DMG checksum errors
Whenever I download large (more than a few MB) dmg files at work (PC, Windows XP, Firefox) and transfer them to my Mac using a USB flash memory drive, opening the dmg fails with a checksum error. If I re-download the same file with the Mac, they work.
This has already been a problem with my previous iBook G3, and now with my new MacBook. Any ideas what the problem might be? Are there any special Firefox settings or USB drive formatting required?
Thanks,
Victor
MacBook white 2GHz / 1GB / 80GB Mac OS X (10.4.7)
First I made sure the boot disk was OK, as well as running a memory check. Then I booted the system from a backup drive that contained an identical OS. The problem didn't show up running under the backup drive. I had previously determined that the problem was very "low level" (possibly in the kernel) because it was present even when dmg files were downloaded using "curl". Something was wrong with network binary downloads.
This all pointed to a kernel issue, so I simply copied the kernel and symbol table from the backup OS into the boot disk root. After reboot, the problem disappeared.
I can only assume that the original kernel got corrupted because of a kernel crash caused in my case by bad blocks on an external firewire drive.
--dick peskin
Dual G5
Similar Messages
-
Downloaded dmg checksum errors
I am getting dmg checksum errors on disk images (dmg files) downloaded over the internet. This occurs on one machine; other machines using the same local ethernet network and common interface (braodband connection) do not have the problem. All hardware errors have been eliminated; the problem is isolated to a specific OS copy. Permissions have been repaired and kernel caches cleared. Can anyone tell me where to look in the system for a possible cause? Is this a kernel problem? If so I can simply replace the kernel.
--dick peskin
Dual G5 Mac OS X (10.4.8)First I made sure the boot disk was OK, as well as running a memory check. Then I booted the system from a backup drive that contained an identical OS. The problem didn't show up running under the backup drive. I had previously determined that the problem was very "low level" (possibly in the kernel) because it was present even when dmg files were downloaded using "curl". Something was wrong with network binary downloads.
This all pointed to a kernel issue, so I simply copied the kernel and symbol table from the backup OS into the boot disk root. After reboot, the problem disappeared.
I can only assume that the original kernel got corrupted because of a kernel crash caused in my case by bad blocks on an external firewire drive.
--dick peskin
Dual G5 -
Photoshop 6 trial .dmg checksum error
I've tried 3 times to download the trial version of Photoshop 6 and when it tries to install, a message comes up saying there's a checksum error and it won't install. OSX 10.7.3
Any ideas out there? Thanks.You can override the verifying checksum feature by completing the following:
Go to Applications/Utilites/Disk Utility and launch it
Go to the Disk Utility menu and select Preferences
Deselect the Verify Checksum option
You should now be able to mount the DMG file. I would recommend turning these settings back on after you have installed. Also if you continue to receive errors like this there is likely an issue with your Internet connection. -
All my CS5 products open fine, but PS. It starts to boot then breaks off, "An unexpected and unrecoverable problem has occurred. Photoshop will now exit." with a Quit button. It has worked fine in the past. (Does it perhaps not work in OS X Yosemite?)
Thought I might just reinstall from my archived dmg file, but that gives me a checksum error, so that seems no longer an option.
Not sure where to turn next.
thanks for any pointersNo Ted it should not require a new download. Perhaps the file got corrupted in some way? As an alternate source we do have the retail installation files available at https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html.
I would recommend still maintaining a local back up. -
I have just purchased and downloaded Elements 10 for Mac but it won't install. The file is PhotoshopElements_10_WWEFDJ.dmg created 13 September 2011. When I try to open it I get a chcksum error.
