.dmg files and adobe

Hi,
I have tried downloading a trial version of Adobe Photoshop from their website and it says that it's unable to open the .dmg file. I have already tried to make it open with the diskimagemounter and that doesn't work. Anything?
Thanks

Try downloading it again. It also could be a corrupted file on their end.

Similar Messages

  • I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    Many Thanks, Kurt.
    I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
    I shall save it somewhere VERY safe now in case this happens again …
    You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
    Best wishes
    OllyanDinah

  • What is ACCD DMG file and what is it for?

    What is ACCD DMG file and what is it for?

    See the last post in this thread: https://discussions.apple.com/thread/2084745?start=90&tstart=0

  • Spool files and Adobe Files in SAP

    Hi,
    Is there away to be able to see spool files and adobe pdf files , using the same screen, Ie go through and view some normal sap spools and then view adobe files from a url?
    Many thanks

    You can see this sample driver program which use ADOBE form.
    You need to specify your function module name instead of (CALL FUNCTION '/1BCDWB/SM00000043') mentioned in this program. The function module is generated when you activate your Adobe form.
    sample code :
    DATA : is_customer TYPE scustom.
    DATA : it_bookings TYPE ty_bookings.
    DATA : iv_image_url TYPE string.
    DATA : iv_sending_country TYPE adrc-country.
    DATA : it_sums TYPE TABLE OF flprice_t.
    DATA : docparams TYPE sfpdocparams.
    DATA : formoutput TYPE fpformoutput.
    DATA : outputparams TYPE sfpoutputparams.
    PARAMETERS : pa_cusid TYPE scustom-id.
    SELECT SINGLE * FROM scustom INTO is_customer
    WHERE id = pa_cusid.
    SELECT * FROM sbook
    INTO CORRESPONDING FIELDS OF TABLE it_bookings
    WHERE customid = pa_cusid.
    outputparams-nodialog = 'X'.
    outputparams-getpdf = 'X'.
    *outputparams-adstrlevel = '02'.
    CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
    ie_outputparams = outputparams
    EXCEPTIONS
    cancel = 1
    usage_error = 2
    system_error = 3
    internal_error = 4
    OTHERS = 5.
    IF sy-subrc 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    docparams-langu = 'E'.
    docparams-country = 'US'.
    docparams-fillable = 'X'.
    CALL FUNCTION '/1BCDWB/SM00000043'
    EXPORTING
    /1bcdwb/docparams = docparams
    is_customer = is_customer
    it_bookings = it_bookings
    IV_IMAGE_URL =
    iv_sending_country = 'US'
    IT_SUMS =
    IMPORTING
    /1bcdwb/formoutput = formoutput
    EXCEPTIONS
    usage_error = 1
    system_error = 2
    internal_error = 3
    OTHERS = 4
    IF sy-subrc 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    CALL FUNCTION 'FP_JOB_CLOSE'
    IMPORTING
    E_RESULT =
    EXCEPTIONS
    usage_error = 1
    system_error = 2
    internal_error = 3
    OTHERS = 4
    IF sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Best Regards,
    Devesh

  • I am having trouble establishing file association between .PDF files and Adobe Reader.

    I am having trouble establishing file association between .PDF files and Adobe Reader.  When I click on a .PDF file, Adobe Reader does not open the file.  I installed Adobe Reader on a Lenovo G480 laptop using Windows 8.  When I attempted to open a file called I believe G480_user_guide.PDF, a file called something like Nitro_PDF opened.  When I right clicked G480_user_guide.PDF and chose Open With, I found that Nitro_PDF was the default program for opening the file.  I tried to change to another program but found that Adobe Reader was not listed.  I chose the option for searching the computer for a file to open.  I found the folder Adobe in Program Files x64 but I was not able to find an executable.  Where is the Adobe Reader executable or what other method can I use for establishing file association between .PDF files and Adobe Reader.

