DMEE - Error with event 25 open/close file
Hi All,
I have created a new format in DMEE (and in the customizing), I generate a flat file with F110.
I have created an event 00 and 25 to have a new file when the Bill of Exchange Due Date (FPAYH-WEFAE) changed.
In the DMEE, at header level, in the tabstrip "Sort/key field", in the first step, I put FPAYH-WAFAE as key field and "no sorting" isn't flagged.
When I have 2 differents Bill of Exchange Due Date in the same payment, I obtain only 1 file !
Thank you very much for your help !
Best regards,
Odile Mayeur.
Hi Alexandra,
You can catch the exception in Exceptions part and close the file. Something like,
DECLARE
F_VersandZahlen CLIENT_TEXT_IO.FILE_TYPE;
BEGIN
F_VersandZahlen := CLIENT_TEXT_IO.FOPEN (F_Dateiname,'w');
<do your processing>
EXCEPTION
WHEN OTHERS THEN
CLIENT_TEXT_IO.FCLOSE(F_VersandZahlen);
END;-Arun
Similar Messages
-
having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas
Hi George ,
Is it happening with all the PDF' or any specific one?
Could you please share the error message so that we can replicate at our end ?
Try repairing reader once and see if that fixes the issue.
Launch Reader>Navigate to Help>Repair Adobe Reader Installation
Regards
Sukrit Dhingra -
Photoshop cse 5 error "Could not open scratch file because disk is not available" using Maverick
I am getting the following error:
"Could not open scratch file because disk is not available"
I am using Adobe Photoshop CS5 on the Mac Operating System "Maverick". The application is currently loaded on an external bootable drive. I created an external bootable drive using "Disk Utilities". I've changed the directory /private/ to 777 using the following command "chmod -R 777 /private/". I have created the external bootable drive in the event that my current internal drive crashes. I would just then have to swap the drives out. I created the external bootable drive using DYNEX SATA Hard drive enclosure.
Photoshop General DiscussionI searched around and found the answer. My question was to specific. Jim Olvera had the same problem and this was the solution with the help of Adobe Support.
OS X Mavericks. I was able to resolve it after a chat discussion with Adobe support. It is indeed a permissions issue apparently, but not one that can be resolved with Disk Utility. I was able to change to another scratch disk by holding down "Command + Option" as I launched Photoshop, and that did it. Still can't use the previous disk as a scratch, though, even though permissions have been repaired.
JO
Thank you for your suggestion, but I could not even get to the point where "Photoshop" would even open up.
Thank you everyone! -
Cannot go on suspend with an open Excel file from network
Hi all,
I cannot go on suspend with an open Excel file with macro - from network.
The error msg is that I need to close all the open files first.
"Windows cannot go on standby because Microsoft Office documents or application components are being accessed from the network. You must close the open documents or exit the application before you can put the computer on standby"
The error msg will not appear when I use regular excel files, only with macro.
Any ideas?
Thanks.Hi,
In regarding of the issue, there are some reasons.
Firstly, if we got some error message like: "Cannot find the file 'C:\Folder\FileName.xls' .Make sure the path and filename are correct and that all required libraries are available."
Please try the steps:
Open Excel>Click on file>options>Advanced options>General tab>Uncheck the box “ignore other applications which use Dynamic Data Exchange (DDE).
Secondly, When we try to open a Office file, it'll create a temp file in the same directory. If we have no full permission with the folder and OneDrive, we also could not open it. Thus, we'd better make sure we
have full permission. Please try to use the administrator account to test.
Thirdly, please see the some general troubleshooting about Excel start issue:
http://support.microsoft.com/kb/280504
Hope it's helpful.
Regards,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]" -
ERROR: Unable to open TUXCONFIG file
Hi,
I installed and installed the following software successfully on Windows XP
Oracle WebLogic Server 11gR1 (10.3.1) Microsoft Windows
PeopleSoft Enterprise PeopleTools 8.50
PeopleSoft Enterprise Human Resources Management System 9.1 - Revision 2
Tuxedo 10gR3 for MS Windows Server 2003 w/MS VS 2005 (32-bit x86, AMD64/EM64T x64) 32-bit
i am at the point of installing the Application Server. Domain created sucessfully but i got boot errors as shown below.
