DME file is not generated

Hi gurus
i have exeucte payment run and document posted but DME fileis not genereate
any help
thanks
Sunitha

Did you also confirm that on that on the Printout/data medium tab that your program RFF0AVIS (if you use PMW) has a variant or if you use RFFOUS_T that it has a variant?
So when you go to F110, the Additional Log tab, and click on the Payment run log button, can you see a list of Document numbers posted by the payment program (for us they typically begin with a 2 - the clearing doc number)??
Then have you confirmed in your directory that the file does not exist??  For us, the DME file is stored in tcode AL11 and then we go to the specified directory to confirm that no file was created.
If no file was created and you do see clearing doc numbers, you could try reversing one of the clearing doc number via FBRA and then running the payment program for just that one .  Before doing so, see if anyone else has any ideas.
Now we have had odd and RARE situations in production when our DME files were not created due to conflicting payroll processing or network errors.  In those cases where we confirmed that clearing doc numbers were posted and no DME file was produced on the server, we had to use FBRA and reverse all the clearing docs and just rerun the payment program again.
P.S. We however don't produce IDOCs from our payment program.
Good luck,
Cindy

Similar Messages

  • Error creating AIR file: could not generate timestamp

    I have been getting this error the last few days.
    Error creating AIR file: could not generate timestamp:
    sun.security.validator.BalidatorException:PKIX path building failed:
    sun.security.provider.certpath.SunCertPathBuilderException: unable to find
    valid certificatio path to requested target.
    https://timestamp.geotrust.com/tsa
    I found one thread saying this url must be accessible but when I go there I get "404 -- page not found".
    Since this was working now it is not I'm looking for a direction.

    Hey Karthik,
    First of all, are you using ECLIPSE? What is your development
    Environment. I had run into same issue, after hours of trying
    different things, I installed the FLEX BUILDER and was able to
    create the application without any issues. I have also noticed that
    FLEX BUILDER works more smoothly than Eclipse and since then I have
    been developing within FB.
    Thanks.

  • Planning File Entry not generated for items releveant to PM

    MRP procedure used for material is reorder based planning , in April -09 the stock for this material is consumed and becomes
    zero (reorder point is 8 ,Maximum Stock Level is 8 ) and after that in MRP run the requirement is not generated .
    But as per the setting of reorder point PR should be initiated.
    When checked the MD21 , material is not flagged ,
    I want to know the specific reason why only  this material is not flagged for MRP run.
    What all settings i can check ?
    MATERIAL TYPE : YMRO   OP Maint/ Repair/OperSup
    Lot size : Repl. to max. stock level after cov. req
    Procurement type   :  F

    Hi,
    Run the reports MDRE & MDAB to ensure the planning file entries are correct.
    About your query what might have caused a entry not to be in planning file, well it could be many. So run the above reports & then run MRP & check the results.
    Regards,
    Vivek

  • Advising record (ADV - HSBC form) in DME file could not get email address

    Dear all,
    I have problems with DME file that Advising record could not get email that is maintained in vendor master data.
    Standard communication methods in vendor master data must be Emails.
    We use exit module to get this email for below fields:
    Email chnl se. flag
    Email address
    T-code DMEE -> Advising record
    (Attributes tab: Mapping procedures is Exit module.
    Source tab: value was entered for Exit function)
    We test once and got the expected result: email shown on DME file, in advising record.
    However, as I rechecked recently, we have no email shown (though Constant value 'ADV' shown).
    The form is active by the way.
    I do not know if I miss anything in configuration.
    Please advise.
    Thank you very much.
    Rgds,
    Linh

    Hello Linh,
    Did you manage to resolve this. I'm facing the same problem, not able to get the email address.
    Can you please provide the function module you used.
    Thanks,
    Srini

