DM6 crashes with "Rim.Desktop.exe has encountered a problem"....

lenovo t400, win XP Version   5.1.2600 Service Pack 3 Build 2600
AppName: rim.desktop.exe   AppVer: 6.0.0.40   ModName: msvcr90.dll
ModVer: 9.0.21022.8   Offset: 0006c955
This happens during 'organizer sync' after it has read through the device calendar and while (at the end of ?? ) reading through the lotus calendar.
I'm running Lotus 8.0.2 FP 1
to make it worse, about half the time it leaves the device in a 'hung' or 'locked' state. The only way to return the handheld to operation is to remove/replace the battery, forcing a reboot.

I had the exact same issue\error occur. I found another forum that suggested editing your calendar mapping and removing the attendees from syncing. I tried this and now my syncs again.
My guess is that if some of your calendar invites have to large of list of invitees and it crashes the sync to your blackberry.
Hope this helps.

Similar Messages

Crystal Reports kicks me out with a crw32.exe has encountered a problem ...

I have not been successful in getting Crystal Reports XI Rel 2 to work for me, except for one very simple report that accesses one table and simply prints out all fields. When I try to link tables and do something more complicated, it kicks me out with a 'crw32.exe has encountered a problems and needs to close error'.
I am running Windows XP Professional Version 2002 SP3 and using the CR Informix ODBC Driver 5.3 to access data from an Informix DB.

I downloaded and was able to write a report off the Access test DB. So - I went back and connected to Informix, wrote a report that connected 6 tables and now I get a syntax error (it has not kicked me out yet, though!). I get -201 error with no explanation. Here is the sql generated by CR:
SELECT pallet.pallet_id, item.category_id, item.sub_category_id, category.description, sub_category.description, item.quantity, item.std_cost, sub_category.default_recovery_pct, carton.status, pallet.status, location.location
FROM arc:informix.category category, arc:informix.sub_category sub_category, arc:informix.item item, arc:informix.carton carton, arc:informix.pallet pallet, OUTER arc:informix.location location
WHERE (category.row_key=sub_category.category_key) AND ((category.category_id=item.category_id) AND (sub_category.sub_category_id=item.sub_category_id)) AND (item.carton_key=carton.row_key) AND (carton.pallet_key=pallet.row_key) AND (pallet.location_key=location.row_key) AND category.description<>'Dump' AND (carton.status='CLOS' OR carton.status='PALT') AND (pallet.status='DOCK' OR pallet.status='PUTA')
ORDER BY pallet.pallet_id, item.category_id, item.sub_category_id, category.description, sub_category.description
I don't see a problem with it. Any other suggestions? Do you think the CR has a problem with a table called 'Item' since that is a reserved word?
Edited by: sriewe on Jun 10, 2011 10:13 PM

"(program).exe has encountered a problem and needs to close. We are sorry for the inconvenience."

Hi, I was using Tweetdeck for the past few months without any problems. Recently, the application still works fine.. it opens as normal, all posts I am following appear etc., but when I try to send a tweet the application closes and I get the error
"tweetdeck.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
I uninstalled tweetdeck and reinstalled it many times. Sometimes it would work for twenty minutes, other times not at all. I got fed up trying, so uninstalled it and downloaded Seesmic. This new application opened perfectly, all users I am following and their tweets updated perfectly, until again I went to post a tweet and it closes and I get the error
"seesmic desktop.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
As these are the only two applications I have used that give me this error, and are also the only two applications I have used that are related to Adobe AIR, I can only assume the problem is connected somehow?
I was wondering if any of you might have any suggestions on how I could fix this? I am not the most tech saavy guy, so any help would be greatly appreciated as I am starting to lose patience with it!
Thanks in advance.

You might try uninstalling the AIR runtime and re-installing it. You might also try contacting the developers of these applications to find out whether the problem is related to issues they already know about.

Firefox crashes with error msg: plug-in container exe has encountered a problem and needs to close. Mod name: Mozallac.dl

Firefox crashes with error messages: plug-in container exe has encountered a problem and needs to close. Details: Mod User 32.0.3.5379 Mod Name: mozallac.dl
Why does this constantly occur?

'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences'''<Enter> in the address bar
Select '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

I am facing with the problem "plugin-container.exe has encountered a problem and needs to close. Please suggest how to fix the problem.

