DMEE format for tax reporting - USM1 - structure RFUMS_TAX_ITEM
Hi Sap experts,
I'm using the DMEE format USM1, in the structure RFUMS_TAX_ITEM, I don't understand following fields:
USER_FIELD_1 USER_FIELD_1 CHAR 40 0 First Field Entered by User
USER_FIELD_2 USER_FIELD_2 CHAR 40 0 Second Field Entered by User
USER_FIELD_3 USER_FIELD_3 CHAR 40 0 Third Field Entered by User
USER_FIELD_4 USER_FIELD_4 CHAR 40 0 Fourth Field Entered by User
USER_FIELD_A USER_FIELD_A CHAR 40 0 Field A Entered by User
USER_FIELD_B USER_FIELD_B CHAR 40 0 Field B Entered by User
How can we use those fields from BSEG / BKPF?
I would like to use those fields to put additional infomations for the file generation ?
Can you help me undestand how we can use / customise those fields?
Thanks!
Karim
Any idea, experts?
Similar Messages
-
How to track the history of supplier sites used for tax reporting (1099)
Hi,
Oracle financials doesn't allow two supplier sites setup as tax reportable sites (Unless one is inactive). Suppose if the supplier uses site1 for the year 2009 and site 2 for 2010 and now there is site3 setup as tax reportable. All three sites were setup in 2009 and all three sites are active. Supplier chosen different sites for each year as their tax reportable site.
How do we know which site oracle used to send 1099 for 2009 & 2010? How to track the history of supplier sites used for tax reporting (1099) in previous years?
Thanks in advance.
Regards,
RamWould the begin_date, end_date and status columns on HZ_PARTY_SITES_USES be any good? Our R12 installations is too new to have accumulated much data yet, but I would look in those columns first.
-
Payment medium DME format for Cheque Refunds
Dear Gurus,
We have cheque Refund process in ISU FICA, cheques are not printed in SAP, instead data will send to printwork bench via SAP PI to print the cheques and distribute to customers, which is handled by 3rd Party.
In order to send the data we may have to develop custom payment medium generate DME file, I wanted to check with you if any one has an idea is there any SAP standard payment medium format or function module which enables less development.
Would really appreciate your inputs and thoughts.
I checked by copying International Payment medium CHECK and activated DME format, however am unsuccessful on put. DME file generated with no Data.
Regards
Prab.Pravakar,
There is no standard DME format for Chq Refunds as far as I know.
In R/3, there is a standard program for Voyager<FCKR>. If you are looking for similar program in ISU, You need to go for customized program.
Also if you want Text file for your Chq Refund, suggest you look into the format of Legacy to understand the format.
If it is similar to BACS Refund file like VOL1, HDR1, HDR2 etc, you can copy the standard FMs
FKK_PAYMEDIUM_BACS_00
FKK_PAYMEDIUM_BACWAY_10
FKK_PAYMEDIUM_BACS_15
FKK_PAYMEDIUM_BACWAY_20
FKK_PAYMEDIUM_BACWAY_25
FKK_PAYMEDIUM_BACS_30
FKK_PAYMEDIUM_BACWAY_40
and tailor suit to your requirements. But again, if this is only a text file for SAP PI, suggest you to look what they are expecting from SAP <like Chq no, amount,date, Customer number>.
In that case you can write a program where it shall use the data base tables DFKKCR*, DFKKOP & FKKVKP.
Coming to FPY1, you may see a DME entry in FDTA for Check but you cannot view it there as it is only a correspondece. Alternatively you can view in Spool.
Hope this is clear and helps.
Rgds
Rajendra -
Default ALV format for MB5T Report
Dear Experts ,
I want to have a defalut selection of ALV format for MB5T report .
How can I do this .
Regards
AnisHi Chakrapani ,
Please suggest if there is any other way to tackle it without the intervention of ABAPer .
Regards
Anis -
Hi All,
I haven't worked on the DME engine before, but now I have a requirement for which I have to create a tree format for 1099B and 1099S which do not exist in SAP. I'm planning to make a Z copy of IDWTFILE_US_1099INT or IDWTFILE_US_1099MISC and add/remove fields as required relevant to the B and S versions of 1099.
Can you please advise me on the considerations and dependencies, as well as tips and tricks on this one?
Thanks in advance.
- JHi Shirish,
This is what we did for 1099 B file format.
1. Copy the IDWTFILE_US_1099 file format to the customer name space.
2. Add the relevant additional fields per IRS publication (you can get this from the IRS website)
3. Create seperate output group for 1099B and specify the new customer DMEE tree.
4. Also, in the program RFIDYYWT, set up variant to pick only the withholding tax type relevant to 1099B (you might have to setup/activate the relevant withholding tax types)
5. This way you can output only the 1099-B relevant FI line items.
Let me know how this worked out. -
Add Vendor Name to S_ALR_87012357 (adv.return for Tax report)
Hi All,
Could anyone help how can I add "Vendor Name" to the Output List of S_ALR_87012357 ("advance return for Tax on sales" report)
Thank you and Regards,
OrlyHi,
please go to Output section of report
now click on confiure in front of Input tax line as below
Now here you have business partner field which will give you vendor name and you have name field as well.
