Dmg's problem remains after 10.5.1 (and Help problems)

I did a download-and-install of the 10.5.1 update. Immediately after, loaded up some dmg's, and found that the problem with unmounting was not fixed in this round. Every few attempts, clcking on the eject icon in the Finder sidebar causes the window to vanish, and the dmg is not unmounted.
And, trying to use Finder Help, it was unresponsive.
I had Console open during all this, looking at the windowserver log; the dmg problem showed up as:
Nov 15 17:57:23 [99] kCGErrorIllegalArgument: CGXGetWindowWorkspace: invalid window id: 5a
Help's ailments shows up as:
Nov 15 18:06:53 [99] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x6 not owned by caller Help Viewer
Nov 15 18:09:55 [99] kCGErrorIllegalArgument: CGXSetTrackingAreaOption : Invalid tracking area
Maybe after 10.5.2 this will go away??

Sorry to hear that. There seem to be several others with the same problems who have posted to this forum.
As for the window closing while trying to unmount, activate something other than the disk you want to unmount (say your internal hard drive), then click the eject button for the drive you want to unmount, this will at least keep the window open.
For unmounting, try the command line unmount solutions at
http://discussions.apple.com/thread.jspa?messageID=5808848&#5808848
Perhaps the next update will fix it, so until then, leaving them mounted till the shutdown seems to be the solution (hopefully the command line fixes it for you).

Similar Messages

Lost all bookmarks after upgrading to FF4 and help page solutions no help

Upgraded to FF4. All was well for the first few days then all of a sudden my bookmarks were gone. I've been through all the topics on the help page and still cannot access any bookmarks or even add new bookmarks. Bookmarks is just totally disabled. Went back to IE but hate how slow it is. I just want to be able to create new bookmarks if I can't find my old ones.

See my solution at http://discussions.apple.com/message.jspa?messageID=11757732#11757732
It's pretty much guaranteed to work if it's at all possible to recover your contacts, although other simpler solutions may work too and some are discussed there.

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

HT1430 My ipad2 shut down randomly and than start. Problem is remain after reset. Please help!

My ipad2 shut down randomly and than start. Problem is remain after reset. What is the solution.

You can try restoring your iPad as new using iTunes on your computer. This will load a new copy of the iOS software onto your iPad.
If this doesn't work you may have a hardware problem and will need to contact Apple Support.

