DMPs Need Reboot?

I've had an issue come up where the DMPs across the system will start having black screens between images, then load the images slowly. The black screen is just a symptom of the slowdown. A reboot resolves the issue, but it returns after about a month. It isn't restricted to one group or another. If I let it go long enough, it happens to all the DMPs in the system.
Is there a more permanent solution or best practice other than scheduling a reboot once a month?
DMPs are 4400G with 5.3 firmware.

Possible issue and solution\workaround other then rebooting
- Problem could be related to syslog misconfigured in default configuration
causing browser to block.   This can be worked-around by the following MIB changes:
    init.syslog_collector          change to 127.0.0.1 (Default is 192.168.1.1)
    Using DMPDM:
    If syslog is disabled, enable it and set the syslog server
    address to 127.0.0.1, disable it, save and restart the DMP.
    Using DMM:
    create a task to change the syslog server address to 127.0.0.1
    and deploy to all DMPs.
- Disabling video failover will improve transition time.
- Enable Caching on the DMP
You may want to look at some of these options and use an extra DMP to test and see what happens
T.

Similar Messages

Apple mac g5 needs rebooting from cd but it doesnt recognize the wired keyboard so i cannot give the computer any commands

my apple mac g5 needs rebooting due to me clearing the whole system, however the tower nolonger recognizes the wired keyboard,
so i cannot use the c key to boot from disk.

By rebooting do you mean reinstalling the Mac OS?
You may have to use another keyboard (preferably an Apple one) but also make sure the basics are correct, such as solid connection, not using a USB hub for the keyboard etc. Also plug the keyboard into the back of the G5 (not sure why this works but it does).

LaserJet Pro 400 color MFP(m475dw) needs rebooting to scan to network folder

If our LaserJet Pro 400 color MFP(m475dw) sits overnight or for a good majority of the day without scanning to a network folder it will need to be rebooted before it will connect to the folder.
I have tried adding a different folder and the same issue occurs. The printer is connected to the network via wireless connection.
Once the printer has been power cycled the scanner now works fine to the network.
I would like to figure out why this is necessary and find a fix for it.

Good day,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Airport Express for iTunes needs rebooting to be detected all the time

It seems that each time I reboot my macBook, my airport express needs to rebooted to be detected. I use it for streaming music only- not for internet access- and have it configured accordingly. It is connected to remote speakers and works perfectly when it has been rebooted but if I leave it on and have shut down the macBook the green light stays on but the newly rebooted computer doesn't detect the unit until I unplug it and reconnect. Anybody have any helpful info? Thanks in advance...

Is this message box indicating the Airport Express is re-connecting to your internet service and if so, is this Airport Express connected to a DSL internet service that uses the PPPoE protocol to connect? If so, run the Airport Admin Utility, select your Express, click on the Configure button, click on the Internet tab, and check the box to "always stay connected". Update settings to the Airport Express.

Needs reboot after single FF use, buttons freeze, etc, etc.

Firefox problems - second request, last one two weeks ago
System claims FF is running when Task Manager shows no such thing
FF can no longer load previous tabs with the This is Embarrassing screen and I have to click to restore
FF will never reload a second time except after a reboot, it can last hours or punk out in a half hour for no apparnet reason
Recently it has been refusing to answer clicks on any of the upper chooser buttons, including the tab row
Constant reinstalls of the latest 3.6.13 FF do nothing.
eBay refuses to enlarge item pictures though it will after clicking Explorer
FF has turned into a monster in the last few months and I at my wits end. I use eBay and the Net religiously. Is there anyone monitoring current FF problems, particularly those who engineered it? At present, this is not a program to be proud of.
WinXP3, 2MB, tons of HD space.
Virus checks every other day come out clean.
I do use Zone Alarm; can it be as simple as that?
Since the 'about:crashes' has nothing since Mar 1, 2010 (and I don't rememeber sending that one or the ones previous), it can't be germane to recent problems. The above list of events has never happened before. 1-17-11

-For Sun Cluster 3.1 4 on Solaris 10 1/06 SPARC no additional patches are needed.
-For Sun Cluster 3.1 u4 on Solaris 10 1/06 x86 no additional patches are needed but you need the following workaround:
the following workaround should be done before rebooting the cluster
node after scinstall.
Add "etc/cluster/nodeid" to "/boot/solaris/filelist.ramdisk"
# bootadm update-archive
#reboot

IBook needs rebooting each time to show up in Network.

If the iMac is awake before the iBook starts up, I can find it in the network list when I need to, connect, then transfer files etc. But if the iBook is already on when I start up the iMac or just wake it up, it doesn't see it. The only solution is to reboot the ibook which then immediately shows up in the list. Any ideas as to what might be causing this?

Hello Simon,
browsing networked macs can be an issue. This could be a fault with the type of network your on.
The long term solution is to connect to the servers using the finder keystroke 'command +k' and use the bonjour name or IP address of the server.
You can then add that server to your favourites.

How could I know whether Microsoft patch need reboot or not ?