    Yes, I have now learned how to make a search with the Google search engine.  I am gradually learning how to use my new Lenovo laptop computer with Windows 8.  I learned yesterday that I can make a search with the Google search engine if I enter the search query in the address bar of the Google Chrome browser.  I think it was the Bing search engine that gave me the sites advertising Adobe Reader download but actually provided the download of a reader other than Adobe.
    In my opinion, Windows 8 is significantly different from Windows 7 and that it has hazards and pitfalls.
    I thank all of those who have replied to the initial inquiry.

  • My MacBook Pro came with Lion pre-installed so I can't re-download it from the app store. Is it possible to get the installESD.dmg file and how can I get it if I can't re-download Lion in Apple Store option?

    My MacBook Pro came with Lion pre-installed so I can't re-download it from the app store. Is it possible to get the installESD.dmg file and how can I get it if I can't re-download Lion in Apple Store option?

    FYI Mac OS X is not designed to be installed on additional Macs, unless you purchased it from the App Store, in which case you can make as many copies as you wish and install it on as many Macs as you own.
    From the Recovery Disk Assistant -
    Notes
    If the computer shipped with OS X Lion or Mountain Lion, the external recovery drive may only be used with the system that created it.
    If the system was upgraded to Lion or Mountain Lion purchased from the App Store, the external recovery drive can be used with other similarly-upgraded systems.

  • .dot Files and Adobe RoboHelp 9 for HTML

    I have a problem that I have been discussing with Adobe Technical Support for over a month now and I do not seem to be getting anywhere with them.
    The problem is this, I have a large help system that I have authored under RoboHelp 8 and Windows XP. In it I have 8 Single Source Layouts, 4 that generate HTML Web Help and 4 that generate Printed Documentation.
    When I used RoboHelp 8 it generated the printed documentation using Word 2007. My company recently upgraded all of our systems to Windows 7 and Office 2010 (64-bit) and when they did that I found out that RoboHelp 8 was incompatible with Word 2010, so I called up Adobe and they suggested I upgrade to RoboHelp 9, which I did. I now have Robohelp Version 9.02 on my new machine. Unfortunately, my RoboHelp project still does not generate all of the printed documentation the way I want it to.
    Initially, 3 out of the 4 Single Source Layouts generated printed documentation fine, but the fourth one actually caused a crash in Word 2010 and I received the complilation error from RoboHelp 9 that said "failed to generate Filename.docx" or something like that. I called Adobe Technical Support and they had me uninstall Office 2010 (64-bit) and install Office 2010 (32-bit). That solved the crashing problem, but the specific single source layout that caused the problem still doesn't generate the printed documentation correctly. There are missing pages and pages in incorrect order and ghost pages that I don't even expect to be there.
    The Support Desk person feels, and I believe he is correct, that it has to to with the template file that I am using. That template file is pretty complicated, involving macros and fancy styles. I did not create the .dot file myself, I came to the project after someone else had already done it, so I am not that familiar with how the template file was created. Moreover, the Adobe Technical support fellow also seems not to know much about Word template files, so at this point we are sort of at an impasse, where he is claiming that the problem lies in my .dot file, and I am claiming that even if that is the case, RoboHelp should work with all .dot files, and moreover, why does my template file work with 3 out of 4 of my single source layouts?
    Anyway, we need to break this impasse somehow, does anyone out there have any helpful suggestions?

    I think you are misunderstanding how the forum works. You say "your developers." Nearly all posts here are handled by users of the product, such as myself. Adobe staff do drop in from time to time and we always welcome their intimate product knowledge.
    Anything you regard as a bug or needing a feature change needs to be fed direct to Adobe.
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Downloading  dmg  file and  Mounting Failed ??

    hi,
    i might have messed up with the files on my ibook.
    i somehow deleted previous users account and created mine As Admin. ..... however deleted user account is in deleted user folder as dmg file.
    now when i log in my account as admin and download something > then Disk copier helper opens > then installation >> and finally Message comes .. Mounting Failed ( error 95 ).
    this happened when i tried to download and install dmg file from internt
    it also says that there is no file folder to handle this file
    How can i fix mounting problem on my User Account as Admin.
    thanks

    I'm on the same boat. I called Apple Support. They made me clean cache, create a new user, yada yada yada. Nothing helped. Last resort was to re-install OSX Snow 10.6.2
    I did so, doing an ERASE then moving files/programs back from Time Machine. Right after OS was just installed, I was able to download anything. After I did an upgrade to the latest combo patch to 10.6.2 I was back in "no download land"
    I have Google Chrome (no dice), FireFox (no dice)....
    Help! I don't want to have to re-install everything again!