Macbook 2008 4,1 serious problems after 10.6.8 and 1.4 firmware update

I'm having a problem with my 2008 2.4Ghz Macbook. After doing a fresh install of 10.6.0 with a Retail DVD, the MB was working perfectly, absolutely no problems at all. I then ran Software Update and installed all the recommended updates to 10.6.8, and I only noticed in passing that there was a Firmware update to do too, as reported by Software Update. I ran that as well and, IIRC, it was applied after fully updating to 10.6.8 and after rebooting twice. The MB rebooted, ran the Firmware update (which seemed to complete fine, as the progress bar completed normally against the grey screen), then rebooted. Again, IIRC, after running the Firmware update, and I'm now at 10.6.8, I started a Repair Permissions and left the MB for a while. It was the next day, maybe 15 hours later, when I went back to the MB and it was in Sleep. I pressed a key to wake it and this is when the weirdness started.
The screen was "fuzzy", sort of out of focus, though I could see the desktop, and what I could see was: the Disk Utility window open on Repair Permissions (which had completed normally) and several Vertical Segmented Bars running across the bottom part of the screen, at about the height where the Firmware Update progress bar was. These bars were filling in from left to right. IIRC, it may have looked a little like when you wake from Deep Sleep (or Hibernate, or whatever it was called). Like when you Wake from Sleep after the battery has run out and then you plug the AC adapter in.
Anyway, before the Vertical Segmented Bars progress was completed, the screen went black. Pressing keys didn't bring the desktop back.
I did a forced shutdown, reset the SMC, then rebooted. No startup chime. The Superdrive, hard drive and fans spun up, but the screen remained black. After a few reboots, I got a desktop back, and tried to reinstall from both an external HD (with Restored disk image) and the Retail Snow Leo DVD. Both times, the MB booted to the startup screen: with the external HD, I held down Option and chose the Snow Leo install; with the DVD, the MB started normally while I held down the C key. The boot started from the HD and the DVD, but after about 60 seconds, with Apple logo and the spinning "cog wheel", the screen went black. And seemed to shut down. With the external FW hard drive, the drive made a loud click, its LED went off, then it came back on after a few seconds, as if it had lost all power to it, then the LED lit up when power returned to it from the shut down MB. Anyway, the installs failed.
I then attached the 2.4 MB to another MB (2.1) in Target Disk Mode and it booted fine into TDM. It showed up on the 2.1's desktop, I ran Check Disk and it checked out okay. I then looked under Startup Disk and the 2.4's disk was listed there, with 10.6.8.
I then booted the 2.1 from the 2.4's disk and it booted fine. I ran check Permissions, and a huge list of permissions to repair came out. At this point, I've left things as they are. The 2.1 is booted from the 2.4, the latter used as external boot HD.
I then replaced hard drive and RAM. Tried to boot from DVD and install, got to Apple logo and spinning cog wheel, but after about 2 minutes the screen went black.
I then connected an external monitor and rebooted from the DVD. The external display received a video signal and I got to the Snow Leopard install screen. All this time the Macbook display has remained BLACK.
I went to Disk Utility and reformatted the new drive, then started the installation, which completed fine. The Macbook runs normally connected to the external display.
Any thoughts?
Why would the Macbook display work fine at boot (Apple logo, etc.), but then cut out after about 2-3 minutes?
Why would the Macbook screen remain black while I got a video signal on an external monitor?
Does this sound heat-related in some way? I should note that while booting from the DVD and now installing Snow Leopard, the fans are going pretty fast.
I just want to point out that this was an absolutely pristine, impeccable Macbook until these recent problems. It is in fantastic condition, none of the usual chips out of the top case and trackpad area. After the latest fresh install of 10.6.0 it was perfect upon reboot. Fast, perfect Airport and Bluetooth, FW and USB worked perfectly with a FW drive and USB mouse I hooked up. The update to 10.6.8 via Software Update seemed to complete fine.
Then all the problems started AFTER THE FIRMWARE UPDATE.
I don't know how much stock can be put in the firmware update being the cause of the problems, but the sequence here would bear that out. These are also somewhat unusual problems, at least in my experience.
One of the odd things was when I first went to wake the Macbook after the firmware update: the "fuzzy", out-of-focus screen and the segmented progress bars. And it was just before the segmented bars completed progress from left to right that the display cut out and went black. And from that time on, I've had the aforementioned problems.
Any ideas or links to similar problems would be greatly appreciated, e.g. possibly firmware related, or where the Macbook screen works but goes black after a couple minutes. And now that I've been able to connect to an external monitor, it would seem that the video signal is okay too.
Thanks.

