DMEE layout for two different format

Hi,
I want to create DMME for Argentina.
this contains two format.One is with tax and other is without tax for the same company code.
wheter it is possbile to define two layout in a single DMEE tree.
If so how to seggregate these two in a single layout.
Regards,
Bala

Say you are using two different queries as DP1 & DP2 for Display and Plan mode respectively. You also have one Analysis grid item in Web template which initially points to DP1.
On PLAN button call command SET_ITEM_PARAMETER to set the data provider of analysis item to DP2.
OR
You have only one dataprovider in your web template as DP1 initially pointing to Query 1 which you want to show in Display mode. Then on PLAN button call a command SET_DATA_PROVIDER_PARAMETERS to point the DP1 to 2nd query instead of 1st query. You can find this command under Commands for data Provider --> Basic data provider commands.
Edited by: Deepti Maru on Nov 27, 2009 9:52 PM

Similar Messages

I am trying to store music for two different iPods on the same computer, against two different Apple IDs. When I try and download content from the Cloud I get an error message?

I am trying to store music for two different iPods on the same Windows 8 computer, and when I try and download content from the Cloud I get an error message. Is it possible to have two different Apple IDs on the same computer?

Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

Same number range for two different series groups?

Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.

With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop

Same Apple ID for two different country accounts?

Is it possible to use just one Apple ID for two different iTunes accounts? I've recently located to Australia from the uk and want to run an iTunes Store account in each but with just one apple id and email address. Can it be done?

You have to be in a country to use its store (and an account can only have one billing address on it), so whilst you are in Australia you can only use the Australian store, you cannot use the UK store (including redownloading past purchases). You can either update your billing address on your existing account to have your Australian address on it, or create a new account with your Australian billing address on it
Changing country on an account : Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account - Apple Support.

HT201269 Can I set up two accounts for two different iPhones on the same iTunes account. Jimmy

Hello,
CanI set up two accounts for two different iPhones on the same iTunes account. Thanks JIMMY

http://support.apple.com/kb/ht1495
You can use the same apple id for two separate phoones to share apps/music, however you would need a separate apple id for both phone for imessage/facetime/icloud.

Can i load two different itunes on the same computer for two different ipods?

Can I load two different itunes on my computer for two different ipods? Or how can I get it so that when I click on itunes, only my songs come up and not my wifes? And the same for her.

Yes. The simplest way is to have separate Windows accounts for each user. When either user runs iTunes, he/she will have a separate library with distinct content, playlists, etc., and can sync individual iDevices as needed.

Using Same Bank Account for two different company code

Can we use the same bank account number and ABA key for two different company codes? Both the company codes are in USA and with the same currency.
Scenario is to separate one division of the company code to a separate company code. Client wanted to know if we can use the same bank account so that they dont have to open another bank account

The system will allow the same ABA and bank account on two different company codes. However, if you use electronic bank statement (EBS) functionality (or plan to use it in the future), you will not be able to import bank statements for the account if it exists on two company codes. The EBS program uses the house bank/account ID tables to assign a company code to the bank statement. If the account exists for more than one company code, the program cannot assign a company code and it will give an error.
Regards,
Shannon

One instance for two different application

Hello,
I have to solve following problem..
need have one instance of object for two different application..fist is standard SE application and second is EE (web)..
SE application is a server..listen on and accepting connection from mobile phone..and EE application need to show list of connected devices and should say to SE application that new device was connected..
I would like to do this without database..only server and web app..
I have thought about RMI..but hope there is more simple solution..
Thanks a lot for your ideas.
Dmitrij

I would like to do this without database..only server and web app..You have your reasons for wanting this to be the case. If you are sure you don't want a DB, then pass the state of the object between the two ends using XML as the transport form. As someone said, you can use JMS or you can write an HTTP POST or probably other transport mechanisms other people will suggest to actually get it over the wire from one side to the other.
As to your question of how to sync state, just make the object you're sharing final after it's been created (on the side that creates it) and make the reference that receives it and holds it final also, after you've reconstructed it from the XML you received.

