DME file for RFFOUS_C

hi,
When the standard transaction F110 (rffous_c) is run for printing checks, does it create any DME file?
Regrads,
jaydip

hi
good
F110 works in he following process.
1. I have an ABAP program which is specifically designed for printing cheques or giros.
2. In that program we create print cheque variants depending on which form we wish to print the cheque. You have to enter the variant name, beside the program name, on the "Printout/Data Medium" tab. Otherwise, your system will prompt you to do so when you click the "Printout" icon.
3. Maintain the variant by clicking the "Maintain Variant" icon. Then check to see if housebank, acct id, cheque lot number and printer already match. Click "Print Immediately" if you wish to print the cheque, or unclick "Print Immediately" to print it later. Save your work.
4. Click on the "Printout" icon, click "Start Immediately," and fill in the job name.
5. The system will create spool request.
6. If you choose to print the cheque later, you can preview your pre-printed cheque from SP02. You can also print, display, etc. from this t-code.
thanks
mrutyun^

Similar Messages

Kidno Transfer to Dmee Files for Norway

Hi all,
We're on ECC6 and want to generate DME output in XML format payment files.
There is a DMEE template available - CGI_XML_CT
Despite my best efforts I cannot seem to figure out how to get the KIDNO into the DMEE file - or the Notes to Payee.
DMEE can use fields from the assorted structures like FPAYH, FPAYP & DMEE_PAYD but the KIDNO field does not appear in any of these structures.
Tried mapping wiht FPAYP-STRFR but that too is not working unfortulately. can there be any other way to bring this field in ?
Kindly help or share knowledge if someone has come accross this before or have done DME admin for Norway banks.
Thanks
Max

Hi Mrugesh,
If any source data field is not available in standard tables FPAYHX/FPAYP,FPAYH, then use DMEE exit code to get required one. And use custom exit as source type.
Cheers,

Incorrect SIA code in DME file for Foreign payments in Italy

Hello All
I am trying to create a DME file payments in Italy.
The DME FIle is being created by program RFFOIT_FOR.
I am Getting an incorrect SIA code.
Can anyone tell me from wehere can I update this code
Thanks a LOt!!!

Hi
Thx for your prompt reply
I have already applied the note.
Now I want to populate the table
I need the list which contains countries and their UIC codes

MT 100 DME file for multiple Transactions

Hello
We are not able to generate the <b>DME file in MT100 format for Multiple Transactions of the Bank Account after F110.</b>
We are able to generate DME file in MT 100 format for a Single Transaction.
Please suggest us if we had missed any configuration or any specific process is required to generate the DME file in MT100 for Multiple Transactions of the Bank Account after F110.
Regards
Srini

Hi,
I am just trying to give some additional information on this one. Here is a snippet from the PDF handbook.
Option:
SpoolBatches Enter Yes to tell the PDF Print Driver to print an entire batch of transaction to a single PDF file. The default is No.
Please do keep in mind...
• To create a linearized PDF file (for page-at-a-time downloading), you must set this option to No.
• If you are using single step processing, you must set this option to No.
In addition to this, you must also turn off the MultiFilePrint callback function. To do this, remove or comment out the CallbackFunc option. Here is an example of commenting out the CallbackFunc option:
< Print >
; CallbackFunc = MultiFilePrint
You cannot generate linearized PDF files if you set the SpoolBatches option to Yes because when linearizing, the PDF Print Driver must have the entire contents of the PDF
file in memory. Since batches can be very large, it is not practical to keep an entire batch in memory.
Important point for your reference:
I just went through the FAQ in the below link and understood that there are some problems when you try to create a single PDF for a batch as a whole - Acrobat Reader only display the first transaction in a PDF file which contains multiple transactions.
FAQ Book link -> http://download.oracle.com/docs/cd/E16256_01/faq_book.pdf
PDF Handbook -> http://download.oracle.com/docs/cd/E16256_01/pdf_book.pdf
I did not get a chance to explore much on this. Please explore if it helps. Thank you.

DME File for credit card incoming payments?