I searched for the TUXCONFIG file but could not find it in the tuxedo installation folder.
I read that i have to create the TUXCONFIG,if missing, using tmloadcf.exe and the ubbconfig file, but the only UBBCONFIG file is located in "\samples\atmi\rpcsimp\" folder.
How do i create the TUXCONFIG file?
Did i miss something with the installation? What location should this file exist after your tuxedo installation?
thanks
K
BOOT ERRORS:
PeopleSoft Domain Boot Menu
Domain Name: hrms
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents an
d Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:588: ERROR: Unable to open TUXCONFIG file
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:6272: ERROR: Unable to get bulletin board par
ameters
115818.SU1491!tmboot.2652.1488.-2: CMDTUX_CAT:825: ERROR: Process PSWATCHSRV at SU1491 failed w
ith /T tperrno (TPESYSTEM - internal system error)
115818.SU1491!tmboot.2652.1488.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; init
iating user error handler
115821.SU1491!BBL.2956.4352.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
115825.SU1491!PSADMIN.3088: End boot attempt on domain hrms
Edited by: user2932595 on Apr 17, 2010 1:17 PM
Edited by: user2932595 on Apr 17, 2010 1:21 PMHi
The TUXCONFIG file normally is created automatically when you create your domain.
In this case I think you ran into trouble because the path of installation is too long!
Note the error in your log:
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents and Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
Your path is 69 chars long!
I would suggest that you re-try the configuration with a shorter tuxedo and PS_HOME: perhaps in the root directory (c:\PSHOME)
In the past I've also noticed that installations have problems with paths that have spaces - ex: 'Documents and settings' , so I would avoid that as well.
Edited by: Alternate on Apr 19, 2010 2:00 AM -
Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>
<!-- Generated by Oracle Reports version 6.0.8.27.0 -->
<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>
<!-- Generated by Oracle Reports version 6.0.8.27.0 -->
<NARLGLR005>
<LIST_G_PLAN_CODE>
<G_PLAN_CODE>
<PLAN_CODE>03101C3003</PLAN_CODE>
<PLAN_NAME>03101C3003_test</PLAN_NAME>
<PLAN_EM>John</PLAN_EM>
<PLAN_START_DATE>101.09.01</PLAN_START_DATE>
<PLAN_END_DATE>102.08.31</PLAN_END_DATE>
<PLAN_HOSTS>abc_super</PLAN_HOSTS>
<LIST_G_PURPOSE>
<G_PURPOSE>
<PURPOSE_CODE>11600000</PURPOSE_CODE>
<PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
<LIST_G_PURPOSE_CODE>
<G_PURPOSE_CODE>
<BUDGET_AMOUNT>0</BUDGET_AMOUNT>
<REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
<TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
<REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
<TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
<TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
<TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
</G_PURPOSE_CODE>
</LIST_G_PURPOSE_CODE>
<CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
<CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
<CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
<CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
<CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
<CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
<CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
</G_PURPOSE>
</LIST_G_PURPOSE>
<LIST_G_PLAN_SUBSQL2>
<G_PLAN_SUBSQL2>
<GL_DATE>31-07-12</GL_DATE>
<NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
<AP_UNAPP></AP_UNAPP>
<PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
<PLAN_CODE1>03101C3003</PLAN_CODE1>
<PLAN_EM1>Elly</PLAN_EM1>
<PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
<PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
<PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
<REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
<DESCRIPTION>101 year</DESCRIPTION>
<CF_GL_DATE>101.7.31</CF_GL_DATE>
</G_PLAN_SUBSQL2>
</LIST_G_PLAN_SUBSQL2>
<CF_START_DATE1>99.1</CF_START_DATE1>
<CF_END_DATE1>102.11</CF_END_DATE1>
<CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
<CF_OU_NAME1>IT Department</CF_OU_NAME1>
<CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
<CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
<CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
<CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
<CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
<CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
<CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
<CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
<CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
<CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
</G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support -
When package app with the new AIR 16.0 build 245 and ANE, the following error occur.
ld: Error: can't open -non_global_symbols_no_strip_list file: ......aot/lib/local_nostrip.arm-air.txtHi DigiCrafts,
It seems you are doing something wrong at your end. I have used the swf and ane provided by you and I am able to create an ipa. For your reference I am pasting the command I Used.