Many Thanks -
Substitution for Tax reporting date
Hi,
I have created a substitution at document header level to change Tax Reporting date field.
It works correctly when I enter a fixed value or another field value, but when I enter a user exit it does not work in VF11 transaction
Which could be the problem?
ThanksDear expert
Problems calculating tax reporting date in VF11 transaction
user exit VF11 for accounting
Regards
Ajeesh.s -
Hi Experts
I am unable to find SAP delivered file format for BANAMEX ( leading bank in Mexico ) in DMEE for Tree type PAYM.
Can anyone guide me on this?
Thanks821111 Mexico BANAMEX Version C - Legal Change
944953 Mexico BANAMEX Version C - Legal Change
101440 Payment medium formats
As described in the mentioned note 821111 you can create the DME for
BANAMEX using RFFOM100.
Run the program RFFOM100 and goto Output Control TAB, then
if you goto the field 'Alternative format you will see that the
following formats can be choosen:
BANAMEX Mexico - Banamex
BANAMEX_4R Mexico - Banamex
BSM Mexico - Banco Santander Mexicano
The SAP Note 395679 describes the formats that are available in the
Payment Medium Workbench.
Other formats are not offered at the moment in the standard system.
You can use the Payment Medium Workbench to create special DME's.
Please see the note 524520.
The second tool which is integrated in PMW and which can be used for
creating new files is DMEE-engine (transaction DMEE).
I hope it helps.
Regards,
Fernando Evangelista -
How to set the default print format for the report
Hi,
In ALV report , i want to defalut specific print format and printer for background processing .
Any clues!!!!!!!!!
Regards
SwatantraHi
Please check below code:
DATA: PRIPAR TYPE PRI_PARAMS,
ARCPAR TYPE ARC_PARAMS,
LAY TYPE PRI_PARAMS-PAART,
LINES TYPE PRI_PARAMS-LINCT,
ROWS TYPE PRI_PARAMS-LINSZ.
DATA: val(1).
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = 'LOCL' " <--- Printer Name
no_dialog = 'X'
immediately = ' '
IMPORTING
out_archive_parameters = arcpar
out_parameters = pripar
valid = val
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*** Specifying the page formats
pripar-linct = 65.
pripar-linsz = 190.
pripar-paart = 'X_65_132'.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
in_archive_parameters = arcpar
in_parameters = pripar
no_dialog = 'X'
* list_name = 'Testing Purpose Only' "l_list
IMPORTING
out_archive_parameters = arcpar
out_parameters = pripar
valid = val
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc EQ 0.
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS pripar
ARCHIVE PARAMETERS arcpar
NO DIALOG.
ELSE.
write:/ 'Unable to create spool'.
ENDIF.
So now a spool is created with the required print parameters...
The list that is created from here will be in the spool.
Once the list is completed, close it with NEW-PAGE PRINT OFF.
Hope this helps.
Regards
Eswar -
Chinese Character in PDF format for Oracle Reports 11g
Hello Everyone,
Currently we have a Report that need to be display chinese character in PDF format.
We followed the steps specified in the "Oralce Fusion Middleware Publishing Reports to the Web with Oracle Reports Services"
documentation but things doesn't work. We also installed Adobe Acrobat Reader 9 and Asian Font Pack 9 on the server side
and even on the client/user/development side and followed the steps in the documentation, but no effect at all. Or we even
tried "Arial Unicode MS", same thing no effect.
For sure, we may miss something during PDF aliasing or PDF subsetting setup.
Anyone out there who has the same experience and able to resolve the issue that currently using the Oralce Fusion Middleware Reports 11g?
Doesn't matter if it does not related to chinese character, as long as it relates to this issue like japanese or arabic characters in PDF.
If its ok, kindly provide the steps how you do it.
Your help is highly appreciated.
Regards and Thank you very much!I am now facing exactly the same problem as user449955 (Eric's). Dear Eric, how about your situation? If you have resolved this problem, may I ask for your solution?
In my case, using either font aliasing or font subsetting doesn't work at all (displaying "garbage" characters instead of Chinese characters). The setting in my uifont.ali is as follows:
If using font aliasing:
[PDF]
.....ZHT16HKSCS = "MSungStd-Light-Acro"
If using font subsetting (the REPORTS_PATH already includes "C:\Windows\Fonts"):
[PDF:Subset]
"Courier New" = "mingliu.ttc,2"
For both cases, the report server's NLS_LANG already set to "TRADITIONAL CHINESE_HONG KONG.ZHT16HKSCS" (I am in fact located at Hong Kong). For font aliasing, the client side already has Asian Adobe Reader with Asian font pack installed.
