DMP 5.1 = 5.2 Upgrade Issue? "An error has occurred..."

I upgraded from 5.1 to 5.2, and the VP and DMP upgrades went fine (other than the one 4305 I managed to "brick" in the process). But
on the DMM upgrade, not so much. All seemed to work well, except when trying to access the DMM admin post-install I get the following error message: ("An error has occurred. Click on the button below to try again. If this does not work, please contact your system administrator.)
I suspected a DNS misconfiguration issue on the initial upgrade, but after verifying forward and reverse DNS FQDN's everywhere, I did a clean 5.1 build and upgrade to 5.2, and still the same issue.
Everything else seems to work fine. AAI is accessible and it sync's with SaS, and there are not other visible errors reporting anywhere else along the way, but I can't seem to get past this (Tomcat?) error.
Ideas?
Thanks...
Mike

This is a known issue that is being addressed.
Description
Certificate disappears after upgrade from 5.1 to 5.2
Solution
Regenerate Certificate by changing Hostname (can be the same hostname, just select “OK” w/o changing the name).
SnS First, then DMM
Reboot Server
This is from the AAI interface...
Let me know if this works..
T.

Similar Messages

EAX Console issues: An error has occur

Hi there. My name is Emil, 2 years old, and from Gothenburg, Sweden.
I have a SoundBlaster Audigy 2ZS and EAX console , 5. i think. I've searched the board and read the FAQ without any help at all, so i made a new thread.
Yesterday, my EAX Console flipped out, or as a matter of fact, my whole Creative MediaSourcePlayer and all of it's function flipped out. Whenever i try to launch the following program, it says an error has occurred:
Surroundmixer (Surmixer)
EAX Console
AudioHQ
Creative MediaSource Player
THX Setup Console
Speaker Settings
Diagnostics
Graphic Equalizer
I've tried the following things:
) Reboot
2) Installing CMS_PCAPP_LB_3_30_2.exe as stated in the help.
I don't know anything about Hardware, so for me to switch PCIslots and stuff like that is impossible. I have no issues about regedit or stuff like that, but I just can't handle anything concluding the hardware.
Thanks in advance, and regards // Emil Svensson, Sweden.

IIrc, this issue has already been here (though looooong ago) and the cure were to reinstall some dll(s), but I can't remember which ones.
If not already tried this, try w/ reinstalling the whole software bundle from original CD (no drivers, but software only). You can start the installer from CD by running the start.exe which can be found on folder CTRun\.
Hoppas det ?r en l?sning.
jutapa

10.3 OS Upgrade error. An error has occurred while downloading software for your device. Please verify your internet connection or try again later

HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.

I suggest you try the very clean and very forceful AutoLoader method:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

An error has occurred after upgrading from MBAM 1.0 to 2.0

The upgrade went fine, uninstalled MBAM v1.0 from SQL and IIS servers, rebooted servers and re-installed with MBAM v2.0. However, now when I go to the webportal every page shows the "An error has occurred" message.
I've checked the webconfig files under the Help Desk Website folder and it's got our server path in it. the webportal was working before the upgrade.

Good to hear it was a simple fix. I'm about to upgrade our production environment tomorrow night. Going from MBAM 1.0 to 2.0 SP1. Not sure where you upgraded from, but did you run into any issues. I've been looking and haven't seen anyone encounter any
real issues. We are not doing the SCCM integration btw.

I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred". It was happening before and after the last OS upgrade. I've done a hard reboot with no effect. Any suggestions???

I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred". It was happening before and after the last OS upgrade. I've done a hard reboot with no effect. Any suggestions???

Have either of you had any luck with this issue. It began happening to me today when I was trying to purchase music on iTunes. I have purchased music and games in the past and have had no problem. Any help would be appreciated.

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Are you behind a firewall or double NAT??
What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
It is plugged in of course isn't it.. no nasty join wireless anywhere??
The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens.

TS3694 I am getting "An unknown error has occurred (3014)" on my iPad2 while trying to upgrade to iOS6. What do I need to do to fix this?

I am getting "An unknown error has occurred (3014)" on my iPad2 while trying to upgrade to iOS6. What do I need to do to fix this?

