DM1 list of problems after 1 year - bad network adapter, touchpad, and headphone jack

I have a HP Pavilion DM1-3020 US laptop with Windows 7 64 bit Home Premium, 3 GB RAM.
After completing a factory re-install, I still have the following issues, after purchasing this computer only a year ago:
1) The network adapter simply stopped working, not sure if it shorted out or what. The wifi works, but the computer cannot detect or connect to an ethernet cable
2) The touchpad went off randomly and comes back on randomly. There is an orange light that indicates when it is off.
3) If i plug in headphones, music still plays through the speakers as though it doesn't know there are headphones, or it comes in and out between the speakers/headphones.
This computer seems to be plagued with issues, and I would like the above issues addressed, and the computer fixed or replaced.

If you do not have a warranty with HP, they will not do anything for you unfortunately.
This is a user to user forum, contact HP directly if you feel they can do something for you, sorry about your troubles.

Similar Messages

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above.

My thorough list of problems after updating to iTunes 7

I've been reading the topics around. Some of these problems below seem to be sort of common, with slight differences in my case. Some others I couldn't figure out whether anyone else has experienced them.
First of all, unlike in a lot of the topics that I've read around, I didn't have any problems installing iTunes 7 (although the problems started right after I turned it on for the first time...). Nor did I have any problems updating the software on my iPod to version 1.2, which I have to say, unlike iTunes 7, seems to be very nice, particularly on the new detail of searching the long lists of songs/artists/albums alphabetically.
1) The least serious of the bugs on iTunes already used to happen to me with the previous version 6. Occasionaly, when I plug in my iPod to the computer, iTunes doesn't recognize it properly. Instead of the 5th generation video, it shows up on iTunes as a previous generation iPod without video. What happens then is that iTunes screws up the whole artwork settings on the iPod. It starts off by switching off the artwork visualization option on my iPod, the next time it correctly recognizes it as the 60 G video model. And when I turn the option back on, as it should always have stayed, iTunes proceeds to reorganize the whole artwork list on the iPod, by first deleting it completely and then optimizing it. When one has the iPod with more than 20 G full of albums (let alone when it's 60 G are completely full...), this is something that already takes a lot of time and becomes irritating, taking into account that it happens sort of randomly: you plug in the iPod and pray that iTunes recognizes it properly. It used to happen to me quite frequently with iTunes 6, and I thought it would be fixed with the new version 7. But it hasn't: yesterday it already happened to me again, once, after I plugged/unplugged it some 10-15 times. The frequency of the ocurrence of the problem, at least, seems to have decreased, when compared to iTunes 6.
2) As opposed to the previous problem, the most serious happend to me right after I started iTunes 7 for the very first time, with the iPod plugged in. Like it has already been reported by several particpants in this forum, it started doing the infamous gapless analysis on my BIG iPod song library and it froze after a while, finally crashing with the usual message "Do you want to send a report to Microsoft". Up to this point, this seems to be common with a lot of users of the new version 7. With me, it went farther. I was the one that froze right afterwards: when I started iTunes again, I realized that in the process of freezing/crashing/restarting iTunes had switched off my manual update option on the iPod, instantaneously erasing about 5000 songs that I had loaded in it. The problem is that I didn't have enough space on my computer hard-disk to hold those 25 G of music, so I only kept them on the iPod whereas my iTunes music library was essentially empty. And there I am now, importing every single one of my CDs back into iTunes and to the iPod, something that will take me another couple of weeks at least.