  • File is not generated using UTL_FILE

    MY_DIR in dba_directories is /usr/tmp. /usr/tmp has read, write privilege to apps.
    DECLARE
    fHandler UTL_FILE.FILE_TYPE;
    BEGIN
    fHandler := UTL_FILE.FOPEN('MY_DIR', 'myfile', 'w');
    UTL_FILE.PUTF(fHandler, 'Look ma, I''m writing to a file!!!n');
    UTL_FILE.FCLOSE(fHandler);
    EXCEPTION
    WHEN utl_file.invalid_path THEN
    raise_application_error(-20000,
    'ERROR: Invalid path. Create directory or set UTL_FILE_DIR.');
    END;
    ERROR at line 1:
    ORA-20000: ERROR: Invalid path. Create directory or set UTL_FILE_DIR.ORA-29280: invalid directory
    path
    ORA-06512: at line 9
    DECLARE
    fHandler UTL_FILE.FILE_TYPE;
    BEGIN
    fHandler := UTL_FILE.FOPEN('/usr/tmp', 'myfile', 'w');
    UTL_FILE.PUTF(fHandler, 'Look ma, I''m writing to a file!!!n');
    UTL_FILE.FCLOSE(fHandler);
    EXCEPTION
    WHEN utl_file.invalid_path THEN
    raise_application_error(-20000,
    'ERROR: Invalid path. Create directory or set UTL_FILE_DIR.');
    END;
    PL/SQL procedure successfully completed.
    Tried giviing .txt,.dat extension to myfile ,UTL_FILE.PUT_LINE also. But file is not getting generated.
    Thanks
    kumar

    Hello,
    You may execute the following query so as to check your directories:
    select * from dba_directories;You should have an Oracle directory which point to "/usr/tmp".
    If yes, you should use the corresponding Oracle Directory name instead of "/usr/tmp".
    Else, you may create an Oracle Directory which point to "/usr/tmp" and GRANT READ, WRITE access to APPS.
    More over, if you want to use Oracle Directory you should remove the parameter utl_file_dir or set it to "*".
    In your example, it seems that you set the parameter utl_file_dir to "/usr/tmp" so you cannot
    use Oracle Directories.
    Hope this help.
    Best regards,
    Jean-Valentin
    Edited by: Lubiez Jean-Valentin on Feb 9, 2010 7:26 PM

  • PDF file is not generating for Billing Document for Invoice

    Hi all,
    We have upgraded our system into ECC6.0 from 4.7 version. During our Testing time, we have found the following Bug:
    Bug: Not possible to get output in pdf format for Invoice type(TR code: VF02) except for all it is generating PDF output.
    Can anybody help me out to find the route cause for this problem.
    Regards,
    Murali

    Hi,
    For one Billing-Invoice type , PDF is not generating. But it is generating for other Invoices.
    So should i need to go through the Printer settings?
    Regards,
    Murali.

  • Generating dme file

    hi all
    im having a problem with generating the dme file.
    while paying the open items through app,dme file is not generated.
    plz tell the config related to dme file.no error mesg is displayed.
    waiting.....

    Hi Ezhil,
    Generally the output for any payment can be a Printout or a DME File. The DME file will either be written to a specific path on application server or sent out immediately depnding on the config you have in FBZP. You will be able to view the output of the DME in the F110 transaction for the required Payment run .
    Did you read the documentation available with the Program? The Payment Program documentation provided by SAP is quite good, Please check the documentation and let us know if you have any specific queries.
    Regards
    Prasuna.

  • Reasons for not creating a DME file in the payment program (F110)?

    Hi,
    I am using the payment program F110 for customer payments.
    A payment run was carried out:
    Parameters have been entered. Payment proposal has been created. Payment run has been carried out. Posting orders: 17 generated, 17 completed.
    However, the DME file was not created.
    What could be the reason?
    Thank you.
    Kind regards,
    Linda

    Solved. 
    Someone has changed the variant of the payment program.
    The DME file name had disappeared.

  • Bank Account Details in DME file generated by F110 APP

    Hi All,
    I am executing the Automatic Payment Program for posting incoming payments with payment method as "Direct Debit". In the parameters the customer number is entered. The same customer is also a vendor. But the bank details for its customer master are different than those in its vendor master. While the APP is executed the DME file which is generated is displaying the bank details from the vendor master record but I want it to display the bank details from the customer master record. Can anyone inform me as to how this problem can be fixed please?
    Regards,
    Sameer

    Hi,
    You can try developing an exit module using ABAP help. Care has to be taken that it is used only for the incoming payment method and not for all.
    Thanks and Regards,
    Anit

  • Problem-Starting InDesign Server for use with CORBA / Java and IOR file not generated

    I'm trying to start Indesign Server cs3 for use with Corba, as per the document the server should generate the start-up message like this..
    InDesignServer -iorfile c:\ior.txt -pluginpath Server\Corba
    [server] Writing IOR to ... and it should generate the IOR file
    but I'm getting the usual start-up message and the IOR file is not generated, I hope IOR file is required for Java component interaction with IDS, kindly help me to solve this.
    Thanks in advance.

