DMM 5.0 web interface doesn't work

I've upgraded a DMM from 4.1 to 5.0. This proccess was successful. When I try to access the web interface, the main page doesn't appear. The telnet to the 8080 TCP port responds correctly. It has a static IP address and a FQDN. The DNS server has an entry for the DMM.

In the Quick start guide for DMS 5.0 I read the following:
"3. Specify the fully qualified, DNS-routable hostname for the DMM appliance. Select Change, and then select OK. You can enter either the DNS-routable hostname or the IP address, for example: server.example.com"
So it is possible to work without DNS?
But when I try to acces the webinterface (http://ip:8080/ I see the login page, but when I try to login with superuser/admin I get the following message:
"The Application encountered an exception ( code : 500 ) :: edu.yale.its.tp.cas.client.CASAuthenticationException: Unabl"
Is this due to the fact that I don't work with DNS?

Similar Messages

Web Interface doesn't work after installing 11g

A couple days ago I decided to install Oracle 11g (after already having 10g Express Edition), after successfully installing 11g, I tried to access 10g EE using http://127.0.0.1:8080/apex/apex, and it doesn't work anymore. I tried using a java program with Netbeans that connects to my 10g Database and there's connection with no problems and I can upload/download data with no problems, I just can't access the web interface.
Thanks in advance.

jalvarito wrote:
A couple days ago I decided to install Oracle 11g (after already having 10g Express Edition), after successfully installing 11g, I tried to access 10g EE using http://127.0.0.1:8080/apex/apex, and it doesn't work anymore. I tried using a java program with Netbeans that connects to my 10g Database and there's connection with no problems and I can upload/download data with no problems, I just can't access the web interface.
Thanks in advance.And the error message is . . . ????

E2500 Web Interface doesn't work in bridge mode

I recently bought a Cisco E2500 for work, and after setting the router to Bridge Mode, I am unable to access the router web interface. I tried both the old IP address (192.168.1.1) and the IP address that I entered when I was configuring Bridge mode, but I couldn't get either to work. I have always tried resetting the switch to factory defaults and trying again to make sure I didn't type anything wrong, but to no avail. The wireless and everything works as it should, I just can't get back into the router to change any of my settings. Any suggestions?

OK, it's working now for me : you must put a static address on your bridge that is on the same range of your Internet network. I also update the firmware to 1.0.03 after a factory reset (just in case...).
here's my Working Config:
- Linksys WBR router (for Internet access) with LAN address 10.100.2.1 (DHCP enable from 10.100.2.100 to 10.100.2.199).
- E2500 Router in BRIDGE Mode with Static address 10.100.2.201, gateway 10.100.2.1 (My WBR router). I configured the WiFi settings and the Guest WiFi settings and everything works fine !
- My laptop are obtaining IP address from my WBR router in the range 10.100.2.x and I can access the Web Interface of the E2500 at address 10.100.2.201 if a have to change config.
Hope this help !

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP? I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

The new serial number is to the right of your chosen download.

Smart Web Printing doesn't work in IE9

Smart Web Printing doesn't work in IE9...
This question was solved.
View Solution.

IE9 has not yet been released in final form, it is still in Beta. I do not know if HP has any plans to support the Web Printing application on IE9, but if they do I would not expect them to release anything before the official IE9 release.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Just installed the newest version. the controller interface doesn't work.

Just installed the newest version. the controller interface doesn't work.
Hello, I just installed the newest version from App Store.
I did not download the drum stuff when open the app for the first time (the check box that you can un-cheack it).
I open and try to go to the Control interface but it kept saying that it cannot find the layout.
Please help.
Thank you.

Sorry to post in the wrong place.
I try to move to post but didn't have authorize.
I guess I will be posting another one in the Garageband for Mac room.

My web browsers doesn't work anymore because i accidentally deleted the certificates. help me how to retrieve it .. thanks apple :)

my web browsers doesn't work anymore because i accidentally deleted the certificates. help me how to retrieve it .. thanks apple

Apple - Support - iPod - Repair pricing - http://www.apple.com/support/ipod/service/prices/

In Safari, the link to "mail this web page" doesn't work, and the share link shows "no service". Does anyone have a solution? I have a MacBook Pro and upgraded to Yosemite yesterday

In Safari, the link to "mail this web page" doesn't work, and the share link shows "no service". Does anyone have a solution? I have a MacBook Pro and upgraded to Yosemite yesterday.

