DMP created in HANA when previewing crystal layout

Hi All
I have created a production order layout to be used in SAP HANA.
The layout works fine in crystal, as soon as you preview the layout in sap..a dmp file gets created.
another little error pops up.."virtual pure call" and sap shuts down.
they are Version 9.0(9.02.001) PL09 HOTFIX 1
This is the connection string. I am not sure if that is causing the issue:
Thank you all
Jerusha

Hi,
Please check SAP note:
1925899 - CR_Use different database drivers or servers to design
multi-database reports
Thanks & Regards,
Nagarajan

Similar Messages

Error message occurs when preview crystal

I have one formula "Year+1" in my crystal report based on parameter "ZYEARMONTH". When I check this formula sytax, system show me no error founds. But, when I preview this crystal report, I get error message like "the string is non-numeric" with the following formula.
syntax: ToText((ToNumber(Right({?[ZYEARMONTH]}, 4) ) + 1),'0000')
Please give me a guide how to fix this issue. Thanks all of you in advance.
Sudree

This error means you're trying to convert a non-numeric value into a number. In your case, you're attempting to convert the right four characters of a string parameter into a number. If you're getting this error, then your right four characters aren't numeric and can't be converted. Please provide an example of how you enter the parameter value.

HT1040 trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.

trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.
if i clear the book so that it is all blanks and then try to load in the pictures i have it loses the chronology of the pictures that i had established in the album.
is there a way to import photos into an ibook template and keep the original order of the photos without having to do them one at a time?
also, is there a way to insert a photo rather than just dragging it? i have tried the cut and paste funciton but it doesn't seem to work, the target site doesn't seem to register with iphoto.
many thanks for your help.

Photos are added to book in chronological order. So if you want to add them to a book in the order you have placed them manually in an album do the following:
1 - select all the photos in the album.
2 - use the Photos ➙ Batch Change ➙ Date menu option as shown here. Select any date and add 1 minute between photos.
3 - select just one photo from the album and create a book from it.
4 - in the book click on the Options button ➙ Book Settings button and make sure the checkbox for Auto-layout pages is unchecked.
5 - drag the album with your book photos onto the book icon and they will be imported into the Photos tray of the book in your pre-determined order but not into the pages themselves.
OT

Crystal Reports 2008 crashes when previewing image with graphic location

Hi,
I'm using Crystal Reports 2008 for SAP Business One. When I try to insert an image with a UNC graphic location (browse to a UNC drive for image) and I preview, Crystal Reports crashes with the following debug info:
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     crw32.exe
Application Version:     12.1.0.892
Application Timestamp:     48de4bbc
Fault Module Name:     cslibu-3-0.dll
Fault Module Version:     12.4.0.966
Fault Module Timestamp:     4daed0a1
Exception Code:     c0000094
Exception Offset:     0002d7fd
OS Version:     6.1.7601.2.1.0.272.7
Locale ID:     1033
Additional Information 1:     0a9e
Additional Information 2:     0a9e372d3b4ad19135b953a78882e789
Additional Information 3:     0a9e
Additional Information 4:     0a9e372d3b4ad19135b953a78882e789
Any idea why? If I trun graphic location off, it works fine.
The code I'm using to pull image is:
sapserver\B1_SHR\Bitmaps\Versailles\" & {RSM_Inventory_Images;1.PicturName}
Thanks.

Through Startu2014Run are you able to view the image by choosing the following path ?
sapserver\B1_SHR\Bitmaps\Versailles\" & {RSM_Inventory_Images;1.PicturName}
Also try to insert any image which is on your local hard drive and try. I think this is because, CR is unable to access the images which are on UNC.
Thanks,
Sastry

10.5 - Finder crashes when previewing jpgs created in photoshop

Finder crashes when previewing jpgs created in photoshop. It seems to be associated with the preview. The finder crashes whether it is in cover flow or column view.
The only workaround I could find:
Switch finder to list view. Open the jpg (again) in photoshop, select all and copy. Create an new doc of the same size and paste. Save as jpg. Don't ask me why but it will then preview correctly in both cover flow view and column view.
It's a pain to open and re-save... anyone else having issues with jpgs? or know of a quicker workaround?