    [From Susan Doan, who is having trouble posting to the forum today}:
    It looks like the example command line in the "Intro to InDesign Server" pdf is using curly quotes instead of straight quotes. If you copy the command from the pdf and paste it in your command shell, it won't work because of the curly quotes.
    You can run the command without the quotes as Rich has said, but, as will all command lines, if your path contains a space, you will need to put quotes (straight ones!) around the path.
    Thanks,
    Ole

  • DME files not getting stored in Appl Server .

    Hi All ,
        Please help me to solve this issue ..
         My DME files is not getting stored in the application server directory created by me , rather it is getting stored in the
        TEMP folder of the application server . How Can I store the DME output files in my application server , please let me know if I have missed any steps .
    Regards,
    Ranjita

    Hi,
    FUNCTION YFI_PAYMEDIUM_DMEE_20_F2.
    ""Global Interface:
    *"  IMPORTING
    *"     VALUE(I_FPAYH) LIKE  FPAYH STRUCTURE  FPAYH
    *"     VALUE(I_FPAYHX) LIKE  FPAYHX STRUCTURE  FPAYHX
    *"     VALUE(I_FORMAT_PARAMS) LIKE  FPM_SELPAR-PARAM
    *"     VALUE(I_FILENAME) LIKE  REGUT-FSNAM
    *"     VALUE(I_XFILESYSTEM) TYPE  DFILESYST
    *"  TABLES
    *"      T_FILE_OUTPUT STRUCTURE  FPM_FILE
    *"  CHANGING
    *"     REFERENCE(C_FILENAME) LIKE  REGUT-FSNAM
    put filename
      DATA: Y_FILENAME TYPE REGUT-FSNAM,
            T_FILENAME TYPE STANDARD TABLE OF REGUT-FSNAM WITH HEADER LINE,
    structures filled by application program
                L_FPAYH  TYPE FPAYH,
    *structure for bank data
      L_BANKDATA TYPE YFI_BANK_AD_DATA,
    *date
       W_DATE(10) TYPE C,
    *counter
       W_CHAR(3) TYPE N,
    *dot
       W_DOT(1) TYPE C VALUE '.',
       W_LEN TYPE I,
       W_POS TYPE I.
    fill strutures of payment documents
      L_FPAYH   = I_FPAYH.
    Get the Client code( Source Code )
    based on the Company code ,House Bank and Bank Id
      SELECT SINGLE * FROM YFI_BANK_AD_DATA
      INTO CORRESPONDING FIELDS OF L_BANKDATA
      WHERE Z_BUKRS  = L_FPAYH-ZBUKR AND
      Z_BANK = L_FPAYH-HBKID AND Z_BANKID = L_FPAYH-HKTID.
    *today's date
      W_DATE = SY-DATUM.
    *make file name as per bank
    IF L_FPAYH-HBKID cp 'HSP01*'.
    IF L_FPAYH-HBKID cp 'HS*'.
       CONCATENATE '/data/fi/epay/hsp01_int/' '%' L_BANKDATA-Z_CLIENTC(4) W_DATE6(2) W_DATE4(2) w_date(4) L_FPAYH-LAUFI
            '.___' INTO Y_FILENAME.
    CONCATENATE '/data/fi/epay/pearl2/' '%' L_BANKDATA-Z_CLIENTC(4) W_DATE6(2) W_DATE4(2) w_date(4) L_FPAYH-LAUFI
             '.___' INTO Y_FILENAME.
    ELSE.
       CONCATENATE '/data/fi/epay/icp01/' '%' L_BANKDATA-Z_CLIENTC(4) W_DATE6(2) W_DATE4(2) W_DATE+2(2) '.___' INTO Y_FILENAME.
      ENDIF.
    *is there any entry for given key
      SELECT COUNT( * ) FROM REGUT WHERE DWNAM LIKE Y_FILENAME .
    *if none
      IF SY-SUBRC <> 0.
    *this wud be first file - remove % from file name
        W_LEN = STRLEN( Y_FILENAME ) - 22.
        Y_FILENAME = Y_FILENAME+22(W_LEN).
       IF L_FPAYH-HBKID cp 'HSP01*'.
        IF L_FPAYH-HBKID cp 'HS*'.
         CONCATENATE '/data/fi/epay/hsp01_int/' Y_FILENAME INTO Y_FILENAME.
    CONCATENATE '/data/fi/epay/pearl2/' Y_FILENAME INTO Y_FILENAME.
       ELSE.
         CONCATENATE '/data/fi/epay/icp01/' Y_FILENAME INTO Y_FILENAME.
        ENDIF.
        SPLIT Y_FILENAME AT W_DOT INTO Y_FILENAME W_CHAR.
        W_CHAR = '001'.
    *if yes
      ELSE.
    *existing file name
        SELECT DWNAM FROM REGUT INTO TABLE T_FILENAME WHERE DWNAM LIKE Y_FILENAME
        AND DWNAM NE SPACE.
    *get file name with max counter
        LOOP AT T_FILENAME.
          Y_FILENAME = T_FILENAME.
          DO.
            SEARCH Y_FILENAME FOR '\'.
            IF SY-FDPOS = 0.
              EXIT.
            ELSE.
              W_POS = SY-FDPOS + 1.
              W_LEN = STRLEN( Y_FILENAME ) - W_POS.
              Y_FILENAME = Y_FILENAME+W_POS(W_LEN).
              MODIFY T_FILENAME FROM Y_FILENAME .
            ENDIF.
          ENDDO.
        ENDLOOP.
        SORT T_FILENAME DESCENDING.
        READ TABLE T_FILENAME INDEX 1.
        Y_FILENAME = T_FILENAME.
    *increment the counter by 1.
        SPLIT Y_FILENAME AT W_DOT INTO Y_FILENAME W_CHAR.
        TRY.
            W_CHAR = W_CHAR + 1.
          CATCH CX_SY_CONVERSION_NO_NUMBER.
    *-- Make it first file
           W_CHAR = '001'.
        ENDTRY.
      ENDIF.
    *put file name
      CONCATENATE Y_FILENAME  W_DOT  w_char INTO Y_FILENAME.
    *export to ABAP memory id will be used by filename node in header
      EXPORT Y_FILENAME TO MEMORY ID 'Y_DMEE_FILENAME'.
    CONCATENATE '/data/fi/' y_filename INTO y_filename.
      C_FILENAME = Y_FILENAME.
    *}   INSERT
    ENDFUNCTION.