One post to this forum said to turn off checksum verification in Disk utilities (seems kind of dumb) so I tried that. the file opened and installation failed. I tried it a second time after a system restart but it failed both times with the following text
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 17 error(s), 1 warning(s)
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirO3AIPQCR/Assets2/Fonts/KozMinPr6N-Bold.otf" to "/Library/Fonts/KozMinPr6N-Bold.otf" Error 0(Seq 1538)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1538)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
Second attempt
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 19 error(s), 3 warning(s)
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirsFmYmern/Assets2/Fonts/KozMinPr6N-Bold.otf" to "/Library/Fonts/KozMinPr6N-Bold.otf" Error 0(Seq 1538)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1538)
ERROR: DF024: Unable to restore file at "/Library/Fonts/KozMinPr6N-Bold.otf" from backup at "/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/Cleanup At Startup/.tempiKe3LG" Error 0(Seq 1538)
ERROR: DW063: Error rolling back command ARKDeleteFileCommand(Seq 1538)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
I tried renaming the downloaded file and downloaded again. Still a checksum error. It looks like this file is corrupt.You've got a corrupted download.
Get a new download: download the trial version and install that. Use your serial number to register and activate it.
Ken -
Problem with DMGs and error: "No Mountable File Systems"
Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaiaWhere you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it
-
CMOS Checksum Error on MSI 785GM-E51
Hi, I have 2 years old MSI 785GM-E51. Approximately 2 - 3 months ago, my PC just go hang without any reasons, even the mouse / keyboard won't respond to anything.
After I reset, sometimes it's fine, but sometimes it's hang again, the interval is random. Sometimes it even hang when in the POST or when i enter BIOS setting.
After several restart, it's sometimes gives me CMOS Checksum Error, so I decided to reset the CMOS using jumper method. After that my PC just works normal.
Until a week ago, my pc start to hang randomly again, the symptom is similar but this time sometimes it's not hang, but the PC just restart immediately with black / white / blue random pattern
displayed momentarily on the screen. And it always display CMOS Checksum Error. I already tried reinstalling Windows, and updating BIOS via flash disk from Live Update 5, no use.
I already tried to plug out my VGA and using the onboard one, still crash / hang randomly. I also test Memtest overnight with passing 11 pass without error.
Is it my motherboard already dead? or it's my PSU? CPU?
Here is my complete specs:
AMD Phenom II X4 955BE
MSI 785GM-E51
DDR3 Dual Channel 4GB RAM (corsair, forgot the model)
Radeon 5770
WDC 1TB
WDC 1.5TB
Amacrox Free Style 650W
Thanks in advance.Quote
Yesterday i desperate enough and change some BIOS settings, and
surprisingly, the CPU is much cooler!
Try entering bios, hitting f6 for optimized defaults then save and exit. See if problem persists.
Quote
As far as I remember, no, the crash / hang time i remembered is when POST / boot / startup / browsing / install app / playing games / copy file.
And one more thing, when it hangs, it really hangs, not just the windows, sometimes it even not respond to reset button, so i have to power it off. But sometimes it respond
to reset button, but with quite a long delay, it could half a minute i think.
Have you tried re-seating the cpu,memory and all of the power connectors etc?
What are the amp ratings on the 12v rail of the PSU? I found this on thier website but dont have time to dig furthur: Quote
4-Channel 12V Rails Design
Although the VGA you list only needs 24a on a 12v rail.
Quote
what's cpuid / ram timings / spd? where i can look at it?
http://www.cpuid.com/
When the program opens, take a screen shot of the tab that describe how your ram is running, It will show the current timings,speed, single or dual channel. Also take a ss of the spd tab, which will show the jdec standards that apply to that ram and the xmp profile. Then post the SS's to imageshack or the link and link them. -
According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
Integrity can be enabled when the system is not running on Storage Spaces. When
integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
fails the read operation by default. If you don’t want the read operation to fail, you
can configure ReFS to continue with the read operation. A related event will be logged
regardless.
So then how do I configure it to do that???
(And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
with integrity streams enabled, via format E: /fs:ReFS /i:enabled
For those who want more details, here's the situation:
I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
And an event ID 133 from ReFSv1 gets logged in the System log:
Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
This is indeed the correct default behaviour.
What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
been able to find anything.Hi Tommy,
>>How can I configure ReFS to NOT fail read operations when a checksum error is detected
We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
-Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.