~/archive_air_16.0_with_asc2_drm_sdk/bin/adt -package -target ipa-app-store -provisioning-profile <abcd.mobileprovision> -storetype pkcs12 -keystore <abcd.p12> -storepass <password> Temp.ipa app.xml ShipSim.swf -extdir /Users/abhisek/Downloads/ane-error/bin/ -
Gerring Error -"Could not open command file"
Hi All,
I'm using Business Object Data services XI 4.0 .When I executes the job it given an error -"Could not open command file "
so if anyone know the solution then please let me know.
Thanks
Rajeev kumar
SAP-BODI DeveloperThe -compat=4 (and the default -compat=5) compilation modes are not related to the compiler version. All compiler versions from 5.0 (1998) through 5.10 (2009) have these options. The C++ Migration Guide
[http://docs.sun.com/app/docs/doc/819-5266]
explains the differences in detail between -compat=4 and -compat=5, with examples of how to make old code compatible with standard C++.
There is no compiler version 7. Perhaps you are thinking of the Sun Studio release. There is a Sun Studio 7 (containing C++ 5.4), but it is End Of Life, no longer available for purchase, and is not supported on Solaris 10. The recent releases are these:
Sun Studio 11, C++ 5.8, supports Solaris 8, 9, 10
Sun Studio 12, C++ 5.9, supports Solaris 9, 10, Open Solaris, Linux
Sun Studio 12 update 1, C++ 5.10, supports Solaris 10, Open Solaris, Linux
(Sun Studio 12 update 1 should be released next week. Watch this forum for an announcement.)
Please run the command
CC -V
to find out your compiler version.
When compiling on Solaris, 32-bit compilation is the default. You don't get 64-bit compilation unless you ask for it, via the -xarch option on older compilers, or the -m64 option on current compilers. -
Hi Experts,
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAPHi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Hope this helps. points are welcome.
-K -
In PowerPoint 2013 on Windows 7 - 64 bit, when
File / Save as is selected, an error message comes up stating, "An error occurred while opening the file dialog. Please save your presentation, exit, and restart PowerPoint." This is an intermittent issue and also
affects Excel 2013. I have tried repairing it, done windows update and also uninstalled and reinstalled but no luck. I have researched this issue but it relates to Office 2007 and 2010 and the resolution does not support 2013.
Has anyone come across this issue? If so how did you resolve it?
Many thanks….Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support -
Re: fatal error LNK1181: cannot open input file"OLDNAMES.LIB
Hi,
May be it is because it appears twice on your script :
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
At 18:40 18/12/98 +0100, Hervé Depoorter wrote:
Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
>
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are asfollows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
>
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled
partition)
>
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tpstruct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
[email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>ex_rep_chan is dependent on the db library, which judging by your printout, has not finished building. Which is odd, since Visual Studio is usually smarter about dependencies. Just rebuild ex_rep_chan and you should be fine.
Lauren Foutz -
Fatal error LNK1181: cannot open input file"OLDNAMES.LIB-Reply
The OLDNAMES.LIB file should be in your Visual C++ library directory (eg c:\Program Files\DevStudio\VC\lib). If you reread TechNote 11431it explains how to set up your LIB environment variable so that the linker can find the appropriate files.
Regards
Mark Carruthers
20th Century Fox
Hervé Depoorter <[email protected]> 12/18/98 09:40am >>>
Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are as follows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled partition)
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tp struct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>ex_rep_chan is dependent on the db library, which judging by your printout, has not finished building. Which is odd, since Visual Studio is usually smarter about dependencies. Just rebuild ex_rep_chan and you should be fine.