Just to update.
After leaving the Macbook unplugged and without battery for a few days. I reset the SMC and, with no battery installed, I've just now rebooted and:
1) the first time, it booted, but no chime, and when the display turned on, once again I got the "out of focus" desktop AND the segmented vertical bars on the desktop (and the bars were filling in from right to left); the display went black after about 10-15 seconds;
2) I shut down and swapped some different RAM, then reset the SMC again and booted without battery. This time I got the boot chime and the Macbook booted to the Apple logo screen and spinning cogwheel. After about 2 minutes, the cogwheel stopped spinning, as if to boot to the desktop, but then the display went black. The front light started to pulse after about 10 seconds, and the Macbook appeared to be in Sleep.
3) I woke the Macbook from sleep by hitting a few keys and this time it went to the desktop. This is the first time it's gone to the desktop since the problem started.
I had enough time to see that everything appeared normally on the desktop, such as the time and date, Airport was connected, etc. And then the display went black again, after about 10 seconds.
At this point, I can now always get to the desktop, but the display goes black after about 10 seconds. I have just enough time to press a few keys and the Macbook does respond.
4) I shut down and reinserted the battery. Here's where new problems show up.
With the battery inserted, and the Macbook in sleep, if I hit a key, the DVD spins up as the Macbook is waking, BUT now the front sleep indicator light FLASHES (blinks) 5 TIMES. No beeps.
The Macbook still gets to the desktop, like before, and the screen goes black after 10 seconds.
I found some info on the Apple site re. 5 flashes (Article 21502):
If you don’t hear beeps, but the sleep indicator light flashes five times when you start it up or wake it from sleep, its battery may need service. Take the battery to an Apple Authorized Service Provider, such as an Apple Retail Store.
For more information, see the Apple Support article below.
You can continue using your computer before you service the battery. Use a different battery, or connect the computer’s power adapter and plug it into a power source.
Note:If you use your computer without a battery or with a faulty battery, you could lose all unsaved changes if it’s unplugged while it’s on.
BUT, the battery is not defective, as it works okay in another Macbook.
I should also point out that the problem with the 5 indicator light flashes or with the battery did not exist before the 10.6.8 and the Firmware 1.4 updates.
Any ideas?

Authorization problems after patch 6 upgrade and re-install

Hello everybody.
I had a perfect working Visual Composer installation.
After patching it, I got an 401 message, stating that I do not have authorization to view this page:
HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.
Uninstalling and reinstalling didn't bring me much further. It seems to be an Internet Explorer and/or IIS 6.0 related problem.
Of course I followed the very valuable note 804996, but the problem remains...
Can anyone help me out?
Thanx.

Hi all.
I resolved my own problem.
Additional to the permission settings as they are explained in note 804996, you must add the Directory Security - Authentication & Access Control, set to Integrated Windows Authentication.
Otherwise Windows NTFS security will block you.
Gr.,
Marc.

I am having a problem where pdf files on the web (i.e., links in a Word doc) open after an extended time and only as gobbldygook ( a file containing a series of characters and letters that make no sense). This also happens for another Mac user coworker

Hi There: I am having a problem where pdf files on the web (i.e., links in a Word doc) open after an extended time and only as gobbldygook ( a file containing a series of characters and letters that make no sense). This also happens for another Mac user coworker in my office, while the PCs don't have this problem... Any help/suggestions for a fix would be most appreciated!

Just adding more info - MacBookPro running 10.5.8 and using Safari as the browser. The problem comes and goes - sometimes the linked Word files will open OK, n others its just a strring of crazy characters...

Airport problems after 8/12 airport and security update

My MacBook Pro which had been working flawlessly since I got it last year received the airport and security updates distributed today. After the reboot my airport turns itself off after a few minutes and will not come back on and the computer seems to be running hotter than usual. Booting from a recent clone of the drive without the updates did not fix the problem and the card turned itself off a few minutes after the reboot and will not come back on.
Anyone having similar problems after the update?

Does your problem occur only when unplugged. If so, then maybe this update is for you: http://support.apple.com/downloads/AirPortClient_Update_for_MacBook_and_MacBookPro. Check it out, but use your own judgment in installing; not much info is provided.

Quicken 07 remains after Archive and Install?

Will the Quicken 07 application AND all my accounts remain after doing Archive and Install? I mean, will they be up and ready to use or need to be located in a folder and re-installed?

