DMEE PMW Field FPAYHX CHECK

Hello,
I am attempting to create a payment media workbench file for ACH payments. I have created a check lot number seriers and assigned it to my ACH payment method, thus allowing us to track ACH payments in the check register. I want to use the field FPAHX CHECK in my DMEE mapping tree but it will not output in my file?
Are there any settings with my payment method or otherwise that would prevent me from using this field in my mapping engine?

Hi
I have the same proble. Please let me know how did you resolve it.
Thanks

Similar Messages

Check number not filled into FPAYHX-CHECK

Hi
I am trying to use a DMEE based format for check payments. When executing the payment run, however, the field FPAYHX-CHECK is not populated.
What have Idone:
1) I have defined an payment method where we have set the indicator that a check will be created using this payment method. This payment method uses the a payment medium workbench format. In the DMEE I have mapped the field FPAYHX-CHECK to the field check number.
2) I entered a vendor invoice with t-code FB60 with the payment method defined in step 1
3) I executed the proposal, the payment and the payment medium creation with F110
4) The payment file does say it is a check, the field check number, however, is empty
I have found out that the field FPAYHX-XSCHK is populated with 'X', the field FPAYHX-CHECK is empty.
Am I forgetting a step? What went wrong? I'd be glad for some help.
Regards
Kris

Hi ,
did you defined Check Lot for payment Method C in FCHI for your House bank and acount ID .
Many Thanks

GL Center is a required field! Check file definition format in file header

Hi
I am new in Hyperion FDM. I am trying to load a txt file using multiload feature of FDM. I have created a VBScript to load data. When i run the script it finishes without error but doesnt load any data. I get the following errors in the log file
** Begin FDM Runtime Error Log Entry [2012-01-29 16:20:07] **
ERROR:
Code............................................. 2621
Description...................................... GL Center is a required field! Check file definition format in file header (Lines 1-6)!
File=10_SAMPLE_Actuals_JAN - 2011_RM.txt
Procedure........................................ clsMPLoader.fStructGetText
Component........................................ upsWMPLoaderDM
Version.......................................... 1111
Thread........................................... 3212
IDENTIFICATION:
User............................................. admin
Computer Name.................................... RAJNEESH
App Name......................................... testfdm1
Client App....................................... WorkBench
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... orcl
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SAMPLE
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... ACTUALS
Category ID...................................... 12
Period........................................... Jan - 2012
Period ID........................................ 1/31/2012
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
Here is the contents and format of the text file that I am trying to load
SAMPLE
ACTUALS
Jan - 2012
1
R,M
a,v,e,v
a1,version1,e1,100
a2,version1,e1,100
a3,version1,e1,100
Obviously there is something wrong in the txt file above. Can anybody let me know whats wrong I am doing. I also see following error in the tbatchcontents database table after the VBScript finishes running
10_SAMPLE_ACTUALS_JAN - 2011_RM.TXT_CHECK-IN-FAILED (CODE=2621)
Need your help. Thanks.
Edited by: rajneesh sharma on Jan 29, 2012 2:02 PM

Please see this post => Essbase Multiload
Thank you,
Todd Rebner

How to have a field automatically fill in another field when checked

Does anyone know if there is a way to have a field automatically fill in another field with a specific dollar amount when a field is checked.
I am doing a registration sheet for a charity event where we have to pay for each person that attends. I would like it set up so that when someone checks in the person at the registration table would just click the check box (E2) and then have it fill in the field next to it a dollar amount of $15.00 (F2) which would be owed to the place hosting the event.
Attached is a picture of the spreadsheet: example: persons checks off E2 and the amount $15.00 would automatically fill in field F2. I would then do this for each line and have the F column total the amount owed to the place.
I am VERY new to numbers and writing formulas so if you can be specfic with how to do the code would be greatly appreciated. THANK YOU!

please remember to post the actual solution (equation in this case) so others that are searching for similar items see the solution, not just
Got it, replaced 0 with '''.
Thanks
Jason

Field only check box in extraction

Hi
what is use of field only check box in extraction
for selection its reflect data selection tab at infopackage
hide menas its wont reflect
inversion menas multiple with -1
field only is anothe one
what is use of field only
regards
suneel.