By the way, I noticed that the WebLogic EM is configuring/updating the uifont.ali file at "<instance home>\config\FRComponent\frcommon\tools\common" directory, but the Oracle Reports 11g's documentation sometimes advise to refer to another uifont.ali file located at "<instance home>\config\FRComponent\frcommon\guicommon\tk\admin" directory. Which one of the uifont.ali files is the one used by the Oracle Reporting Service?
My report server's platform is Windows 7 Enterprise (64-bit) and the Reports version is 11.1.1.3.
Anyone can help to advise?
Thank you very much.
Regards -
Hi Gurus,
I have a report which will return the Posting Date and Document date in the mm/dd/yyyy format. I need this to be displayed in dd/mm/yyyy format. I need this to be done in the BEx level since this report will be automatically generated and emailed to user.
I promise will assign point for your kind answers.
Thank youHi Saravanan,
You can change Date format in your system.
Start->Settings->Control panal->Regional & language options-> Regional options->
customize->Date
Here change Date format from mm/dd/yyyy to dd/mm/yyyy
Once u did it logoff from Bex and login again. -
Download formats for interactive reports
Hi,
how can I activate the other possible download formats (RTF and XLS) at my interactive reports? I only see the CSV anf PDF-format.
Any help appreciated
ThanksHello Norbert,
you have to buy BI Publisher to be able to export the other formats.
If you already have BI Publisher you can choose between the formats on print attributes page of report definition.
If your user shall be able to select the download format you have to create an item (I would use a select list) where the user can specify which format he wants. This item you can reference on the print attirbutes page, too.
Regards, Tine. -
Technical specification format for webi report
Hello expert,
I was asked to design a webi report, will you please tell me how to write a technical specification format? appreciate very
much. zhang-boling at hotmail.comIt depends on your requirement.
Basically Techanical specs contain below inforamtaion in it
1. Tabs Name
2. Objects Used
a) Object Name b) Objects DataType c) Database Table
3. Query Names
4. Conditions Apply
All the condition mention in the Query
a) Object b) Operands c) Value
5. Prompts Used
6. Sql Coming from all th Query.
You can create this either in Excel or Word Documents. -
Note 1599687 - New Model 111 for tax reporting
Hola Buenas tardes,
Estamos aplicando la SAP Note 1599687 pero hace falta en el PDF Manual_post_implem_steps_1599687.pdf los textos:
- Campo S_GEN111.
Podeis decir a Desarrollo,
Saludos,
JorogapeBuenas tardes,
Hemos actualizado la nota 1599687 con el paso manual que estaba faltando.
Muchas gracias por avisar,
Carlos. -
PMW to create ACH CCD+ TXP Addenda format for remitting withholding taxes
Hello, I am looking for documentation for creating the ACH CCD+ with the TXP Addenda format for tax payment remittance using Payment Medium Workbench (PMW). Is there a standard payment method and format that can be used?
Hi Rick,
You might need to tweak standard DMEE formats 'ACH_CTX_FG' or 'ACH_FG_BULK' to include TXP addenda information. You can do this through transaction DMEE. Use these DME formats in Payment method/Country settings (Transaction OBVCU). SAP provided payment methods 'D' or 'T' for US in standard system with above formats and format supplements 'CCD' and 'CTX'.
You can configure formats 'ACH_CTX_FG' or 'ACH_FG_BULK' in transaction OBPM3; user exits available.
Use transaction OBPM4 to set up the variants for formats.
You can execute program SAPFPAYM to create DME files after completing the payment run through F110.
Please award points if you find above information is useful.
Thanks,
Venkata Ganesh Perumalla
Maybe you are looking for
-
Hai, I have problem in advancedTable in oaf. I don't know how to get last clicked row events in advancedTable. I construct the advancedTable using VO without EO. I want to save last modified record into database. But I can't do. T
-
Water damage screen does not work
I dropped my phone in water yesterday and took it out.....it blinked for a few min and then turned black. I immediately placed it in rice and it stayed there for 16 hours. I can hear my phone, listen to songs but i cannot see the screen. Any thoughts
-
Hierarchy display not enabling drill down
Hi We have a custom hierarchy on the cost center object which has 5 levels. The 5th level is the cost center.In some nodes the values are repeating for the first 4 level. e.g. level 1 : ABC level 2 : ABC level 3 : ABC level 4 : ABC In such a case the
-
Mail opens three messages when I open it
This has been happening for a few weeks: upon launching Mail, it immediately opens three separate windows, one each for different aliases I have linked to my Mail account. I only really use one--my main alias for the Roadrunner email address I have--
-
Imac takes 5-6 minutes to boot up
Hello My 2011 Imac takes 5-6 minutes to boot up. Once it boots up the computer seems to run fine. I have tried several things to try and fix the issue but have had no luck. Any advice would be great. Thank you Richard