We use win2003R2 and win2008R2 and so on in the domain environment.
When we apply the Microsoft-provided patch, is there any way to know it need OS reboot in advance ?

Thank you.
It is not about specific patch.
I would like to know how to identify the microsoft-patches need OS reboot or not , perhaps from information from Microsoft web site.

DMP-4400 5.1 When Live stream drops the DMP requires reboot

We are using the Exterity TV Gateway to stream live TV to our DMP's when the Signal drops on the Exterity as it does several times a day the TV looses Audio and the screen goes blank for 5 seconds shows video and then blank again. This continues until we reboot the DMP. Has anybody come across this issue and does anybody have any ideas on a cure? The network connections are ok at the Exterity and DMP as far as speed and duplex are concerned with no errors seen. I am thinking its something to do with the multicast and the time its taking to re-join the stream but not sure how I can make any ajustments if it is.

Hi,
Do you have a resolution for this?
I'm getting a similar issue running the DMP 4400 and DMM 5.1 except I have and issue where I could get 2 channels ok but could not get others and getting the blank screen repeatedly. Rebooting the DMP does not seem to provide any resolution temporarily or not. I have a DMM, DMP and DCM all attached to the same switch. Using UDP media per channel and a presentation per channel to push TV the DMPs.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Using VLC to pickup the mutlicasts works without any issues.

Wifi, excellent signal, no interference but intermittently drops, needs reboot

I have two desktops running on my home wifi system, one is an HP, the other a Dell.
The HP is nearest the router and has full signal strength bars, the Dell is further away and has half bars. I have used the inSSIDer wifi monitoring program to verify that I am using a wifi channel that doesn't have any other strong competing signals on it. I have changed wifi channels anyway to see if the problem changes and it doesn't
The problem: From time to time, as often as once a day, the HP will lose wifi. If I wait a very long time (30 minutes or more) it will return by itself. Normally I reboot to get it back ASAP. It always returns with a reboot and, once rebooted I am good to go until the next day.
This wifi loss occurs only on the HP, the Dell has no trouble on the same network though it gets a much weaker signal. At one time, the HP was on the wifi alone (before I got the Dell) and it has had this problem all along.
Is there some wifi setting on the HP that might be causing this intermittancy? Is there some wifi setting that might regain the signal immediately without the need to reboot. Using "troubleshoot problems" (right click on the wifi icon) cannot regain the signal. Since it happens only about once a day (not at any particular time of day) I am living with it but it is irritating.
This question was solved.
View Solution.

Hi,
You can buy a replacement WIFI card on eBAY for under $10. That might tell you something about the card's reliability and performance.
I suggest that you go back to the original HP driver. If that doesn't change the issue then replace the WIFI card.
The HP part number that you posted, HP p/n 638403-001, is for the RT 5390 and not a 6390. You should correct your information to avoid confusion.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Airport express needs reboot to be seen by iTunes

My airport express needs a reboot to be seen by iTunes. Wireless network is Linksys EA4500 with 2.4 Ghz and 5Ghz networks, Linksys RE2000 range extender set up for 5Ghz and airport express set up for 5Ghz. Latest version of iTunes software and apple express firmware. iTunes running on PC.

Thank you for clarifying that for me.
It may be possible that the placement of the AirPort Express in relationship to the extended Linksys Wi-Fi network may be the factor that it has to be rebooted when attempting to stream from iTunes.
Where do you have the Express in relation to both Linksys devices? Same room, different room, different floor? Also were is the iTunes "server" located, again, in relation to all three device when streaming?
Does the Express still exhibit the same problem for the following two conditions:
When the Express is placed in the same room as the Linksys EA4500 router with the network still extended?
When you temporarily disconnect the RE2000 so the network is no longer extended?

WRT610N wireless needs reboot

I have a WRT610N V1 w/ the latest firmware Ver.1.00.03.15. The wired connection works great so far. The wireless connection works well also, that is, when I can connect. The problem is that I have to reboot the router every couple of days to be able to connect to it wirelessly. Once connected, it works fine. But if I disconnect and come back the next day, chances are I have to wire up and reboot the router. Any ideas on how to fix this? Thanks.

As you already have a latest firmware installed on your Router, Have you tried to reset your Router and re-configured all the settings back on your Router from the scratch?
On your Router setup page, click on the Wireless Tab and under 2.4GHz Wireless Settings change the Radio Band to Standard- 20Mhz Channel, and below change the Standard Channel to 11 and click on Save Settings.
Once you are back to the same page, Then you need to click on the Sub tab under Wireless "Advance Wireless Settings" and under 2.4GHz Wireless Settings Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now try to connect to your Wireless Network and check if you are facing the Same Problem.

New WRT320N wont keep connection, lags out and needs reboot.

