DM Does Not List the .pst I am using
I recently purchased a BB Curve 8330 and installed the DM software. Since that time I have changed my MS Outlook set up and now am using a new .pst. The contact data in the device is from the old .pst and is not correct. I want to erase all data in the device and use a .pst that does not show up on the drop down menu to re sync. Any ideas on how to accomplish this?
breambuster
pwillener wrote:
This error is caused by a Windows Update. If the latest update from earlier this week does not fix it, uninstall all updates that were installed at the beginning of this month ("Patch Tuesday" 2014/08/12).
Sorry, my reply was actually intended for another post. Your issue has nothing to do with Windows Update; my apologies!
The issue is likely what Gilad posted, or http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html
Similar Messages
-
Windows control panel routine to designate Elements 12 as my default editor does not list the program. It loaded OK and accepted the key. Your regular help line could not help. What to do?
Hi Robbie,
The editor program is NOT under the organizer path as you mentioned in your last message. The actual editor program is at the location I gave in message #1 i.e. as follows
"C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
The one under the organizer is actually the Welcome screen which you have probably set up to go directly to the editor.
If you go to the Open With screen I showed in message #3 and browse to the actual editor as given above, it should show up in your list.
If it doesn't, then Windows is playing up again - and we have to take extra steps.
Brian -
hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
the error message it shows is
******************************** ERROR ****************************************
* The version of gcc in the path does not match the version of gcc used to *
* compile the currently running kernel. This can cause unpredictable *
* behavior in kernel drivers and should be fixed. *
* gcc version: Linux) *
* kernel compiled with: 4.3.2 *
******************************** ERROR ****************************************
my kernel source version is
linux-8nes:/home/admin # rpm -qi kernel-source
Name : kernel-source Relocations: /usr/src
Version : 2.6.27.29 Vendor: openSUSE
Release : 0.1.1 Build Date: Sun 16 Aug 2009 03:43:52 PM IST
Install Date: Sat 24 Oct 2009 02:13:12 AM IST Build Host: rinck
Group : Development/Sources Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
Size : 309251954 License: GPL v2 only
Signature : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
Packager : http://bugs.opensuse.org
URL : http://www.kernel.org/
Summary : The Linux Kernel Sources
Description :
Linux kernel sources with many fixes and improvements.
Authors:
Linus Torvalds <[email protected]>
see /usr/src/linux/CREDITS for more details.
Source Timestamp: 2009-08-15 17:53:59 +0200
GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
GIT Branch: SLE11_BRANCH
Distribution: openSUSE 11.1
i had also installed GCC 4.3.2.
it shows the error message as i had posted.
please kindly help me on this.
Thanks and regards,
P.karthickCheck this solution
-
Yum list-security does not list the info
Hi,
we am using oel5 and 4. we have setup yum repositoires (up2date from ULN) and all the clients are connfigure to these repositories.
i am trying to put up a cyclic patch managment system for these servers. what i have in mind is query the repositorie for updates(yum check-update),
figure out the Security BUG and CVE packages and based on thier severity choose packages and update them.
to get the security output or bug info i use `yum list-security`, but currently it does not give any ouput. i did some googling and found probably because my repodata does not contain updateinfo.xml. I am not able to figure out how this updateinfo.xml can be downloaded/created.
Please do help ....
BennoThe Oracle ULN up2date facility does not support yum groups, so the list-security information is simply not available. A better approach (in actual terms, not that it is a better idea) would be to parse the errata mail-outs for which you can register at http://linux.oracle.com and extract the info from them.
Yum groups are available via the http://public-yum.oracle.com site, but that information is static, updated only on major releases. -
?The voice over button does not work per directions (press once for title/artist; press twice for battery status. Any ideas how to make this work?
I discovered that if I push the button quickly (twice), I get the battery status. But I still do not have any title artist data. The music get quieter but no info.