This is definitely a common problem.
I discovered this after saving some artwork from illustrator as a PDF. Opening it in Photoshop (to get the bleeds), and then saving out as a CMYK colourspace JPG. I tried a dozen times to attach it to an email to my client, but it kept springing back, and would not attach to a mail message no matter what I tried.
It also crashes finder/preview, and quickview, and safari when trying to look at it. If I copy the flattened artwork into a new PS document and save it out as a JPG then it's fine.
Worse - I understand that if you put one of these files in the downloads stack, then it will continually crash your dock. Nice!
This points towards some meta data problem/incompatibility between with the JPG files coming from adobe and apple's apps...
This is TOTALLY embarrassing as my PC has no problems at all with either JPG...
As someone who switched to Mac for professional reasons after several years of PC use, I cannot believe how slow apple and adobe have been to sort out such a fundamental problem.
Come on guys - less time ponsing about with iPods - remember the media industry who put you here.
Personally I'm hanging on to Leopard by my fingernails - and am so close to saying sod it, and going back to Tiger.

I have created a book in ibooks author with a custom font when previewing on the ipad the special characters within the font do not appear?

I have created a book in ibooks author with a custom font when previewing on the ipad the special characters within the font do not appear?

'custom' font sounds like you may be working with a font that is unsupported on iOS/iPad.
Supported fonts are found in the pull-down font menu in the toolbar. Authors are obligated (mostly) to stick to that list.

Document history Crystal layout

Dear All,
I am working on sales quotation layout. Currently, our client (on SAP 9 CA localization) wants to print the history instance (open the document >> change log >> choose one of the old version >> print)
I am testing the system default layout (Crystal report layout)
When I open the old version of the document and click print, it will NOT show me anything unless it is the latest version of the document.
When I print it by a PLD layout, it can print me the document with the old information.
Enclosed is the screen shot.
What I am trying to do here is, to let the user be able to print the document before and after changes.
Later I will add the history instance number to the document so that they know which version they are printing.
However, none of the Crystal report works even the system default Crystal report layout.
Can anybody please advice? Thanks!
Regards,
Yuka

Hi Nagarajan,
Thanks for the answer. What I need is, open one of the history e.g. history instance #1, then print it with the instance number. So in this case, query doesn't work for me.
The note tells me, don't use Crystal report layout if I want to print the history instance.
Then, my question is, how to show instance number to the PLD layout? I can't link ADOC.loginstanc to the PLD.
There is another option is, create a new layout by using ADOC and ADO1 tables. But, I can't pass log instance# to the layout. It asks me the log instance parameter when I print preview the layout.

Show grid frames when previewing and printing

Hoping somebody out there can help..
I'm starting a new business, and teaching myself CS6 from scratch to design a 16 page catalogue in the next 4 weeks. I'm working with a 4, 6 or 9 grid structure per page using frames to create the grids. However, i can't work out how to show the frames holding the product information when previewing and printing the brochure. I also want to lock the template frames in place if possible so they can't be altered when inserting text and images.
I've watched a few tutorials and done quite a bit of research, but can't crack it!
Yours hopefully...
Hugh

Eugene,
Thanks for the feedback. Your answer helped me realise that text/Image frames aren't the right tool to create my catalogue page box template, but i haven't yet figured out which feature i should be using or how to edit the layout i want to copy! (below)
I've done some more research on Frames, Layers, Tables & Rows, but still can't see which feature i should be using to replicate the page layout below to be printed and which will contain the product information.
Any suggestions?