HI Suneel,
Hide and filed only are depend on each other... For example u have done the enhancement to the data source with the Revenue field. And revenue is nothing but Price * Quantity. And price and quantity u have these fileds in data souce already but u dont want them in BW. U want them in the calculation.
So we select Hide to not to come into BW and Field only to use them in the calculations.
Khaja

Field only check box

Hi Friends,
what is the use of field only check box iam littelebit confused, could you explain me clearly.
Thanks and Regards
Venkat.Marneni

Hi,
If you do enhancement for a datasource it will be used:
The indicator Field known only in Exit is set for the fields in an append structure, meaning that by default, these fields are not passed to the extractor in the field list and the selection table.
So by default it won't get data, so remove the tick mark and then do the mapping in BW.
Thanks
Reddy

Saved text fields and check-boxes empty when 3D window activates

I've created Text Fields and Check-boxes in a pdf template, using LiveCycle Designer.
I create the 3D work in Reviewer, and use the pdf template during Export to 3D pdf.
Using 'Extend Features in Adobe Reader' the user can fill in the text fields, and click the check-boxes then save them with the pdf - just using Reader.
So far this is great!
The problem comes when the pdf is opened again and the 3D window (A3DR_3DFrame) activated.
All the completed fields empty!
This is not great at all!
I've did some tests and found that the filelds only clear if I include the Configs selection list box with the special name 'A3DR_Configs' in the template pdf. (A3DR_Configs lists the Configs stored in the 3D Reviewer file and the user can select the config from that list).
This is unfortunate, as the A3DR_Configs window is useful since it indicates to the user which 3D config is currently being viewed (ie the name of the current config stays highlighted).
Is this a bug that can be fixed or is there a workaround?
thanks,
Ian

Would you mind to post your commenton the the approriated Adobe forum page ?
This one is dedicated to Acrobat 3D
The correct forum page for Designer is:
http://forums.adobe.com/community/livecycle/livecycle_es/livecycle_designer_es
Thanks in advance
William

How to ennable/disable a field or check the status of a field

I'd like to ennable/ disable a field, and check if a field is ennabled or disabled. Does anyone know the methods for this?

I had a problem where dropdowns that were populated from the Standards Table wouldn't allow me to set them as Read-Only. Doing this allowed me to automate some other dropdowns and reuse the form over several services, so there was actually a reason for this.
Anyway, I used this to force the dropdown to Read-Only after it was populated, since Javascript runs after the Conditional Rules.
JS_Z_SetReadOnly (theobject){
var myselect=document.getElementById(theobject);
myselect.disabled = 1;
What I passed to it was the FormName.DictionaryFieldName in single quotes - 'CMN_Chargeback.OfficeNumber'.

Changing the dropdown values for one of the fields in CHECK STATUS query

Hi,
We are on SRM 7.1.
In the CHECK STATUS transaction,in the selection screen(QUERY),there is a field called "ROLE" which has teh dropdown values of "APPROVE BY ME","REJECTED BY ME" and "GOODS/SERVICES DELIVERED TO ME".Is there any way some of these drowpdown values can be removed?
Please advise.

hi nmsrm1234
i have a document for this issue.
but i don´t find this document in internet. it is called : CUSTOMER-SPECIFIC UI ADJUSTMENTS IN SRM 7.0 WEBDYNRPO ENVIROMENT / META DATA HANDLING CONCEPT.
if you can find it, you will get an idea to resolve this issue, if you will no have luck, please get me your mail, and i will send you the document.
regards.

Interactive fields and check boxes don't stay in tab order

Hi everyone. I'm creating a census form for my parish which contains questions and check boxes. I've laid out the first section of this form (called Household Member 1), then gone back and added all the text fields / check boxes in the order in which I want the user to be able to tab through the form. When I open the Tab Order dialogue box to make sure the user will be able to tab through the form correctly, all the fields / check boxes are in the correct order. Now I need the exact same sections repeated... Household Member 2, Household Member 3, etc. In total, there will be 7 sections on the form that request the exact same information. So after I get the first section the way I want it, I copy and paste, or drag and duplicate the section with all it's fields onto the next page. However, when I check the Tab Order on this subsequent sections, all of my check boxes have moved to the end of the list, requiring me to have to manually move each check box back into its correct position in the section. This happens every time I duplicate the section... I have to manually put the tabs in their correct order. I tried duplicating the entire page rather than just duplicating the section, and the same thing happens. These fixes are tedious to say the least. Any thoughts about how to fix this would be appreciated.
I'm using CS6 on a Mac with OS 10.8.3

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Select Button beside custom metadata field on Check In Form