See here: If sharing options and Markup are missing after you install OS X Yosemite
This resolved the issue for me.
Rick

Cisco web voicemail doesn't work w/ Chromium -- quicktime error

My company uses web voicemail so I can listen from my phone or browser interface. For some reason, it's not picking up what it needs with Chromium. The web page loads (us-voicemail-01.company-domain.com/inbox), and I get the following errors when I click the play button:
you must have quicktime installed to play voicemails in this browser
missing localized string: quicktime.error.notininstalled
quicktime.error.notininstalled
error occurred while playing back
This is chromium 21.0.1180.89-1.
I also installed chromium-pepper-flash-stable 11.3.31.232-1 with no change in behavior.
Google-chrome doesn't work either. I also get the same error if I install openssl098, which comes up in a pacman message as being needed to use Google's build in flash support.
Firefox does work... and I'm trying to find out why. Obviously I don't have quicktime installed on my machine anywhere, so it can't actually be a quicktime issue since Firefox doesn't have it either.
Any suggestions? I tend to use Chromium, and while opening Firefox to check messages isn't a huge deal, it's obviously not preferred.
Last edited by jwhendy (2012-09-17 16:14:08)

I'm extremely sorry to confirm that I do know the story behind 'gecko-mediaplayer' and that it works quite well with Google Chrome (of course, it is listed among its plugins)...
Edit: ad rem the OP:
jwhendy wrote:Does my flash plugin version matter? Should `flashplugin` be any different than `pepper-flash-plugin-stable`?
Were I you, I'd decide whether to use libflashplayer.so or libpepflashplayer.so. I disabled the first one in Google Chrome, so I guess you may do so as well.
As for the QuickTime based voice mail, I believe that it may work if only the above mentioned plugin works. If you have Google Chrome v. 21.0.1180.89, go and check if any trailer @ iTunes is playable for you (I've just checked again and for me it is, both audio and video, just as it was yesterday).
Last edited by bohoomil (2012-09-18 01:24:39)

Link To Web Gallery doesn't work

I created a password protected web gallery in Aperture, but when it has completed uploading, the URL to the gallery doesn't work, it never loads in Safari. When I go to My Gallery home page I see the icon for the gallery with the lock as it should be but when I click on it, I get the message " that access for this gallery is restricted and to contact the owner of the gallery" instead of asking me for the password.
If a gallery is not password protected it shows up just fine. Am I missing something? Why doesn't the url for a password protected gallery work.

Just as a note, it works fine in Firefox. It seems to be an issue with Safari and .Mac.

Views dropdown on list view web part doesn't work

Thank you very much beforehand for any help with this issue, I really can't figure out what is going on.
So, I have big list (36125 items and about 25 public views there) and view selector on list view web part just stopped respond there couple of days ago. You click on down arrow and nothing happens... There are no any java script errors in browser console,
there are no any errors in ULS log. Profiler shows that request even is not sent to server when you click it to get list of views.
At the same time, this web-part works correctly with other lists on this site.
Do you have any ideas?

Hi,
I understand that the view drop down doesn’t work for a specific list. Can you browse these publish views by manually change the view name in the URL? There are two view drop downs in the ribbon(one under the List tab and one under the browser tab). Are
they all not working?
It is a big list, you need to make sure that there are no more than 5000 items in a single view. Only 8 lookups can be added to a view at the same time. You need to make sure that these thresholds.
For more information about these thresholds, please refer to this site:
Manage lists and libraries with many items:
http://office.microsoft.com/en-us/sharepoint-foundation-help/manage-lists-and-libraries-with-many-items-HA010377496.aspx
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Web Gallery - Upload from web page doesn't work

I've created a web gallery with upload permissions set, no name or password, and none of my friends or relatives can get anything to successfully upload.
I'm using iPhoto 8 version 7.0.2 (341) to build my web gallery, but uploading for others just doesn't work. They get the dialog to enter their name and email, they can choose images, they get the progress window, then nothing. I've deleted the gallery and rebuilt it, I've renamed it, I've looked in my _gallery folders on iDisk, and so no, ad nauseum, ad infinitum.
Anybody know what's up with the Gallery?