I am using desktop computer with windows XP. Sometimes, I am facing with the problem "plugin-container.exe has encountered a problem and needs to close". After showing this event, the browser disappears automatically.

See if there are any Crash Reports ID's saved.
Type '''about:crashes''' in the Location Bar and hit Enter.
Then open each Crash Report and once the report is loaded completely, copy and paste the URL of each report into the the '''''Post as Reply''''' box in this thread.
IMO, seeing that you are using WinXP, you might be better off with the older Flash 10.3.183.90 version. Flash 11.0 and later have "improvements" that don't work on WinXP - only Vista and later. Adobe did continue to support and provide security updates for Flash 10.3 until a few months before WinXP went EOL back in April of this year.

Latest QuickVPN(v1.3.0.3) reports "WGET.exe has encountered a problem..." with WRVS4400N

I have a WRVS4400N(latest firmware V2.0.0.7) and am trying to connect to it for the first time using the latest QuickVPN v1.3.0.3 installed on a Windows XP Professional (w/SP3) computer. Installation of QuickVPN with no errors, but as soon as I ran it and tried to connect, it reported "wget.exe has encountered a problem and needs to close. We are sorry for the inconvenience...". I tried it on another machine, also with XP Prof SP2 - same error. I have looked at the soultion in other similar threads of removing spaces and that did not resolve the issue. Please let me know if any one has a solution to this problem.

It sems that the problem was with the Quick VPN client. Please try to download a copy of the QVPN from the Linksys site and try to re-install it on your computer. Please make sure that the previously installed QVPN has been remove before you reinstall it.
Message Edited by aponikikay on 01-13-2010 07:49 AM

LiveCam.exe has encountered a problem and needs to close. Constant Error. HELP PLEASE

Alright so basically, my parents got a buy-one-get-one-free offer on webcams at christmas, and so they gave me one for my own as i lost my old one. Everything was working fine, seemed like a great camera.
However, randomly one evening when i tried to open Live! Cam Center to record a video, it refused to open, instead giving me a small white box with the loading symbol inside (thats where live! cam center usually opens out into the UI) and a boz saying "LiveCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience.".
Now i thought that it was just a random one-off thing, but it happens EVERY time, WITHOUT fail. The cam works fine on MSN and skype etc, just when i try to record anything or manually take pictures , cam center doesn't work. And it doesn't seem to just be cam center, almost every software i've tried for just plain recording/capturing failed.
Tried updating to latest drivers and software, tried using older versions, tried using the cam from my family pc (identical cam) - failed, tried using all different USB ports randomly, failed. I'm really desperate here now, i'm at the point where i'm almost going to give it away and buy a non-creative webcam cos its really annoying.
My webcam is the Live! Cam Video IM Pro. Here's a copy of the error report from windows, its the same every time:
AppName: livecam.exe AppVer: 2.2.3.0 ModName: ctvidcap2.dll
ModVer: 2.2.3.0 Offset: 00002ca
PLEASE HELP! IM DESPERATE >_

See if there are any Crash Reports ID's saved.
Type '''about:crashes''' in the Location Bar and hit Enter.
Then open each Crash Report and once the report is loaded completely, copy and paste the URL of each report into the the '''''Post as Reply''''' box in this thread.
IMO, seeing that you are using WinXP, you might be better off with the older Flash 10.3.183.90 version. Flash 11.0 and later have "improvements" that don't work on WinXP - only Vista and later. Adobe did continue to support and provide security updates for Flash 10.3 until a few months before WinXP went EOL back in April of this year.

Crw32.exe has encountered a problem and needs to close. We are sorry for t

crw32.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
AppName: crw32.exe      AppVer: 12.0.0.683      ModName: msjet40.dll
ModVer: 4.0.9511.0      Offset: 000cdb4b
I am using a MS Access 2003 DB. I get the above error when I try to open a New Report with the current instance of the DB; if I use a backup from 2 weeks ago it works with no problems. Is there any insights; I would prefer not to restore from the backup??

