DMA Timeout Error

Changing to XP-64Bit, I installed the software for my HP Scanjet 8270, and haven't been able to scan ever since. I continuously get a DMA Timeout error. If I let it sit for a while, eventually I get an HP-CUE Scanning Flow Component error, and then an automatic application/shutdown error window with the AppName: hpqkygrp.exe, AppVer: 9.0.0.257 details. After 2 solid weeks of back and for with the pathetic HP non-Support, I haven't gotten anywhere. I have uninstalled/re-installed, downloaded their latest FULL version, this thing just doesn't work. It doesn't work with the XP scan wizard either. It gets about a 1/3 of the page and then just hangs in the scanner with a DMA Timeout error. Please help !!!

I'm having the same problem. My scanner is a HP ScanJet 8250. I'm using Adobe Pro Extended & Windows Fax & Scan programs. Currently running Windows 7 (64 bit) Professional on an Intel i7-2600 CPU with 4x2.00GB of DDR3-1333 RAM
When using the feeder tray, it will either feed 3/4 of a page before timing out or it will not scan anything at all. When using the flatbed, the scanning bulb will move down the glass but then stop at the end and timeout.
I did have this scanner fuctioning properly on another computer using Windows 7 (64 bit) Ultimate but the hardware specs elude me at this point in time. I saw there was a firmware update for previous generations of Windows but nothing for Windows 7.
So far I have tried uninstalling & reinstalling the driver. Switching through every USB port on the tower. And I've swapped out the USB cable.
Any help would be greatly appreciated.

Similar Messages

1473R DMA timeout at high speed?

I'm using a 1473R with a Basler line camera spl2048-140km. I managed to modify the example to run the camera on both 8 tap 8 bit mode and 4 tap 12bit mode. Both run well at low speed. However, there are two issues when I try to run it at high speed.
If I set the frame trigger at relatively high speed before I start the acquiring (like 30kHz), a DMA timeout error will jump out as soon as I start it (error -8999). If I set it at low speed (like 100Hz), it will run fine as I increase it to 30kHz after it starts.
Another issue is, when I try to push the speed of the camera to its limit, which is 70kHz for single channel mode and 140kHz for dual channel mode, I will always have the error -8999. It happens when the speed reaches 100kHz in 8 tap 8 bit mode, and 50kHz at 4 tap 12 bit mode. I wonder where the bottle neck is and if there will be a way to solve it.
Thanks!

I'm not that familiar with the FPGA code for the 1473R, but I am fairly sure that the DRAM example has been tested with fairy fast cameras. That said, it seems from looking at it that it does not have a good feedback mechanism if PCIe bandwidth is not available. It's only feedback seems to be if the host DMA buffer fills up (e.g. host code doesn't read it fast enough). Since PCIe/memory bandwidth is extremely host-dependent, it is quite possible this example is not well tested with the combination of very fast cameras and some systems that have more jittery PCIe bandwidth. I'm not sure of the specifics of the DMA FIFO behavior, but my assumption is that the number of elements remaining really only concerns itself with host space available. For most situations, the minimal amount of FIFO built into the DMA engine likely makes this work fine.
First, I'd try instrumenting the code to figure out which specific part in the FPGA code is timing out. The example doesnt seem to track all the error cases well.
Assuming it is the host DMA that times out AND it always reports that there is free space available, my suggestion would be to modify the code to let the DMA step retry with the same data the next clock cycle on a Timeout and let the data back-up in DRAM as needed.
Eric

TimeOut error while running a report on the report server

Hi,
One of my report is taking 30 minutes to generate the output. It works fine when I run it locally, but when I run it on report server I encounter the following error message. Its a timeout error. Any solution other than tuning the query, please.
500 Internal Server Error
org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
     at java.lang.Class.newInstance0(Native Method)
     at java.lang.Class.newInstance(Class.java:237)
     at com.inprise.vbroker.orb.SE.read(SE.java:28)
     at com.inprise.vbroker.orb.DelegateImpl.handleReply(DelegateImpl.java:711)
     at com.inprise.vbroker.orb.DelegateImpl.invoke(DelegateImpl.java:606)
     at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:459)
     at oracle.reports.server._ConnectionStub.getMainFile(_ConnectionStub.java:1283)
     at oracle.reports.client.ReportRunner.getMainFile(ReportRunner.java:488)
     at oracle.reports.rwclient.RWReportRunner.getMainFile(RWReportRunner.java:121)
     at oracle.reports.rwclient.RWReportRunner.getMainFile(RWReportRunner.java:95)
     at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1322)
     at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1139)
     at oracle.reports.rwclient.RWClient.doPost(RWClient.java:328)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:283)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)