Hi Everyone,
Someone can help me with this requirement.
I am configuring the payment run for FICA transaction code FPY1 and I have done all the config for incoming payments with credit card, but the only that I cannot do is generate a DME file after the payment run to send it to the bank. The funny thing is when I run a payment run with transfer this one generates a DME file without problems.
If any of you know something about how to meet this requirement I would be very grateful for your help.
Thanks in advance,
Snk316

Hello brittney22196,
Thanks for the question, and welcome to Apple Support Communities.
The following article outlines steps for creating an iTunes Store account without a credit card:
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Thanks,
Matt M.

DME FILE for belgium

Hi All,
Right now we are using format BE_PIBDTA for dme genration through APP but as per this format it is gerating file as flat file
but my client requirement is that DME file should be .xml format
Can any one suggest me how can i achieve this
Thanks & Regards
Phaneendra

Hello Phaneendra,
goto dmee and copy BE_PIBDTA i. e. to /ZBE_PIBDTA.
You will find the parameter for creating an xml-filein DMEE-Tree: Properties Tab Administrative data.
Create even a paymentmedium format /ZBE_PIBDTA (copy from BE_PIBDTA) and assign /ZBE_PIBDTA.
You even can activate the parameter in Original structure BE_PIBDTA but this is in my opinion not recommendable, I prefer always a copy from existing entries without changing existing SAP-Standardsettings.
Best regards
Horst

"Purpose of Payment" Tag in Outgoing DME File for India RTGS Payment

Hi All
While setting up DME tree for India , we need to populate field “Purpose of Payment” as per the norms laid down by the Reserve Bank of
India (RBI). Please help on following points if anyone has experience of developing DME tree for RTGS payment method of country India.
How the “purpose of payment codes” have been populated based on vendor invoice or any other FI data
How DME tree configuration has been done for the XML Tag <CtgyPurp>
Currently RBI has following codes :
Thanks and Regards
Nitin

Hi Nitin,
It looks like it's not related to TRM.
Maybe you can ask the FI experts in the relative area.
Thanks, Feng

Program for DMEE file for Australia (Westpac Bank specified)

Dear All,
Request you to advice me the program that we needs to assign at the payment method to down load the payment medium file (DMEE) in the format of West pac Bank in Australia if any..
I have a configuration requirement to down load the payment file from R3 ( after execution of F110 ) for the purpose of sending that to Westpac Bank (Australia) towards payments (Bank transfers) for vendors mentioned in that file. And for that I will have to create a new program to assign that in Payment Method so that we could able to down load the payment file in required format (Westpac). As i came to know that SAP provides various programs to fulfill the above requirement, Request you to let me know that program for Australia, so that i will use (Assign in Pmt Method) rather than creating new program.
Thanks in advance,
Gopi

Hi,
Please check the program .. "RFFOAU_T".
Thanks,
Jagannadh

Duplicate DME files for payment run

Hi
When you run a proposal one payment medium file is creating but when you run a payment run, there are 2 files are generating. they are duplicate files. why the program is generating duplicate files?
solution please
Manikond

Dearn,
the system generate duplicate files if you got two different banks on your documents. Is that your case?
regards

Need DME capability for payment program RFFOUS_C

Hi,
I am trying to create a DME file for Accounts Payable where we currently use the payment program RFFOUS_C. What do I need to do to get this done?
Arne

Hi again,
Let me be more specific with what we need. We are currently using payment program RFFOUS_C for Accounts Payable to print checks. What we need now is a way to download the check data to a header and detail file in ACH format. Is there another payment program that we can use or otherwise what changes do I need to make to RFFOUS_C? We are using version 4.0B if that makes any difference.
Thanks,
Arne

Need DME cabability for payment program RFFOUS_C

Hi,
I am trying to create a DME file for Accounts Payable where we currently use the payment program RFFOUS_C. What do I need to do to get this done?
Arne

Hi Arne,
Please check the following links.
<a href="http://www.sap-img.com/financial/configure-the-data-medium-exchange-for-making-payments.htm">http://www.sap-img.com/financial/configure-the-data-medium-exchange-for-making-payments.htm</a>
<a href="http://www.sap.cmich.edu/fihr/hr/productive-payroll.doc">http://www.sap.cmich.edu/fihr/hr/productive-payroll.doc</a>
<a href="http://www.onepurdue.purdue.edu/contribute_pdf/ PY7-PayrollReportsandInterfaces.pdf">http://www.onepurdue.purdue.edu/contribute_pdf/ PY7-PayrollReportsandInterfaces.pdf</a>
Hope This Info Helps YOU.
<i>Reward Points If It Helps YOU.</i>
Regards,
Raghav