3) Taking into account the previous point, I am essentially using iTunes 7 now from the start with an empty library, importing every CD back from scratch, as if this was my first encounter with iTunes and iPod. I cannot see then what it could have done to an already existing music library on the computer (other than completely erasing the one that I had on the iPod), like some damage that also I read happened to some people. With the CDs being imported all over again with iTunes 7, it no longer does any gapless analysis of anything, because there are no songs imported with previous iTunes versions to be analyzed. The sound is also fine: I don't get any of the static or garbled noises that I read were also troubling a lot of people.
4) As for the crossfading/gapless discussion, after experimenting with those (now infamous) two options for a while, I got to the conclusion that there's really no point at all in having them, even when they work well... let alone the serious problems that their introduction on iTunes 7 has been causing. By turning the crossfading option on, I can see that iTunes merges the end of one song with the beginning of the following one, with time lengths depending on the slider position chosen by the user in the corresponding option's window. But it's something that I personally dislike a lot, to have both songs sort of being played on top of each other, during their transition. So I switched it off. On the other hand, the gapless playback seemed to be a nice welcome. It is true that, until this version 7 came up, on certain albums, like in the classical "Sgt. Pepper's Lonley Hearts Club Band" (that supposedly first started that concept) or a lot of the Pink Floyd ones, where the songs are almost continuous without any pauses between them, both iTunes and the iPod used to force an inconvenient pause between the songs. I then imagined that this gapless option would at least improve on that. But what I've figured out by now, after using iTunes 7 for three days, is that if the original albums don't have any pauses between songs, iTunes 7 now imports those albums exactly as they are, without any pauses either, even if both the crossfading and the gapless option are switched off. In other words, after importing my "Sgt. Pepper's" and "Dark Side of the Moon" CDs again with iTunes 7, I no longer get forced pauses between the songs like I used to get before, either on iTunes, or in the iPod. This, even though I make sure that those two options are switched off. The gapless playback seems then to be sort of automatic now on iTunes 7, as it should, if that's the way the original imported album is also recorded. And this troublesome gapless option seems then to be a completely useless thing, unless the idea is to fix songs imported with previous iTunes versions, or to force gapless playing on albums that originally have pauses.
5) As many people have noted already, the "Drag and drop" album artwork window only works for single songs. If one wants to cut and paste the artwork into that window for several selected songs or a whole album at once, like it could be done on iTunes 6, that's not working now. One has to select all the songs and then, with the right mouse button, choose the info window to paste the artwork into the small box there.
6) Finally, when the iPod is plugged to the computer, some viewing configurations on iTunes are not being memorized either. For example, I always turn the browser option on (Ctrl+B), so that I can see the artists and albums lists, on top of the complete song list. But everytime I plug the iPod back on, that option is switched off. For the main iTunes music library it's OK: I've only needed to do it once, and now that viweing configuration has been there forever, everytime I start iTunes. But whenever I plug the iPod and click on its music library, I then need to press Ctrl+B every time, because iTunes doesn't seem to keep that viewing option switched on from the previous time the iPod was plugged. Again, this is something that worked fine with iTunes 6.
Conclusion: there are indeed a lot of bugs to be fixed with this new version of iTunes, some of them highly damaging to the saved libraries. IF YOU STILL HAVEN'T UPDATED TO VERSION 7, DON'T DO IT YET. WAIT A FEW WEEKS UNTIL APPLE FIXES ALL THIS.
Windows XP Pro Pentium 4, 2.4 GHz, iPod Video 60 G