-
SQL Developer Quick Migration wizard does not list the connections
Hi,
I have downloaded SQL Developer 2.1 and installed it in a different folder with the option to import connection definitions from the previous version (1.5). However, when using [Quick Migration], the connections do not appear in the dropdown. Even if a new one is created...
Does anyone know if there is a workaround ?....
Thank you.Hi Boris,
I see the confusion.
SQL Developer "Migration" features relate to non Oracle databases, like Sybase, Microsoft SQL Server, DB2, ...
So Quick Migrate allows you to choose a non Oracle database (connection) to migrate to Oracle.
Moving from Oracle 10g to Oracle 11g is really a Upgrade, although sometimes the word migration is used to confuse everyone :)
If you a upgrading an Oracle Application to Oracle 11g then there would be a specific process, check otn for this.
If you are upgrading your own Oracle database to Oracle 11g, then there are a number of ways.
http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/toc.htm
http://kubilaykara.blogspot.com/2008/02/upgrade-oracle-10g-database-to-oracle.html
SQL Developer itself has a Database Copy and Database Export.
Have a read of the doc to see which one suits.
Regards,
Dermot.
SQL Developer Team -
I have a used ipad ,set back to factory settings. I open the app store, it connects and brings up the headers but there is no list of apps. Please advise.
Hey Jackysmack, any luck? I have the same exact issue. Have you got your app store to work yet? If so any tips I can try. Thanks
-
This is my first time using this so please be patient.
the link below contains the driver for your printer from the brother support page and how to install it on mac
http://welcome.solutions.brother.com/bsc/public/as/as_ot/en/dlf/dlf/000000/00440 0/dlf004497.html?reg=as&dlid=dlf004497&dispforlist=1&os=26&type2=1&prod=mfcj220_ all&c=as_ot&lang=en&flang=4 -
Spell checker does not recognise the language I'm using
Hi, I have enabled the spell checker with a couple of dictionaries installed.
I use both languages on a regular basis.
Is there a way to let the spell checker guess which language I am using automatically?
currently every time I switch to another language I have to manually select the language from the list, which is quite annoying..
thanks
MichaelThe Dictionary Switcher extension should be able to do what you want - https://addons.mozilla.org/firefox/addon/dictionary-switcher
-
I have a iMac G5 with Mac OS X Version 10.3.9
Firefox 2.0.0.20 is the last release that runs on Mac OS X 10.2 and 10.3<br />
Firefox 3.0 and 3.5/6 versions require at least Mac OS X 10.4
*http://www.mozilla.com/firefox/system-requirements.html - Firefox 3.6 System Requirements
See:
* http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
* http://kb.mozillazine.org/Unsupported_operating_systems
Mac: https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/ -
IN BW UCCHECK transaction for Unicode does not list Transfer/Update rules
Hi All,
We are going to update our BW system to install Enhancement Package 1 SP 7 on our BW 7.0 and we are going also to convert our data base to Unicode.
We used the UCCKECK Transaction to have a list of the abap programs to be modified before the u201Cconversionu201D procedure.
But the transaction does not list the abap code included into transfer rules, update rules and start routines.
Have you an idea to recover them?
And do you think the conversion procedure will abort if these kinds of routines are not adjusted or they will go in error at runtime?
Do you have experienced this problem?
Thanks a lot.
AntonellaHi Nils, sorry for delay in replyu2026
Unfortunately we started to develop our routines in BW2.0 and checking some of them we receive the error u201CIn Unicode programs, the "-" character cannot appear in names, as it does here in the name "W-DATE" u201Du2026
And further more in subsequent BW releases the same error is only a u201Cwarningu201D into a NON Unicode system.
So I think we should check and correct all our routines before the Unicode conversion.
My best regards, Antonella -
I have just installed Adobe Digital Edition on my computer. I closed it and then plugged in the new Nook HD and opened the Digital Edition back up - it does NOT list the Nook in the left side so I cannot move the book to the NOok....how do I get this recognized so it works. ?