OK so I just installed my brand new WRT320N and its been giving me massive problems.I upgraded from a WRT54G and never had this problem befor. The router seems to lag out. The connection doesnt just die and reboot. It seems that it stalls and lags out. I cant connect to anything. Not the router, not the internet, nothing. Everything just gets stuch in a perma loading state like it wants to load up but it cant.
I have just about tweaked everything inside of the routers settings and nothing seems to make it stop. I have reflashed and updated the bios twice. I have poked around and looked at other posts and tried what was suggested, but none of it has worked. At this point im thinking I have to RMA the silly thing but I am hoping some one might recognize the problem and can help me out.Also, this problem is strictly wired, not wireless. It happens to the master PC where the router has a hard connection.
I am willing to entertain any and all options and suggestions.
Thank you all for you time.
If you need any more info on my rig, its a reply away.
Message Edited by lumpking69 on 07-23-2009 01:47 PM

As you have already Upgraded the firmware of the Router, Have you resetted your router and re-configured all the settings on it again. If not then Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Once you login to the Router setup page, Below the setup tab you will find MTU, which will be set to AUTO, so you need to change it to Manual and change the Size from 1500 to 1365 and click on Save Settings.
Reduce the Card Speed on your Router. Click on the Start button >>> go to RUN>> type in "ncpa.cpl"- hit OK >>Here(Network Connections) right click on the ""Local Area Connection"" icon and select properties-Here click on the "Configure" jaspal button- Click on the "Advanced" tab- In the "Property" box highlight Link speed and duplex/Connection type/Network or Media type- And in the "Value" box select 10 Mbps half duplex/ 10 base T/10 base half mode and click on OK.
Now check if you still have the same problem with the router.

10.6.4 AFP - ACLs - Workgroup Manager :: changes need reboot to take affect

hello community
still new to OSX Server I am a bit confused regarding changes made to
AFP - ACLs - Workgroup Manager
do changes really need a server reboot to take affect?
scenario:
*Workgroup Manager ...*
User1
User2
User3
GroupFolder1 :: Members -> GroupSubFolder1.1 + GroupSubFolder1.2
GroupSubFolder1.1 :: Members -> User1
GroupSubFolder1.2 :: Members -> User2
*AFP shares & folders with ACLs ...*
Folder1 :: ACL read for GroupFolder1
SubFolder1.1 :: ACL read for GroupSubFolder1.1
SubFolder1.2 :: ACL read for GroupSubFolder1.2
(SubFolder1.1 + SubFolder1.2 are nested into Folder1
to make it clear)
this workz perfect!
if I now switch in Workgroup Manager the memberships to eg.
*Workgroup Manager ...*
User1
User2
User3
GroupFolder1 :: Members -> GroupSubFolder1.1 + GroupSubFolder1.2
GroupSubFolder1.1 :: Members -> User2 + User3
GroupSubFolder1.2 :: Members -> User1
this will only take effect when rebooting the server.
I tried to ...
start/stop AFP
restart ldap, by deselectingsaving/selectingsaving the SSL cert for OpenDirectoryService
restart the clients
nothing helped but restarting the MacMiniServer
server and all clients are running 10.6.4
cannot be that one has to reboot the whole machine to make AFP - ACLs - Workgroup Manager changes take effect?
ok I am running a rather small setup, but what if ya want to integrate a new user into a bigger environment? this will lead to a disconnect for all users connected or an "over-night-wait-time" for the new user, whilest scheduleing a reboot somewhere in the night? but even then what if people are connected in different timezones overseas via vpn?
where is the hook to make the settings take effect immediately after saving the changes?
any other info I can provide to reproduce/solve the issue?
rgds,
g.
Message was edited:
tried to correct my spelling, please bare with me I am no english native

Well that suggestion from the site referenced above about tearing the OD down, deleting the slapd.conf files and bringing it back up didn't work. 10.5 servers still see changes in OD as they happen and 10.6 servers don't see the change until around 10 minutes later.
Anyone run across this and fixed it?

Linksys WRT54GS Ver 5 needs reboot every 10-12 hours after wiring it to LG BD590 Blu-Ray

Had this router hard wired to a desktop - everything has been fine forever. Moved it so I could hard wire it to the Blu-Ray player for watching Netflix, etc. Everything works. Except the Router needs to be rebooted every 10-12 hours. Unplugging it for 30 seconds works. The router seems to be working, but the wireless signal to the other computers in the house, although showing strong, will not connect to the internet, Router is getting its internet straight from the Comcast modem. I have the latest firmware installed in the router. Any ideas greatly appreciated before I throw this thing out.

Try to re-flash the firmware on your router.
Connect the computer with the Ethernet cable to the router.
Download the latest firmware from Linksys website and save it on your computer. Open the setup page of the router. Click on Administration tab and go to Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and upgrade it on your router.
After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.
Also try to change some advanced wireless settings on the router. Click on Wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.

Apple TV needs reboot for every use

My second-gen ATV is connected to a Sony TV via HDMI. Every time I try to use the ATV it requires a hard restart by unplugging/replugging its power cord. How can I avoid this?

I am having the exact same issue, my Apple TV (2) is plugged into my receiver, it won't even turn on without a "hard" reboot.

DMPs Need Reboot?

Similar Messages

Maybe you are looking for