One PO for two different vendors

Hi Experts ,
My Questions are ......
Can we maintain two different vendors for two different materials and create one PO ? ;
How does it work ?
How is it sent to different Vendors ?.
Will the vendor receive one general PO containing all line item materials from different vendors...or Each vendor will receive his own line item PO (PO Split)...
Regards
Albert

Hi Albert,
Your qns-
Can we maintain two different vendors for two different materials and create one PO ? ;
Yes you can maintain 2 different vendors for 2 different materials. But you cannot create a single PO (i.e. PO with same number) for 2 different vendors. I do not understand why you want to create one PO for 2 vendors supplying different materials. Can you please explain the logic for it?
Vivek

HT4314 I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not ha

I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?

By "game center account", do you mean Apple ID?
If so, you can change it.
1. Tap settings and navigate to iTunes and App Stores
2. Tap "Apple ID" and then tap "Sign Out"
3. Log in with a different ID.

Is there a way to have two different iTunes for two different iPhones on one Windows User account?

Using Windows 7, iphone 4.
I've read as many threads on these forums and as many kb's as I could find, but I sttill can't figure it out. I have 2 iPhones. Let's call them, "wife" and "hubby". I want to have two separate iTunes, one for each of the phones. Hubby is the Windoows User. I don't want to set up a different Windows User for wife.
Hubby was the original iPhone. When I plug it in, iTunes recognized it has Hubby's iPhone. Then I unplug Hubby and close iTunes. I plug in Wife but iTunes stll comes up with Hubby under Devices and syncs Hubby's iTunes to Wife's iphone.
I've tried using the shift key when I open iTunes to set up two separate .itl files to no avail.
Is there a way to have two different iTunes for two different iPhones on one Windows User account?
Thanks!

What happens if you rename the iPhone "Wife" when it shows up as "Hubby", then choose a different set of apps/playlists to sync with? iTunes is supposed to be able to manage multiple devices, each with their own selection of content. Perhaps you "restored" "Wife" with a backup from "Hubby" when you first set things up which is now causing confusion.
To create a new library press and hold down the shift key as you click the icon to start iTunes and keep holding shift until asked to choose or create a library. You need to use the same technique to switch back.
tt2

Using a variable for two different characteristic

Hello
I've to following situation:
1) While execuring a query in BEx Analyzer, the user should manually enter a specific key date KEY_DATE
2) Then, two InfoObjects should be restricted by using that KEY_DATE as follows
     a) InfoObject BEG_DATE <= KEY_DATE
     b) InfoObject END_DATE > KEY_DATE
So, in Query Designer I've created a variable KEY_DATE and added it to each of the above InfoObjects. Now, while executing the query I get an error: "Variable KEY_DATE is used for two different characteristics".
Is there another possibility to realize my requirements?

Hi Dear,
         create variable for that date and restrict the char. info object by that date.
-->create a variable of date char.
-->in General tab, select processing by Replacement path
-->in replacement path , offset 0 and lenght 0
-->ok
when u restrict, select value ranges and select greater than for one and less than equal for another
try and let me know if any probm...
Regards
Obaid

Same query takes different time for two different users with same privileges

Hi,
Just wanted to know if it is possible for an INSERT query to take different amount of time for two different users for the same volume of data. If so, what could be the reason? I would like to add that we are not executing the query simultaneously. But it is always faster for user1(within 10-20 seconds) and slower for user2(takes around 8-10 minutes).

Show execution plan for each user. I think there is other reasons which you didn't not tell

Is it possible to use the same Switch for two different clusters.

I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.

user9198027 wrote:
I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.
Yes. Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

JInitiator - 2 versions for two different systems

I had a requirement of having two differnt versions of Jinitiator loaded on a single client system. This is requiremnt for two different applications say application 'a' and application 'b';
Will browser recognise which one to choose depending upon application ?

Yes, the confirguration information on the application server defines which version of the plug ins to us and so the correct one will be loaded.
Regards
Grant Ronald
Oracle Product Management

DMEE layout for two different format

Similar Messages

Maybe you are looking for