Regarding this point, the following article can be referred to as reference.
Set-FileIntegrity
https://technet.microsoft.com/en-us/library/jj218351.aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Hello consultant:
We are trying configurated SSO usind SPNEGO module
We have a portal 7.0 ehp1 and Active Directory Microsoft versión 2003 native
we have followed the steps described in note Sap 1457499"Note 1457499 - SPNego add-on"
When we have logged with user Active Directory and we try access to portal we obtain following error:
Authorization check user error
We have Deploy the Web diagtool from SAP Note 1045019 on the J2EE server, run it and perform the
following steps:
1. Select "Component" = "security" and "Activity" = "all"
2. Click the "Go" button, followed by the "Add All" button
3. Select "Component" = "All" and in the "Search pattern" field write "com.sap.security.spnego"
4. Click the "Go" button, followed by the "Add All" button
5. Start the tool
Then we have reproduce the problem and stop the tool. The generated zip file will contain following error:
15:45:20:078 Error J2EE_GST_PRD SAPEngine_Application_Thread[impl:3]_15 ~p.security.spnego.krb5.crypto.DesCrypto Checksum error! checksum: 0xc46bfed8d0dbc54221ee75405c8cd5ac; calculated checksum: 0x6ead7e801608b729a6957597327f2ba5
15:45:20:078 Error J2EE_GST_PRD SAPEngine_Application_Thread[impl:3]_15 ~m.sap.security.spnego.SPNEGOLoginModule Could not validate SPNEGO token.
java.lang.Exception: Checksum error.
at com.sap.security.spnego.krb5.crypto.DesCrypto.decrypt(DesCrypto.java:43)
at com.sap.security.spnego.krb5.KrbEncryptedData.decrypt(KrbEncryptedData.java:81)
at com.sap.security.spnego.krb5.KrbApReq.decrypt(KrbApReq.java:67)
at com.sap.security.spnego.SPNEGOLoginModule.parseAndValidateSPNEGOToken(SPNEGOLoginModule.java:234)
at com.sap.security.spnego.SPNEGOLoginModule.processAuthorizationHeader(SPNEGOLoginModule.java:385)
at com.sap.security.spnego.SPNEGOLoginModule.login(SPNEGOLoginModule.java:102)
at com.sap.engine.services.security.login.LoginModuleLoggingWrapperImpl.login(LoginModuleLoggingWrapperImpl.java:185)
at com.sap.engine.services.security.login.ModulesProcessAction.run(ModulesProcessAction.java:70)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sap.engine.services.security.login.FastLoginContext.login(FastLoginContext.java:181)
at com.sap.engine.system.SystemLoginModule.login(SystemLoginModule.java:90)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:699)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:151)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:634)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at javax.security.auth.login.LoginContext.invokeModule(LoginContext.java:631)
at javax.security.auth.login.LoginContext.login(LoginContext.java:557)
at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:912)
at com.sapportals.portal.prt.service.authenticationservice.AuthenticationService.login(AuthenticationService.java:367)
at com.sapportals.portal.prt.connection.UMHandler.handleUM(UMHandler.java:126)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:181)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Could you help us?
Many thanks for your collaboration<< Do not post the same question across a number of forums >>
-
Apex 2.2.1- error in editing a report withIE 6: ORA-20001- Checksum error
Hi all,
I'am getting an Error when I try to edit a report with Internet Explorer 6: ORA-20001-...- Checksum error.
With Firefox it works fine.
Customer is using IE as standard browser and Firefox is not available here.
Any Ideas?
KazimI had to apply Patch 4554072, provided with APEX.
This patch is available in the directory patch\bug4554072.
Kazim -
Copy files between pcs - checksum error
Scenario:
- Two PCs (A and B) in a small LAN.
- Computer A runs a NFS and a FTP server. I can transfer file from A to B mounting the nfs exported directories or downloading them via FTP.