When previewing my website in Dreamweaver flash crashed - I need to change the security settings but don't know how to do this

I use Dreamweaver and Adobe Bridge to create slide shows on my website. When 'previewing' the slideshow - in Dreamweaver it opens Firefox - it crashed and the dialogue box opens telling me to change my 'settings' - it doesn't do this if I preview in IE - which I don't understand. I need help in knowing where to go to change the security settings so that this doesn't happen. Incidentally, when I am on the web through Firefox, my website slideshows work perfectly>

You can set the pref dom.ipc.plugins.timeoutSecs to to -1 on the about:config page to disable the timeout.
See also http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

User defined fields in Crystal layout

Hi All,
I want to add user defined field values in crystal layout for Sales order, but its not listed in RDR1 tables there but it's available in SAP query manager view. How can i get that in Crystal reports. please suggest on this.
Regards
Sree

You can then remove the key and the fields in the database will keep their correct definitions rather than varchar(max) which is causing the initial problems.
Adding extra keys may uause performance issues if you leave them there for a large table.
I have also had issues of varchar(max) fields causing database connection issues when running the reports in 8.81 PL07.
Rob

Error: Failed to open the connection when opening Crystal Report in CMC or

Hello all,
I am getting theError: Failed to open the connection when opening Crystal Report in CMC or Infoview
with access database as the datasource which is in the network drive.

Hi Sonali,
This is because Crystal Reports does not recognize database connection from share drive
1. Save the database locally on server machine
2. Create a new database on server and link the new database with the database on Network.
Steps to link the database.
1.Create a new test database on server.
2. Go to File --> Get External Data --> Link tables | Select the database on Network Drive.
3. Select all the tables from the database.
4. Save the Database e.g. Test.mdb.
5. Create an ODBC Connection on server machine, with the same name as on client machine using test.mdb database.
Note: Click on Advanced button, enter the default user id and password for the odbc connection, it is not mandatory to give Login Name and Password, only if the user id and password are given then we need to provide the same user id and password in the CMC database configuration.
6. Create a report using this ODBC connection, and save the report to Enterprise.
Regards,
Navin

Applet does not load on app server when Free Design Layout

Hi,
I have to embed a an applet in a webpage of an web application. Before I go on to anything.. let me first tell you, I am using Netbeans 6.0
As shown in the tuorial:
[http://www.netbeans.org/kb/articles/tutorial-applets-40.html]
1. I first made the "Applet" source say HelloApplet. java. After compiling and running it I get the HelloApplet.jar.
2. I created a WebApplication and then from the properties -> packaging -> I "Add Project" HelloApplet.jar.
3. Then I a webpage I "embeded" the applet.
4. I run the web app and the applet gets loaded and everything is just fine.
But before I go on I must tell you that the applet was designed in Null Layout. Now I edited the applet source once again and changed the layout to Free Design Layout*. ( this is available from Netbeans..on the HelloApplet.java .. go to the design view.. right click on the form and from the context menu you can change the layout to FreeDesign or whatever you might want).
When I expand the "Libraries" node I see the that the library Swing Layout Extensions - swing-layout-1.0.3.jar has been added.
When I "run" the "HelloApplet.java" file, the applet is shown in the appletviewer. No problems with that.
But!
When I try to Clean & Build and Run the WebApplication, the applet does not get loaded. On inspecting the java console I see the following error:
java.lang.NoClassDefFoundError: org/jdesktop/layout/GroupLayout$Group
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
at java.lang.Class.getConstructor0(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: org.jdesktop.layout.GroupLayout$Group
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
... 10 moreIt clearly shows that the Free Design Layout has something to do with the GroupLayout which can be found by expanding the "Swing Layout Extensions - swing-layout-1.0.3.jar". Now when the HelloApplet.jar is created only the HelloApplet.class file gets included together with some other data but NOT the swing extensions. Hence when I run the web app the class file looks for the GroupLayout.class definition but can find it in the jar as its not included when the HelloApplet.jar is created.
But with null layout there isint a problem because null layout takes the definitions from the JRE on the machine.. and so it runs without a hitch.
My Question is : How can I run the applet with Free Design Layout? or is it possible to package the swing layout extensions in the HelloApplet.jar?<
Thanks for all your replies.
Cheers.
Edited by: arijit_datta on May 15, 2008 4:07 PM

Solved.
Here is the solution:
[http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html|http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html]
Cheers..
Edited by: arijit_datta on May 16, 2008 7:41 AM

