DMM 5.1 - 404 HTTP Error
Hi,
I am trying to connect to DMM5.1 admin page for the first time and yet getting a 404 error. I am sure I can ping the hostname of the DMM and it matches the same one configure on DMM applicance. I am using the URL http://<DMM Hostname>:8080 and no luck. I am getting the following error:
Any ideas?
HTTP Status 404 - /dmsadmin/main.jsp
type Status report
message /dmsadmin/main.jsp
description The requested resource (/dmsadmin/main.jsp) is not available.
Thanks
Glad to see someone else is having this issue. I've used VMs of the demo 5.1 without a problem, and on several different machines. Now I'm trying to set up a server from scratch and get the same issue as the previous post.
I know my DNS is working, I can ping the hostname of the server fine, and I can access another DMM that is running as a VM fine, but not this machine. I have restarted everything and flushed DNS on the computer I am trying to use to http to the DMM (when I had the same IP address for one physical and one virtual DMM, and tried to disconnect one and switch between the two).
I have reloaded a new ISO, one I downloaded and one was downloaded by a coworker, and both do exactly the same thing. My next step will be to try to download and run the 5.2 ISO. If that doesn't work, I don't know what to do.
Similar Messages
-
I cannot fix a 404 HTTP error help please
hello i am trying to access a web address and i try using safari or firefox, and i always encounter this error :
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)
Technical Information (for support personnel)
Go to Microsoft Product Support Services and perform a title search for the words HTTP and 404.
Open IIS Help, which is accessible in IIS Manager (inetmgr), and search for topics titled Web Site Setup, Common Administrative Tasks, and About Custom Error Messages.
the web address i am trying to go to is www.shoemetro.com i only have this kind of error when i tyoe this address otherwise i don't have any problem using other addresses that is kind of weird !!!
if you can help me i would appreciate.
thanksA 404 error is a server error and can only be 'cured' by the mainatiner of that server not by you.
http://en.wikipedia.org/wiki/Link_rot
Stefan -
Hi all,
I'm having a perplexing issue with iCal server. Every now and again, iCal reports that it encountered an HTTP 404 error with my iCal account on one of my Lion servers. I can't seem to figure it out. Anyone else having this issue? Any suggestions?
ChrisDo you ever get 404 errors accessing server.example.com/webcal ?
If you are using SSL check that your SSL sertificat is correctly set for iCal. In Server app go to Hardware => Server => Settings => SSL Certificate.
You can try enabling the webcal manually by doing this:
iCal with SSL:
sudo webappctl start com.apple.webapp.webcalssl
iCal without SSL:
sudo webappctl start com.apple.webapp.webcal
This rebuilds you apache httpd.conf and restarts apache which suppressing often solves problems in Lion Server. Alternatively you might try to disable all services, change your servers hostname (just go through the process but change the hostname to what the hostname already is) and then re-enable all your services. -
JSP Portlet Returns 404 HTTP Error
Hello,
I have a portlet provider that is a simple JSP page that passes a select query string to a table in the database, straight forward. In JDeveloper the JSP and related Classes work fine. As a portlet the provider is registered and the JSP page where the query is entered all function fine, but when a query string is entered and the submit button is pressed the result is a blank page or 404 error. Any thoughts?
Thanks,
Jeffi would guess the action parameter in your form is the problem.
in a standard JSP, called "myPage.jsp", if you want to page to post to itself,
you simply use <form action="mypage.jsp" method="post">
however, a portlet is simply a content region on a PL/SQL page.
your JSP needs to use the Java Portlet APIs to determine what page it's on,
and then post to that page, listening for params on the refresh.
in other words, the JSP does not exist as a unique entity,
and therefore would be expected to generate a 404 on request.
see the Parameter Passing Java Portlet sample for details.
good luck,
rich -
this is the complete error I get. I just installed firefox so that I can use this feature and now it is useless.
Error Summary
HTTP Error 404.3 - Not Found
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
Detailed Error Information
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032
Requested URL http://www.refworks.com:80/refgrabit/install.xpi
Physical Path E:\RefGrabIt\install.xpi
Logon Method Anonymous
Logon User Anonymous
Failed Request Tracing Log Directory C:\inetpub\logs\FailedReqLogFiles
Most likely causes:
It is possible that a handler mapping is missing. By default, the static file handler processes all content.