Upgrading to itunes 7.0 just cost me 2 days of messing around and in the end I had to revert back to v6.0 and resore my lib.
Apple CS was good but did not belly up the fact that 7.0 is defective in some cases and in the end told me I had a hardware problem!
The main issue is that I could not get itunes 7.0 to see my ipod (very infrequently after a hard boot I would see it but would not be able to upload anything). Worked(s) 100% with v 6.0.
This is very defintey 1/2 baked following in the steps of the other well known producers of sw that is not always functional/buggy the first time around.
My computer is a x40 IBM laptop with xp sp2. Will have to wait a few more weeks to see how this pans out.
IBM X40 Windows XP

New video problems after replacing bad cap

We are attempting to repair our first gen IMac G5 after it started having a problem with randomly shutting down. After much online research, and everything pointing towards bad capacitors, we opened up the machine and sure enough there was a bulging cap. We did the LED tests as well (fine), and ran hardware test (which also pointed to a problem on the logic board). After ringing the local Apple tech and confirming that they would only replace the whole board, not individual capacitors, we found a repair shop locally that was willing to solder on a new cap for us.
So we've put the whole machine back together today, and again the LEDs light fine. However, now, the video is totally messed up! It starts up as far as the login screen but it'd be impossible to log in as the screen is so badly scrambled.
Now we're trying to decide what the culprit is--incorrect reassembly? Accidental damage to the video cable during disassembly/assembly? Static electricity zapped the board at some point? Replacement cap not good enough (it's got a much higher uF and voltage rating but that seems to not be critical)?
Any pointers on how to proceed? We're loathe to throw in the towel just yet!

Don't throw in the towel, take it back to your local tech and have her replace the cap with one of the proper rating.

Sound Problems After Restore from Hibernate Using uswsusp and pm-utils

I see mention of using /etc/pm/config.d/module to recycle certain kernel modules during suspend. Do I need to suspend all modules?
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: CS4206 Analog [CS4206 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 1: CS4206 Digital [CS4206 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
[aj@mbp62 ~]$ lsmod | grep snd
snd_hda_codec_cirrus 8790 1
snd_hda_intel 36904 1
snd_hda_codec 149633 2 snd_hda_intel,snd_hda_codec_cirrus
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77709 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59173 8 snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel,snd_hda_codec_cirrus
soundcore 5450 1 snd
[aj@mbp62 ~]$ cat /etc/pm/config.d/module
SUSPEND_MODULES="bcma b43 snd_hda_intel"
SLEEP_MODULE=uswsusp
Any pointers?

This morning, I rebooted for half an hour without success:
After resume from hibernate, most of my machine froze like described above.
After first reboot, it worked for 1 minute, then I had a full freeze (nothing worked... no mouse, no normal keys, no magic keys, screen frozen...)
After second reboot, my wifi adapter was gone. It showed up in lspci and looked like this:
04:07.0 Network controller: Atheros Communications Inc. AR5416 Wireless Network Adapter [AR5008 802.11(a)bgn] (rev 01)
Subsystem: Atheros Communications Inc. Device 3071
Flags: 66MHz, medium devsel, IRQ 22
Memory at feb70000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] #80 [0000]
...but not in ifconfig. I found the following in dmesg:
[ 7.106070] ath: phy0: address test failed addr: 0x00008000 - wr:0x00080008 != rd:0x00000008
[ 7.106181] ath: phy0: Unable to initialize hardware; initialization status: -19
[ 7.106287] ath9k 0000:04:07.0: Failed to initialize device
Problem persisted over 10 poweroffs/reboots (also hit the "on" button a few times with the pwoer cable disconnected, trying to make it "reset" or something. Did not help this time, might have been coincidence the last time that worked.

Hold Button and Headphone Jack problems (not a question, DO NOT ANSWER)

I received an old iPod with color display when the hold button appeared to be locked. The previous owner gave it to me for free. I waited about 3 years and finally looked into actually opening and fixing it. It turns out that a small ribbon cable connects the headphone jack and hold switch to the motherboard. The cable simply came out of its jack on the motherboard. All that was needed to fix the problem was simply opening the iPod and reconnecting the cable. For information on how to open your iPod's case check this link:
http://www.youtube.com/watch?v=g21_JdLtJW8
The blue tool pictured is not necessary. A few flathead precision screwdrivers work perfectly. Try it and good luck!

P.S.
The hold button was constantly locked and had no control.

Problem after Implementing BADI

Hi all,
I implemented BADI MB_MIGO_BADI it was working fine, but it was deleted
and again trying to implement second time it is showing the message
Implementation ZTEST_MIGO migrated (see long
for instructions) and choose enhancement spot and i implemented the BADI but
this time it is not triggering.
what might be the problem any help?
Thanks
Satish.