  • Zip files and Adobe Acrobat files

    Hello all,
    I have a couple of kinda distinct questions that I wanted to ask. I hope I've chosen the right sub-forum to post them in. My questions are
    1) when I try to unzip a .zip file in my Documents folder I get the following error message
    "Archive Utility - unable to unarchive "CdnEnergy.zip" into "Documents". (Error 1 - Operation not permitted.)"
    ditto if I move it to the Desktop and try there. This doesn't seem to be a 'space' problem as my computer is very new and I haven't loaded it up with lots of stuff. I have unzipped this file before (admittedly not on a Mac).
    2) How can I set Adobe Acrobat to be the default application for .pdf files so that when I click on a pdf file it's opened by Adobe Reader rather than the Mac Viewer? I know I can select Adobe with a Ctrl+click, but can I set it so that it's always the default?
    Thanks very much for your help,
    Eoghan

    Welcome to the Discussions!
    The first problem is not obvious, but I would suggest using Disk Utility to repair permissions. Also, you could download the free Stuffit Expander to have an alternate unzip program.
    The second problem is easy. In the Finder, select a pdf file and then select File->Get Info. In the window that appears, select the Acrobat as the Open With application and select the option to always use this application.
    bd

  • Dmg file and finder issue

    Hi,
    Since I have upgraded my Macbook pro to Yosemite I have experienced several issues each time I have install/upgrade an application (.app file) from an dmg file.
    Example with calibre application from http://calibre-ebook.com/download_osx
    or google chrome.
    I have downloaded the latest version, then open the dmg image by double clicking on it (Because I have unchecked the default option "Open safe file after downloading" in Safari), but impossible to drag and drop the new app file in the Application folder. No error message is displayed.
    If I try to unmount the dmg file, then I get an error message.
    The only workaround I have found is to perform a Force/Relaunch of the Finder. Then everything is working fine!
    Any idea how to avoid this issue or is it just a bug?

    Double-clicking on a disk image (.dmg file) mounts the image (treats it like inserting a disk) and puts a disk icon on your desktop. Once this is done, you may treat that icon in most every respect as a disk (it's common to make read-only images, so you might not be able to write/copy files to it).
    In the case of installing an application, there are two basic procedures on a Mac:
    1.) Double-click on a package icon (looks like a stylized cardboard box) and a wizard will guide you through the process much like Windows users experience.
    2.) Find an icon for an application, and drag it to /Applications (click on the icon for it and hold the button down while you move it). If you don't have the Applications folder open, you can simply drag the icon onto the Macintosh HD icon and hold it there for a couple of seconds, then window will open and you'll see the Applications folder where you can drop the file (onto the Applications folder icon).
    To eject the disk image, simply click on the icon for the mounted image, and press command-E (E for 'eject'), right-click or control-click on the icon and select 'Eject' from the pop-up menu, or drag the icon into the trashcan on the dock.
    After you've unmounted the disk image, you can do whatever you like with the disk image file.

  • Canon MXF files and Adobe Premiere Pro CS5

    Ok I have searched every where for an answer to this problem but I cant find any answers. I have Master Collection CS5 and have just recently upgraded to a Canon XF 300 camera and a new PC with the following Stats
    Windows 7 Pro
    Intel i7 950 Quad Core Processor
    24GB Corsair DDR 2000mhz Ram
    Gigabyte X58A-UD3R
    Zotac GeForce GTX 470 Amp Graphics card
    Now I'm working on a 2 and a half minute corporate video using footage shot on the XF300 and 5 clips shot on the 7D. the footage looks amazing but thats not the problem the problem is that every time i load up the project now every time i scrub the timeline the pc freezes and the premiere crashes. I can't keep working like this, it also appears that Almost all of my 24gb is taken up.
    I have been working on the project today and i have only managed to move 2 shots the rest of the time the PC is frozen or adobe is restarting. This is becoming a major joke now, is this a bug and will it be fixed? as no one can work like this.
    I have a short film to start filming in a few weeks and im looking at having almost 200 shots to edit now at the moment I'm editing only 25 shots and adobe cant handle it how the hell am i going to edit almost 200?
    Any news or answers will help me out as im at a loss