Update from my earlier message:
tried to install on a win7 32 bits. and I get the same error message.
Restarted the Win7 64 which was working and now I get the same error message too
so 3 different machines three diffferent operating systems and 3 times CR crashes on opening MDB files....
here is the error message
Log Name:      Application
Source:        Application Error
Date:          5/19/2010 7:43:13 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Faulting application name: crw32.exe, version: 12.0.0.683, time stamp: 0x47c8be9a
Faulting module name: MSJET40.DLL, version: 4.0.9756.0, time stamp: 0x49246e48
Exception code: 0xc0000005
Fault offset: 0x00021b27
Faulting process id: 0x708
Faulting application start time: 0x01caf7aca12f0b2b
Faulting application path: c:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\crw32.exe
Faulting module path: C:\Windows\system32\MSJET40.DLL
Report Id: 498c39ee-63a0-11df-b1fe-00508dbcaa0b
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-05-19T23:43:13.000000000Z" />
    <EventRecordID>4412</EventRecordID>
    <Channel>Application</Channel>
    <Security />
</System>
<EventData>
    <Data>crw32.exe</Data>
    <Data>12.0.0.683</Data>
    <Data>47c8be9a</Data>
    <Data>MSJET40.DLL</Data>
    <Data>4.0.9756.0</Data>
    <Data>49246e48</Data>
    <Data>c0000005</Data>
    <Data>00021b27</Data>
    <Data>708</Data>
    <Data>01caf7aca12f0b2b</Data>
    <Data>c:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\crw32.exe</Data>
    <Data>C:\Windows\system32\MSJET40.DLL</Data>
    <Data>498c39ee-63a0-11df-b1fe-00508dbcaa0b</Data>
</EventData>
</Event>

Crw32.exe has encountered a problem and needs to close while running report

Ever since I installed HEAT 9, Crystal Reports 11 crashes periodically. I get the message "crw32.exe has encountered a problem and needs to close." This message usually appears after I run a report, enter my DB credentials, and enter parameters.
I also have Report Viewer installed as a part of another application called Wasp. I can open reports using the report viewer but when I close them the entire Wasp program crashes every time.
Both of these problems only happen with HEAT 9 installed. I do not have this problem with HEAT 8.4 installed.

I suggest you contact the makers of HEAT and ask them if they support your configuration. It may be they do not support multiple versions of CR installed. It may also be caused by the order you have installed the various programs. Try using the repair feature for each program in various orders to see if that resolves the problem.
Thank you
Don

An error occur indesign.exe has encountered a problem and needs to close.

I am having trouble with adobe indesign CS5. Each time I opened my document an error occur indesign.exe has encountered a problem and needs to close. It got send report and don't send report to Microsoft. I have already used google web as a help and nothing came up. I have already tried to uninstall and re-install it but still same issue occured. Other Adobe products such as Adobe Dreanweaver CS5 and Adobe Flash CS5 work fine.I would greatly appreciated if you can walk me through. Thanks.

Windows error reports are too vague to help us much. Did you get an error number?
Is this happening now every time you start ID? That would likely mean the recovery data is damaged. You can find the InDesign Recovery folder in your user profile. This folder is probably hidden, so you'll need to set Windows Explorer to show hidden and system files, then look in the same directory as the location of InDesign Defaults, which you can find for your version of Windows in the information in this link: Replace Your Preferences
Once you find the InDesign Recovery folder, either rename or empty it, then ID should start normally. If you file crashes again when you try to open it from the file menu please tell us as much information as you can.

Lotus Notes 8 + BB DM 5.0.1: BB Desktop Manager has encountered a problem and needs to close.

I just purchased a Bold 9700 and am trying to sync my Lotus Notes 8 calendar to my BB. I am using Desktop Manager 5.0.1. I appear to have set up the syncronization properly because it starts but when it reaches record 1057, I receive a message that reads "BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience." When I click on "details" I see the following information: Error Signature. AppName: Desktopmgr.exe   AppVer: 5.0.1.37   ModName: Insections.dll   ModVer: 7.1.1.129 Offset: 001a32ed. How can I successfully sync my calendar and BB?

laureng wrote:
I just purchased a Bold 9700 and am trying to sync my Lotus Notes 8 calendar to my BB. I am using Desktop Manager 5.0.1. I appear to have set up the syncronization properly because it starts but when it reaches record 1057, I receive a message that reads "BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience." When I click on "details" I see the following information: Error Signature. AppName: Desktopmgr.exe   AppVer: 5.0.1.37   ModName: Insections.dll   ModVer: 7.1.1.129 Offset: 001a32ed. How can I successfully sync my calendar and BB?
Hi and Welcome to the Forums!
Here is an article that may be pertinent:
KB10340 "BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience." during the synchronization process
Otherwise, I would think that record 1057 is a bad record and is causing this problem. You might try figuring out which item that is and deleting it, then trying again.
You also could try activating advanced logging and seeing it that provides more details to help you:
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Moving a guideline results in "crw32.exe has encountered a problem"

