DM 6 -Impossible to configure Organizer Sync

First time poster - Long time BB and DM user.
As usual, BB Desktop manager is a second rate sync tool.  I just installed DM 6.x on a XP running PC and was "successful" installing it.
The issue - and just a little one - I cannot "configure" the Organizer to sync with outlook.  I have tried several times using the configuration wizard and every time i check a box (Address, memo etc) it takes me through the steps and when I click finish, it congratulates me, then flashes and clears the checked box that I selected at the start of the process.  When I click Sync- it informs me that there are no boxes clicked.  no matter how many times I run through the process - there is no progress.
Help - I need to get this working as I need to update my outlook with the data on my BB asap.

Hey george,
Welcome to the BlackBerry Support Community Forums.
This issue may be cause by an issue with your Intellisync folder, complete the following steps this may help resolve your issue:
1. Close Desktop Software 6.0.
2. Delete the Intellisync folder from c:\documents and
settings\<username>\application data\research in motion 
3. Open Desktop Software 6.0 attempt to reconfigure synchronization
options.
If you have any questions let me know
Cheers!
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

  • Impossible to configure the sync settings in Android (Google Nexus 7)

    Hi! Impossible to configure the sync settings in Android (Google Nexus 7). Synchronization can only enable or disable. And you can not set up synchronization in detail.

    You are using an external C-series as both a local and external spam  quarantine? Interesting, I didn't think that was still supported but I  will assume that it will still work and answer the cluster issues.
    You can configure an external spam quarantine at the  cluster level but local spam quarantines are locked down to machine  level. Since you don't want all machines to have the same setting it  doesn't make sense to define quarantines at the cluster level. Stick  with configuring quarantines at the machine level to reduce complexity.  Your description of the existing config is already a bit circular.
    You configure the reference for accessing a quarantine  at the Network -> IP Interfaces screen. if you want to point one box  to the other that's where you would do it.
    It's not clear that you actually got the  boxes out of sync but I would break the cluster and re-form it, keeping  in mind cluster config items on appliances after the first get  overwritten, but that's what you want.
    Since spam  quarantine settings are not normally changed very often, setting them at  the machine level should only be a on-time job.

  • On two computers installed Desktop 7 and Lotus Notes crashed when I performed Organizer sync.

    I upgraded to Desktop 7 on two very different computers.  In both cases after following the prompts Lotus Notes crashed when I performed an organization sync.   I sync calendar, memo and tasks 2 way and use defualts.  Went back to (uninstalled 7)  Desktop 6.1.0.36 and everything works fine  now.   We use Lotus Notes client 7.0.2
    This is one of the most important features so it must work flawlessly.   I use usb to sync.   This is Windows XP 64 bit.  I have another computer with same problem that is Windows XP 32 bit that use bluetooth to sync.
    The Desktop Manager does not crash.   Even if Lotus Notes Client is not running, while doing a sync I get  display indicating that Lotus Notes crashed.   It says it is sending diagnostic information to the admin but it stays there for hours and closer examination indicates no cpu cycles are being used.   (SysInternals process explorer used to debug stuck threads - I am a software developer.)

    That doesn't make sense, I used to go back and forth between my two computers and transfer music from each to my ipod. It was never a problem. Now with Itunes 7, it will not let me. Plus, I used to be able to drag playlists into the ipod and then the songs would transfer. Now when I drag up the playlists it won't let me drop them into the ipod. So . . . it can't be impossible to put music from two computers onto one ipod.

  • No organizer sync after DM 6 update (no error message)

    Hi there,
    After updating to DM 6 and, at the same time, updating the device software to v5.0.0.1036, I am not able to perform or configure organizer synchronisation any longer. When pressing the "Sync" button, it just says "Select your organizer data". When I try to configure the settings for the sync, a pop up window shows up saying "Operation is in progress, please wait" but it closes within a second or two with no error message - nothing happens.
    I am not going to go into how annoying this is and that RIM obviously released a sub-optimal update. Others did that already sufficiently. Let's just try to solve it.
    I checked the file "desktop.log" and you can find an error message there that might be the key to a solution.
    11:53:58.375|ERROR|1|Rim.Desktop.DesktopChannelWrapper|0|Error retrieving sync config file
    System.ArgumentException: The URL cannot be empty.
    Parameter name: url
       at System.Xml.XmlTextReaderImpl..ctor(String url, XmlNameTable nt)
       at System.Xml.XmlTextReader..ctor(String url, XmlNameTable nt)
       at System.Xml.XmlDocument.Load(String filename)
    I did not find anything helpful on the net on that error message so hopefully someone here in the Forum can help me.
    Thanks for any support in advance. 

