DMIS 2010 SP10 replication is not clearing the logging table

Hello,
We have installed the DMIS2010 SP10 on our test environment and for some table the replication is getting extreme slow. Initially I had a case when I started to load a new table and all the logs collected during the initial load was not processed after the load turned into replication. Every new entries to the table were replicated to HANA but the entries which were created during the initial load were still in the logging table.
After a while some other table got this issue, entries got left in the logging table and no replication done to HANA for those lines.
In the ltro I see really high latency for these tables where the replication is not ok.
Did anybody had similar issue?
OSS is opened, but no reply yet from SAP, so any help would be appreciated.
Thanks for any advice
Tamas

Hi Tobias,
we need to upgrade the ECC kernel to be able to use DMIS2011 and that is not possible at the moment due to other dependencies. I requested our basis team to review the notes, maybe they missed to install any.
BR
Tamas

Similar Messages

Not clearing the job queue

Hello everyone,
We've been experiencing some oddities in our database and we hope to find some help around here. The scenario is as follows:
Our job queue shows 13 pages of jobs, updated in the last 5 days, in which we find lots of jobs - actually most of them from 3 days ago - with the progress showing "transcoding clip" and the status as "RUN".
When we try to cancel any of those jobs we get an error message that says: "Error cancelling - this job is currently not running".
We have tried flushing the event queue from Terminal using the following commands:
fcsvr_client flushresponsequeue
fcsvr_run psql px pxdb -c "vacuum analyze verbose;"
but none of them solved our problem. We cannot clear the event tables in the db (pxevent and pxeventresponse). We have even tried a more desperate solution by accessing the db via Navicat and manually deleting each and every row (!!!), visually clearing the tables.
BUT on the next day they did reappear and on the day after double in quantity (i.e. empty table --next day--> 4K rows --next day--> +4K rows and so on...).
So now we have 18,826 entries in our table which seems to grow indefinitely (and for no apparent reason).
We fear that our problem may get worse and cause us bigger problems. Any help would be very appreciated.
Details of the system: FCS V1.5.2 / Mac OS X (10.5.8)
Thank you in advance,

Hey guys, thanks for the replies.
the issues with the "pxevent" and "pxeventresponse" tables seems to have been solved BUT the issue with the Job queue remains the same.
Old (1 day old or more) jobs are showing status as RUN although when you try to delete it you get an error message which says "error cancelling - this job is currently not running" despite the fact it is shown as running. When you "get info" on any of those, you can see in the logs that it has failed and retried, then failed again (on the retry). This condition should make the status change from RUN to FAIL but it is not what's happening.
All this ends up putting some recently added jobs on a WAIT status which ends up kind of locking my queue (therefore preventing jobs from running, timming them out and, consequently, failing them). If I go to the "pxjobs" table and delete all entries it solves the symptom (as it was well said by one of you) but the problem doesn't cease to happen.
I can force the waiting jobs to run now but they end up failing too.
Any thoughts on that? I have some print screens but don't know if I can post them here (newbie on this forum, sorry ).
Thanks for your attention

MR11 not clearing the GR/IR account done in foreign currency.

Hi Experts,
I have an issue and that is with the MR11. The MR11 is not clearing the GR/IR account for those purchase orders which are raised in foreign currency and consequently MIGO and MIRO too in the foreign currency however there is no quantity variance. There is no problem with local currency.
Can you please let me know what could be the problem.
Rgds,
BABA

Hi
Please maintain the GR/ IR accont with only balances in Local currency then you will be able to clear the account
goto FS00 , enter the GR/ IR account , enter the Compnay code Click on change & Clcik on the tab Control data , here flag the Only Manage Balances in Local Currency
This needs to be flagged for GR?IR account to avoid such problems
Thanks & Regards
Kishore