The feature you are trying to use may not be installed.
The appropriate MIME map is not enabled for the Web site or application. (Warning: Do not create a MIME map for content that users should not download, such as .ASPX pages or .config files.)
If ASP.NET is not installed.
Things you can try:
In system.webServer/handlers:
Ensure that the expected handler for the current page is mapped.
Pay extra attention to preconditions (for example, runtimeVersion, pipelineMode, bitness) and compare them to the settings for your application pool.
Pay extra attention to typographical errors in the expected handler line.
Please verify that the feature you are trying to use is installed.
Verify that the MIME map is enabled or add the MIME map for the Web site using the command-line tool appcmd.exe.
To set a MIME type, use the following syntax: %SystemRoot%\windows\system32\inetsrv\appcmd set config /section:staticContent /+[fileExtension='string',mimeType='string']
The variable fileExtension string is the file name extension and the variable mimeType string is the file type description.
For example, to add a MIME map for a file which has the extension ".xyz": appcmd set config /section:staticContent /+[fileExtension='.xyz',mimeType='text/plain']
Warning: Ensure that this MIME mapping is needed for your Web server before adding it to the list. Configuration files such as .CONFIG or dynamic scripting pages such as .ASP or .ASPX, should not be downloaded directly and should always be processed through a handler. Other files such as database files or those used to store configuration, like .XML or .MDF, are sometimes used to store configuration information. Determine if clients can download these file types before enabling them.
Install ASP.NET.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
Links and More Information This error occurs when the file extension of the requested URL is for a MIME type that is not configured on the server. You can add a MIME type for the file extension for files that are not dynamic scripting pages, database, or configuration files. Process those file types using a handler. You should not allows direct downloads of dynamic scripting pages, database or configuration files.
View more information »That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.
-
HTTP Error 404 :File does not exist
Hi all,
On Test instance we are not able to open the help file,it give an error
HTTP Error 404 :File does not exist
can anybody have solution for this
it's very urgent
Thanks
shekharI have changed the note server definition in the external app to add the mail directory in front of the mail file name 'mail/mufile.nfs' and I get the following error:
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: LotusServiceSession: getConfigProperties(): An error occured
while reading/ retrieving the properties from the the configuration file.
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: Unhandled exception in SOAP call
oracle.portal.provider.v2.ProviderException: LotusServiceSession: getConfigProperties(): An error occured while reading/ retrieving the
properties from the the configuration file. -
How to consume web service in WDP ABAP ---HTTP error (return code 404, mess
Hi,
Am trying to consume a web serivce in WDP where I got error HTTP error (return code 404, message "conn failed")in sdn i came to know that it could be resloved by giving the IP address of the host but in case it is not the web services am using are the external links.
kindly help me to sort it.
Regards
Rajhi,
in addition to above thread
refer this too
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0d4aa08-beed-2a10-fab2-ad975cead04a
bvr -
Error in Webservice Call HTTP error (return code 404, message conn failed)
Hi
We wish to call a standard EP7 webservice through ABAP.
When we try to create consumer proxy , we get the following error.
HTTP error (return code 404, message "conn failed")
Message no. SPRX090
==> Display Error Document
If you want to generate a proxy for an external WSDL document by specifying a URL, check that the proxy settings of the system are correct (transaction SICF - Client - Proxy Settings). If you want to generate a proxy for an XI Repository object, check the connection to the Enterprise Services Builder as follows:
Check List for Setting Up a Connection to the Service Repository
1. The address of the Enterprise Services Repository must be known in the SAP system
Check with report SPROX_CHECK_IFR_ADDRESS
The address is taken from the following parameters in the exchange profile ('Connections' section):
com.sap.aii.connect.repository.name: Server (for example,pwdf0436)
com.sap.aii.connect.repository.httpport: Port (for example, 1080)
com.sap.aii.connect.repository.contextroot: Root (for example,rep)
The logon data is also read from the exchange profile ('ApplicationSystem' section):
com.sap.aii.applicationsystem.serviceuser.name: User
com.sap.aii.applicationsystem.serviceuser.pwd: Password
As an alternative to using the exchange profile, you can maintain the RFC destination SAP_PROXY_ESR. If this RFC destination is maintained it will be used by the proxy generation in place of data from the exchange profile to access the Service Repository. In this case, the Exchange Profile will even not be read.