DME File Generation for Thailand

Hi Gurus,
I would like to know which DME File format is using for Thailand.
I need to generate DME file for the Thailand country format while running APP F110.
Thanks in Advance.
Pavan

Hi,
If you are using PMW for DME generation than please go to DMEE transaction code and in tree property node at File Data tab select radio button 'Allow Only These Charact.' and don't specify this characters in the field against Character Definition.
For blank space control it with Length and Conv. function in the segment definition.
Regards,
Anand Raichura

SAP Payment Medium File for China

Hi Guys,
Could you advise on this please?
We need to create a payment file from SAP for sending to Bank of America in China.
The payment file needs to be in the following format:
PAYMENT","HEADER","07192005","MTI-MTIW0000","0009"
"PAYMENT","FXW","31","07252005","DEBIT","9976.37","CNY","国家高新
"PAYMENT","TRAILER",
Can you advise please
(1) which payment medium program do you advise to use in order to generate this DME file for China? Is it payment program RFFOM100?
(2) are there other payment programs within SAP for China that can handle different file formats specified by the banking partner? Reading the RFFOM100 documentation, the format above does not seem to be accomodated Bank RFFOM100:
Thanks for any guidance you can offer here.
Michael

Refer OSS Note 164888. You will find an answer to your question.

XML file for SEPA Credit transfer

Hi All,
I am working in ECC 6.0. The system was configured to generate XML files for credit transfer as per SEPA guidelines. The files are being created in the application layer. But the line length is being restricted to 255 characters. As per the specifications of a XML file in apllication layer. all information should be contained in one single line.
Secondly the job log for the payment medium creation program contains the below mentioned line among others -
"Incorrect Print Parameter" of message class "0K", message no. 091and message ID I
Can anybody tell me what is going wrong?

HI,
Can you please help me in solving the issue when using the PMW format SEPA_CT.
My co. code currency is EUR and when paying the invoice which is in GBP i am not able to get the currency EUR in the DME file generated by the payment run instead I am getting the currency GBP.
As per the SEPA concept evey payment will be in EUR irrespective of the currency in which the invoice is raised. So please let me know what needs to be done to get the local currency EUR amount the DME file for the payment made against invoice raised in GBP...
Thanks in Advance..
Regards
Sanjeev

F110 - How to prevent multiple creation of DME file?

Hello,
I need to prevent multiple creation of DME file for the same Payment Run (after it has been created once).
"Printout" bottom creates DME file and Payment Advice any time you trigger it.
I'm searching for some User Exit / BAdi / Function that will help me to add ABAP code that will check if DME file has already been created.
Thank You in Advance

Hello,
Please check if the flag "Create payment medium" is not flagged at the proposal and the payment run file.
If it is flagged the payment file will be generated. Also when you press the print out button, the print program will be called and the system will try to created a new payment file.
In order to avoid duplicated payments you should consider using the flag 'Payment Document Validation" in your print program.
If the 'Payment Document Validation' parameter is not set ON, documents already processed for payment can be selected and paid again in a subsequent payment run, when posting terminations have occurred.
Please refer to SAP Knowledge Base Article 1713825 in order to activate Payment Document Validation.
Another option is to suppress the"Create Payment Medium" flag at Proposal Run.
In this case you should check the following information:
Please restrict the activity 15 of object F_REGU_BUK in the user
profile/role
You may also refer to the available activities on this:
- 02 Edit parameters
- 03 Display parameters
- 11 Execute proposal
- 12 Edit proposal
- 13 Display proposal
- 14 Delete proposal
- 15 Create payment medium proposal
- 21 Execute payment run
- 23 Display payment run
- 24 Delete payment run payment data
- 25 Create payment media of payment run
- 26 Delete payment orders of payment run
- 31 Print payment medium manually
Kind Regards,
Fernando Evangelista

DME file for RFFOUS_C

Similar Messages

Maybe you are looking for