On an "Archive and Install", you have the option to save user data and network settings. This will copy all your user data into the home directory on the new install, and make the install process as seamless as possible. Applications are copied over as well, I believe, but if they're not they are left in the "Previous System" folder and you can copy them over manually and test them out. I believe "Quicken" is one of those applications where you just drag it to the applications folder to install it. As such, it should migrate to the new system easily and be up and running without the need to reinstall it. Most apps that require reinstalls are those that put extensions and plug-ins into the system folder (Adobe CS3, for example). Some things to keep in mind:
Corrupt preference files can cause applications to run funny or not at all. If an app doesnt behave normally then remove the preference file for that application from your user library. Corrupt preference files can happen during an install, so its good to be aware of the possibility they might crop up.
In a similar manner as corrupt preference files, sometimes the install process can change the permissions on files and folders, which will result in the same funky behavior. Using Disk utility to fix permissions BEFORE and AFTER the install will greatly reduce the probability of this being an issue.

I have problems with my films that become slightly jerky after I have imported and edited them in iMovie and then burned them onto a DVD using iDVD. I can see the weak jerkiness when panning in both laterally and vertically. I shoot with a camcorder Canon

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

After making a movie and wanting to burn a DVD, I go for iDVD in the 'DEEL' menu. Then I get the question ' where is iDVD? What is the problem?

After making a movie and wanting to burn a DVD, I go for iDVD in the 'DEEL' menu. After couple of seconds I get the question ' where is iDVD?
What is the problem? I cannot find iDVD in the programs map.
regards Tonl

The current Apple thinking is that the entire world has access to fast broadband and wants to distribute home movies to friends and relatives via download (iCloud) rather than mailing them a DVD. The fact that nothing could be further from the truth has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. That worked for some, but is now said to have been withdrawn by Apple. Also, you can complain bitterly here, perhaps suggesting that Apple could have provided a choice between using iCloud and burning DVDs:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that comes with OS 10.7 Lion (which also omitted iWeb) or will come with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD.

Hi.. I got some problem when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

Hi.. I got some problem when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

Hello:
I am not being critical, but you seem to want Safari to behave exactly like Chrome. Every software developer has a plan. Sometimes features in one product parallel other products - sometime not. There might be some things available that would help you. Do not hold your breath, however, for suggestions from people who use these forums. Most of us use (and like) Apple products. If you wish to make suggestions for future improvements, there is a feedback area on this web site that Apple employees read/review.
Candidly, your approach would be akin to suggesting that Apple emulate the "features" in Windows (heaven forbid).
I use Safari (and have for years). I use Firefox (not a bad product) as my alternate browser.
Sorry for what appears to be a pedantic lecture. However, I think most of us adapt to different products if we really want to use them.
Barry
Message was edited by: Barry Hemphill

Why does the old iphoto library still remain after the upgrade? Takes up HUGE space on my laptop

Why does the old iphoto library still remain after the upgrade? Takes up HUGE space on my laptop

Why does the old iphoto library still remain after the upgrade? Takes up HUGE space on my laptop
Actually, it only looks like it takes up additional space. The file size shown is misleading. When you migrate an iPhoto library to Photos, both libraries will show the media files using hard links. The actual file content of the image files and videos is shared by hard links:
See this linked document: Photos saves disk space by sharing images with your iPhoto or Aperture libraries - Apple Support
You will gain no free storage at all by deleting either the iPhoto Library or the Photos library. So keep both libraries until you are very sure, that Photos is working well on your Mac and your iPhoto library has been migrated correctly. Also, check, if you like the workflow in Photos. It is very different from iPhoto and some iPhoto features are not supported.
There will be no easy way back to iPhoto, if you delete your iPhoto library or the iPhoto application. Apple does not sell it any more.