The RFC destination has to be set up using transaction SM59 and should look like this:
RFC Destination: SAP_PROXY_ESR
Connection Type: G (HTTP Connection to External Serv)
Description1: ESR for Proxy Generation
Target Host: esr_host
Service No: 1080
Path Prefix: rep
Logon and Security:
Basic Authentication: active
User: esr_user
Password: esr_password
2. The HTTP Framework of the Web Application Server must function
Check with report SPROX_CHECK_HTTP_COMMUNICATION
If necessary, contact your system administrator. Please be aware of the fact, that the HTTP framework is depending on the application server. Thus the result of the report may differ for different application servers.
3. Proxy generation must interpret the data of the Enterprise Services Repository correctly
Check with report SPROX_CHECK_IFR_RESPONSE
you can also login in dev and go to Xn se91
enter msg id SPRX and msg no 090
select the message and click on long text..
you get the same message in a formatted manner..
How to get rid of this ?
Regards
RajendraHi
we have given the correct path as we have tested the webserive from
other technology (.net) by providing the same path.
regards
Rajendra -
LSO Content Player Error - HTTP Error 404 - File or directory not found
Hi All
Please could you assist.
I have published a course to my ISS CMS and configured the links in both ECC and J2EE lsm/mediator.
Result
Username='username', SystemName='HRD', Client='030', Host='22.22.22.22', Language='EN', SystemNumber='00', EnablePoolSharing='true', MaxConnection=50, AbapDebug=false:
CPCFG.RSURL = http://iiscmshost.domain/LSO600/Content/
CPCFG.REPUS = username
ServerURL=http://iiscmshost.domain/LSO600/Content/ ok!
I was able to successfully publish the course from the Authoring Environment to the CMS server.
When selecting the starting the course from the portal with content player i get the following error.
HTTP Error 404 - File or directory not found
But the URL is referring to - http://iiscmshost.domain/lms/mediator/courseview?sid=8685627505550088697845288091101&language=EN&sys=HRD&client=030&sap-accessibility=X
How does directory http://iiscmshost.domain/lms/mediator get created when the content is in http://iiscmshost.domain/LSO600/Content ??
Secondly can I change this reference to my LSO600/Content directory.
Please advise with any information. Point will be awarded.
Regards
MaahirDear Maahir,
We are facing the same problem. We are pointing over CMS to IIS, instead of KM content of portal. We are successfully able to release and publish the course, then attach to a course participant also.
But. When participants logs into the portal and click on Start Now. It giving 404 file not found Error. Its the same error. All our Course and content pointed to CMS IIS Server Url.
When we did the content player config test, result is NOT OK. We have required R3 authorization and CMS user authorization also with admin rights. Content Player console is working in AE when we start up the course. Its showing the error.
So, it seems like content player is not working properly. Bcoz we are launching course from http://WEBDAV repository server maintained in back end system. Which is the IIS(CMS Server)for us. Do we need to maintain anything separately to launch a course from IIS Server on R3 and SAP Portal. Below sample URL from page.
http://Sever:port/lms/mediator/courseview = xxxxxxxxxxxxxxx
Could you please us know, how did you resolve the issue and tell me the cause of this issue.
Thanks and Regards
Obli -
THE PAGE CANNOT BE FOUND - HTTP ERROR 404
I have just installed i-WEB 08 and have tried to publish a web page. I have saved, as prescribed and, to my knowledge, there are no passwords associated with the web page. When I try to access the page using SAFARI v3.0.4 the following error message appears:
"The page cannot be found. The page you are looking for might have been removed, had its name changed, or is temporarily unavailable. Please try the following: Make sure that the Web site address displayed in the address bar of your browser is spelled and formatted correctly. If you reached this page by clicking a link, contact the Web site administrator to alert them that the link is incorrectly formatted. Click the Back button to try another link.
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)"
I have checked address is as supplied and tried adding my user name to the www address without luck. Friends have also had same error message.
Can anyone supply an answer, please.Did you publish to .Mac or another host?
Were there any warnings or errors during publishing?
What is the URL of the page you get the error on?