Hi Bhasker
Try setting idleTimeOut under connection element in server configuration file to a large value.
Regards
Sripathy

Getting timeout error while updating a record from c#

Hi,
I have around 30k records in a tables. When I update that record inside the Transaction (Enterprise Data Library, c#) , it takes long time and throws timeout error.
But I am able to update the same record via Toad.
In the morning I tried same updating the record, it works without any change in the code or script.+
is it due table lock or db related issue? please adivse, how to resolve if occurs again.
anand

Code:
private static void Save()
using (DBTransactionManager dbTransactionManager = new DBTransactionManager())
try
DataTableDAL.Instance.ExecuteDML("Update Voyage SET BallastBonus = 30000 WHERE ID = 'AE53B610BEA743EC8AFBAED0C8349BF8';");
//commit database
dbTransactionManager.Commit();
catch
dbTransactionManager.RollBack();
throw;
Table
Column Name     ID     Pk     Null?     Data Type     Default     Histogram     Encryption Alg     Salt
ID     1     1     N     NVARCHAR2 (32)          None
CALCNUMBER     2          N     NUMBER (10)          None
CURRENCYID     3          N     NVARCHAR2 (32)          Frequency
CALCTYPE     4          N     NUMBER (5)          Frequency
ESTIMATEDESCRIPTION     5          Y     NVARCHAR2 (200)          None
ESTIMATEGROUPDESCRIPTION     6          Y     NVARCHAR2 (200)          None
BALLASTBONUS     7          Y     NUMBER (12,2)          None
BALLASTBONUSCOMMPCT     8          Y     NUMBER (6,3)          None
ISESTIMATE     9          N     NUMBER (1)          None
ADDITIONALSTEAMVALUE     10          Y     NUMBER (8,4)          None
ISADDITIONALSTEAMPCT     11          Y     NUMBER (1)          None
ADDITIONALPORTVALUE     12          Y     NUMBER (8,4)          None
ISADDITIONALPORTPCT     13          Y     NUMBER (1)          None
CREATEDBY     14          N     NVARCHAR2 (32)          Frequency
CREATEDDATE     15          N     DATE          None
UPDATEDBY     16          Y     NVARCHAR2 (32)          None
UPDATEDDATE     17          Y     DATE          None
LUMPSUMCARGOCOST     18          Y     NUMBER (1)          None
BUNKERPRICEMETHOD     19          Y     VARCHAR2 (30 Byte)          None
INCCONTCALCRESULT     20          Y     NUMBER (1)          None
FINAL_EST     21          Y     NUMBER          None
SPOT_VOYAGE     22          Y     NUMBER (1)          None
ISRUNCOSTEDIT     23          Y     NUMBER (1)          None
Index
Table doesnt have any index, except primary key index.
Total Records
35,000
Hope this input might sufficient to help me.

Open socket timeout error

Sometime I can write to the local shared variable through data socket. But sometime cannot. Even though, I still can read/write through shared variable monitor.
The error is in the open socket, said connect to peer timeout. I set timeout to 10s or left blank both not work.
I am using 8.2.1 on vista. The computer has 2 lan ports.
I met almost same case long time ago. I solved it by diable NETBIOS and one of the lan port.
This time, I disabled netbios already. But in vista, seems not able to disable the other lan port.
Any suggestion?

hi turbot,
I had same problem of timeout error.just check if system Firewall is on or off if it is on then make it off and then run the program.i don't know how much this will help you,it helped me.
GAK
Gaurav k
CLD Certified !!!!!
Do not forget to Mark solution and to give Kudo if problem is solved.

Why do i keep getting the "internet connection timeout" error message?

i have been upgrading a few standard itunes albums to itunes plus versions through my 3g mobile broadband connection, while not exactly a fast process, it was working fine until i started to get a backlog of 3 or 4 albums which were waiting in a queue to be downloaded, now every time i do the "check for downloads" option i get the "internet connection timed out" error message...this has been going on for 2 days! am i right in suspecting the backlog of albums is too much for my 3g mobile broadband connection? this is really doing my head in, if any of you techies could help me, it'd be much appreciated...?

yes i have recently updated to itunes 8.2.1, but i am starting to think its apple's servers (i tried to download at my brothers house...different computer and connection...same connection timeout error), because it will still let me download an album, but not necessarily all of the tracks. when i questioned itunes customer services about the seemingly hit and miss state of affairs with downloading, they told me to wait 3 weeks before trying to download the tracks that were giving me the grief (2 tracks from an arctic monkeys album)...which kinda indicates they know there is a problem and are trying to fix it, why else would they say wait 3 wks??? they gave me 5 free music tracks too, which is handy.