Lauren Foutz -
Fatal error LNK1181: cannot open input file"OLDNAMES.LIB
Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are as follows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled partition)
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tp struct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hussein,
Please find below the requested information,
1. Path variable value after sourcing the apps env file,
D:\oracle\VIS\apps\apps_st\appl>APPSVIS_oracletemp.cmd
ECHO is off.
ECHO is off.
Tue 11/23/2010 02:36 PM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual Studio 2008 x86 tools.
APPSORA.cmd exiting with status 0
D:\oracle\VIS\apps\apps_st\appl>
D:\oracle\VIS\apps\apps_st\appl>echo %path%
C:\VS2008\Common7\IDE;C:\VS2008\VC\BIN;C:\VS2008\Common7\Tools;C:\Windows\Micros
oft.NET\Framework\v3.5;C:\Windows\Microsoft.NET\Framework\v2.0.50727;C:\VS2008\V
C\VCPackages;C:\Program Files\\Microsoft SDKs\Windows\v6.0A\bin;D:\oracle\VIS\ap
ps\apps_st\appl\au\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\fnd\12.0.0\bin;D:\
oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin;D:\oracle\VIS\apps\tech_st\10.1.3\app
sutil\jdk\jre\bin;D:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-m
ulti-thread\;D:\oracle\VIS\apps\apps_st\comn\util\unzip\unzip;D:\oracle\VIS\apps
\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle
\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3\apps
util\jdk\jre\bin;C:\cygwin\bin;C:\Windows;C:\Windows\system32;D:\oracle\VIS\apps
\tech_st\10.1.3\ant\bin
D:\oracle\VIS\apps\apps_st\appl>
2. gnumake version is as follows,
D:\oracle\VIS\apps\apps_st\appl>gnumake --version
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for i386-pc-mingw32
D:\oracle\VIS\apps\apps_st\appl>
Thanks,
Rajesh. -
ERROR: Unable to open structapps file!
Hello,
Having modified the structapps.fm in FM10, I am getting the following error within a dialog when attempting to use the same file in FM8:
ERROR: Unable to open structapps file! FA_errno -43
Is FM not backward compatible ? OR do I need to reread the file in FM8
ThanksThe file should be saved in the FM version that you're using it in. You can't use any newer FM version file in any older version of FM, e.g. FM8 can't open any FM10 files (except for the MIF formats).
-
I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got the error message, Cannot Open Output File.
The file could be downloaded incorrectly. Could you redownload it again from [http://getfirefox.com http://getfirefox.com]?
Maybe you are looking for
-
ITunes could not connect to the iTunes Store "Error Message"
I recently added iTunes 7.6 to my Windows XP operating system at the same time when I added an *Ion USB Turntable (TTUSB).* I currently have the 80G iPod with the larger video screen. I added in the supplied software of the EZ Vinyl Converter. The so
-
Please see question. I have tried uninstalling and reinstalling, but with no success. Chrome and Int. Exp both work fine, but nothing comes up but a black screen covering most of my monitor in Firefix.
-
Hi, Can anyone pls let me know what are the commonly used font families for Lithuanian Language??? I need to use them in a SAP script.
-
XQuery elapsed time varies significantly
Dear all, I am a student and exploring xml databses for my final year project. I am executing xqueries on Berkley DB XML 2.4.13. The eapsed time on first execution is 3.343 seconds and upon immediate tries it is 0.844, 0.907, 0.86 seconds. The XQuery
-
Query for item warehouses stock in a row
hi all, How to retreive item warehouse stock in a row using query ? SELECT T0.ItemCode, T1.ItemName, T2.ItmsGrpNam, (Select WhsCode from OITW Where WhsCode=T0.WhsCode and ItemCode=T0.ItemCode) as 'Wh', (Select OnHand From OITW Where Whscode = T0.WhsC