Dear Satish,
Once u implement a BADI in ECC it will automatically generates the Enchament Spot. Here u deleted ur BADI implementation. Ur BADI got deleted and the enhancement for tht not get deleted. Thts y its showing error when u r creating the second time. So implement ur badi inside the Enhancement Spot using SE19.
With Regards,
Sumodh.P

Problems After Yearly Creative Cloud Membership Renewed

After my Creative Cloud membership renewed last week I have been unable to access the Adobe Software that is part of the Creative Cloud. The last message box I received asked for a serial number. How can I get that information so that I can againuse the software? I thought my membership automatically renewing meant my usage of Adobe products would not be interrupted.

Did you pay for your renewal, and does that show on your Adobe account page?
https://www.adobe.com/account.html for serial numbers or orders on your Adobe page

Problem after system update (base installed only) and other concern

I have had two strange problems upon updating from Arch using pacman.
1) My keyboard is no longer detected
2) The BIOS time seems to be eight hours behind. (Setting the clock to UTC from another distro sets the clock right since my time zone is GMT-8)
Does anyone have a work around?
Btw, here is rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="/usr/share/zoneinfo/America/Los_Angeles"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="myhost"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#gateway="default gw 192.168.0.1"
#ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond)
# End of file
I commented gateway="" and ROUTES="" since I am using dhcp.
I also have a concern about the latest kernel.
I decided to install and build the latest kernel (from a chrooted environment) and noticed that I got a kernel panic (upon trying to boot into arch) no matter what I did (about it not being able to mount the root filesystem from /dev/sdb2). I could enable old pciix support, but I got annoyed by the clock skew outputs when building. How are devices, particularly SATA drives, named and accessed now?
[edit]By the way, I have two separate kernel booting for Arch. Here's is my grub config for those
title Arch Linux
root (hd1,1)
kernel (hd1,1)/boot/vmlinux-2.6.16.arch root=/dev/sdb2
initrd (hd1,1)/boot/initrd26.img
title Arch Linux (modified kernel)
root (hd1,1)
kernel (hd1,1)/boot/vmlinuz-2.6.20 root=/dev/sdb2
Last edited by NoOneImportant (2007-02-13 23:16:22)

zeus wrote:
1) USB or PCI?
2) TIMEZONE="America/Los_Angeles"
3) What preceded a panic?
Most likely the name of disks was replaced. Look in output.
try Fallback image/ try UUID in grub/fstab
1) USB
2)I just tried to boot into arch and no dice.
3)
Starting balanced_irq
Using IPI Shortcut mode
VFS: cannot open root device "sdb2" or unknown-block(0,0)
Time: tsc clocksource has been installed.
Please append a correct "root=" boot option
Kernel panic -not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Last edited by NoOneImportant (2007-02-13 23:31:22)

Hp laserjet cp1525nw will not sync to wireless after the Internet network is lost and returns

My hp laserjet cp1525nw works fine UNLESS the cable modem losses signal. At this point the blue light on the printer blinks. This continues after the signal comes back from my ISP. The only way to get the printer to work wirelessly again is to power cycle it. I have tried pushing the wireless button below the blue lite. My J6480 works fine.
Any ideas,

Hey there @FC111 , welcome to the HP Community
If you are running a Windows OS, you can try running the Print and Scan Doctor to potentially find your home network again and connect to it. If that does not work, try Uninstalling the Printer Software and reinstalling the printer.
I hope that helps, let me know the results and which OS you're running.
Happy Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problems with internet sharing/network connection/ethernet and XBOX 360

So basically I have a sent my Mac Book Pro 13" (Snow Leopard) away to be fixed, and in return I got a loan Mac Book Pro 15" (Lion). In the two weeks my Mac book was away getting fixed I purchased an XBOX 360, because of my location I am unable to use wireless on my XBOX, so instead I connect the loan Mac Book to the XBOX 360 via network cable.
This worked fine and I could now connect to XBOX Live and be on the Mac Book at the same time.
So today my Mac Book (13") is returned, I connect everything up exactly the same also changing the settings on internet sharing making sure that it can be used to send the connection to other devices via ethernet.
But it just wont connect.
The XBOX doesnt find the connection like it did before, and it also doesnt register on the MAC Book either.
I've tried different cables, the same cable I used where it worked before.
I've tried turning of Virus protection.
Both still at both ends it is not registering a connection, I have used this Mac Book before through a network cable so I dont think there is a problem there, to my knowledge everything is the same as I did on the other Mac Book but this one does work.
Have you any advice or tips on how to get this to work?
Thanks for your time.