Copy opening does not clear the destination data - Just appends

Hi All,
Copy opening does not clear the destination data. It just appends so if i run the copy opening package twice i can see the signed data get doubled.
We have SAP BPC NW 7.5 SP08 Patch 1001.
I working on the Periodic Application.
Copy opening Script logic:
*FOR %TIME% = %TIME_SET%
*RUN_PROGRAM COPYOPENING
CATEGORY = %CATEGORY_SET%
CURRENCY = %CURRENCY_SET%
TID_RA = %TIME%
OTHER = [B_ENTITY=%B_ENTITY_SET%]
*ENDRUN_PROGRAM
*NEXT
Carry-forward business rules
Source account : BALANCE SHEET ACCOUNTS
Source flow : F99
Dest account :
Dest flow : F00
Reverse sign : FALSE
Data source type : ALL
Same period      :FALSE
Apply to YTD : False
Category dimension:
ID               ACTUAL               BUDGET
EVDESCRIPTION          Actual               BUDGET
PARENTH1
YEAR               2008               2011
COMPARISON          BUDGET               NBUDGET
STARTMTH               1               1
CATEGORY_FOR_OPE                    ACTUAL
FX_SOURCE_CATEGORY
RATE_CATEGORY
RATE_YEAR
RATE_PERIOD
FX_DIFFERENCE_ONLY
OPENING_YEAR
OPENING_PERIOD
OWNER               [ADMIN]               [ADMIN]
STORED_CALC
REVIEWER_CAT
Appreciate any help.
Regards
Mehul

Snote 1620613 has fixed the issue
Regards
Mehul

I have a iphone4. I can not clear the apps at the bottom of the screen?

I have a iphone4. I can not clear the apps at the bottom of the screen?

Along with what Tidbits has stated, there are som apps which cannot be deleted or even disabled(and hidden) as you can do on an android device. The best you would be able to do is place them all in a folder together and ignore them.

HT4642 I use numbers with excell 2010, but it does not show the drop tabs, just a number, is this fixable?

I have a iphone5 and trying to use numbers with it, I use excell 2010, but it will not transfer the dop down boxes on excell 2010. Is this fixable or what?

Welcome to Apple Support Communities
The first Mac with Thunderbolt was the Early 2011 MacBook Pro. If you have got a 2010 MacBook Pro, you have got Mini DisplayPort instead of Thunderbolt, which are the same, but Mini DisplayPort can't be used to connect external disks.
To check which MacBook Pro you have, open  > About this Mac > More Info, and you will see the MacBook Pro model. If it's Mid 2010 or older, you haven't got Thunderbolt, so you have to connect the external drive through USB

Dataguard MRP not applyinig the logs

Hi All,
Database version - 10.2.0.4
Primary is 3 node RAC
Standby is non RAC
Its a physical dataguard configuration..
Archive logs are skipping from primary to standby server, but MRP process is not applyinig the logs properly..
Could not see any errors in the alert log..
PROCESS STATUS CLIENT_P SEQUENCE# BLOCK# ACTIVE_AGENTS KNOWN_AGENTS
MRP0 APPLYING_LOG N/A 4990 1586 0 0
Restarted the MRP and also bounced the standby, but still its showing as applying log for 4990 seq.
Alert log entry
Thu Apr 7 10:15:30 2011
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT FROM SESSION
Thu Apr 7 10:15:30 2011
Media Recovery Log /log1/archivelog/2_4990_722434300.dbf
After this stage, it is not moving forward.. Please advise..
Thanks & Regards,
Rakesh
Edited by: Oracleappsdba on Apr 7, 2011 8:33 AM

Hi...
No network failure...infact there are two database in the same servers and for one database we dont have any issues.
Both the databases have same configuration..
Two week's back we added third node to the primary RAC cluster, after that for 1 week we not had any issues and this issue started coming this week.
We recreated the standby control file and added third thread standby log after the third node addition.
This issue is a intermediate issue, some time its going smooth and some time its stuck and after several minutes it starts applying the log.
We dont see any errors in the primary and standby alert logs...
Thanks & Regards,
Rakesh

"Could not load the system tables" when installing the MAXDB DB instance

Hello,
We have an error when we are installing the MAXDB 7.5 for Netweaver 04's Unicode Kernel.
The central instance is installed, but when we launch the DB Server, in the step 14/25 Activating the DB, the follow error ocurrs.
"ERROR 2007-03-12 11:44:21
MDB-07048 Could not load the system tables. Check the files 'dbm.prt' and 'dbm.ins' in the run directory of the database (search fo
r "load_systab") or call the Support Center."
the file dbm.ins is not found, but the file dbm.prt have:
2007-03-12 11:44:14 0x00000a94              0 DBM      command load_systab
2007-03-12 11:44:14 0x00000a94 ERR     -24964 DBM      ERR_EXECUTE: error in program execution
                    0x00000a94 ERR     -24964 DBM      256,/sapdb/XIP/db/bin/x_python /sapdb/XIP/db/env/lsystab.py -R /sapdb/XIP/db
-d XIP -u SUPERDBA,*.
I search information in OSS, but we can't found solutions.
Best Regards, Alberto.