Deadlocked error message when running crystal report

Hi All,
I need a bit of guidance as to the following problem.
Seems there is a lock being created in SQL when running some crystal reports.
When trying to run a report the following message is displayed:
Database connection Error L 'ADO Error Code: 0x
Source: Microsoft SQL Native Client
Description: Transaction (Process ID 302) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
SQL State: 40001
Native Error: [Database Vendor Code: 1205 ]'
The error is happening intermittently when refreshing the report. It does not seem to happen when no users are using the system.
Is there any way to stop this from happening? Or is this some kind of limitation with crystal and how it accesses the database?
Many Thanks,
Matt

Hi Matt
I have had this problem with long running queries as well. I ended up doing the main part of the query in a view using WITH (NOLOCK) for each table and then reporting on the view.
This had extra benefits of making the report much simpler and often making the query more efficient and easier to test as well.
Rob

Portal Runtime Error When Previewing the BI Report iViews

Hi Experts,
I hope this is the right place for my issue. I have an issue previewing the BI reports that I have created as the iViews and have put them in the portal. I am able to preview them in the BW/BI server successfully. Then I have created them in another server and got the portal runtime error. There are 2 different servers that I am working on, and there is no single sign on support on these servers.
Portal Runtime Error
An exception occurred while processing your request
Exception id: 10:21_29/06/09_0049_44107950
See the details for the exception ID in the log file.
I check the permission, and everything has been set up as the BW/BI server (Built-in Group Everyone). I still got the portal runtime error. There is another folder of BI report iViews that someone else has created before. When I preview it, it prompts me with the NetWeaver Log in page. Then it opens the BI report iView properly. Unfortunately, it will not prompt the log in page on my own BI report iViews that I have created. Instead, it shows the portal runtime error page. Any ideas how can I solve this?
Thanks,
-Don
Edited by: Don P. on Jun 29, 2009 5:06 PM

Never mind! I solved it myself.

"Speed bump" problem: when previewing on the iPad, the first page of each new chapter or section sticks and loads slowly. How can I fix it?

I am building a book with text and photographs in iBooks Author, basing the design on my publisher's layout for the hard copy version. Whenever I introduce a new section or chapter, I hit a "speed bump" when previewing on the iPad. As you read, the first page of the new chapter or section is very hard to turn and sticks as it loads. Within each section the pages flow very easily, but when you reach the next section you hit another speed bump. I have experimented with many possible solutions to no avail. It does not seem to matter whether the new section has images or just text; the speed bump occurs regardless.

Joel Pickford wrote:
However, I am finding that using fewer sections with more content in them minimizes the problem (i.e. fewer section-transions means fewer speed bumps). This is contarary to the support page's suggestion of keeping chapters and sections smaller. I am not having any problem within each section, even with lots of full page photos.
That recommendation was made, presumably, to reduce the length of the delay for each chapter. More content in the chapter means more delay when changing chapters. Of course, if you have lots of little chapters, the delay can still be annoying because, even if only four or five pages in a chapter, the delay is still noticable. Just pick something that works for your book and don't worry too much about the delay. Your readers will be familiar with it if they've seen more than one IBA book.
Will the choice of color space, s-rgb or Adobe rgb 1998, affect file size?
Should I try to compress them more- say, level 5 or level 4 in Save For Web?
Should I size the images for the iPad 2 instead of the iPad 3 retina display, since there are more 2s out there?
Which color space you use does not affect file size. Apple recommend to use sRGB, so I would stick with that. As to compression and sizing, only you can decide. Try and borrow an iPad 2 to make a judgement at what level of compression and resolution you think the images start too look bad. Your high-rez images for the new iPad will be down-sampled for display on the older models, which will introduce additional artifacts.
For my book, I simply used images at 1024 x 768 resolution. When viewed on a new iPad, they look just fine. The lower resolution is basically unnoticeable (at least for my purposes). You can view a sample of my book here: "Djembe Construction: A Comprehensive Guide". If you think the images there are good enough for your purposes, you could down-size your images to half their resolution, which will reduce file size about around a factor of three.
Michi.

DMP created in HANA when previewing crystal layout

Similar Messages

Maybe you are looking for