Hi apiccolo5,
Thanks for visiting Apple Support Communities.
See these articles for steps that can help you resolve the issue you're seeing:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Best,
Jeremy

Error An unexpected error has occurred. Troubleshoot issues with Microsoft SharePoint Foundation. Correlation ID: 65ef1cb8-1cbf-40ee-b79b-05db15ca6dbb

Hi,
Since I installed a few updates, that I can't access the sharepoint the same way. I always get errors when trying to access the majority of the pages.
I already removed the update suggested on other threads (KB2844286), but everything remains the same.
I always receive errors like this one:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 65ef1cb8-1cbf-40ee-b79b-05db15ca6dbb
what can I do? The Sharepoint 2010 is located on a virtual partition of our server, running Windows Server 2008 Standard edition SP1.
When I try to access administration tools it happens the same error, and I don't know what I can do more.
Please help me.
best regards,
Jorge Guimarães

I followed some tips, to trace the error, allowing some trace debug, and got this:
Server Error in '/' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties() +134
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs() +44
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext) +329
Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalAvailable() +44
Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls() +60
Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() +15
Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) +91
System.Web.UI.Control.LoadRecursive() +65
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2427
Version Information: Microsoft .NET Framework Version:2.0.50727.5477; ASP.NET Version:2.0.50727.5479

I cant open Photos om my mac. Just upgraded to Yosemite. The message I get is: An unexpected error has occurred. Please quit and restart the application. I have done this several times but nothing seems to work. iPhoto is gone. What do I do?

I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?

I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?

TS1424 I am having issues downloading music from iTunes, it comes up saying an unknown error has occurred - please check your network connection. Now I can connect to iTunes store and have itunes as an exception for downloads so don't know what else to do

Hello, I've started having an issue downloading songs and apps from iTunes to our PC which has Windows XP Professional installed. We also use Karspersky Anti-Virus and Firefox as an internet browser. Have never had this issue before, it comes up with "An unknow error has occured and downloads are stopped with an error 8003. Also says please check your network connection" We have no issue connecting to iTunes store or the network so not sure how to fix this. It is very frustrating. Have checked Windows Firewall and iTunes is an exception, can't think of anything else why it won't work.

I sounds as though you need to start again. The following article tells you how to completely remove iTunes and Quicktime. If you didn't actually install iTunes you wont find it in add/remove programs so you can't do that bit, but still delete the iTunes folder in Program Files as advised in the article.
http://docs.info.apple.com/article.html?artnum=93698
Once you have got rid of them, try installing the latest version of iTunes. There is a link to it in the article.
Itunes wont move your music for you, get iTune sgoing then ask again.

HOW TO: Resolve 'An error has occurred: Request timed out' issue

Post Author: fmi-charles
CA Forum: Crystal Reports
After doing a new install of BOE Server software, encountered a problem viewing long running reports on-demand. InfoView displayed: 'An error has occurred: Request timed out.' Couldn't find answers anywhere (not even on this site) that would help me resolve this issue. So, I decided to post the resolution.
The error from this post's subject line is displayed when viewing on-demand reports that run for longer than 90 seconds. If the report was scheduled, it wouldn't have a problem - only viewing on-demand. This issue transpires with the following setup: * M$ Windows 2003 Server * IIS v.6 * .NET 2.0.50727 * BO Enterprise Server XI R2 SP2 * M$ SQL Server 2005
The resolution is to find the 'machine.config' file for your current version of the .NET Framework (e.g. C:\WINDOWS\Microsoft.NET\Framework \v2.0.50727\CONFIG\machine.config). Edit the file and place the following into a new line within the 'system.web' section: <httpRuntime executionTimeout="3600"/>
The timeout is set in seconds.
Then, restart IIS using the command line.