- The files can reside in ext3 or xfs partitions, on different drives, in A and they are being copied to B in ext3 or xfs partitions, again on different drives.
- Drives and filesystems are healthy (knock on wood).
I download a given file along with its checksum file (md5 or sfv format), from internet on A: the checksum check using cfv (tried even md5sum) says it's allright.
Then I copy the file on B (via FTP or NFS - it doesn't matter), check it again and I have an error ("bad crc"). Sometimes for the file I download, there's a torrent: if I use the torrent file and check the integrity of the downloaded file (with ktorrent or gtorrentviewer), I find that there's a missing piece.
The above happens random, not always and not with all files.
A really strange thing is that, if I mount A's exported directory in B and if I run the checksum check from B, I also get an error (as said above, if I check the file directly on A, it's good).
I can't remember when this started - in your opinion, where should I look for solving this?I dont really understand the torrent part of the story.
Sorry - I wasn't that much clear and my english doesn't help
A torrent file can be used for an integrity check of the file: not only it reports if the checksum is right or wrong, but - in this latter case - it can tell you that there are missing pieces in the file and how many.
Hmm and it sounds like pc B isnt that healthy
I checked for filesystem sanity in both PCs, and I also run the Seagate diagnostic tool on both of them. The chance that 4 hard disk are failing at the same time in the same PC is negligible. Anyway, I'm open to suggestions here - maybe it's an hardware issue, but I don't think it's related to the hard disks.
what if you try it with an usb stick ??
I'll try copying files to an external drive and to another PC - thanks for the idea
try to check the size of the file you copy if there are both equal.
They aren't - otherwise I won't get that checksum error. The difference is usually small, though - only a few kbytes: it seems to me that the copy process doesn't end properly. -
Solaris 10 express developer ed. dvd checksum error
Hi,
I downloaded the solaris 10 express developer ed. dvd. I used Sun Download manager for the download. the file e had checksum error. Hence the DVD contains checksum error. Is there any way we could correct the download without the need re-download the entire file. Other files ending a,b,c,e dont have this problem. Am i the only one getting this problem or is it a known issue?
with regards,
ashwinSorry there is no real way to solve this other than downloading the last segment of the file.
-
Checksum error in Manual Tabular Form
Hi everyone,
I have created 2 (manual tabular forms) on a same page but i am getting checksum error for one of the tabular form.
Here is my code:
1 st Tabular Form:
select
x.del,
x.ECGEXST_ID,
x.LEAD_CD,
x.ST_ID,
x.ENTERED_DTS,
X.ENTERED_BY_NM,
X.UPDATED_DTS,
X.UPDATED_BY_NM,
x.cks
from (
select
htmldb_item.checkbox(1,ECGEXST_ID) del,
htmldb_item.hidden(2,ECGEXST_ID) ECGEXST_ID,
htmldb_item.select_list_from_query (3, LEAD_CD,'select lead_cd , lead_cd from lslead order by display_seq ',15) LEAD_CD,