What I did to get my network running again (although I still haven't found out why DHCP has stopped working):
1. Open the Control Panel of the computer that's trying to connect to the network (not the computer sharing the internet connection)
2. Go to 'Network' panel, and select the AirPort connection
3. Under the 'TCP/IP' tab, change 'Configure IPv4' pull-down menu from 'Using DHCP' to 'Manually'.
4. Enter an IP address between 10.0.2.2 and 10.0.2.256 (I randomly chose 10.0.2.40), a Subnet Mask of 255.255.255.0, and enter 10.0.2.1 in the Router box.
5. Click "Apply now"
The computer should now be connected to the network, and able to access the internet. If not, you may need to manually enter a DNS server - put '4.2.2.1' (or an IP for a DNS server provided by your ISP) into the 'DNS Servers' box.
You need to do that process for each computer you're trying to connect to the shared network, making sure you enter a different IP Address for each.

Problem after kernel updation Sun OS 8 and SAP 4.7

Hi...
I have updated kernel from 620 to 640 (patch 223).
Now after upgrading i am getting error as below while starting SAP.
ld.so.1: R3trans: fatal: libCstd.so.1: open failed: No such file or directory
Killed
I found that libCstd.so.1 is missing as--
bash-2.03# ldd R3trans
     libdl.so.1 =>      /usr/lib/64/libdl.so.1
     libnsl.so.1 =>      /usr/lib/64/libnsl.so.1
     libsocket.so.1 =>      /usr/lib/64/libsocket.so.1
     libCstd.so.1 =>      (file not found)
     libCrun.so.1 =>      /usr/lib/64/libCrun.so.1
     libm.so.1 =>      /usr/lib/64/libm.so.1
     libthread.so.1 =>      /usr/lib/64/libthread.so.1
     libw.so.1 =>      /usr/lib/64/libw.so.1
     libc.so.1 =>      /usr/lib/64/libc.so.1
     libmp.so.2 =>      /usr/lib/64/libmp.so.2
     /usr/platform/SUNW,Sun-Fire-280R/lib/sparcv9/libc_psr.so.1
Now problem is that how to get this librery and in which package. OS is Sun OS5.8 and SAP 4.7.
Regards,
Abhimanyu

Update SUNWlibC patches & SUNWlibCx patches and get the desired librery.
Regards,
Abhimanyu

Impossible problem after latest update of 10.5 and 10.6

Hi all,
I've an incredible problem that I'm not able to solve...:
after latest update of 10.5 (some days before SL) I noticed that mouse movement was very strange and every 10 seconds (about) the mouse acceleration speeds up and after 1 seconds turn normal. The problem repeat in infinite cycle. With 10.6 and 10.6.1 is the same.
I made also this test: I boot with Leopard DVD and tested the mouse movement on the install screen. The movement is ok but if I boot with Snow Leopard DVD the mouse movement on the install screen is wrong.
Then... this is not a problem of a software on my hard disk (my first suspect) but some difference on the driver of the mouse that on my iMac has this problem.
Someone can help me?
Thank you all

faabri
What kind of mouse are you using?
EDIT: I just saw your other post here . . .
You should include all the detail in your post here, so that
people can help you with as many facts as possible.
Message was edited by: ~Bee