  • Index file not generating

    Hi
    I am using the RoboHTML trial 9.0 version and imported a previous 8.0 help project file.  Everything seems fine except indexing.  The project shows having my index file from the previous project but my index file is not generating.  How can I use my existing index file and not have to create a new index file?
    Please help.
    thanks
    Caryn Drovie

    Have you tried ending the session with Control C ?

  • Dbc file not generating

    Hi all,
    Oracle application log in screen is not displaying .i checked in backend . after that i did not change any thing.
    After that i have run autoconfig.after that i have seen again
    DBC file is not generating when i was running autoconfig?

    I am unable to paste the log file.can u give me u r mail id .i am uploading the log file.to u r id.
    E:\oracle\viscomn\admin\scripts\VIS_vanwin23>call "e:\oracle\visappl\APPSORA.cmd"
    ECHO is off.
    ECHO is off.
    Sun 09/06/2009 11:22 AM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual C++ tools.
    APPSORA.cmd exiting with status 0
    SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:35 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    Error returned while running mwamscasvc.cmd
    ERRORCODE = 3 ERRORCODE_END
    .end std out.
    .end err out.
    Processing DriverFile = e:\oracle\visappl\cn\11.5.0\admin\driver\cntmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for CN_TOP
    instantiate file:
    source : e:\oracle\visappl\cn\11.5.0\admin\template\cnadmprf.sql
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\cnadmprf.sql
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\cnadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cnadmprf.sql
    setting permissions: 600
    instantiate file:
    source : e:\oracle\visappl\cn\11.5.0\admin\template\cnadmprf.cmd
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\cnadmprf.cmd
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\cnadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cnadmprf.cmd
    setting permissions: 700
    instantiate file:
    source : e:\oracle\visappl\cn\11.5.0\admin\template\cncmprf.sql
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\cncmprf.sql
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\cncmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cncmprf.sql
    instantiate file:
    source : e:\oracle\visappl\cn\11.5.0\admin\template\cncmprf.cmd
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\cncmprf.cmd
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\cncmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cncmprf.cmd
    AutoConfig Profile Phase
    Running Profile Process 1 of 2 for CN_TOP
    Executing script in InstantiateFile:
    e:\oracle\viscomn\admin\install\VIS_vanwin23\cnadmprf.cmd
    script returned:
    Sun 09/06/2009
    11:22 AM
    ECHO is off.
    ECHO is off.
    Sun 09/06/2009 11:22 AM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual C++ tools.
    APPSORA.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : e:\oracle\visora\8.0.6"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
    " LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
    "Running SQL script "
    SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:36 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    "Error returned while running cnadmprf.cmd"
    ERRORCODE = 3 ERRORCODE_END
    .end std out.
    .end err out.
    AutoConfig Profile Phase
    Running Profile Process 2 of 2 for CN_TOP
    Executing script in InstantiateFile:
    e:\oracle\viscomn\admin\install\VIS_vanwin23\cncmprf.cmd
    script returned:
    Sun 09/06/2009
    11:22 AM
    ECHO is off.
    ECHO is off.
    Sun 09/06/2009 11:22 AM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual C++ tools.
    APPSORA.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : e:\oracle\visora\8.0.6"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
    " LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
    " CN_TOP : e:\oracle\visappl\cn\11.5.0"
    "Running SQL script "
    SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:36 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    "Error returned while running cncmprf.cmd"
    ERRORCODE = 3 ERRORCODE_END
    .end std out.
    .end err out.
    Processing DriverFile = e:\oracle\visappl\csi\11.5.0\admin\driver\csitmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for CSI_TOP
    instantiate file:
    source : e:\oracle\visappl\csi\11.5.0\admin\template\csiadmprf.sql
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\csiadmprf.sql
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\csiadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\csiadmprf.sql
    setting permissions: 600
    instantiate file:
    source : e:\oracle\visappl\csi\11.5.0\admin\template\csiadmprf.cmd
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\csiadmprf.cmd
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\csiadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\csiadmprf.cmd