htmldb_item.select_list_from_query(5,ST_ID,'select lkup_dsc,lkup_id from lkup where lkup_grp_id = 17',25) ST_ID,
wwv_flow_item.display_and_save(6,to_char(ENTERED_DTS,'MM/DD/YYYY')) ENTERED_DTS,
au.LAST_NM || ', ' || au.FIRST_NM ENTERED_BY_NM,
wwv_flow_item.display_and_save(7,to_char(UPDATED_DTS,'MM/DD/YYYY')) UPDATED_DTS,
au1.LAST_NM || ', ' || au1.FIRST_NM UPDATED_BY_NM,
htmldb_item.md5_checksum(ECGEXDT_ID,LEAD_CD,ST_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
from ECGEXST,
app_user au,app_user au1 where au.MSPR_ID(+) = ECGEXST.ENTERED_BY_MSPR_ID and au1.MSPR_ID(+) = ECGEXST.UPDATED_BY_MSPR_ID
and ECGEXDT_ID = :P65_ECGEXDT_ID
union all
select
htmldb_item.checkbox(1,null) del,
htmldb_item.hidden(2,null) ECGEXST_ID,
htmldb_item.select_list_from_query (3,null,'select lead_cd , lead_cd from lslead order by display_seq ',15) LEAD_CD,
htmldb_item.select_list_from_query(5,null,'select lkup_dsc,lkup_id from lkup where lkup_grp_id = 17',25) ST_ID,
wwv_flow_item.display_and_save(6,null) ENTERED_DTS,
null ENTERED_BY_NM,
wwv_flow_item.display_and_save(7,null) UPDATED_DTS,
null UPDATED_BY_NM,
htmldb_item.md5_checksum(null,null,null,null,null) cks
from dual) x
UPDATE PROCESS:
declare
l_cks wwv_flow_global.vc_arr2;
j pls_integer := 1;
val1 varchar2(100);
val2 varchar2(100);
begin
-- Get original MD5 checksum
select wwv_flow_item.md5(ECGEXDT_ID,LEAD_CD,ST_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
BULK COLLECT INTO
l_cks
from ECGEXST where ECGEXDT_ID = :P65_ECGEXDT_ID;
-- Compare the original checksum, l_cks,
-- with submitted checksum, htmldb_application.g_fcs.
-- If they are different, raise an error.
for i in 1..l_cks.count
loop
if htmldb_application.g_fcs(i) != l_cks(i) then
rollback;
raise_application_error(
-20001,
'Current version of data in database has changed '||
'since user initiated update process.');
-- return;
end if;
end loop;
-- update ECGRSTST
for i in 1..htmldb_application.g_f02.count
loop
if htmldb_application.g_f02(i) is not null then
update ECGEXST
set
ECGEXDT_ID = :P65_ECGEXDT_ID,
LEAD_CD = replace(htmldb_application.g_f03(i),'%'||'null%',NULL),
ST_ID = replace(htmldb_application.g_f05(i),'%'||'null%',NULL)
where ECGEXST_ID = htmldb_application.g_f02(i);
else
if htmldb_application.g_f03(i) is not null then
insert into ECGEXST
(ECGEXST_ID ,
ECGEXDT_ID,
LEAD_CD,
ST_ID)
values
(ECGEXST_SEQ.nextval,
:P65_ECGEXDT_ID,
replace(htmldb_application.g_f03(i),'%'||'null%',NULL),
replace(htmldb_application.g_f05(i),'%'||'null%',NULL));
end if;
end if;
end loop;
end;
The first tabular form is working fine.But for the second tabular form i am getting the checksum error.I have created a test table and checked the checksum values.The checksum values are changing.
Here is the code of my 2nd tabularform:
select
x.del,
x.ECGEXT_ID,
x.LEAD_CD,
x.T_ID,
x.ENTERED_DTS,
X.ENTERED_BY_NM,
X.UPDATED_DTS,
X.UPDATED_BY_NM,
x.cks
from (
select
htmldb_item.checkbox(11,ECGEXT_ID) del,
htmldb_item.hidden(12,ECGEXT_ID) ECGEXT_ID,
htmldb_item.select_list_from_query (13, LEAD_CD,'select lead_cd , lead_cd from lslead order by display_seq ',15) LEAD_CD,
htmldb_item.select_list_from_query(15,T_ID,'select lkup_dsc,lkup_id from lkup where lkup_grp_id = 18',25) T_ID,
wwv_flow_item.display_and_save(16,to_char(ENTERED_DTS,'MM/DD/YYYY')) ENTERED_DTS,