Hello Alberto,
if you're an SAP customer, can you open a message about this error, and enter a service connection into the MAXDB server?
Thanks,
Ashwath

System not clearing the Payment request items with the payments

HI Everybody,
User getting an issue relating to clearing of the payment request items. In a particular Contract account, it has got 51.75 Pounds of Bank Giro incoming payment. It has contains some 5 items of payment, 3 items of 10.75 and 1 Item of 21.70. The 3 items of 10.75 were cleared 3 payment reqquest items and since there is no due payment requests were there at that time, this 21.70 was showing pending credit item. After two days two payment requests came as due. There are jobs which run daily for FPMA. But this 21.70 is not clearing to this due payemnt requests. I tried to run this FPMA manually for this contract account. But these were not cleared.
Could anybody suggest anything on this why these items were not clearing against each other?
Thanks & Regards
Siva

Hi
The issue is due to the implementation of support packs. Specifically to do with note 1005708.
siva

CUBE IS NOT CLEARING THE DATA ON CONDITIONAL SCRIPT(ISSUE WITH NULLIFICATIO

Hi,
I am using AWM 10.2.0.2.0A and database is 10g Release 2 to build a cube.
Before the monthly incremental load I need to clear the old data.
For clearing(Nullifying) the cube I am using the new "Clear" command.
The Clear command has two options.
A) clear all the data without using any limits and
B) clear the current status. The option A is working perfectly fine. The issue
is when we need to clear only two months of data from the cube and I am using
Clear STATUS (option B )option.
After the execution data is not cleared (cube
is still showing the old data)
Please find below the program...............
(The cube is compressed and partitioned by year)
shw tod
aw attach olap_cview rw
limit ORA_PAX_AGT_PRT_MEASDIM to all
limit ORIGIN to all
limit DESTINATION to all
limit FAREBASIS to all
limit POS to all
limit DIS_NON to all
limit int_onl to all
limit airline to all
"lmt time to v_time
lmt time to '01/01/2005'
rpr time
"clear all from ORA_PAX_AGT_PRT_TOPVAR *** all data is deleted inspite of the
above limit
clear status from ORA_PAX_AGT_PRT_TOPVAR *** Nothing deletes
upd
cmm
dfn junk vrb integer
junk=1
upd
cmm
junk=2
upd
cmm
dlt junk
upd
cmm
shw tod
Any one can help me what I have to do to clear the cube.....................

Hi Thanks for the input,
I have question.
I saw your program and my program whatever I submit in the discussion earlier.
I also using JUNK=1 keyword in my program . The only difference in your program and my program is
I am declare and assign JUNK=1 after the upd and commit ,In your program its immediately you are decalring and assing JUNK=1 after the clear status and two times JUNK=1 is assigned.
Please clarify me is this will make any difference to giving the JUNK=1 immediately after clear status and after clear status,up,command....??
In your program
================
clear status from ORA_PAX_AGT_PRT_TOPVAR *** Nothing deletes
dfn junk vrb integer *** need these lines (only second one if junk exists)
junk = 1 *** to work around clear/update bug.
upd
cmm
junk=1
upd
cmmjunk=2
upd
cmm
dlt junk
upd
cmm
shw tod
In My program
================
clear status from ORA_PAX_AGT_PRT_TOPVAR *** Nothing deletes
upd
cmm
dfn junk vrb integer
junk=1
upd
cmmjunk=2
upd
cmm
dlt junk
upd
cmm
shw tod
This is my query...This update will helpfull for me to before proceeding my test...
Thanks ,
Nat

Payment run - should not clear the open item but should post payment doc

Hi Gurus,
Can you please help me , on how to acheive like when payment run F110 post the payment doc it should not close the open item rather keep that open item as open item , but hsould be be paid by payment doc posted through payment run F110.
Have any one of you had similar requirement ..? FICO gurus help me to acheiev this .. any exit /BADI ..or ideas..
Appreciate your help in advance