By the way, this is the "+Previous to+ iWeb '08" forum; the iWeb '08 Forum is here:
http://discussions.apple.com/forum.jspa?forumID=1193 -
Content Server error on LINUX (HTTP error: 404 Not Found)
Hi All,
While checking the status of content sever by using the T-code CSADMIN I am getting the following error message.
<b>***********************************************************
Error : - HTTP error: 404 Not Found
Message no. CMS025
Diagnosis
Error in accessing via HTTP
404 Not Found
*************************************************************</b>
I have done the installation of Content server 640 on Red Hat Linux / MaxDB.
Moreover I am using the following connection data in CSADMIN.
HTTP server :- 80.0.0.205
Port Number:- 1090
HTTP Script :- ContentServer/ContentServer.dll
Version no. :- 0046
Please help me.
Thanks ,
HarshalHi Dagmar,
The HTTP services are working fine. But i m not able to reach the content server url can u help on this?
Please find the http trace file
ERROR => PlugInHandleServData: HttpParseRequestHeader failed (rc=701) [http_plg.c 3258]
ERROR => IcmHandleNetWrite(id=3/4782): HandleServData failed (rc=701) [icxxthrio.c 1833]
The error i am getting in Content server url is
Server Error
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable. -
Content managemtn http error 404 not found
'http://<host name>:<port no.>/ContentServer/ContentServer.dll?serverInfo'
status is running but when I m a trying to configure
in OAC0, with these fields fill.
Document Area: Document Management System
Storage type: HTTP Content server
Version no: 0046
HTTP server: IP address for content server host
HTTP Script: ContentServer/ContentServer.dll
I am getting an error
http: 404 not foundHI stiaan,
Thank you for the quick response.
When I execute transaction csadmin. its firs asking me the details of the content server like in two fields.
Repositry, server .
I have given all the correct details n I am getting new error.
1. This error is comming when I have check the SECURE CONNECTION box.
connection to partner 'localhost:0' broken / CPIC-
CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program
connection ended (read err
2.If I uncheck the secure connection box I m getting same error.
http error 404 not found.
3. do we need to define any rfc connections in sm59 to content server..??
again thx.
Edited by: letzfriend on Jan 26, 2012 8:59 AM -
Im working on a PKGBUILD for pcw-hg using the example PKGBUILD-hg.proto as a guide
I can do..
hg clone https://bitbucket.org/emg/pcw
..and everything works fine, but with makepkg and the PKGBUILD im creating I get "abort: HTTP Error 404: NOT FOUND"
Heres what Ive got..
# Maintainer: tjwoosta <[email protected]>
pkgname='pcw-hg'
pkgver=146
pkgrel=1
pkgdesc="pcw uses inotify to monitor a directory tree (created by ii) and \
open terminals running cw with the in and out files for each channel."
arch=('i686' 'x86_64')
url="http://www.deepcube.net/code/pcw/"
license=('MIT')
depends=('ii-emg-hg' 'srw-hg')
makedepends=('mercurial')
provides=('pcw')
conflicts=('pcw')
_hgroot="https://bitbucket.org/emg/"
_hgrepo="pcw"
build() {
cd "$srcdir"
msg "Connecting to Mercurial server...."
if [ -d $_hgrepo ] ; then
cd $_hgrepo
hg pull -u
msg "The local files are updated."
else
hg clone $_hgroot $_hgrepo
fi
msg "Mercurial checkout done or server timeout"
msg "Starting make..."
rm -rf "$srcdir/$_hgrepo-build"
cp -r "$srcdir/$_hgrepo" "$srcdir/$_hgrepo-build"
cd "$srcdir/$_hgrepo-build"
make
package() {
cd "$srcdir/$_hgrepo-build"
make PREFIX="/usr" DESTDIR="$pkgdir/" install
install -D -m644 LICENSE \
"$pkgdir/usr/share/licenses/$pkgname/license.txt"
install -D -m755 extras/cw_color.sh \
"$pkgdir/usr/bin/cw_color.sh"
install -D -m755 extras/chat.sh \
"$pkgdir/usr/bin/chat.sh"
install -D -m755 extras/pcw_notify.sh \
"$pkgdir/usr/bin/pcw_notify.sh"
Any idea what Im doing wrong?
