stage of process order..Gurus please correct me if I am wrong..
Thanks
Sree... -
Actual data not updating in Pm order
Hi Experts,
We have a requirement from management for Having budget control based on department wise.
For that we are trying out substitution rule by which Pm order is replaced with Internal order .we are having a budget profile and budget for internal order.Now we are able to control budget and system stopping if budget exceeded in migo transaction .We are replacing pm order with IO order with substitution with pm order number range. Issue is after having this setting actual cost is not updating in Pm order and pm report.
Same is getting updated in mseg against pm order. Please
With regards
Anand.MAnand.M
This is not a PM issue...
You need to discuss this issue with your MM, FICO and ABAP teams.
PeteA -
Without standard release confirmation should not allow in process order
Our clients need is that without standard release confirmation should not allow in process order.
We are using CORK,cor6 and MB31 My need is to apply user exit in all cases.
I got input from sdn User exit:-PPCO0006 Function module Exit_SAPLCOZF_003
INCLUDE ZXCO1U06
I need to activate this only during confirmation.ie confirmation to be avoided if cost is not released.
Regards,
PertHi,
You are right. For preventing confirmation in case std cost estimate release is not available you need to do enhancement. You can check for following exit along with exit which you mentioned in your post :
Enhancement CONFPI05
EXIT_SAPLCORF_405 - Process Ord. Conf.: Cust.-Specific Enhancements when Saving
INCLUDE ZXCOFU10
Check either of the enhancements which may fulfill your business requirement.
Regards,
Tejas -
Target cost not appearing in process order
Hi All,
Please let me know the reasons for target cost not appearing in process order.
Thanks,
SAP PQTwo more scenarios:
1. You have co-product.
2. You reverse the variance calculation.
It will show the target cost only after you run variance calculation. -
Actual cost not updating in Pm order
Hi Experts,
We have a requirement from management for Having budget control based on department wise.
For that we are trying out substitution rule by which Pm order is replaced with Internal order .we are having a budget profile and budget for internal order.Now we are able to control budget and system stopping if budget exceeded in migo transaction .We are replacing pm order with IO order with substitution with pm order number range. Issue is after having this setting actual cost is not updating in Pm order and pm report.
Same is getting updated in mseg against pm order.
With regards
Anand.MHi Anand
Please add the budget profile at Plant maintenance order level no need to add any substitution rule
budget should also be control at order level
Thanks
trinath -
Operation does not fetch in process order
hi PP-Pi gru,
when i am creating process order from planed order , operation ( master recipe) does not fetch in process order..only take default operation 10, kindly suggest me how all operation will fetch in process order
another mater is when assign production profile in t- code CORU show the error massage " production scheduling profile for plant ALIV,order type does not exist"...but we have used stander order type PI01..kindly suggest me
Rogers
AqueelHi,
Check In master Recipe ,in the PI Tab,There must be some PI category is assigned and in that PI Category,this PI Charactiristic has been assigned.
First goto that Phase of the Master Recipe and then goto PI tab and then find the PI category.
You need to define production scheduling profile for your plant in OPKP which is assign to order type dependent parameter COR4 In planning screen. Please check. Also check the work scheduling view of material master.
Regards,
R.Brahmankar -
Condition type value not update in sales order
Hello Guru's
As per the sales order in VA01 the condition type value i.e surcharge value is not updating in sales order.
But I have maintain the condition record(Surcharge)also and in Condition technique I have checked every thing is correct .
please find below I have attached the Screen short .
Please give me solution Asap.Hi Sukdev,
Have you checked the respective pricing procedure for From and To reference step maintained against the condition type ZSUR?
Regards,
T.R.S.Praveen -
Qty withdrawn is not updating in prod order.
Hi gurus,
Qty wihdrawn is not updating in prod order , when i issuing
raw material through tcode mb1a 261 movement type.
What could be the possible reasons.Pls suggest.
Thanks in adv.
SudarshanDear
you are issuing the materials in MB1a w/o reference to the reservaton.
You need to do as below
In MB1a ---follow the menu path -Goos issue -->create w.referenec to order.
Enter the order number. execute the report
system will default matrerial no and qty/storage loc from order. Here you enter the qty requuired and post. This qty you posted in this way will refect/update the withdrawl qty in the production order.
You are not entering the order the way I suggested, hence it is going as a unplanned issue...hence the problem.
come back if required
Maybe you are looking for
-
Error while opening IRMS enabled documents
I have enabled IRMS settings at a document library in my site. I am having full control access to the site but I am not able to open any files under the library. I get an error message which says " cannot verify user information at this time. Do you
-
InDesign CS5 - Pdf interactif - texte dans une fenêtre flottante
Bonjour, Je suis en train de réaliser un pdf interactif dans InDesign CS5, j'ai intégré une vidéo dans une fenêtre flottante sans soucis. Je souhaite faire la même chose avec du texte (quelques lignes de texte et un bouton "lire la suite" qui ouvrira
-
Where do we save respective usernames
Hi All, Currently when we login into application with proper workspace, uname, pwd and then selecting a page we will be redirecting to LOGIN screen where we have give credentails to view the page, and we have developed that page using jsp and whcih i
-
I just purchased Apogee Duet 2 and am using it with Garageband 11. I am getting iTunes playbacks through the headphone monitors as per quick startup directions. When I open Garageband I get the same identical stack of guitar and on pedal displayed.
-
Query Designer on Netweaver 2004s ABAP Sneak Preview
Hello Folks, I have installed the ABAP sneakpreview, and have activated the BW on client 001. Most things work well, but i am having problems with starting the Query Designer. I logon to the query designer, but nothing starts up. In SM50 i see a lot