HI ,
Thanks for your reply , but still I am not clear on that.
reason they want to keep this open to be kept as open item , so that item will be picked up by dunning run ..
Basically the open invoice is being cleared by payment doc which was generated by payment run. If we look at BSEG in the open item record BSEG-AUGBL = will have the clearing doc number , and in addition to that BSEG will have created another record for the clearing doc as well .
May be since open invoice record is being updated with clearing doc (AUGBL ) , I belive its not shown up as open item .
Somehow this item should be kept as open item ... that is the req and also paid item payment reference should be transfered to Bill of exchange as well.
Hope you have clear background of my req...
Tnanks in advance ,

MQ Adapter does not clear the rejected message from the queue

Hi All,
I'm using a MQ Adapter to fetch the message from the queue without any Backout queue configured. However, whenever there is any bad structured message found in the queue, MQ adapter rejects the message and moves the message to the rejmsg folder but does not clear it off the queue, as a result of which it keeps retrying the same hence, filling the logs and the physical memory. Somehow we do not have any backout queue configured so I can move the message to blackout queue. I have tried configuring the jca retry properties and global jca retry as well but to no avail.
- Is it not the default behaviour of MQ Adapter to remove the rejected message from the queue irrespective of Backout queue is configured or not? The same behaviour working well with the JMS and File Adapter though.
- Is there any way I can make MQ Adapter delete the message from that queue once it is rejected?
Regards,
Neeraj Sehgal

Hi Jayson,
Check this URL which answers a problem with com.sap.engine.boot.loader.ResourceMultiParentClassLoader problem:
http://209.85.175.132/search?q=cache:RnFZ9viwuKkJ:https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.sdn.folder.sdn!2fcom.sap.sdn.folder.application!2fcom.sap.sdn.folder.roles!2fcom.sap.sdn.folder.navigationroles!2fcom.sap.sdn.role.anonymous!2fcom.sap.sdn.tln.workset.forums!2fforumtest!2fcom.sap.sdn.app.iview.forumthread%3FQuickLink%3Dthread%26tstart%3D45%26threadID%3D1020700+com.sap.engine.boot.loader.ResourceMultiParentClassLoader&hl=en&ct=clnk&cd=3&gl=in&client=firefox-a
Please check that the JDK compliance level is at 5.0
Window->Preferences->Java->Compiler->Compiler compliance level set this to 5.0
Set the installed JRE to the one you have mentioned JDK 5.0 update 16
Window->Preferences->Java->Installed JRE's->
Click on the add button to select the path of your JDK.
once completed click on the check box next to it.
regards,
AKD

Logging in to remote site, reset safari does not clear the user login info?

I'm logging in to a remote site with a 2 step login. Authentication then citrix. User info is not cleared in the authentication portion when I reset safari. Must be stored somewhere else. Where should I look?

Launch the Keychain Access application and search for the server name.

Rfebbu00 not clearing the invoice

Hi All,
I am developing a program to clear the invoice specified in lockbox file if check amount matches with the invoice amount. Also if invoice company code is different from lockbox company code, I need to clear that invoice against the invoice company code. I am updating this invoice company code in table AVIP(AVIP-ABWBU). But still program rfebbu00 is not clearing that invoice for this new company code. It is posting the check on customer's account? I debugged rfebbu00, in which it's checking in table FEBCL, whether FEBCL-AGBUK(company code) is not initial. If FEBCL-AGBUK is not initial, it is used for clearing that invoice else FEBKO-BUKRS(lockbox company code) is used for clearing that invoice? So do I need to update table FEBCL also with this new company code to clear that invoice with rfebbu00??
Kindly help me on this.
Regards,
Pranjali

I have the same issue. Can you please describe how you resolved?
Regards,

TS4036 I can not clear the iCloud back up screen from my iPhone 4. It's completely frozen. Help!

I woke up this morning to the iCloud message saying it hadn't been backed up in so long, and now I can't clear the screen and my phone is frozen. I can't even turn it off. What do I do?

To resolve this problem hold the on/off button at the bottom of the Ipad at the same time hold the close down button at the top and hold for approx 10 to 20 seconds and it will close down and restart and works thereafter

DMIS 2010 SP10 replication is not clearing the logging table

Similar Messages

Maybe you are looking for