    setting permissions: 700
    AutoConfig Profile Phase
    Running Profile Process 1 of 1 for CSI_TOP
    Executing script in InstantiateFile:
    e:\oracle\viscomn\admin\install\VIS_vanwin23\csiadmprf.cmd
    script returned:
    Sun 09/06/2009
    11:22 AM
    ECHO is off.
    ECHO is off.
    Sun 09/06/2009 11:22 AM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual C++ tools.
    APPSORA.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : e:\oracle\visora\8.0.6"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
    " LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
    "Running SQL script "
    SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:37 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    "Error returned while running csiadmprf.cmd"
    ERRORCODE = 3 ERRORCODE_END
    .end std out.
    .end err out.
    Processing DriverFile = e:\oracle\visappl\wip\11.5.0\admin\driver\wiptmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for WIP_TOP
    instantiate file:
    source : e:\oracle\visappl\wip\11.5.0\admin\template\wipadmprf.sql
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\wipadmprf.sql
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\wipadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\wipadmprf.sql
    setting permissions: 600
    instantiate file:
    source : e:\oracle\visappl\wip\11.5.0\admin\template\wipadmprf.cmd
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\wipadmprf.cmd
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\wipadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\wipadmprf.cmd
    setting permissions: 700
    AutoConfig Profile Phase
    Running Profile Process 1 of 1 for WIP_TOP
    Executing script in InstantiateFile:
    e:\oracle\viscomn\admin\install\VIS_vanwin23\wipadmprf.cmd
    script returned:
    Sun 09/06/2009
    11:22 AM
    ECHO is off.
    ECHO is off.
    Sun 09/06/2009 11:22 AM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual C++ tools.
    APPSORA.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : e:\oracle\visora\8.0.6"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
    " LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
    "Running SQL script "
    SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:37 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    "Error returned while running wipadmprf.cmd"
    ERRORCODE = 3 ERRORCODE_END
    .end std out.
    .end err out.
    Processing DriverFile = e:\oracle\visappl\cse\11.5.0\admin\driver\csetmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for CSE_TOP
    instantiate file:
    source : e:\oracle\visappl\cse\11.5.0\admin\template\cseadmprf.sql
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\cseadmprf.sql
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\cseadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cseadmprf.sql
    setting permissions: 600
    instantiate file:
    source : e:\oracle\visappl\cse\11.5.0\admin\template\cseadmprf.cmd
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\cseadmprf.cmd
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\cseadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cseadmprf.cmd
    setting permissions: 700
    AutoConfig Profile Phase
    Running Profile Process 1 of 1 for CSE_TOP
    Executing script in InstantiateFile:
    e:\oracle\viscomn\admin\install\VIS_vanwin23\cseadmprf.cmd
    script returned:
    Sun 09/06/2009
    11:22 AM
    ECHO is off.
    ECHO is off.
    Sun 09/06/2009 11:22 AM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual C++ tools.
    APPSORA.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : e:\oracle\visora\8.0.6"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
    " LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
    "Running SQL script "
    SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:38 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    "Error returned while running cseadmprf.cmd"
    ERRORCODE = 3 ERRORCODE_END
    .end std out.
    .end err out.
    Processing DriverFile = e:\oracle\visappl\eam\11.5.0\admin\driver\eamtmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for EAM_TOP
    instantiate file:
    source : e:\oracle\visappl\eam\11.5.0\admin\template\eamadmprf.sql
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\eamadmprf.sql
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\eamadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\eamadmprf.sql
    setting permissions: 600
    instantiate file:
    source : e:\oracle\visappl\eam\11.5.0\admin\template\eamadmprf.cmd
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\eamadmprf.cmd
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\eamadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\eamadmprf.cmd
    setting permissions: 700
    AutoConfig Profile Phase
    Running Profile Process 1 of 1 for EAM_TOP
    Executing script in InstantiateFile:
    e:\oracle\viscomn\admin\install\VIS_vanwin23\eamadmprf.cmd
    script returned:
    E:\oracle\viscomn\admin\scripts\VIS_vanwin23>echo off