Frame timeout error using Configure Trigger3.vi

Hi all,
I'm triggering the frame capture of an .avi with an RTSI connection. However, I keep getting a frame timeout error when I use the IMAQ Configure Trigger3.vi. I don't get any timeout errors when I just use the IMAQ Generate Pulse3.vi but I am trying to sync the frame capture to an optical switch. If I just use IMAQ Generate Pulse3.vi, I get a .avi but the frames are completely out of sync with the switch, but if I use both IMAQ Generate Pulse3.vi and Configure Trigger3.vi I get nicely separated images but it takes an age and ends up in a timeout error.
I want to capture e.g. 500 frames, over the course of 2 s - so I've set my frame timeout to be 2000. At my current acquisition rate (31680 Hz per line (1024 pixels)) 500 frames corresponds to a total of 1.578 s (images are 100 pxls in height). This is much less than the total scanning time. Where am I going wrong?
Thanks in advance for your help.
Miika
Attachments:
screen.png ‏32 KB

Hey Miika
What are the hardware you are using. These vi's only work with specific hardware and this may be why they are not functioning correctly. For example the Configure trigger3 vi only works with the following PCIe-1427, PCIe-1429, PCe-1430, PCIe-1433.
Matthew Trott
Applications Engineer
National Instruments UK
www.ni.com/ask

Timeout error while running Report

Hi
All,
Windows 2000
Oracle Report builder 10g
Oracle developer suite 10g
when I had OLD computer i was able to run report more than 10 minutes. Now, I got NEW computer and i am getting TIMEOUT error while running report more than 10 minutes.
Any clue?
Thanks,
Vishal

As Fs says it depends on how you're running the report.
If you're running via a server then you need to make the change on that server or amend the URL you are using to run the report to add the enginereponsetimeout parameter.
You can amend this parameter on the server either by using the Application Server Control as I described in my last post or by directly editing the config file. This file will be called <reportservername>.conf and can be found in the oracle_home/reports/conf directory.
In this file look for the engine tag and see if the engineResponseTimeOut property is set.
E.g:
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="20" callbackTimeOut="90000" engineResponseTimeOut="5">
</engine>
This value is in minutes so increase to a time larger than that it takes to run the report.
If instead you're running the report via Report Builder on your own PC then look for a file called rwbuilder.conf in the same location on your PC and make the same change as described above.
If this property isn't in the file then the engine isn't supposed to time out at all so the problem may well be something different. But to discount it try setting to a large value like 30.

Crystal report server2008 (XI R2): CMC session timeout error

HI
Crystal report server2008 (XI R2): CMC session timeout error
Accessing folders, scheduling reporting or running reports are working fine with Central Management Console (CMC) within the Crystal report server or accessing CMC within VPN machine. But when CMC is accessed through browser from client desktop i.e through proxy URL, users are not able to access folder or personal folders to view any reports even admin user is not able to access folders. When users try to access folder or personal folders it gives session-timeout errors. Within less than a 1 or 2 minutes it is showing session timeout error. Appreciates any one help on this quickly.
Regards,
Patrick Raths

Please post your query to the [Business Objects Enterprise Administration|BI Platform; forum. This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
BTW., if thi is an important issue, I'd recommend creating a phone case.
Ludek
Edited by: Ludek Uher on Aug 11, 2010 1:58 PM

Getting timeout error while executing my report

Hi experts,
I need to get data from a Ztable which is having more than 64 millions of records. That query itself is taking more than 20 min to execute. I have used package size while retrieving tha data but still taking same time to execute, Giving me the TIMEOUT error .
Provide some suggetions to use different types of SELECT quries that can be used to improve the performance.
Thanks & Regards,
Bhanu

Hi ,
I am working as an abaper for Service Management module.
I need to show the prmise details inthe output of alv. Before that i need to get the meter reading details and need to do some calculations, by which i need to show idle one (Here only i need to hit a ZTABLE which is having more than 64 million records). For that idle premise user can select multiple pemises by using check boxes and can create notification by pressing a pushbutton 'CREATE IS NOTIFICATION' which exist on the application toolbar . So i can not run this report in background.
Thanks & regards,
Bhanu.