au.LAST_NM || ', ' || au.FIRST_NM ENTERED_BY_NM,
wwv_flow_item.display_and_save(17,to_char(UPDATED_DTS,'MM/DD/YYYY')) UPDATED_DTS,
au1.LAST_NM || ', ' || au1.FIRST_NM UPDATED_BY_NM,
htmldb_item.md5_checksum(ECGEXDT_ID,LEAD_CD,T_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
from ECGEXT,
app_user au,app_user au1 where au.MSPR_ID(+) = ECGEXT.ENTERED_BY_MSPR_ID and au1.MSPR_ID(+) = ECGEXT.UPDATED_BY_MSPR_ID
and ECGEXDT_ID = :P65_ECGEXDT_ID
union all
select
htmldb_item.checkbox(11,null) del,
htmldb_item.hidden(12,null) ECGEXT_ID,
htmldb_item.select_list_from_query (13,null,'select lead_cd , lead_cd from lslead order by display_seq ',15) LEAD_CD,
htmldb_item.select_list_from_query(15,null,'select lkup_dsc,lkup_id from lkup where lkup_grp_id = 18',25) T_ID,
wwv_flow_item.display_and_save(16,null) ENTERED_DTS,
null ENTERED_BY_NM,
wwv_flow_item.display_and_save(17,null) UPDATED_DTS,
null UPDATED_BY_NM,
htmldb_item.md5_checksum(null,null,null,null,null) cks
from dual) x
UPDATE PROCESS:
declare
l_cks wwv_flow_global.vc_arr2;
j pls_integer := 1;
val1 varchar2(100);
val2 varchar2(100);
begin
-- Get original MD5 checksum
select wwv_flow_item.md5(ECGEXDT_ID,LEAD_CD,T_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
BULK COLLECT INTO l_cks
from ECGEXT where ECGEXDT_ID = :P65_ECGEXDT_ID;
-- Compare the original checksum, l_cks,
-- with submitted checksum, htmldb_application.g_fcs.
-- If they are different, raise an error.
for i in 1..l_cks.count
loop
if htmldb_application.g_fcs(i) != l_cks(i) then
-- val1 := htmldb_application.g_fcs(i);
-- val2 := l_cks(i);
-- insert into test2 (val_1,val_2) values (val1,val2);
rollback;
raise_application_error(
-20001,
'Current version of data in database has changed '||
'since user initiated update process.');
return;
end if;
end loop;
-- update ECGRSTST
for i in 1..htmldb_application.g_f12.count
loop
if htmldb_application.g_f12(i) is not null then
update ECGEXT
set
ECGEXDT_ID = :P65_ECGEXDT_ID,
LEAD_CD = replace(htmldb_application.g_f13(i),'%'||'null%',NULL),
T_ID = replace(htmldb_application.g_f15(i),'%'||'null%',NULL)
where ECGEXT_ID = htmldb_application.g_f12(i);
else
if htmldb_application.g_f13(i) is not null then
insert into ECGEXT
(ECGEXT_ID ,
ECGEXDT_ID,
LEAD_CD,
T_ID)
values
(ECGEXT_SEQ.nextval,
:P65_ECGEXDT_ID,
replace(htmldb_application.g_f13(i),'%'||'null%',NULL),
replace(htmldb_application.g_f15(i),'%'||'null%',NULL));
end if;
end if;
end loop;
end;
please help me in solving this.The same code its good for one tabular form and for the other it giving the checksum error.
Thanks in advance
phaniHi patrick,
Thanks for the reply i am getting the checksum error even if i used my primary key in the select statement of the MD5 checksum.
My primary key in the second tabular form is
htmldb_item.hidden(12,ECGEXT_ID) ECGEXT_ID
so i changed the process to:
for i in 1..htmldb_application.g_f12.count
loop
if htmldb_application.g_f12(i) is not null
then
select wwv_flow_item.md5(ECGEXDT_ID,LEAD_CD,T_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
BULK COLLECT INTO l_cks
from ECGEXT where ECGEXT_ID = htmldb_application.g_f12(i);
-- Compare the original checksum, l_cks,
-- with submitted checksum, htmldb_application.g_fcs.