Last edited by tjwoosta (2011-03-02 03:17:01)jasonwryan wrote:
You could try removing the trailing slash on hg_root and just have:
_hgroot="https://bitbucket.org/emg"
lol, I cant believe I didnt think or that, I tried all kinds of crazy stuff. Works though thank you -
HTTP Error 404: Page not found on my 8520?????
hi hope you can help me i use my phone loads for facebook and get notifications sent to my phone but when i click on one and i wnt to go into a group via the noticication on my phone i get HTTP Error 404 Page not found can anyone please help me its been like this for a couple of weeks now thank you x
Hi Nehal
We have found the issue . We were using wrong http script .
But we faced another HTTP error :
http error 401 unauthorized 5024 breach of security
when I want to store business document via GOS in VF03 -
AdControl error: HTTP error status code: NotFound (404)
For over a week now, a Silverlight WP 8 app with an AdControl configured for "test_client" continues to report this error and thus no bing ad visible either while running from an emulator (8.1 512) or from a WP 8 device. If I change the AdUnit
to use a PubCenter ID it works fine on the device and ads are displayed. The emulator connects to the Internet just fine via IE.
Could the ad server not be responding to the "test_client"?
Could someone let me know if it has worked recently for them? I tried contacting MS and no one seems to have an app configured with the test ad... I could give MS so many helpful suggestions. But looking at the hundreds of un-answered posts here - I
suppose they're busy with Windows 10...and have they asked developers if they're willing to put up everything on the cloud? all the while people still waiting to see the 'start' button on Windows 9?
here's the trace
Ad Err: NetworkConnectionFailure,Microsoft.Advertising.Shared.AdException: HTTP error status code: NotFound (404) ---> System.Net.WebException: The remote server returned an error: NotFound. ---> System.Net.WebException: The remote server returned
an error: NotFound.
at System.Net.Browser.ClientHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
at System.Net.Browser.ClientHttpWebRequest.<>c__DisplayClasse.<EndGetResponse>b__d(Object sendState)
at System.Net.Browser.AsyncHelper.<>c__DisplayClass1.<BeginOnUI>b__0(Object sendState)
--- End of inner exception stack trace ---
at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
at System.Net.Browser.ClientHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at Microsoft.Advertising.Shared.HttpRequest.EndGetResponse(IAsyncResult asyncResult)
at Microsoft.Advertising.Shared.WebRequestWrapper.WebRespCallback(IAsyncResult result)
--- End of inner exception stack trace ---
I do love Windows - don't get me wrong - I'll check my 2nd dev system soon.Hi Ravi,
Reward points if this helps
The J2EE server might be overburdened and cannot accept the call. The 'Receive'servlet is not called. You will find further details on the HTTP status code definitions under "http://www.w3.org". Check the accessibility of the server by calling: http://<hostname>:<port>/MessagingSystem/receive/AFW/XI.
The Listener Beans of the affected connection (AFW, Marketplace, BC,see above) were not registered or the log-specific Event Handler was not found.
Check out this trouble shooting guide for SAP XI...Section 7.4.4.4 talks about exactly the same problem:-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Reward points if this helps
Regards
Pragathi.
Maybe you are looking for
-
Self Assigned IP Address redux
I am getting the "Self Assigned IP Address" in my Airport connection and I can't troubleshoot the problem. Here's my setup and what I have been looking to accomplish.. I have an iMac G5 with a built-in Airport Extreme card running Leopard 10.5.3. I h
-
Gigafast Wireless adapter question
I have an Imac 17 inch 1.25 ghz. I bought a Gigfast usb adapter to go wireless. I installed the driver, and followed the guide instructions. When I go to Network it shows the adapterand the IP and Sub addresses but no router address. It does not give
-
Hi! Is there a way to use the headphones and speakers at the same time without disconnect anyone, im using sb li've 5.. tks
-
I have install oracle9i on AIX5L can anybody show me where I can download oracle9i developer suite for AIX5L
-
Image Still Cropped When Viewed Full Screen
Hi everyone. I am trying to figue out if there is any way in iBooks Author to have an image cropped(masked) in layout view, but then enable it to show the full unmasked and uncropeed image when tapped to be viewed full screen on the iPad. I have a c