I've not used the upload but some have reported that it does not work BUT that uploading via e-mail does work -- give the e-mail route a try as a work around and report the problem to Apple -- iPhoto menu ==> Provide iPhoto Feedback
Larry Nebel

(unbelievable) gmail tasks (web app) doesn't work on 10.2.429 browser

Google provides Tasks as web app
http://mail.google.com/mail/help/tasks/
here https://support.google.com/calendar/answer/128061?p=tasks&rd=1 they say to test if your device is xhtml compatible
to test if it is, they suggets to visit this link from the mobile device
Minimum requirements
These are the minimum requirements to access Tasks for mobile web browsers:
Your browser needs to be XHTML compliant. To determine whether your browser is compatible, visit http://www.google.com/xhtml and perform a search. If it doesn't work, your browser may not be XHTML compliant.
OS 10.2 allows to browse http://www.google.com/xhtml and also to perform searches, but next it fails to parse/load the tasks page
try it yourself http://gmail.com/tasks
is it google not-compliant or is it the BlackBerry OS 10.2 browser?
Thank you
Cor

Try to open the right-click context menu of the Back button and see if you can go back further.
The current active entry in that list has a bullet in front of it.
If you hover an entry in that session history list then it shows the direction by adding an arrow at the left.
You can left click an item to open it in the current tab or middle-click or Ctrl left-click an entry in that list to open that link in new tab, just like you can with other links.

QT Pro Export for Web--poster doesn't work in Firefox or IE, only Safari

Hi QuickTime gurus (within Apple and in the 'real world
I had thought that when you Export for Web in QuickTime Player Pro, the 'poster' movie would display in all browsers, on Mac and Windows.
Unfortunately, the poster does NOT work in Firefox (neither Mac nor Windows) nor in IE. It only works in Safari.
See this example - http://www.wellesley.edu/~kenny/a.html
Am I doing something wrong, or is there something wrong with the JavaScript such that it doesn't work in all browsers, or....?
Thanks...k

Ok here try this:
http://setfreedenver.org/a/readme.html
And here's the zip file for the above.
http://setfreedenver.org/a.zip
You should have four files in the folder that makes everything for the video in the html:
video.m4v This is the actual video that plays.
video.mov This is the referance video that points to video.m4v
poster.jpg This is the poster frame.
html.html This is the html for the above video to play in.
Move one of the above to somewhere else and it will break the video playing in the html.
Sidebar:
I couldn't get this to work on my server. I had to go to my server control panel (somewhere out there in Texas) and make a MIME Type setting for the .m4v, so the video could play. Not all servers are setup to play different kinds of videos, documents or images. So, if you ever run across something that plays locally on your computer and not on your sever and your at your wits end.. Contact you server administrator and have them check the MINE setting on the server.
Message was edited by: David M Brewer

Transmission torrent web interface pc not working

This never bothered me before as I have quickly found a work around for this but I have always wondered why this doesnt work for me.
I cant seem to get the torrent app to fully load. it just seems to not load all the way.
So I only see this,
and it never advances from there.
Like I said I found workarounds were i can see torrent downloads from web apps like: Android, Xbox 360, and Xbox one. But none of my PCs can display it properly.
Any help From somome that has figured this out to display properly would be appriciated.
Nas info:
EZ Media and Backup Center 2TB
Version:4.1.104.31360
Transmission Torrent: 4.0.30086

Hi Wicked.. well.. the answer i'm about to give you, you will not like because i didn't like it either and has similar issues that you were having.
I have a the ix4-300D and had transmission working just fine on my NAS and then did an update to the firmware in early 2014 that basically broke transmission. Mine didn't even start or load any web interface. I tried everything including: reseting of web configuration of Nas (holding reset button), uninstalling and installing of transmission app (mine wouldn't even reinstall) and finally even backuped all data to external storage and full wipe of drives and nas config but sitll no go...
I was then forced to call Lenovo (i am still under support/warranty). They then sent me a link to a previous firmware version and a usb disk imaging image/tool that i then basically restored the default image and then upgraded to the latest firmwares and since then have not had any issues.
Twonky settings now save when changed in the web interface too! however migrating 10+ TB of data to 5-6 external hdds IS NOT FUN!
hope that helps buddy!

DMM 5.0 web interface doesn't work

Similar Messages

Maybe you are looking for