Hello Cristinel -
Thanks for send your inputs but I have solved this error.
I would like that if you solve my this question.
My project's URL is http://www.lampslightingandmore.com/
I want to put w3stander HTML logo in my website.
I have done many error but some error i could not understand.
please click on below url and send me your suggestion how to solve this errors?
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.lampslightingandmore.com%2F
I hope you send your best inputs.
Thanks

Surface Pro 3 - MBAM/BitLocker/TPM: "An Error Has Occurred" Issue

We are trying to implement full disk encryption using MBAM Server/Client and BitLocker. We have been successful on standard Windows 7 Ent and Windows 8.1 Ent laptops and the MBAM Console reports encrypted/compliant.
The Surface Pro 3 running Windows 8.1 Ent however has been a pain in the you-know-what! It just will not work like our laptops. The Event Viewer error we get is as follows:
"An error occurred while applying MBAM policies.
Volume ID:\\?\Volume{dfd94fd0-206c-45d1-a19a-6a39019ada1e}\
Error code:
0x80310018
Details:
You must initialize the Trusted Platform Module (TPM) before you can use BitLocker Drive Encryption."
For reference, here is our workflow:
1. Enable TPM in UEFI.
2. Install .NET 3.5 since this is apparently a Windows 8.1 requirement for MBAM. Reboot. Install related updates from Microsoft Update. Reboot.
3. Verify relevant MBAM & BitLocker GPOs are applied by running "gpupdate /force" in an elevated command prompt. Reboot.
4. Run the following elevated PowerShell commands and then reboot:
$tpm=get-wmiobject -class Win32_Tpm -namespace root\cimv2\security\microsofttpm
$tpm.DisableAutoProvisioning()
$tpm.SetPhysicalPresenceRequest(22)
5. Install MBAM Client 2.5 and KB2975636 hotfix.
6. Run MBAMClientUI.exe and set PIN. On our laptops, encryption begins, but on the Surface Pro 3 we get a generic "An error has occurred". Event Viewer shows the above error.
Can anyone help?? There has got to be others that have used MBAM on the Surface Pro 3.

More testing today and I *think* I may have found my issue.
I failed to mention that on step 5 above, I have been rebooting after installing the MBAM Client and hotfix. It appears that this extra reboot breaks the process and does not allow the MBAM Client to initialize the TPM when running MBAMClientUI.exe. If I do
not reboot, then everything seems to work great.

I want to upgrade my backup storage space to 10GB but can't. Seems every time I try to "BUY" it never goes anywhere but I notice it is asking An unknown error has occurred. How can I use my re

I want to upgrade my backup storage space to 10GB but can't.
Seems every time I try to "BUY" it never goes anywhere but I notice it is asking me for an unknown error has occurred.
How can I use my regular Apple ID to purchase the upgrade and backup storage space?
Thanks in advance.
Mohd

[email protected] wrote:
I'm reluctant to post apple ID's in a public support forum, and would prefer to deal with this by private email. or phone.
Then contact Apple directly.
This is a user to user technical support forum. No one here has access to manage Apple ID's other than their own.
There is no Apple presence here.

Cannot upgrade from Mountain Lion 10.8.5 to Yosemite , reaches 1.34 GB then 'Error has occurred'

Hi All
Sorry not technically minded at all.
Trying to upgrade my iMac which is running Software OS X 10.8.5 (12F2518) to Yosemite, reaches 1.34 of 5.64 GB and states an error has occurred.
I've attempted this on numerous occasions and always with the same outcome.
many thanks in advance.
Jon

Try downloading it in the Safe Mode.
Safe Mode - About
Safe Mode - Yosemite

I tried to update my OS (Mountain lion) to mavericks, but i can't seem to download. There's a 'an error has occurred' in red beside the free upgrade bar.. what should i do?

I tried to update my OS (Mountain lion) to mavericks, but i can't seem to download. There's a 'an error has occurred' in red beside the free upgrade bar.. what should i do?

It's possible something has become corrupted in your AppStore cache folder. I had the same problem that occurred after I did a partial download, paused it, and attempted to restart it again later. Here's how I fixed my problem:
Enable AppStore Debug menu:
1. Quit AppStore completely.
2. Run Terminal and enter the following on the command line: defaults write com.apple.appstore ShowDebugMenu -bool true
3. Restart the AppStore. You should see a new menu called "Debug".
Clear the download cache:
4. In AppStore, select Debug menu / Show Download Folder
5. Quit AppStore completely, but leave download folder open
6. In the download folder, select all files/folders, then delete them.
7. Restart AppStore. You may need to sign in to your Apple account again.
You may need to restart your computer to be able to delete the files from the trash.
You can then try the download again.

DMP 5.1 = 5.2 Upgrade Issue? "An error has occurred..."

Similar Messages

Maybe you are looking for