    I have a system with the following specs...
    Motherboard:  ASUS P6X58D Premium
    CPU:                 Core i7 950 3.0GHz Quad Core with HT 8meg Cache (with Hyperthreading)
    RAM:                 Kingston 12 GB (3 x 4 GB)  DDR3 - Hyper X 1600 MHz 
    GPU:                 NVIDIA GTX480 (accessing the Mercury Playback Engine)
    OS:                    Windows 7 Professional 64bit version
    System drive:   1 x WD VelociRaptor WD1500HLHX 150GB - 10,000 RPM
    Media drive:     (RAID 10 setup) 4 x WD VelociRaptor WD6000HLHX 600GB - 10,000 RPM
    IO:                      Matrox MXO2 Mini with MAX
    Adobe Premiere CS5
    I've just played a 10 minute timeline with 12 layers of MFX files in realtime with no problems at all. It's only using 20% CPU and 45% RAM. I've done the same with different effects applied to each clip.The Mercury Playback Engine deals with the effects so they don't impact on the CPU or RAM usage. I'm not sure why I'm having success when you aren't. The Matrox MXO2 may possibly be a factor as that accelerates some processes.

  • Firefox won't save DMG files and won't mount the disk image. Why?

    When I try to install a download I am asked to either save the DMG file or Open using .... I select save, but the disk image never appears on my desktop and nothing shows in the Tools-Downloads window.

    See if this helps you: <br />
    http://support.mozilla.com/en-US/kb/Managing+file+types

  • DMG files and Windows XP

    I have an ipod touch and have installed the software. I notice I have some *.dmg files in a folder called C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\iPod Temporary Files\*.dmg.
    Do I need to keep these or can they be deleted?
    Thanks.

    Maybe this will shed some light:
    http://www.fileinfo.com/extension/dmg
    I don't know how you'd have some on Windows.

  • I downloaded Firefox 4, it came in as a .dmg file and won't open what will open it?

    when I double click on the dmg file I am question wh\at program do I wish to open in.
    I can't get to the firefox icon to drag to my applications folder

    You are not in the Safe Mode, you are in the Offline Mode. I don't know what OS are you on since it doesn't show in your system details:
    If you see a Firefox icon, click on it and then go to:
    File > UNCHECK the Offline Mode
    If you have a Menu Bar instead, do the same.

  • Mis-understanding dmg files and installing apps

    Hi All.
    I'm realizing I have never understood how to use a dmg properly and how to dispose of it.
    Normally I download some piece of software and I guess I double click on the dmg and it installs? Then I eject the dmg and it goes away?
    Sometimes when I click open a app I get a prompt that says that this file has been downloaded from the internet and do you want to continue. I /think/ this is accompanied by my seeing a dmg icon for the app on my desktop?
    I can't quite figure out if I have done something wrong when this happens.
    Can anyone help/
    TIA
    Jon

    I mount drive to see them but I just want to use the software and the dmg is just getting in my way.
    anyone know what i'm missing?
    If you are attempting to run (launch) the software you see on the dmg directly from that dmg, the finder isn't going to let you eject that dmg (e.g., dragging to trash, right-click dmg and eject) because the app on that dmg is currently open.  Is that what your problem is?
    We may be mis-communicating past each other here.  You open the dmg and drag its contents to some place and execute the app (or whatever) from that place, not the dmg.  Alternatively, you press the option key and while it is pressed drag the dmg icon to some place to make a copy of the dmg as a folder in the finder.
    Maybe I previously omitted the pressing of the option key when dragging the dmg icon.  Without the option key you would be making an alias which you don't want.  With the option key pressed, when you drag the dmg icon you should see a little plus sign on the icon pointer indicating you are doing a copy. Perhaps you were making an alias and trashing the alias which of course does not affect the mounted dmg icon image.

Maybe you are looking for