DMA 2100, can't get to settings menu
Having trouble getting a DMA 2100 setup.
After it boots, I get to the welcome screen and I can usually get one or two remote presses before it freezes up.
So typically I can press the down arrow to get to the settings menu, and then I press OK to enter the setting menu and it freezes (no response from any keypresses on remote). Sometime I can get to the settings menu but can't do anything once I'm there.
I have tried the factory reset several times to no avail.
This happens both when I am plugged into the network and also when I am not.
Any ideas on what can be causing this or what else I can try?
freed0m wrote:
I'm also having this problem. I navigate in the settings of the DMA2100 and it just locks up! No idea why. Remote stops working but the remote works for the mapped TV volume settings. I can tell the DMA2100 locks up because the cursor stops flashing in the network settings config.
Any help appreciated! No idea why this has started.
Thanks
Ben
This article may help http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=50d35bbd44624fb3a43d6bc1287e2345_1df45637215a4badb....
Similar Messages
-
I have apple tv. i have rebooted three times. can't get to settings menu. I have wildlife pictures on the tv screen. what do I need to do?
That is the screensaver. Does the light flash when you press a button on the remote?
-
Can't get to settings on ipod 4th generation
Can't get to settings on ipod 4th generation
What happens when you try?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?
The problem is I cannot turn on wireless setting. The "sign in to icloud -- enter appleid password" popup will not go away. when i enter the pw and click ok, the same balloon pops up again. If I click "cancel" it pops again. Since I am not on the internet (because I cannot turn the ipad wireless on) the sign in to icloud obviously will not work. Vicious circle.
-
Can't get my dropdown menu buttons to link to another scene.
I can’t get my dropdown menu buttons to link to other scenes within the same Flash file. The buttons are unresponsive during playback – as if no code were attached to it. Here’s what I have as my AS2 code on the dropped button that is supposed to link to the "Published" scene/page:
on(release){
_root.gotoAndPlay("published", 1);
I'm working with Actionscript 2.0 in Flash CS6.
Any help would be appreciated!
Thanks,
RobertHi kglab,
I do get these compile errors:
Scene=published, layer=Buttons, frame=1, Line 1 Statement must appear within on handler
Scene=published, layer=Buttons, frame=1, Line 2 Statement must appear within on handler
But, I think you are correct about the setInterval Loop. On the home scene I’ve created a movie symbol which is set to call another swf file:
loadMovie("frontSlideshow.swf", _root.movie1);
This frontSlideshow.swf file has the following code in every 10 frames:
this.stop();
pause = function ()
play();
clearInterval(pausei);
pausei = setInterval(pause, 5000);
This will pause the timeframe every 5 seconds before sliding to the next frame so that each image can be viewed. It seems odd that the code from this subclass file would affect the timeframe of the main class/file where the “movie1” symbol is located.
Best,
Rob -
HT1414 Can't get into settings because of an icloud message
I have a message on my ipad from icloud backup stating This ipad hasn't been backed up in 3 weeks. Backups happen when this ipad is plugged in locked, and connected to Wi-Fi. I have had it plugged in for a few days, all the support states to go into settings to restore but I can't get into settings, it will not let me power off the ipad or anything.
Question has been answered, read some other posts with the same problem and figured it out.
Thank you. -
cannot open the menu and cannot even turn it off, the white apple image is displayed on the screen. how can i get into the menu?
Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears - ignore the red slider.
-
My Ipad 2 started talking to me. I can't activate anything - can't get passed the opening screen to slide to unlock. I can't get to Settings or any other page. Can you help, please??
If you need more help see:
iPad: Configuring accessibility features (including VoiceOver and Zoom) -
How do I reset the keypad shortcuts on a Convoy? When I flip open the phone a new text message screen opens and I can't get to the menu.
That's weird that these iphones are restored/activated through iTunes. I have a Apple so I have iTunes, yay!! I am guessing that the link that you gave me will tell how to put this iphone into Recovery mode? Now, this old iphone would of been activated on his laptop, which is with him and he is out of state. I have a new Apple, his new iphone would of been activated on our new Apple computer because he was here for Christmas and he didn't bring his laptop with him, or did he bring it with him, I don't remember now.... Now the question is, will I be able to restore his old iphone on my new computer seeing it would of activated on his laptop which is with him out of state. I am so worried that I am going to lock up this phone now. I thought I deleted the orginal guestion, and rewrote it, good grief, lol Oh wow, you are a level 10, I would be at a level -10!