    Sun 09/06/2009
    11:22 AM
    ECHO is off.
    ECHO is off.
    Sun 09/06/2009 11:22 AM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual C++ tools.
    APPSORA.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : e:\oracle\visora\8.0.6"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
    " LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
    "Running SQL script "
    SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:39 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    "Error returned while running eamadmprf.cmd"
    ERRORCODE = 3 ERRORCODE_END
    .end std out.
    .end err out.
    Processing DriverFile = e:\oracle\visappl\imt\11.5.0\admin\driver\imttmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for IMT_TOP
    Processing DriverFile = e:\oracle\visappl\fte\11.5.0\admin\driver\ftetmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for FTE_TOP
    instantiate file:
    source : e:\oracle\visappl\fte\11.5.0\admin\template\fteadmprf.sql
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\fteadmprf.sql
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\fteadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\fteadmprf.sql
    setting permissions: 600
    instantiate file:
    source : e:\oracle\visappl\fte\11.5.0\admin\template\fteadmprf.cmd
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\fteadmprf.cmd
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\fteadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\fteadmprf.cmd
    setting permissions: 700
    AutoConfig Profile Phase
    Running Profile Process 1 of 1 for FTE_TOP
    Executing script in InstantiateFile:
    e:\oracle\viscomn\admin\install\VIS_vanwin23\fteadmprf.cmd
    script returned:
    11:22 AM
    ECHO is off.
    ECHO is off.
    Sun 09/06/2009 11:22 AM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual C++ tools.
    APPSORA.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : e:\oracle\visora\8.0.6"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
    " LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
    "Running SQL script "
    SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:39 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    "Error returned while running fteadmprf.cmd"
    ERRORCODE = 3 ERRORCODE_END
    .end std out.
    The process tried to write to a nonexistent pipe.
    .end err out.
    Processing DriverFile = e:\oracle\visappl\ont\11.5.0\admin\driver\onttmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for ONT_TOP
    instantiate file:
    source : e:\oracle\visappl\ont\11.5.0\admin\template\ontadmprf.sql
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\ontadmprf.sql
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\ontadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\ontadmprf.sql
    setting permissions: 600
    instantiate file:
    source : e:\oracle\visappl\ont\11.5.0\admin\template\ontadmprf.cmd
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\ontadmprf.cmd
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\ontadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\ontadmprf.cmd
    setting permissions: 700
    AutoConfig Profile Phase
    Running Profile Process 1 of 1 for ONT_TOP
    Executing script in InstantiateFile:
    e:\oracle\viscomn\admin\install\VIS_vanwin23\ontadmprf.cmd
    script returned:
    Sun 09/06/2009
    11:22 AM
    ECHO is off.
    ECHO is off.
    Sun 09/06/2009 11:22 AM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual C++ tools.
    APPSORA.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : e:\oracle\visora\8.0.6"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
    " LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
    "Running SQL script "
    SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:40 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    "Error returned while running ontadmprf.cmd"
    ERRORCODE = 3 ERRORCODE_END
    .end std out.
    .end err out.
    Processing DriverFile = e:\oracle\visappl\ar\11.5.0\admin\driver\artmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for AR_TOP
    instantiate file:
    source : e:\oracle\visappl\ar\11.5.0\admin\template\aradmprf.sql
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\aradmprf.sql
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\aradmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\aradmprf.sql
    setting permissions: 600
    instantiate file:
    source : e:\oracle\visappl\ar\11.5.0\admin\template\aradmprf.cmd
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\aradmprf.cmd
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\aradmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\aradmprf.cmd
    setting permissions: 700
    AutoConfig Profile Phase
    Running Profile Process 1 of 1 for AR_TOP
    Executing script in InstantiateFile:
    e:\oracle\viscomn\admin\install\VIS_vanwin23\aradmprf.cmd
    script returned:
    Sun 09/06/2009
    11:22 AM
    ECHO is off.
    ECHO is off.
    Sun 09/06/2009 11:22 AM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual C++ tools.