After Effects CS6: Cache and Reload Footage Problem

After Effects CS6: Cache and Reload Footage Problem
I am having trouble getting my footage to update in an AE project.
In an existing project, there is an image sequence in a composition. I have saved and closed AE, modified the footage (same dimensions and qty. of frames, only the pixel data changes), and then re-launched AE and opened the project. Though I have changed the footage, the old content still appears.
To resolve this, I have done the following:
Edit>Purge>All Memory
Edit>Purge>Image Cache Memory
Edit>Preferences>Media & Disk Cache>Empty Disk Cache
Edit>Preferences>Media & Disk Cache>Clean Database & Cache
From the Project window I've selected all footage and selected Reload
None of these got the footage to update. I could double-click on the footage in the project bin and scrub the play head and the old footage was still displayed.
Finally I had to replace the footage with itself and that resolved the issue.
If this is operator error, lack of understanding the cache functions, or something else, I'd appreciate some assistance. I don't recall this behavior in CS 5.5, so I am guessing this is a change in CS 6.
Win 7 Pro 64bit Service Pack 1
Intel Xeon CPU X5450 @ 3.00 GHz 2.99 GHz
RAM 20 GB

about Illustrator and Photoshop files in CS6 especially - you should work with Ctrl/Cmd+E (Edit Original).
when in Ae and you want to change a source file, use this command on one of the layers
from the source file you wish to change (doesn't matter if its in the timeline or project window) and
your original software linked to that file will open.
when you work this way you make AE reload that file and any change after that will be seen back in AE immediately.
it is also very convenient way to work because there can be no confusion on which file you are on
if you work with multiple source files for example.
even if you made the change with your Photoshop/Illustrator opened file and got back to Ae
and didn't see any change - press on one of the layers Ctrl/Cmd+E and this will refresh it immediately.
This is the case in CS6.
in CC I have noticed that any change I make is refreshed immediately in Ae as if it rechecks the changes all the time,
and didn't even need to use Ctrl/Cmd+E but it's a good habit all the same.
didn't come across a case where that didn't work for be but
if all fails you could always change the folder location of the file, let Ae lose it, then replace footage of the file,
and thus let Ae re-link it back.

Hi, I got a big problem. I restored my mac and after I erased everything and started to restall the system, it showed I need to give the apple ID that was purchased the lion. The problem is that I lost my CD, and I don't have an ID with lion purchased

Hi, I got a big problem. I restored my macbook pro and after I erased everything and started to restall the system, it showed I need to give the apple ID that was purchased the lion. The problem is that I lost my installing CD, and I don't have an ID with lion purchased, so what should I do? Do you sell the system software?

This is a user forum; we're not  Apple.
Please contact the Apple Support folks directly for issues related to hardware and software purchases.
The particular model of MacBook Pro is a key detail here, as the Mac model will determine the oldest version it can boot, as well as whether it'll boot more current software.
AFAIK there is and was no Lion installer DVD available. It was a download. AFAIK, the last DVDs commonly available were for Snow Leopard 10.6. Snow Leopard DVDs are still available in the Apple online store in various countries, if your MacBook Pro is old enough to be able to boot that version.
If your MacBook Pro purchase with Lion wasn't registered with Apple, then you'll have to discuss this directly with the Apple Support folks, or repurchase Lion from the Mac App Store (which will usually involve a call to Apple for a redemption code as it's old software), or you'll "purchase" (it's free) Mavericks OS X 10.9 and wipe and install that assuming your MacBook Pro supports Mavericks. If you didn't purchase the MacBook Pro from Apple (and it was shipped with an older release), then you'll end up acquiring a redemption code from Apple for Lion, or installing Mavericks.
For completeness and given you're probably already aware of this, the usual approach for restoration with recent OS X versions is via the recovery boot (more details). If the disk is wiped and you can't get Lion, then you'll probably end up reinstalling with Target Disk Mode using another Mac with a compatible FireWire or Thunderbolt port and a cable. Or visit the local Apple Store.
sputniki: Once OS X 10.7 or 10.9 has been reinstalled, yes, getting Time Machine configured and going is undoubtedly on the agenda. But had there been a viable backup here, I expect jianghua would have used it.

Dmg's problem remains after 10.5.1 (and Help problems)

Similar Messages

Maybe you are looking for