DMC 350 bad wireless?? clock keeps resetting? etc. ect.

When placing the DMC 350 I had to replace my routers with a couple of WRT320N, because the DMC350 placed 5 meters from the older router just wouldn't stay online.
This doenst HELP..!!! it's online 5 meters from the living room to the kitchen and it just doenst stay online.!!! drops music. Sound sometimes gets louder.!! (there is no door to the kitchen)
The clock keeps resetting. after setting it to update trough inet. It sets back after a shutdown to firmware default.
Right now I'm playing a live stream (radio) to a DMP100 and the DMC350 and the DMC350 drops sounds regulary.! The DMP100 has a cable attacht to it ..

Okay... bin there, done that
Let me tell you what I have and who I am. Because otherwise the options you'll provide of finding a solution to my problem mabye be to something I already have tried.
First of al al frimware from all the hardware is up to date.
2 x WRT320N
DMC350
DMC250
DMP100
DMRW1000
NMH405
3 storage building
The first WRT320N WAN connected cable modem LAN connected HP Procurve 2824 24 10/100/1000 switch (3th storage)
The second WRT320N LAN connected HP Procurve 2824 24 10/100/1000 switch (livingroom) (WAN NOT CONNECTED)
The DMC 350 is connect trough WLAN about 5 meters placed from the second WRT320N free line of site
The DMC 250 is connected trough fully tested pacth cable CAT 5e Lan site HP Procurve 2824 24 10/100/1000 switch
the DMP 100 is connected trough fully tested pacth cable CAT 5e Lan site second WRT320N
The DMRW1000 is connect trough WLAN with the second WRT320N
The NMH405 is connected trough fully tested patch cable CAT 5e Lan site HP Procurve 2824 24 10/100/1000 switch
The second WRT320N is WLAN enabled 5 GHz 20Mhz ONLY..!! the first WRT320N is WLAN disabeld.
No wories about the laptops that are N network enable.
I normaly place Cisco Unified Comunications hardware with div. AP.
I'm a Microsoft Certified Partner.
so please come with some problem solving options I might not have thought of.

Similar Messages

HH3 clock keeps resetting...

My Home Hub 3's clock keeps resetting back to jan 2003. I have to keep hanging it manually to the right time.
Does this mean the hub is resetting itself?

HH3 is a pretty manky piece of kit (to quote BT advert...our best home hub yet).
Mine managed a total reset in the 1st day...lost ALL my programming, passwords addresses etc.
The clock is permanently an hour slow if you let it get it's time from ANY time server, and if you set it manually any reset or power glitch puts the clock back to 1st Jan 2003.
And why oh why make a router with 3 100Mb ports and 1 GigE port, couldn't they (BT) have stretched the budget a bit and make it all GigE ports.
As for the wifi, it's supposed to select the clearest channel, mine insists on sticking with the same channels as my neighbours.
I'm dreading what will happen tomorrow when OR engineer comes to enable Infinity2, what will he managed to screwup?

Touch clock keeps reseting

My partners iPod Touch has a nasty habit of resetting the clock at random.
It is solved when synced back to iTunes but it's annoying that it keeps loosing the settings when in use.
Is this a unit fault and what can be done to stop it happening?

I've been having the same problem where the clock resets randomly (different hour, minute, day, month. July seems to be a favorite wrong month.)
The clock will reset immediately when it is connected to the PC, but not always to the correct time. Sometimes I need to disconnect/connect it a couple of times to get it synced back to the correct time.

E63 Clock keeps resetting

Hi
I currently own a Nokia E63. It had been flat for a few days. After charging, I noticed that the date and time were a few days out so I re-set them to the correct date and time. The next day, I noticed that the time had set itself back to yesterday's date at 10:00 am. It now keeps on doing this every hour, no matter what date and time I set it to.
Any help?
Thanks

it seems there's something wrong with your battery. did you try to use another one?
If you want to thank someone, just click on the blue star at the bottom of their post

Computer Clock keeps getting reset

My computer clock keeps resetting itself. I have replaced the PRAM battery with a brand new one and I still am receiving this error message. What else could be going on?

The card was already installed, working fine. To troubleshoot another issue (I cannot export video from my Canopus ADVC300), I removed all PCI cards. All 4 slots are used. After I removed the 4 PCI cards, my Mac started losing time. I then replaced the PRAM battery and reset the PRAM. This didn't solve the issue. When I put the other 3 PCI cards back in, nothing happened as well. When I put the Sonnet Tempo SATA back in, the computer started retaining the time. Unfortunately, I the computer is not retaining the time anymore- even with all 4 PCI cards installed. How do you reset the MOBO?

I keep getting "the connection was reset" etc when logged onto my bank.

When logged on to my bank (business account) and setting up weekly payments I can set up a couple of them but then I get the "the connection was reset" etc error message. If I try to log in again I just keep getting the same message.
Then I have to open up Chrome, log in to the bank, and finish the job with no trouble at all. Generally I prefer to use Firefox; but maybe not for much longer!

