DM4-3055DX DVD-Dual Layer Burner

I have a DM4-3055DX notebook
i wanted to burn some home movies and i purchased DVD-R DL - Dual layer DVD to increase the capacity of the DVD to 240minutes or 8.5 gb
my question is how do i know or find out if my notebook has a DVD-Dual Layer Burner. or supported Dual Layer DVD-Rs
thank you

Try this free Nero info tool
http://www.softpedia.com/get/CD-DVD-Tools/CD-DVD-Rip-Other-Tools/Nero-InfoTool.shtml

Similar Messages

Dual Layer Burning In DVD Studio Pro 3

I am working on a 2 plus hour project. If I want it to fit on a standard 4.7 GB Disc I will most likely have to compress it a great deal. I have a dual layer burner and media. Is there a switch or setting I can use to simply burn to dual layer? The video is over 2 hours and I want 3 audio tracks and some special features. Burning to dual layer would allow me not to compromise any quality etc. Thanks.

Is there a switch or setting I can use to simply burn to dual layer?
Yes. You just select the disc type (in the normal way). What is trickier is setting a suitable layer break-point. You either have to make sure that you do have chapter marker(s) at a suitable place, or - if your material is made up of short elements - 'balance' them between the two layers.

DVD Dual Layer Not Working?

Hi all!
This is my first time to these forums and I have some trouble with a used Toshiba x205-SLI1 I just bought. the HD Dual Layer burning does not function and the driver appears to be updated properly. It is a TS L802a model, with drivers dated as of 6/21/2006 version # 6.0.6002.18005.
When I insert the Memorex HD +R Media Nero 9 runs up and begins the process but only goes to about 1% then stops. It ejects the DVD which apears to have nothing written to it by looks since I can put the DVD back in and there are no written areas all i can see with data.
Plus the speed of the drive only reaches 2.4 when the max is 8X.
Is there a newer driver somewhere? I need to get this working if possible and without spending tons of money on different media types to "test" the Burner.
Does this burner have some inate problems as i have read on other forums in burning dual layer dvd's?
oh, and it does work with the normal 4.7GB DVD's just fine i have done several of these to back up data on the system.
The system is running as the following drive configuration:
2 @ 200GB Raid 0. Vista ultimate 64 upgraded from Home Premium by the original owner.
The Laptop works in everything else and is in pristine condition all over.
Let me know if more info is needed to make a determination for help please.
Thanks in advance!
Robert
Attachments:
x205-SLI1.txt ‏442 KB

It sounds like a hardware problem to me. Your best bet considering it is new is to take it back to the place of purchase and exchange it for a working model (if it's within the exchange period) or contact Toshiba Support and have it repaired under warranty. Se the Warranty Link at the top of this page for details.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Mac Mini 2006 MA607LL/A need to buy dual layer burner

Hi guys. I bought a MA607LL/A mac mini. I need to upgrade so it can read dual layer burn cd. So I guess super drive? Which one will fit? Ty

I wouldn't waste the time or money upgrading it to a Superdrive.
Your best bet is to get a faster and more reliable external tray loading USB desktop DVD Drive.
For Example: I'm happily using an LG GE24LU20 that I picked up on sale at BestBuy a few years ago.

Dual Layer Burning (Mac Mini 1.42) UJ-845C

So I understand that the Matshita UJ-845C superdrive is capable of burning Dual-layer DVD's, however it appears that perhaps that support has been turned off in firmware version DPP9? Anyone know if there is a firmware update for this that will enable the Dual-layer burning? Seems a shame to have a DL capable drive without DL support :,(