While editing a report in the designer for Crystal Reports 2008 (SP 3), I frequently, and annoyingly, get the "crw32.exe has encountered a problem and needs to close" error while moving or manipulating a guideline. This happens in new reports, old reports, whether the guideline is actually locked to an object or not, and is an issue on multiple hardware/OS configurations. My personal workstation's configuration:
Windows XP Pro (SP3)
Crystal Reports 2008 (SP 3 - no hotfixes)
.Net 1.1, 2.0, 3.5 are installed.
Accessing MS SQL Server 2008 database using the OLE DB (ADO) driver.
The error in the event viewer is:
Faulting application crw32.exe, version 12.3.0.601, faulting module crw32.exe, version 12.3.0.601, fault address 0x00627c2d.
My hardware config is using multiple monitors but I have the same issue on machines that only use single monitors.
DEP settings have no effect on this error.
I have not installed any CR hot fixes. We know that they break the way that .net interfaces with the CR web engine so that when you run a report that has a record selection formula that limits by a date, the record selection formula gets messed up and the report returns an error (issue for a separate posting.)
Anyone have any ideas as to what is going on or how to fix it?

Up to you.... Use what is supported or you have to deal with the crashes.
The fix in FP 3.2 is specifically for the date parameter and SQL 2008. Only issue is you have to change drivers. It's the same driver but supports SQL 2008, MS SQL Servers uses OLE DB as it's client engine. I believe CR specifically looks for the native 10 driver, MS changed the name of the dll.
You may want to search MS's site, I don't believe MS supports the MDAC or WDAC version of that client when connecting to SQL 2008.
If you must use that driver then you MUST NOT use MS SQL Server 2008.
To get the SQL Server 2008 client go to MS site and you can download the standalone Client install MSI.
Bottom line is you have to use what is supported and fixed known issues.
Thank you
Don

Blackberry Desktop Software has encountered a problem and needs to close

When I try to open Blackberry Desktop the message I get is that Blackberry Desktop Software has encountered a problem and needs to close. I have a Blackberry Bold 9700 and as a result I cannot sync. Does this mean I need to uninstall and reinstall? If I reinstall will I lose the update that I have on my phone that has changed the interface? Will I have to reinstall that as well?
Thanks for any help or advice you can give me.

I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Also, for XP users, please be sure you are on SP3...that is the current minimum level required with the latest Desktop Software.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience. I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to s

firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to start Firefox, even in safe mode. i have checked with latest antivirus softwere also.. i didn't find any thing suspicious.
== This happened ==
Every time Firefox opened
== after loading firefox 3.6.6 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

I was having this problem few days ago,and I have fixed.Try this steps-If you have AVG antivirus so go on firefox>Tools>Add On and Disable AVG safe search and AVG tool bars too.Then restart computer.

Export op results in error "EXP.EXE has encountered a problem and needs to

I have been working with Oracle Designer on an old computer (running Windows 2000 and an Oracle 10.2 database) and I am attempting to get it to run on a newer computer (running Windows XP and an Oracle 11g database (release 11.1.0.6)). Regarding the Designer version, I installed the same version (9.0.4.3) that was running on the old computer. On the new computer, features of the tool have worked (ER Diagrammer, DB Design Transformer, Design Editor), but the Export operation of the Repository Admin Utility did not work. When I attempted to run Export, the following happened:
(1) The "Save As" dialog was displayed (as expected).
(2) A EXP.EXE script window opened for the Export command and displayed the following:
Export: Release 9.0.1.5.1
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
(3) Immediately, an error dialog appeared stating "EXP.EXE has encountered a problem and needs to close. We are sorry for the inconvenience."
I am testing Export so that I can test Import, which is the operation I will need to load data from the old computer.
Any ideas how to fix this problem?
If it can't be fixed, are there other ways of transferring data from one repository installation to another?

add the 11g client to the pc and then modify the registry so that it points to the imp and exp from the 11g client.

DM6 crashes with "Rim.Desktop.exe has encountered a problem"....

Similar Messages

Maybe you are looking for