Timeout error in ECC "INTERNAL.CLIENT_RECEIVE_FAILED Error while receiving by HTTP (error code: 402 , error text: ICM_HTTP_TIMEOUT)"

Dear Experts,
I am very critical situation due to this timeout error in ECC, please help me as much as you can. Go-live date is very near, but I am not getting any clue why this error is occurring. our ECC system is EHP 4, and PI is dual stack 7.4
My scenario is synchronous ABAP proxy to HTTP_AAE. request is triggering from ECC via proxy and reaching to third party (bank) through PI, I am reviving the response back in PI from bank. But from PI to ECC the response is not reaching. So in ECC after the defined Timeout limit its getting timed out.
I have tried everything by increasing the timeout in ECC more than 15 minutes in HTTP_TIMEOUT under SXMB_adm in ECC, but nothing worked, even if I am increasing for half an hour then also its getting timeout after half an hour.
response from bank to PI is coming within 30 to 40 seconds, but PI is not sending the response back to ECC.
This is classical scenario, and I have checked the trace via SXMB_Moni in PI as well as in ECC, in ECC its showing the timeout error, but in PI i did not see any trace for this error.
I have read many thread on SCN for the same error, and everywhere it has been suggested to increase the timeout, and I have tired that, it didn't help me.
All ABAP proxy configuration has been done as follows.
RFC destinations in ECC
LCRSAPRFC(TCP/IP)
SAPSLDAPI ((TCP/IP))
G type destination to path "/sap/xi/engine?type=entry"
G type destination SAP_PROXY_ESR to path "/rep"
All the destination connection test is working fine.
but i have a doubt on G type destination(AAE_XDJ) to path "/sap/xi/engine?type=entry" which is returns the status code 500 with message "Empty HTTP request received", is it ok with 500 ?
Configuration in ECC Integration Engine configuration is as follows
Questions
How the message gets pushed to ECC from PI, once the message received in PI, I believe by G type RFC destination on path "/sap/xi/engine?type=entry" , please clarify.
How to trace this, if message is not getting pushed to ECC, I mean I have checked the trace in PI XSMB_MONI, but didn't get anything for this error. In ECC SXMB_moni only I am able to the timeout error.
Please expert help me as soon as you can, this error really effecting me badly in front of management
Thanks,
Farhan

Hi Hareesh,
I configured the scenario based on ICO, and again I received the same timeout error in ECC.
I am really sick with this error, and I have raised the OSS message to SAP. Meanwhile I just want to double check my entire configuration with you. Please see the below configuration (for classical) for ABAP proxy to HTTP_AAE, and let me know if anything is wrong.
Request structure (ECC->PI->Bank)
<?xml version='1.0' ?>
<PaymentInfoMessage>
<PaymentInfoRequest>
<CompanyCode>Partner01</CompanyCode>
<BankCode>BSFRSARI</BankCode>
<StartDate>2006-07-09T00:00:00</StartDate>
<EndDate>2006-07-09T00:00:00</EndDate>
<TransactionType>940</TransactionType>
</PaymentInfoRequest>
</PaymentInfoMessage>
Response Structure (Bank->PI->ECC)
<?xml version="1.0"?>
<PaymentInfoMessageResponse>
<PaymentInfoResponse>
    <TransactionType>940</TransactionType>
    <SequenceNum>1</SequenceNum>
    <ReceiptTime>2002-01-02T18:01:00</ReceiptTime>
    <ProcessStatus>1</ProcessStatus>
    <Comment>No Comment</Comment>
    <TransactionData>:20:MT940-1007200601
:25:3210000079901
:28C:190/0001
</TransactionData>
    <CompanyCode>PARTNER01</CompanyCode>
</PaymentInfoResponse>
<StatusCode>OK</StatusCode>
<StatusDetail>OK</StatusDetail>
<ResponseItemCount>2</ResponseItemCount>
</PaymentInfoMessageResponse>
ESR Configuration
Please see the below screenshot for ESR config. I have created 4 data types, 4 message types, 2 Service interface (synchronous), 2 mapping and one operation mapping.
I just want to clarify about selecting the Request and response message type in inbound and outbound service interface.
<?xml version='1.0' ?>
<PaymentInfoMessage>
<PaymentInfoRequest>
<CompanyCode>Partner01</CompanyCode>
<BankCode>BSFRSARI</BankCode>
<StartDate>2006-07-09T00:00:00</StartDate>
<EndDate>2006-07-09T00:00:00</EndDate>
<TransactionType>940</TransactionType>
</PaymentInfoRequest>
</PaymentInfoMessage>
Response Structure (Bank->PI->ECC)
<?xml version="1.0"?>
<PaymentInfoMessageResponse>
<PaymentInfoResponse>
    <TransactionType>940</TransactionType>
    <SequenceNum>1</SequenceNum>
    <ReceiptTime>2002-01-02T18:01:00</ReceiptTime>
    <ProcessStatus>1</ProcessStatus>
    <Comment>No Comment</Comment>
    <TransactionData>:20:MT940-1007200601
:25:3210000079901
:28C:190/0001
</TransactionData>
    <CompanyCode>PARTNER01</CompanyCode>
</PaymentInfoResponse>
<StatusCode>OK</StatusCode>
<StatusDetail>OK</StatusDetail>
<ResponseItemCount>2</ResponseItemCount>
</PaymentInfoMessageResponse>
ESR Configuration
I have simply created 2 data types for requests(ECC->PI->Bank) and did one to one mapping. Similarly for response(Bank->PI->ECC) 2 data types, one to one mapping for this as well.
But I just want to clarify about selecting the Request and response message type in inbound and outbound service interface. please explain me this for synchronous interface.
Please see the below structure from ESR and inbound and Outbound service and let me know if the selection of Request and response message types is correct or not.
OutBound service interface
Inbound service interface
Thanks,
Farhan