-
Sign in to icoud won't take new password and can't get to settings
The sign in to icloud box is coming up on my IPAD. I went into myapple id online and changed my password for the icloud account. It will not take the new password on my ipad and when I get the option to reset, it tells me to turn off airplane mode or connect to WIFI, but i can't get to settings to do anything. I tried a hard reset and the password window just came back up.
Hi,
Which website your are using to update the Adobe Flash player? No Adobe website ever ask for any id and password to update the flash player.
If you are using MAC machine and its the password prompt while installing update that you are talking about then please follow What userid & password do I need to install Flash Player?
-Varun -
On My Wife's iPad 4, when she enters a note it is automatically copied to her Gmail email account. I can't get the settings right to do the same thing on my new iPad Air.
Any suggestions?Go into Settings>Mail,Contacts, Calenders then you need to click on your email and make sure you have the thing next to the word notes switch on.
Then they should sync over the iCloud
Hope this helps! -
How can I get a horizontal menu widget to display at 100% width?
I have created a horizontal menu with uniform spacing and have stretched it out to each side. I can't get the red indicator line to show up on the left side, but it does show on the right. No matter what I do, the menu continues to show up short on the right side of my screen in preview mode.
Does anyone know how to do this properly? Has anyone else had issues with it?
Thanks!Hi,
We are aware of this limitation with the Menu and Panel Widgets and hope to address the same in future.
Thanks,
Vikas -
My daughter was taping on the iPad and turned the voiceover on. I have a passcode on the iPad. I can't enter it now when the voiceover is on because the keyboard is weired. how do I reset? Please any idea?
Touch or tap the field that you want to use/select and it should get a box around it ; then double-tap that field to activate/type it. Once you've entered your password you can do the same (i.e. touch to select, double-tap to activate) to gradually get into Settings > General > Accessibility > VoiceOver and turn it off.
So to enter your passcode you first need to tap the 'slide to unlock' button to highlight it (it should get a box around it), then double-tap it to unlock it. Then for your passcode tap the digit that you want and it should get a box around it; then double-tap that digit to type it; and similar for the other three digits in your passcode.
The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither -
How can I get into settings if I don't have the exchange password for my iPod Touch
I can't update my iPod Touch, 4th gen. through iTunes because it says it can't connect. I can't get into my settings because it keeps asking for an exchange password that I don't remember. Is there some way I can reset the iPod without having access to either of these means?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
Restoreing from backup will not change the need for the forgotton password if the backup was made with password on the iPod
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I have an iPhone 5 that started up in Chinese, and I can't get to settings as it is new
I can't get into the settings because it is a new phone, so I am at the startup phase. I can't read what the startup is saying, because it is in Chinese. I live in the United Arab Emirates, and purchased the phone from a reputable electronics store in Dubai Mall. It has a legitimate serial number, and is not a fake. I can ony guess it is set up for the "Asia" market, but I can't read the language to change it back to English (I'm American).
Please help!!!!!http://support.apple.com/kb/HT2371
Maybe you are looking for
-
Ink problem with HP Photosmart Premium Printer C309a
I replaced the photo black cartridge with 564XL, and black will not print at all. Did I use the wrong cartridge. What else could be causing the problem?
-
I have lumia 720, i want to up date my phone to windows 8.1, if if i update to windows 8.1, my data like applications and contacts will delete permanently?
-
Transfer of Employee responsible from CRM to ERP
Hello, I've replicated employees from ERP to CRM. I create a new corporate account in CRM. I assign an Employee Responsible. On the relationship, I assign a sales area and the partner function Sales Representative. I also maintain other sales area da
-
In iphoto, when I click on Print, the preview image it shows me is an enlarged section of my photo. (In iphoto I hadI cropped the photo and checked "with no restraints." ) Once the photo goes to Print, I can't fix it back to the way it is in iphoto.
-
I wrote a stack implementation using a LinkedList, I have null constructor to create the first stack and it works fine but now i have to create a copy for a second stack using the element of the first constructor this my code import java.util.LinkedL