    APPSORA.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : e:\oracle\visora\8.0.6"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
    " LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
    "Running SQL script "
    SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:40 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    "Error returned while running aradmprf.cmd"
    ERRORCODE = 3 ERRORCODE_END
    .end std out.
    .end err out.
    Processing DriverFile = e:\oracle\visappl\ahl\11.5.0\admin\driver\ahltmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for AHL_TOP
    instantiate file:
    source : e:\oracle\visappl\ahl\11.5.0\admin\template\ahladmprf.sql
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\ahladmprf.sql
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\ahladmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\ahladmprf.sql
    setting permissions: 600
    instantiate file:
    source : e:\oracle\visappl\ahl\11.5.0\admin\template\ahladmprf.cmd
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\ahladmprf.cmd
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\ahladmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\ahladmprf.cmd
    setting permissions: 700
    AutoConfig Profile Phase
    Running Profile Process 1 of 1 for AHL_TOP
    Executing script in InstantiateFile:
    e:\oracle\viscomn\admin\install\VIS_vanwin23\ahladmprf.cmd
    script returned:
    Sun 09/06/2009
    11:22 AM
    ECHO is off.
    ECHO is off.
    Sun 09/06/2009 11:22 AM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual C++ tools.
    APPSORA.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : e:\oracle\visora\8.0.6"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
    " LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
    "Running SQL script "
    SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:41 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    "Error returned while running ahladmprf.cmd"
    ERRORCODE = 3 ERRORCODE_END
    .end std out.
    .end err out.
    Processing DriverFile = e:\oracle\visappl\ozf\11.5.0\admin\driver\ozftmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for OZF_TOP
    instantiate file:
    source : e:\oracle\visappl\ozf\11.5.0\admin\template\ozfadprf.sql
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\ozfadprf.sql
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\ozfadprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\ozfadprf.sql
    setting permissions: 600
    instantiate file:
    source : e:\oracle\visappl\ozf\11.5.0\admin\template\ozfadprf.cmd
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\ozfadprf.cmd
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\ozfadprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\ozfadprf.cmd
    AutoConfig Profile Phase
    Running Profile Process 1 of 1 for OZF_TOP
    Executing script in InstantiateFile:
    e:\oracle\viscomn\admin\install\VIS_vanwin23\ozfadprf.cmd
    script returned:
    Sun 09/06/2009
    11:22 AM
    ECHO is off.
    ECHO is off.
    Sun 09/06/2009 11:22 AM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual C++ tools.
    APPSORA.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : e:\oracle\visora\8.0.6"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
    " LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
    "Running SQL script "
    SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:41 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    "Error returned while running ozfadprf.cmd"
    ERRORCODE = 3 ERRORCODE_END
    .end std out.
    .end err out.
    Processing DriverFile = e:\oracle\visappl\ies\11.5.0\admin\driver\iestmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for IES_TOP
    instantiate file:
    source : e:\oracle\visappl\ies\11.5.0\admin\template\cooper.cmd
    dest : e:\oracle\visappl\ies\11.5.0\admin\install\VIS_vanwin23\cooper.cmd
    backup : e:\oracle\visappl\ies\11.5.0\admin\install\VIS_vanwin23\cooper.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cooper.cmd
    Processing DriverFile = e:\oracle\visappl\csd\11.5.0\admin\driver\csdtmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for CSD_TOP
    instantiate file:
    source : e:\oracle\visappl\csd\11.5.0\admin\template\csdadmprf.sql
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\csdadmprf.sql
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\csdadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\csdadmprf.sql
    setting permissions: 600
    instantiate file:
    source : e:\oracle\visappl\csd\11.5.0\admin\template\csdadmprf.cmd
    dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\csdadmprf.cmd
    backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\csdadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\csdadmprf.cmd
    setting permissions: 700
    AutoConfig Profile Phase
    Running Profile Process 1 of 1 for CSD_TOP
    Executing script in InstantiateFile:
    e:\oracle\viscomn\admin\install\VIS_vanwin23\csdadmprf.cmd