Timeout error while filling setup tables

HI all
I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
Going through threads i have come to know that to solve this issue
1.BASIS team have to increase backgroung processses or memory
2.run it as a background job.
When I went to Program->Executein the backgroundPrint background parameters window has popped up.
What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
Please let me know.
Thanks,
Harika.

thanks for the reply.
it was set to LOCL only.
But i have 3 options in the dropdown windowsprinter :Send to onenote2007
Microsoft XPS document writer
OUrprinteraddress
WHich one to choose here?
Edited by: harikag on Aug 10, 2011 8:47 AM

IRQ timeout error while executing the custom personality fpga in veristand

Hi,
I have gone through the below link and created a custom fpga code to write analog output and digital output through NI 9269 and NI 9472 card respectively.
NI Veristand add on - fpga configuration editor.
https://decibel.ni.com/content/docs/DOC-35499
i was able to import the .fpgaconfig file in veristand system definition window.
When i execute the code, i am getting IRQ timeout error.
Could any one help me how do i debug this error?
i am interested to see how the veristand host code is executing it.

Hi,
Have you tried to simplify the FPGA code? If the issue is related to the VCE, you should post there :
- https://decibel.ni.com/content/message/67188#67188
The developers of this tool will answer you.
Posting the error message or the FPGA code will also help us
Regards,
--Eric

All of a sudden I cannot Forward emails in TB 31.1.2 - I get SMTP timeout error

And I've tried everything. Shutdown Emsisoft virus prot., turned off firewall, got into Verizon router (btw, I'm going right into the Verizon router-not thru a switch), no port forwarding, even tried to forward an email in Safe mode in Win 8.1 x64. This just happened. I can Write an email OK (i.e., from scratch), but just forwarding, even a small text message won't forward. I even installed an older version of TB. HELP! HELP!
I either get the SMTP timeout error or I get "check your email and messaging settings." My wife has the exact same setup in TB 31.1.2 but she uses Win 7 x86. -gg

This has been reported as [https://bugzilla.mozilla.org/show_bug.cgi?id=1060901 Bug #1060901]. If you have an account on Bugzilla, please consider voting for that issue.
Several other people have sent in the same support request as you, noting this happened after they upgraded to version 31.1.
The exact error message is: XXXX is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail.
'''This happens in Thunderbird 31.1.0 when your mailing list description includes several words separated by spaces.'''
Although not ideal, these workarounds should let you use your mailing lists until a proper fix is implemented:
* While composing an email open the address book and select the list you are trying to send to, highlight all the names in the list and drag them to the To: box. This uses your existing data without modifying it.
* Replacing the blanks " " between the words in such lists' descriptions with an underscore "_". This requires modifying your mailing list(s) description(s).
'''About automatic updates'''
Automatic updates are the default in Windows.
You can [https://support.mozilla.org/en-US/kb/configuration-options-updates?esab=a&s=automatic+updates&r=1&as=s customize such behavior], however, it's under '''Tools > Options > Advanced > Update'''.
My suggestion would be to set it to '''Check for updates, but let me choose wether to install them.''', specially if you depend on email for critical / important business or personal matters.

Windows Vista System download timeout error

Hi,
Every Adobe Reader download i've tried keeps giving me a download timeout error.
I have removed all Adobe programs
Adobe Reader X (10.1.3)
Adobe Air
Acrobat.com
Adobe Reader 9
AcroRead.msi
then i re-started my laptop and tried to re-install Adobe Reader X (10.1.3) but i am still getting the same download timeout error message, where am i going wrong?
could you please help ?
thank you
kas

Try downloading the offline installer from
http://get.adobe.com/reader/enterprise/

DMA Timeout Error

Similar Messages

Maybe you are looking for