My System Profiler Information does not show "+R DL", yet other peoples systems with the same model drive (but different firmware) DO show the "+R DL" which would be a good indication that the drive is merely firmware crippled to not support "+R DL".
As for evidence, I think that showing that:
a) Other peoples Superdrive model UJ-845C supports "+R DL"
and
b) The same drive (Matshita/Matsushita/Panasonic) OEM'ed to other Manufacturers (Toshiba, etc.) supports "+R DL"
is a definitely excellent indication that this drive is "+R D" capable and that the DL capability has been crippled in firmware. Now the question becomes how to get the "real" drive stats from the drive without reading it straight from firmware or otherwise check the drive in a different manner?
This could be accomplished 2 ways that I can think of right off of the top of my head:
1) Extract the firmware from the same model drive (UJ-845C) with the D8PB firmware and then update that firmware on a UJ-845C that has DPP9 firmware and see if it then supports Dual-Layer burning.
Obviously doing will void any warranty, however if the drive does not support "+R DL", it is not a great loss, as it can be replaced with another model UJ-845 that does support "+R DL"
2) Speak with Panasonic regarding this particular part number and see what they have to say about the capabilities of the drive and whether or not it is a feature that is disabled in firmware
I have sent an email off to them already regarding this and hoping that I will receive a reply soon.
3) Speak with Apple directly regarding this particular UJ-845 model number and see what they have to say about it's dual-layer capability and whether it is turned off in firmware or not.
While I agree that when purchasing a new machine you can only count on the specs that Apple provides as to the functionality of the machine, if indeed the "+R DL" feature is merely turned off in firmware and the drive is indeed capable of supporting this, then that would mean that Apple deliberately turned it off, and the question becomes "why?" The most likely answer would be that they were advertising other more expensive machines that had "+R DL" capability such as the Dual-G5 and the iMac G5, and again we come to the question of "why?"
I have been using Apple machines since way back when..around the time of the Apple ][+ and I love the company, however if this is a firmware disabled feature, then Apple should provide a firmware update to D8PB that would enable the "+R DL" functionality that all specs on the drive that have been found elsewhere on the internet claim it has.

Does my iMac have a dual layer burner?

I'm trying to burn a 155 minute dvd. I only have 120 minute blank dvds.
I'm told I need to buy dual layer dvds but this will only work if I have a dual layer burner.
I have a PIONEER DVD-RW DVRTS09.
Am I good to go?

The best way to find out if you have a Dual Layer DVD Burner, is to click  then "About This Mac" then Click on More Info, then in the new System Profiler window, on the left hand side select "Disc Burning". Youll be presented with something that looks like this (This is from my 24-inch Late 2006 iMac):
OPTIARC DVD RW AD-5630A:
Firmware Revision:          2CH9
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          To show the available burn speeds, insert a disc and choose View > Refresh
What you'll be looking for here, in the DVD-Write section which I've bolded and underlined for quick spotting, if you have -R DL and/or +R DL, those are Dual Layer DVDs that you can write to.
***Be careful as some Macs shipped with Dual Layer Drives (MATSHITA Brand) that only burned +R DL Dual Layer DVDs, meaning you CANNOT burn -R DL Dual Layer DVDs. So make sure you verify that your drive supports the dual layer DVDs that youll be purchasing before you go to the store.

HP BDDVDRW CH20L & Dual Layer Burning

The above DVD burner came factory installed. I am curious if it does dual layer burning for DVD?
Have a video project that will not fit on 4.7GB dvd.
Thanks in advance.

Nevermind, it says it does right on the tray. Cool!
Next time I will look first!

Dual Layer Burning Message. What does it mean?

I have set a Break point in DVD SP, Put a Dual Layer DVD in my machine, I press burn and this box comes up
*You have chosen a dual-layer configuration disc and the output destination is set to DVD recordable media. Continuing will write the image to the media. Also, if too big, the image will be written to the maximum size that the recordable media will allow, leaving the image incomplete.*
What is this telling me? How can I burn a Dual Layer DVD? I do have a Dual Layer burner
Thanks in advance

try using Build & Format

External Dual Layer Burner

Is there such thing as an external firewire dual layer burner that will work with iDVD?