  • Control file in sapmnt is not generated

    Hi
    In usr/sap<SID>/SYS/Global/sapmnt control file size 1 mb is not generating.
    can any one help me why this file is not generating ..how can we fix this issue.
    regards
    Indshree

    Dear  Indshree,
    What is the SAP Product, OS and DB?
    this file is generating of file size 1 mb ..this is for CI and SCS.
    You mean to say control file for SAP CI ...I never heard about that.
    More over what is the error and where you are getting this error text?
    Regards,

  • SEPA direct debit file not generated

    Hi all!
    SBO 8.81 PL08, Localization: Austria
    I tried to generate a SEPA direct debit file. All preparations are done according to the documents from the landing page (MandatID, Date of signature, etc.). The file was not generated because of the following error message in payment run window:
    In German:
    I'm not sure which value is missing and which field in SBO has to be filled. I hope anybody can help. The customer has hundreds of payments, where we have to use SEPA standard.
    Thanks in advance,
    Robert

    The Creditor ID belongs to the field ID No. 2 on General tab in the business partner master data.
    Regards, Robert

Maybe you are looking for

  • Macbook Pro jack Audio problem

    Hi, suddenly the audio output from the jack of my macbook pro 13" is "distorted ". everything happened from one day to another. I did not do anything special, I tried to try different audio outputs to see that it was a cable problem, but as occurs wi

  • How to keep track of the users who are all currently logged in

    Hi All, I have basic knowledge of Session and Servlets. I am wondering how to keep track of the users who are all currently logged in. There should be some way of achieving it. I thought of it and come up with having an Application variable that hold

  • Exporting to PDF from Freehand error

    Hi, I have been trying to export a freehand presentation to a PDF file, i have tried to do a simple export aswell as printing to PDF, in both cases the resulting PDF file becomes disconfigured with Text comming out of the background boxes. however if

  • Can I download Sun One Application Server 7(standard Edition)on Windows XP

    Hi, I have Windows XP Home Edition on my system.I am planning to develop and test some applications on Sun One application Server 7.Will the server support XP platform?Any help is appreciated.. Thanks, Radhika

  • Erase & sync??

    I got a new pc a few days ago.  It won't let me move any songs from itunes to my iphone.  I ticked manually manage. It is telling me to erase & sync. I only had my iphone authorized on the old pc which we no longer have.  The kids ipod touches are fi