Please have a look at the similar thread, Authorizing my nook. Hope the solution mentioned in this thread solves your problem.
-
Visa Resource name does not list anything
Hi,
I recently installed a Agilent 82357B GPIB and along with it I also installed Agilent IO 16.3. This GPIB is hooked up to a power supply. I am able to find and query the device in MAX and Agilent IO, but when I use the Visa Resource Name control in a VI, it does not list anything. Before I used to see LPT1 and COM1, but now even they have disappeared. All these are present in Device Manager. Even VISA interactive control throw an error. Attached are screenshots for some reference.
HP_GS
Attachments:
VisaResource-Refresh.png 2 KB
Visa-IC.png 7 KBHi there,
You might want to read this post about the specific error.
Also you need to make sure the right class is slected for the visa resource (right click):
Hope that helps, regards W -
Hp 15-r033tx laptop does not show the Nvidia chipset information and only uses Intel HD graphics
My Hp 15 r033tx laptop has windows 8 64 bit installed in it and as it comes with NVidia Ge Force 820 M 2GB graphics card , I have also installed Nvidia and Intel HD Graphic Drivers but in the dxdiag selection it does not list the Nvidia Chipset and information but only lists Intel HD Graphics with 1786 MB.
Also it does not show any Dedicated Video Ram that is normally showing in my other friends desktop with Nvidia Graphics properly installed
Any solutions?Hi @Suraj2410 ,
Thank you for your inquiry, I will do my best to help.
I see that you have Windows 8 installed and are not seeing your switchable graphics.
When I checked the specification page I see it came with Free Dos. When I checked for support drivers they are listed for Windows 7 and Windows 8.1.
HP 15-r033tx Notebook PC specifications
HP 15-r033tx Notebook PC Drivers
Here are three document to assist you with overcoming this difficulty.
Resolving Video and Graphics Issues
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
If you are still having difficulties, with it being a recent purchase, I suggest contacting HP support for assistance.
Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Captivate 3 does not detect the micro
Dear Users!
I have a lot of problems, using captivate 3 on my vista
installation. actually, the program does not detect the microphone.
i am using this micro in other applications without any problems. i
read this problem also exist in older versions of captivate. i am
using realtech audio hardware. i found a patch for captivate 2 that
does not work on captivate 3, but i found no pathch for captivate
3.
greetings from germany
Rene RoseHi Rene
It should be logical to assume that any patch that corrected
issues with version 2 would be automatically incorporated in
Captivate 3.
To my knowledge, your situation is one I've not seen or heard
of in Captivate 3. So I suspect possibly a mix of hardware that we
haven't seen before.
I would highly suggest you report this to Adobe as a
potential bug. Please provide them as much detail as you can. You
do this using the Wish Form.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick
Maybe you are looking for
-
I used to be able to click on history and it would show what websites I've been on and the date visited. That doesn't work all of a sudden and wonder, how do I restore that function?
-
Problem with bar cfchart, yaxistitle distorts mouseover text
I am having a problem with cfchart bar charts, have searched but not found a solution. If I specify any value for yaxistitle, it distorts the text that appears when you mouseover. If I don't specify yaxistitle, the text in the mouseover "bubble" look
-
I have recently bought a MacBook Pro, and downloaded my windows version of PSCS3 in Windows and am accessing it via Windows direscly or via paralells, BUT PS does not download my CR2 files, only the jpegs from my Canon 20D. PLease can someone help. T
-
Can the trial version with everything installed create mysites and other applications?
Hello Community IF you have WS2012 and you install Sharepoint 2013 Server Stand-Alone used for trial environments and it installs all components can you create Yammer, MySites, User Profiles, etc? Thank you Shabeaut
-
Where to get X-fi I/O drive
Hi, I just purchased a X-fi Xtrememusic and now having problem using my front headphone/mic input jacks. I am a heavy internet phone users and now its really a hassle to always go behing the pc and hook up my headset and mic. So, I went down to all o