Hi
In Oracle Content Server 10gR3, is there a way to add a "Select" button to User Alias Applet for a new Meta data field on New Check In Form? I tried creating a component but I don't see a select button being shown up. The button does shows up if it's a standard metadata fields but not for the custom one. Here is the component code. Any idea what I am doing wrong and how to fix it.
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
CustomMetaData htmlIncludeOrString
</title>
</head>
<body>
<@dynamichtml std_meta_fields@>
<textarea name="xClbraAliasList" rows=3 cols=40 wrap=virtual></textarea>
<input type="button" value="Select..."
onClick="popupSelectAlias(document.Checkin);">
<script language="JavaScript">
     var aliasForm;
     function popupSelectAlias(frm)
          var selUser = document.selectAliasApplet;
          aliasForm = frm;
          selUser.createFrame();
     function setAliasString(val)
          if (val.length == 0)
               return;
          var str = aliasForm.xClbraAliasList.value;
          str.trim;
          if (str.length > 0)
               str += ",";
          str += val;
          aliasForm.xClbraAliasList.value=str;
     </script>
     <applet name="selectUserApplet"
    code=com.intranetsol.utilities.SelectUserApplet.class
      codebase="/idc/common/"
     archive=suapplet.zip
    id=selectUser
    width=0
    height=0
     MAYSCRIPT>
          <param name=CGI-URL value="/idc/idcplg">
          <param name=JsDisplaySeparator value=",">
          <param name=IsPaged value="1">
          <param name=IsUserList value="1">
          <param name=JsFunction value="setUserString">
</applet>
<applet name="selectAliasApplet"
    code=com.intranetsol.utilities.SelectUserApplet.class
      codebase="/idc/common/"
     archive=suapplet.zip
    id=selectAlias
    width=0
    height=0
     MAYSCRIPT>
          <param name=CGI-URL value="/idc/idcplg">
          <param name=JsDisplaySeparator value=",">
          <param name=IsPaged value="1">
          <param name=IsAliasList value="1">
          <param name=JsFunction value="setAliasString">
</applet>
<@end@>
</body></html>
Then I tried using the same code as above but instead used the built-in dDocType to show a "Select" button. This works but the button obviously shows besides dDocType but when I try for custom metadata as shown above it doesn't. Here is the sample code for dDocType:<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
CustomMetaData3 htmlIncludeOrString
</title>
</head>
<body>
<@dynamichtml std_doc_page_definitions@>
<$include super.std_doc_page_definitions$>
<$include custom_modify_comments_definitions$>
<@end@>
<@dynamichtml custom_modify_comments_definitions@>
<$if isCheckin$>
<$xComments:isHidden = 1$>
<$xComments = "some preset and hidden comments"$>
<$elseif isUpdate$>
<$xComments:isInfoOnly = 1$>
<$endif$>
<@end@>
<@dynamichtml compute_std_field_includes@>
<$include super.compute_std_field_includes$>
<$if fieldName like "dDocType"$>
<$if isCheckin or isUpdate$>
<$fieldEntryInclude = "custom_doc_type_popup_field_entry"$>
<$endif$>
<$endif$>
<@end@>
<@dynamichtml custom_doc_type_popup_field_entry@>
<input type="text" name="dDocType" value="<$fieldValue$>">
<input type="button" value="Select..."
onClick="popupSelectAlias(document.Checkin);">
<script language="JavaScript">
     var aliasForm;
     function popupSelectAlias(frm)
          var selUser = document.selectAliasApplet;
          aliasForm = frm;
          selUser.createFrame();
     function setAliasString(val)
          if (val.length == 0)
               return;
          var str = aliasForm.xClbraAliasList.value;
          str.trim;
          if (str.length > 0)
               str += ",";
          str += val;
          aliasForm.xClbraAliasList.value=str;
     </script>
<applet name="selectAliasApplet"
code=com.intranetsol.utilities.SelectUserApplet.class
     codebase="/idc/common/"
     archive=suapplet.zip
id=selectAlias
width=0
height=0
     MAYSCRIPT>
          <param name=CGI-URL value="/idc/idcplg">
          <param name=JsDisplaySeparator value=",">
          <param name=IsPaged value="1">
          <param name=IsAliasList value="1">
          <param name=JsFunction value="setAliasString">
</applet>
<@end@>
</body>
</html>
Can someone please let me know what is in my above code that I am missing that is preventing the button not being shown in-front of the custom metadata field.
Any help would be greatly appreciated.
Thanks
Edited by: guest0012 on Aug 29, 2009 4:24 PM