    Hi and Welcome to the Forums!
    You might try advanced logging to see if anything more helpful shows up:
    KB01451How to turn on advanced synchronization logging if a wired synchronization fails
    This next suggestion is much more tedious, but it's a complete clean startover with the Desktop Software...if you wish to follow it, then I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything.
    1) Remove your device OS update package from your PC (add/remove programs)
    2) Cleanly uninstall the RIM DTM software:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    Some have reported that there are more registry keys to remove than are discussed in that KB...be sure to search your registry for any related to RIM
    Others have reported the use of a registry cleansing tool to also be helpful
    Still others have reported the use of your original PIM (e.g., Outlook, NOTES, etc.) installation CD, running the "repair" process, to be helpful in some situations
    3) Get a fresh download of the RIM DTM software:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchronizing via USB):
    KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
    4) Download (to your PC) a fresh copy of your device OS package from your carrier:
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    5) Install DTM to your PC
    6) Install (also to your PC), the device OS package
    7) Start the organizer configuration over:
    KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
    Hopefully that will get things going again.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • View Organizer Sync Log File

    when i am trying " Configure sync logging options"
    In that i am unable to open view organizer sync log file.
    it gives me message
    AdobeReader could not open "Synclog.html" because it is either not a supported file or because the file has been damaged
    Can anyone please help me to solve this problem

    Hey,
    hav u uninstalld nokia pc suite frm ur PC?
    If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

  • Organizer Sync

    I would like to use my Bold 9900 without the mobile service as a as a music, storage and organizing device. 
    For the organizer, I want to synchronize my Outlook calendar, contacts, memos and tasks with it.
    I have disabled wireless sync on my Bold and turned wireless off.
    When I go to the Desktop software under Organizer, it will no allow me to configure the sync (the Configure link is disabled).
    It says "(not available)" in front of the Contacts, Tasks, Memos and Calendar, and will not allow me to select any of them by clicking on the check box next to it.
    Not sure what the problem is. Help!!

    Hi and Welcome to the Community!
    Please check this for version compatibility:
    KB12268Synchronization support for BlackBerry Desktop Software for Windows
    If you need older versions of the Desktop Software, you can get them here:
    http://www.blackberryos.com/downloads.php?do=cat&id=110
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Error while configuring AAD Sync

    Hello Experts,
    I have one of my customer encountered with issue while configuring AAD Sync tool.
    Below is the error message 
    "An error occured executing Configure AAD Sync task:unable to establish a connection to the authentication service"
    Appreciate if any one could help in resolving the above error.
    Thanks everyone.

    Hello,
    Can you give us more information, a log file for example?
    The username/password that you use work?
    Florent

  • After updating my iPhone 4 to iOS 5, I can see it in iTunes in the source list, but after selecting it, there is no summary or anything to configure my sync options. I just see 'iPhone' written. What can I do to fix this?

    I just updated my iPhone and my iPad to iOS 5.
    Restoring the backup just worked fine as well as syncing the music and videos, but my Apps weren't synced at all.
    With my iPhone I got it done, after I installed some of my apps using the cloud and suddenly the all were installed during the next sync with my iTunes. All the stored data of my apps were on the iPhone, so I didn't loose anything.
    But with my iPad, this didn't work as well. I seem to have to install all apps by my self from the cloud.
    But my major problem is, that when I connect my devices to my Mac Book Air, they are shown in the source list, but except for showing 'iPhone' or 'iPad' I see nothing. I can't configure any sync options, so I am not able to do change or do anything.
    When updated to iOS 5 I used to restore the backup from before updating my iPhone/iPad in iTunes.
    Thanks for your help.
    Best regards,
    Rene
    Germany

    You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera, particularly before any update or restore.
    You should also be syncing your contacts to your computer regularly.  They hsould be in whatever program/service that you have selected to sync.
    If you have failed to do this, then they are very likely gone.
    You can try restoring from backup.