Crs problem after rm -fr /etc/ora* fix and lastgasp files

newbie dba run this command our RAC NODE 2
rm -fr /etc/ora*
after this problem node2 CRS didnt work. so db instance didnt work too...
i copied /etc/ora* files from NODE1 to NODE2,
and replaced all rac1 with rac2, after reboot NODE 2.... CRS worked fine and db instance is working fine...
but ll lastgasp file names are the same with NODE1's,
node1 /etc/oracle/lastgasp
*==*
ag000852_kkrac1.lgl ag193150_kkrac1.lgl mo154244_kkrac1.lgl
ag001847_kkrac1.lgl ag214301_kkrac1.lgl mo171409_kkrac1.lgl
ag040319_kkrac1.lgl ag234646_kkrac1.lgl mo184502_kkrac1.lgl
ag152423_kkrac1.lgl mo000852_kkrac1.lgl mo193150_kkrac1.lgl
ag154038_kkrac1.lgl mo001847_kkrac1.lgl mo214301_kkrac1.lgl
ag154244_kkrac1.lgl mo040319_kkrac1.lgl mo234646_kkrac1.lgl
ag171409_kkrac1.lgl mo152423_kkrac1.lgl
ag184502_kkrac1.lgl mo154038_kkrac1.lgl
node2 /etc/oracle/lastgasp
*==*
ag000852_kkrac2.lgl ag193150_kkrac2.lgl mo154244_kkrac2.lgl
ag001847_kkrac2.lgl ag214301_kkrac2.lgl mo171409_kkrac2.lgl
ag040319_kkrac2.lgl ag234646_kkrac2.lgl mo184502_kkrac2.lgl
ag152423_kkrac2.lgl mo000852_kkrac2.lgl mo193150_kkrac2.lgl
ag154038_kkrac2.lgl mo001847_kkrac2.lgl mo214301_kkrac2.lgl
ag154244_kkrac2.lgl mo040319_kkrac2.lgl mo234646_kkrac2.lgl
ag171409_kkrac2.lgl mo152423_kkrac2.lgl
ag184502_kkrac2.lgl mo154038_kkrac2.lgl
what lastgasp files? how grid is using them?

I seem to have 8.1.7 creating a database with RH Linux 7.1 now. This was an important clue, since 7.1 hiccups 65% into the link phase of installation, thereby requiring the stubs patch to be run at that time, whereas 7.0 runs quite happily through the install & link without using the patch.
HOWEVER... before invoking dbassist to create the database under 7.1, you apparently need to export ASSUME_LD_LIBRARY = 2.2.5, etc., again, as you would do for the first time installing under RH 7.0.
null

Problems after software updates - iTunes, Sound, Clock and General

After applying the update to iTunes (7.6.2), it has almost exclusively crashed straight after start up, or after a few seconds of playback. Twice it's worked for a short period, but then crashed when I plugged my iPod in.
I get this in the Problem Report:
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000008
Ire-installed it to no avail.
A couple of days later I carried out most of the other updates, and ever since things are running slow. Everything down to the trackpad movement is sluggish, even choosing a user and entering my password falters and stalls. Sound seems to skip and struggles to be played if at all, and absurdly my clock is losing time, at a rate of about 50 minutes every hour.
Taking the battery out and holding down the power button temporarily(about 10 minutes) resolved the sluggishness, after which point it slowed back down.
These are all the software updates carried out over the last week:
+iTunes 7.6.2+
+Macbook EFI Firmware 1.1+
+iMovie 7.1.+
+Keynote 4.0.2+
+Number 1.0.2+
+iWeb 2.0.3+
+iPhoto 7.1.2+
+Keyboard Firmware 1.0+
+AirPort Utility 5.3.1+
+Front Row 2.1.3+
+Digital Camera RAW Compatibility+
+iPhoto 7.1.3+
+Leopard Graphics 1.0+
+Time Machine and AirPort 1.0+
+Keynote 4.0.3+
+Security 2008-002 1.1+
+Safari 3.1+
I'd be very grateful for any help or pointers as to what may have cause the problems, and how I might go about rectifying them.
Message was edited by: statusfrustration

i have the same problem. my battery drains after an NSU update of my nokia 5800 to v50. do i need to reupdate?

DM1 list of problems after 1 year - bad network adapter, touchpad, and headphone jack

Similar Messages

Maybe you are looking for