Thanks cor-el, I'll give your suggestions a try next week when I have to log into the bank.
Will let you know how I get on; I just hope I won't have to keep on doing it every time!

I'm unable to download the ois 7.1 software update. It keeps saying unable to verify because I'm no longer connected to the internet. I AM connected...reset etc. now what?

I'm unable to download the ois 7.1 software update. It keeps saying unable to verify because I'm no longer connected to the internet. I AM connected...reset etc. now what?

I have the same issue.. i've reset network settings but still not resolved.. anyone - any ideas?

G4 keeps resetting Mail, Dashboard, etc (new to Mac)

I am new to Mac but finally trashed my PC and got a used G4 off Ebay. Anyway, my settings, for no reason I can find, keeps resetting. Like Mail, will have to be set up all over again. The pictures under iPhoto are now gone, and the folders I made. The Dashboard time to --- ---- ----
Any help? Would it best to restore the system?
I have a G4. here some info if it helps:Machine Name: Power Mac G4
Machine Model: PowerMac3,6
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 2
CPU Speed: 1.25 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 512 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.4.8f2
System Version: Mac OS X 10.4.11 (8S165)
Message was edited by: Darin35
Message was edited by: Darin35

Darin,
My system is having the same symptoms, I have posed this questions before and received no responses. If you do eventually get a response please let me know.
Thanks,
J

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. Please help

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. I am accessing it via strong wireless connection and it works fine on other devices. Please help.

zapgrap wrote:
there is no information of locations.
Then no information exists. Use the Report a Problem button within the app to report it.

Home wireless network keeps "timing out." Help!

I currently have an eMac with a wired connection to an AirPort Extreme base station that creates a wireless network in my home with Time Warner Road Runner. I also have an Airport Express that acts as a relay station.
For some reason lately, the wireless internet connection is S-L-O-W and often I can't load a page and get the message "network connection timed out, server may be busy." The wireless signal is excellent and I've restarted both the Base Station as well as the Express but no luck. I use a G4 PowerBook and my wife uses an iBook and the problem occurs on both
The wired connection works great.
Can anyone help me figure out what's going on? Thanks for any help.
Sunil
PowerBook G4 Mac OS X (10.4.7)

I'm running into a simiar situation with Time Warner Road Runner. I have 3 PCs with a wired connection to a linksys router that creates a wireless network for my MacBook.
For the first 4 days the wireless network worked great. I could access the internet from anywhere in the house on my MacBook. On the 5th day I couldn't connect to the internet on my MacBook. I've power cycled the cable modem and the router, updated the router firmware and even called Apple Care. No one has an answer. Like you, my wired connections work just fine. And the wireless signal is great. The MacBook can see the wireless network and get on it but cannot connect to the internet through it.
I believe it may be a DHCP lease renewal issue for the IP address. The MacBook doesn't show an IP address in its Network Configurations for the router. My network locations keep resetting their port priorities to bluetooth instead of airport and everytime I do a diagnostic I get a message that says "another program has changed your network configurations, click ok to continue". But I don't have any answers.
Maybe someone out there does?

MSI 870A Fuzion.... BIOS keeps resetting it self after restart,

HI NOOB here
I've just brought my first ever parts for my first ever computer build.....fitted everything perfectly and booted....
1st: logo screen came on
then another screen came saying low battery, thunxsomething...IDE, bios clock unset...."hard drive not detected"
3rd: screen came up asking either f1 to go into bios f2 to load defualts
i pressed f2 little dash flashes in the top corner
rstarted with second {the same procedure as explained }try ubuntu live usb loads......
after shutdown and installation of OS
i attempt to troublkeshoot the issue of bios time, IDE, and no hard drive detected
by going into the bios... which was totally from whats expected i.e. in colomns instead rows
i was expecting bios style shown below however after thought i got adjusted to the new rows one
http://www.tomshardware.com/reviews/x48-motherboard-comparison,1781-5.html
loaded optimal settings, changed bios clock and date, adjusted boot preority
saved AND EXITED
BUT foud that my MSI 870A Fuzion.... BIOS' keeps resetting it self to factory defualt... ,
AND>>>>>>>>>>>>>>>>>>>>>>>>>
also found that it didn't go directly into the NEwly installed OS.....
HELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELP
I'm its quit anoying knowing that this is my first ever computer build

Quote from: npm1 on 18-November-10, 22:29:03
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
just as an extra, a small splat of water went on the board i simply wiped it away........(happened before first boot) would this by any chance affect the bios
Quote
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
what message exactly you are getting at bios post screen?

Linksys WRT54GC keeps resetting

Out of sudden my Linksys wireless router started to reset a few times a day. This results in all customisations being lost and having default SSID without encryption.
I successfully upgraded the firmware to the latest version 2 build but not change. In the limited logs of the router I don't see anything strange.
There is no problem with router's functionality, it's just that it keeps resetting and then I have to reconfigure all the previous settings. Importing them is not a long term solution.
From time to time the Power LED light is orange (this could result in reboots). I have no idea why this problem occurs.
The user guide says nothing about the orange light ot the power LED. Could be some hardware problem but it is something not persistent.
Any hints are appreciated.