  • Set Up CTS+:  Webdynpro CTS_BROWSER - configure Organizer client in TMS

    Hi all,
    I'm trying to set up the CTS+ in a Portal Enviroment.
    This is my landscape:
    SID  System Role
    C1X  ABAP + Java Stacks (CTS+ System and Trasport Domain Controller) with SPS15 (ABAP and JAVA)
    JD1  Java Stack (EP Java Development System) Stack SPS14
    JD2  Java Stack (EP Java Production System) Stack SPS14
    I'm following step by step all points of Set Up and Use CTS+ in a Portal Enviroment Guide (May 2008).
    In STMS (C1X) I add JD1 and JD2 System as Non-ABAP-System.
    JD1 is the Java Source system and when I create it I set the flag "Activate Trasport Organizer" for C1X system
    JD2 is the Java Target system and when I create it I set the flag "Activate Deployment Service" for method SDM
    Then I create the new trasport layer ZJAD and the new trasport route from JD1 to JD2.
    When I configure the trasport organizer Web UI and try to test the Web service CTS_BROWSER from SICF I received this message:
    System C1X is not valid; configure Organizer client in TMS
    Any IDEA??
    Could you please help me?
    Thanks
    Moreno

    Hi, I have the same issue here.
    I think that is "normal" because SICF tries to run this in the name of you C1X system. This however must be running in e.g. the name of the development system.
    e.g
    http://hostname:8047/sap/bc/webdynpro/sap/cts_browser?SYSID=<PORTALDEVELPOMENT_SID>&PURPOSE=EP&sap-client=000&sap-language=EN
    Thanks!
    Edited by: BearCheese on Jul 9, 2008 10:05 AM

  • How configure password sync connector in OIM cluster environmet

    Hi,
    i want some inputs to configure password sync connector in OIM cluster environmet.
    Thanks,

    Use a load balanced URL.
    -Kevin

  • Link shutting down when trying to configure contact sync

    Just recently, every time I go to "configure" the sync between by Q10 and my computer, I get a message "Blackberry Link has stopped working"; folowed by "microsort is trying ..."; followed by "Blackberry  Link has stopped working"
    I uninstalled and reinstalled Link to no avail.
    Anu suggetstions?

    I'm having the same problem, Not sure what the reason is really...

  • The question about configuration Organization Unit on spro

    Dear all.
    I want to configuration Organization Unit on spro so I have created O.Units, Jobs and positions on Personnel Administration->Organizational Assignment->Organizational Plan  but I can't see these values about O.Unit, job and position on  SAP Access Easy .
    How to see these values on  SAP Access Easy ?
    Can I input these values about O.Units, Jobs and positions on spro ?
    Thanks so much.
    Huyen Nguyen

    instead of that
    Define the Number ranges
    in OOCR
    for all the objects
    Make a Template for Objects and Object Id
    and upload the same thru PP01
    than all the enties will sit in the SPRO
    >note it is not mandatory to create thru SRPO wht in case if u have 4000 to 5000  Employees
    So the best way is upload the Data thru LSMW thru Proper objects and Relatioships

  • Cannot configure home sync

    I have a couple of portable machines on which users with mobile accounts are installed. On some of the machines I see that I cannot configure home sync. The button in the system preferences:Accounts is dimmed all the time.
    TIA,
    Eckart
    div   Mac OS X (10.4.8)  

    Here's what I did.
    In workgroup manager you configure the Mobility Preferences for the particular User. Then you must also create a computer list for the portable machines which will be using PHD and set their mobility preferences to allow PHD syncing and check "Merge with user's settings".
    That's what I did and it works. Hopefully that's the way it is supposed to be done.

  • File is open in Elements Organizer Sync Agent10.0

    I have a catalog that is tied to Elements Organizer Sync Agent 10.0.  This causes thumb.5 cache to give an error process tied to another process when I try to do anything with this file.  I want to sync my catalog files to a second external hard drive..  I want to remove this .

    It’s normally for sharing albums or automatic back-up. Are you using on-line sync at photoshop.com?
    The simple and quick fix is right-clicking on that little Safe icon in the system tray (near the system clock) and choose Stop Backup/Synchronization.
    Or open the Organizer and click Edit >> Preferences >> Backup/Synchronization
    Make sure synch is switched off.

  • Impossible de configurer ma boite mail de free avec ipad

    impossible de configurer ma boite mail de Free.fr avec mon ipad

    "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
    "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
    Menu differences: [http://kb.mozillazine.org/Menu_differences Windows: Tools > Options - Mac: Firefox > Preferences - Linux: Edit > Preferences]

Maybe you are looking for