I have read reviews for the Lacie d2 External 16x Dual-Layer DVD+/-RW Drive with FireWire/USB2.0 (Model 300920)
Seems to works. Just be certain that it is compatible with your operating system.
Sue

MSI DR8-A Dual layer burning?

i would like to ask if MSI would release a firmware for the DR8A that would support dual layer burning? ive read this article at http://www.afterdawn.com/news/archive/4863.cfm which is for the pioneer dvd burner which states that they might release a firmware that would enable dual layer burning without upgrading the hardware itself. and also another thing that ive read was benq dvd burners will also release an update firmware that would support dual layer burning. http://www.cdfreaks.com/news/8616.
i would be glad to hear if MSI would release such a firmware upgrade.

hi guys,
found this on sony website ... will msi release a new dual layer burning drive or just update the existing bios like the pioneer would do...

DVD SP Dual Layer burning and DVD@ccess difficulties

I'm making my first dual layer project and I can't format from DVD SP 3 b/c I get this error message (see below). I burned the project in toast 6 and the project works fine in Macs except for the URL DVD a@cess link doesn't connect. (It works in my computer) The DVD 2nd layer doesn't work in some PC's. I"m using Verbatim + R DL Media. Can anyone give me some suggestions?
Can anyone explain this error message to me:
Formatting was not successful. Layer 1 cannot exceed Layer 0 for a OTP configured disc. Please choose a suitable marker location that will support this condition.

Hey James
this particular error means that layer 1 is larger (as in size) to layer 0.
since we dont have enough details of your project, i cannot correctly tell you what to do.
i will ask you however, where did you set your layer break? tell us how much larger layer 1 is to layer 0. what will you be burning your image to, DLT, disc, hard drive? did you check the format properties and see where a suitable layer break can be? did you set layer break to automatic?
any help could give you a fast answer
Mikey M.

DUAL LAYER BURNING for Power MAc G5 dual 2.5

I am trying to upgrade my manufacturer installed superdrive ( PowerMAc G5 2.5 dual late 2005 model) I was wondering if any body could help me choose the right one. I was thinking on buying a Pioneer 16X DL SuperDrive DVR 111D .
Please advice
Thanks

Which DVD drive is reported by System Profiler? Look under the Hardware > Disc Burning section.
I ask because Apple has been known to disable certain features (including DL burning) in some of the drives they ship. For example, some G5s shipped with a OEM Pioneer DVR-117D which is really a dumbed-down version (slower burning, no double-layer support) of the double-layer burner, the DVR-108.
A firmware flash with the official DVR-108 firmware can restore this missing functionality.

DR8-A firware upgrade to dvd dual-layer?

I am very happy with my DR8-A burner, but i am wondering if MSI has any plans to upgrade the firmware to the future Dual-layer dvd formats. I have read that Bueq is offer this for their new drives.

if it can upgrade to 8x8 - good or bad news

G4 DVD Dual Layer question

I have a 14" G4 1.07GHz iBook with a Non DVD Burning CD/CDR/CDRW/DVD drive. My question is, will it READ a dual layer DVD? Thanks!

Hhmmm...let me know if it works for you. I have (I think) the exact same setup, and my drive spits out dual discs. We bought Bruce Springsteen's The Seeger Sessions, which is a dual disc, and I had to resort to alternate methods to import the songs into my iTunes library. I Googled after having the problem and found others who had the same problem.

DVD dual layer write speed?

Anybody know what the maximum write speed of the Superdrive is, for dual-layer DVDs?
I have a late 2011 MacBook Pro 15" and I want to buy some blank DL DVDs. I'm looking at Verabtim DVD+R DL blank media. They offer both 2.4X and 8X speeds. I've read that the 8X disks - which are more expensive, roughly 15 for the price of 20 of the slower disks - can be a problem for older drives that don't support that speed.
I already know that my Superdrive will write at 8X or more for a single-layer disk.

"Be sure to take full advantage of:
About this Mac > ( More Info ) > Disk Burning ..."
Yup, this showed me that my 8X (single layer) disk could in fact be burned at 8X, but without any DL disks for testing, ATM doesn't tell you anything about burning speeds.
Thanks for the confirmation that I do NOT want to buy the 8X disks. I've gone ahead and ordered the 2.4X Verbatim disks. I also saw some labeled as 2.4-6X, and I suppose those would work with my 4X drive.

DM4-3055DX DVD-Dual Layer Burner

Similar Messages

Maybe you are looking for