-- If they are different, raise an error.
if htmldb_application.g_fcs(i) != l_cks(i) then
-- val1 := htmldb_application.g_fcs(i);
-- val2 := l_cks(i);
-- insert into test2 (val_1,val_2) values (val1,val2);
rollback;
raise_application_error(
-20001,
'Current version of data in database has changed '||
'since user initiated update process.');
end if;
end if;
end loop;
It's not possible to use BULK COLLECT to get the MD5 checksum of all >>>rows. Because the index positions in the MD5 array and the >>>apex_application.g_fxx array index will probably not match, especially if you >>>don't order or if you are on a second page.How come the first tabular form is running i used the bulk collect in the first tabular form
HERE IS THE CODE FOR THE FIRST TABULAR FORM:
-- Get original MD5 checksum
select wwv_flow_item.md5(ECGEXDT_ID,LEAD_CD,ST_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
BULK COLLECT INTO
l_cks
from ECGEXST where ECGEXDT_ID = :P65_ECGEXDT_ID;
-- Compare the original checksum, l_cks,
-- with submitted checksum, htmldb_application.g_fcs.
-- If they are different, raise an error.
for i in 1..l_cks.count
loop
if htmldb_application.g_fcs(i) != l_cks(i) then
rollback;
raise_application_error(
-20001,
'Current version of data in database has changed '||
'since user initiated update process.');
-- return;
end if;
end loop; -
when i boot (or try to) i get an error that says checksum error system defaults loaded...and then i can get into bios...after i restart the computer just spins fans and nothing else happens...i dont understand this because i just built two identical computers and one of them works...my psu is 400w...
mobo - k7n420
cpu - athlon xp 2100+
psu - 400w
ram - 128ddr kingston (Value bleh...)
geforce 4 4200
turtle beach santa cruzya - but half the time i cant get into the bios...
the leds in the back are on chipset initializing...and it just freezes there...
i dont get this i built the identical computer for my cousin and his works perfectly... :( -
I have been running a dbxml database for about 18 months now and recently (in last 2 weeks) I have been getting the following error message:
dbxml- getDocument c0104
1 documents found
dbxml- print
checksum error: page 4950: catastrophic recovery required
PANIC: DB_RUNRECOVERY: Fatal error, run database recovery
projectDatabase.dbxml: pgin failed for page 4950
stdin:3: print failed, Error: DB_RUNRECOVERY: Fatal error, run database recovery
dbxml- exit
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
PANIC: fatal region error detected; run recovery
Container - DB error during database close: -30974
File handles still open at environment close
Open file handle: projectDatabase.dbxml
Open file handle: log.0000025440
PANIC: fatal region error detected; run recovery
db_recover -c -P 0625g7Ui3 -f
recovery 85% complete
Running recovery does not make a difference. The only way to recover is to copy the replication client DB (which does not have these errors) to the master and restart the application. It only seems to affect random documents in the DB. All of the ones affected have not been modified in many weeks to months (they have been read but not written to in this time). Has anyone encountered this before? Does this indicate a hardware issue?
DougA check of our raid disks found parity errors at the time of the failures.
Thanks for your help.
Doug
Maybe you are looking for
-
Problem with SQL*Loader and different date formats in the same file
DB: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi System: AIX 5.3.0.0 Hello, I'm using SQL*Loader to import semi-colon separated values into a table. The files are delivered to us by a data provider who concatenates data from diffe
-
Before closing down the machine, how can I close all the open programs?
Now that the iMac automauically starts up with the programs in use when closing, I find that this is delaying my start. There must be a shortcut to close all the open programs before closing the machine. Kindly advise.
-
Thanks Neil. Though I have purchased Mountain Lion from Mac App stores before HD crash, this is not shown in the list of purchases.why? regards, [email protected]
-
I just updated my mbp with the icloud update and now my wifi signal bars in my menu bar stopped working and say that there is no airport card installed. I am connected to the internet through wifi just fine and the system preferences says that I am c
-
[Asynchronous] Which one is better FTP / Web Service
Dear Experts, For building asynchronous interface in PI, I prefer to choose IDoc if 1 of the party is an SAP system. For the other side of the party I've used FTP adapter to generate file which will be processed by PI into IDoc or vice versa. I've go