Interesting!
You'll need a component. You already mentioned you had a custom metadata field. You will also need to add a counter to the counters table for your component. During a check in you will need to fetch the next value from the counters table, increment the counter and store the new number back in the table. The year portion of the id is easy, get the current year and grab the last two characters. Then, put this all togther to get the data for your metadata field.
The big question now is where in the check in process will you do all this? You will need something called filters probably. Maybe addFiles, maybe validateStandard, there are several that this could work with.
Check out the how-to-components:
http://www.oracle.com/technology/products/content-management/ucm/samples/index.html
-Jason
http://www.corecontentonly.com

How to include a new field for checking duplicate customer master

Dear All
we have activated the standard procedure to check duplicate customer master data. This is a standard procedure as below :-
Procedure:
Run SM30, key in Table V_T100C, select Display or Maintain, set App area F2. Here you can change current settings.
Check the transaction OBMSG for application area F2, where these messages are maintained and at this place you can convert the message from warning to error.e user needs one more field to be added to this check.
It is working perfectly fine but it only compares two fields for duplicates in the customer master i.e the customer city and name.
Is there a way to include a new field in this procedure ? For example we also want the system to check duplicate entries for field name " street 5" and give a warning /error message incase if there is another entry already existing on the master data.
regards,

Hi
Use the enhancement SAPMF02D to check these values.
Regards
Eduardo

DME / PMW Format

Hi,
I created a custom payment format in DMEE and assigned it to the payment type in the configuration and looks ok ..
the issue is when the payment proposal is scheduled i see an entry in the DME adminstration for the proposal with the right total amount displayed but the output (file) has only one entry ( the first payment ) and the rest are not recorded..
am i missing something in DMEE / tree definition which is causing to record only the first record and ignore others.
Appreciate your help .
Thanks.

you have to setup correct sort/key fields.
If you want to see all items sort/key fields have to be equal primary key
let say we have table BKPF then key has to be: BUKRS BELNR and GJAHR
Michal

Add custom fields in check status

Hi Gurus,
Please help me out in this. My requirement is I need to add two custiom fields in the check status (bbpsc04) and based on the values entered in the custom fields I need to search for the shopping carts.
Please let me know how to add two fields in the check status and fetch the data based on the values entered in the custom fields.
Thanks in advance,
Andy.

Hi Andy,
first you need to make the customer fields for the shopping cart (header or item level) I assume that's already done.
Now to add the customer fields to the <u>extended</u> search you need to do the following:
1. Define the customer field in include:
a. SC HEADER INCL_EEW_PD_SEARCH_HDR_CSF_SC
OR
b. SC ITEM INCL_EEW_PD_SEARCH_ITM_CSF_SC
you have to set fields XINPUT and XDISPLAY to 'X' in table ET_FIELDS for the fields you want to use in BADI BBP_CUF_BADI_2 in method MODIFY_SCREEN. The fields defined this way are displayed if you choose the 'Extended search' link.
Refer to note 672960 - "User-defined fields 2" For more detailed instructions.

What is the field for checking authorization block in payment card

Hi experts,
I am using BAPI_SALESDOCU_CREATEFROMDATA to create debit memo requests.My requirement is to check the checkbox 'authorization block in VA02 ->header->payment cards.But i could not find that field in BAPI as well as in this table.I am picking credit card data from FPLTC table,
There is one field called checkbox in BAPI.Is it the same field im in search,the what is the corresponding field in FPLTC table.
Please advice,
Thanks and regards,
Meena

Meena,
As I recall the Authorization Block field (FPLA-AUST5) is set based on a response code field in field CC_REACT_T. If you set this value to 'C' (which stands for "Unsuccessful: set authorization lock") then SAP will set FPLA-AUST5 to 'X' in FORM ZAHLUNGSKARTEN_AUTHORISIEREN in program MV45AF0Z_ZAHLUNGSKARTEN_AUTHOR in the following section of code:
Stop-Flag setzten
      IF DA_XFPLT_AUTH_NEW-REACT = REACT_STOP.
        XFPLA-AUST5 = 'X'.
      ENDIF.
    ENDLOOP.
Eric Bushman
[Paymetric|http://www.paymetric.com]

DMEE PMW Field FPAYHX CHECK

Similar Messages

Maybe you are looking for