Make sure the power adapter is properly connected to the router and to the power outlet. Make sure also it is the correct power adapter for the router. The output of the power adapter should be 3.3 V DC, 2.0 A. If the power adapter is correct, then it could be a possible hardware issue. Make sure the firmware has the version 1.06.1. If it is the latest firmware installed, do a firmware re-flash. It means, you still need to do an upgrade using the same firmware version. After that, do a reset and powercycle the router. After the upgrade process, reconfigure the router.

Serious iPod problem (iPod keeps resetting)

I've had my iPod for almost 2 years and until now everything worked fine. i listen to it on average 1 hr each day, and until 2 days ago battery seemed fine (I would recharge it each week, though it would be only half empty).
So 2 days ago I was listening to music, tried to go forward and all of a sudden it stopped playing music, it was just frozen. I reset it and it came back with a "sad" iPod icon. Ocassionaly it would end up with the icon as if the battery is dead. I reset it a few more times and mostlt I got the same "sad" icon and only a few times the battery icon.
I than tried to hook it up to my computer via USB and it would just reset and PC/iTunes would not see it.
Since I've had it for 2 years I thought maybe the battery has gone bad (but does it happen just like that without any signs?) so I tried to charge itbut when I connect it to charger it keeps resetting.
I than tried to force it into disc mode and that worked but as soon as I connected it to my computer it would reset. Even when I tried to charge it in disc mode it would reset after a few secunds.
So, if left alone it is in off mode, but if I push any button it starts up, and eventually shows the sad iPod icon. If plugged into the charger or PC it keeps resetting.
I have no way to get into it and update the iTunes, or access iPod. Has anyone seen this? Does is sound like a battery or is it something worse? I am out of warranty and would not want to spend too much money fixing it since it probably does not worth much, though i wish I could save my iTunes collection...

Hey guys, I'm having a similar problem though a slight variation on a theme. maybe you can help me out.
I have a 4th generation iPod (20 Gig) and it told me my ipod battery had died, so i plugged it into my computer to charge. It started out showing me the large symbol of the battery with the lightening bolt until there was enough to power the iPod so that it could run with iTunes. Except once it finally had enough power and interacted with iTunes it went into a black and white mode instead of the normal color mode and the the battery icon up in the top right corner was black with the lightening bolt. I got the normal "do not disconnect" message except that was black and grey as well.
I figured i'd update my ipod as it was still charging and added a new playlist and it appeared to take the music, but when I unplugged the ipod it showed me the icon of the folder with the exclamation point and gave me the address http://www.apple.com/support/ipod. Since i didn't have time then i reset it and then plugged it in via a car charger to see if charging it would fix the problem. Unfortunately, when I unplugged it from the computer to take to the car and reset it, it started rebooting over and over. I was able to force it into disc mode so that it would continue to charge without wasting so much battery rebooting (it didn't reboot in disc mode) and continued to work on it when i got home.
At home i tried every fix they have listed on the site and in my ipod handbook and nothing has worked. I have reset, restored twice, and charged the battery. The weird thing is that it
1) is recognized by itunes
2) just turns off if i try to use the charger
3) appears to be able to download music to it but makes a clicking noise
4) since it doesn't recognize the charger I can't finish the restore process
5) still gives me the folder icon when it tries to turn on
PLEASE HELP IF YOU CAN!
If you can think of anything i can do to fix this I will be so appreciative.
Thanks guys!

Airport Extreme (n) router keeps resetting.

My internet keeps going on and off, Ive reset to factory defaults and it keeps resetting every 10-15 minutes for a few seconds. The only thing I have changed is added 1 port forward.

I have the exact same problem and it has only been since just after the new years actually about the time the new time capsule was released it started happening I don't really want to hard wire my connection that is why I have wireless router so my Mac doesn't have to be like pc with wires coming out of it like an octopus as a caveat my time machine stopped working without warning too a few days ago??????????????HMMMMMMMMMMMMMMMMM anyone else?

HT2845 why does my wireless mouse keep losing connection?

Good morning,
My wireless mouse keeps losing connection...my batteries are at 100% and the "discoverable" option is checked off. Why is this happening?

Hi:
PRAM=parameter random access memory - reset like this:
http://support.apple.com/kb/PH11243
SMC=system management controller reset like this:
http://support.apple.com/kb/HT3964
Sometimes resetting these "fixes" odd problems - and it cannot hurt.
To make a device a favorite, go to system preferences>bluetooth. Highlight the device. If detailed information is not shown, click oin the little gear>show more info. Then click on the gear again and make the device a favorite.
Barry

DMC 350 bad wireless?? clock keeps resetting? etc. ect.

Similar Messages

Maybe you are looking for