DMR not updated from Prepaid service order

Hi,
we are creating DMR in ECC system when the items are released in CRM system for a prepaid service order.
The DMR is created successfully and the transaction history is also updated as expected.
The DMR document is not updated when the prepaid service order is updated.
Kindly help.
Thanks in advance.

hi,
Confirmed service items should appear in the service order with the status confirmed.These confirmed items can be seen in the assignments tab page in the service order their status should show as complete.
Regards
Raj

Similar Messages

  • Status is not updated from delivery to sales order item.

    Dear Folks,
    One user created sales order with 10 line items and he created delivery and later he deleted line item 30 in that delivery document and with remaining 9 line item he done the PGI & Billing.Here what is the problem is the deleted line item in sales order status showing as completed and delivered quatity showing as 10.Status is not updated from delivery to sales order item.Please let me know how to resolve this?
    Thanks & Regards,
    murali.

    Dear Murali,
    Please go to VTLA transaction then select your delivery and order types after that go in to the details of the item level settings here you check field called Update document flow under Control data tab.
    I hope it will help you,
    Regards,
    Murali.

  • Project Revenue Plan Not Update from Sales Order Item

    I am generating a network and project from the sales order item using Assembly processing. I am using milestone billing on the sales order item and the milestones attached to the project network activities are appearing as billing blocks on the sales order item billing plan. However, the project revenue is not getting updated from the sales order billing plan. Can someone please help?
    I have deleted the billing plan on the billing WBS element and activated revenue planning update from sales order in cusomization for PS. I am looking at CNS41 under the project revenue sched in version 0. Is there a different report I should be looking at?
    Regards,
    Venkat.

    HI Venkat,
    You are looking at the correct report & I believe you have also done the necessary customization. If you create a sales order and reference it to a quotation, the related plan values in the WBS element are refreshed automatically.
    When the payment data is recorded, the terms of payment and the customer payment history are taken into consideration. One of the probable causes could be the credit limit of the customer might have been exceeded. Take help of your SD consultant & increase the credit limit for that customer (from the sales document), t-code FD32 if it is permitted in the business.
    After the new credit limit is set execute the following steps:
    u2022     Go to the t-code Change billing request (VA02)
    u2022     Open the required billing request
    u2022     Remove the account assignment of WBS element from each line item
    u2022     Save the billing request
    u2022     Reopen the billing request in change mode
    u2022     Reassign the WBS elements to all line items
    u2022     Now the changed credit limit will take affect
    u2022     Check the Planned Revenue for the said project in CNS41, it should get updated.
    Rgds
    Deepak

  • Lync 2013 Photos will not update from AD

    I recently joined a company who has Lync 2013, Exchange 2010 and AD is at a 2003 functional level. We are experiencing issues where Lync photos are not updating from AD correctly. I have checked the pre-reqs;  Replicate this attribute to the Global
    Catalog is set for the ThumbnailPhoto attribute. We are also forcing photos from AD only (or no photo) by setting the following:
    "Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto PhotosFromADOnly"  
    and finally we are setting the photo in ad using:
    "Import-RecipientDataProperty -Identity "Test User" -Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
    The pictures being uploaded are under 10KB and update within Outlook but never updates on Lync. I have also manually tried running the "Update-CsAddressBook" command from Lync and waiting 24hours + but the photo will not update in Lync. I have
    also tried a 3rd party utility that grabs the attribute directly from each DC individually and each node is displaying the correct photo. Any Ideas?
    EDIT: I did some more testing and can say with quite a bit of certainty there is something not quite right on the Lync side of things. I started with the company over a month ago and although users can see my original photo that was added to AD, I myself
    do not even see it loaded in my client yet. I've completly dumped my local Lync cache but no change. Is there a specific Lync Server service that handles retrieving/pushing photos to the Lync clients?

    Thank you so much for your reply, it was very helpful in understanding how the service is suppose to work however I have still not been able to correct the issue.
    What I have found by using your article may have narrowed down the scope of the problem. I was able to find that on our Lync file store, the cached contacts/photos are being updated daily (as expected) and actually contain the correct photos. I confirmed
    this be using abserver.exe on the .lsabs file and then locating the contactID for a few users I know are not updating properly. Once I have their contact ID I simply look for their .photo file in the cached files, copy it out to a different location and change
    it to a .jpeg. To my surprise the photos are actually the correctly updated ones, so why are these no getting to the users/clients? I have gone through and deleted my local cache folder as well as the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync
    but unfortunately no change on my Client. I still see these users original photos.
    Another piece of the puzzle; We are also working on letting mobile devices connect to our Lync infrasructure as well. This is not fully functional yet however during my testing I did get Lync client for android running for a little while and low and behold
    the pictures are actually correct on my mobile device!! Surely this must give some kind of clue?
    We are planning to upgrade Exchange from 2010 to 2013 and I hoping that leveraging the HiDef photo capabilities for Lync 2013 with Exchange 2013 may fix this issue. What do you guys think?
    More info on the environment:
    4 main sites + remote users
    ~7DC's - 2003 DFL (1 at each site + a few at HQ)
    3 Lync Front end servers (2013) (All located at central HQ)
    2 Lync edge server (2013) (All located at central HQ)
    1 - 2010 Exchange server (Located at central HQ)
    2013 Lync Client version 15.0.4675.1000 MSO 15.0.4675.1002 64bit
    About 100 HP 4110 Lync Edition Desk phones
    Users's workstations are either Windows 7 Enterprise or Windows 8.1 Enterprise

  • Copy General Task List from one service order to another one

    Dear Guru,
    I have the following questions:
    1- From a service order in IW32, how can I see the link between the operations and components?
    2- I want to be able to copy all the operations and all the components contained in a service order into another service order for a similar type of equipment. Can someone help me step by step on what needs doing?
    KR
    Christian

    Hello Sebastian,
    Many thanks for your quick reply indeed on this.
    Now this is the catch: I know that I could create a new service order based on a previously created one using IW31, however in my department they are creating sales orders for equipments in the normal SAP SD flow.
    In one the material line they enter a service material which is converted into a ZC03 (Service order) when saving the normal sales order which creates automatically a Service Order number.
    Because they create a lot of those service order in that way, they want to be able to populate them with the same list of operations and relevant components all the time.
    If they would be using IW31 to make copies, they would have to cancel the previously generated service order deriving from the regular Sales Order in SD which we want to avoid simply because it alters the original sales document flow.
    Question:
    1- I tried to copy the description of the task lists present in my service order thinking that would also copy the list of relevant and subsequent components defined for each task. The system has only copied the description of the tasks but not the components.
    Is there a way we could copy a list of general tasks to automatically have those coming with the relevant components?
    Please advise
    KR
    Christian

  • No condition update from the sales orders exist - VK322 Message

    Hello All,
    I have activated " Condition Index" & " Condition Update" flag for one of my discount condition type and then created it's condition record along with scales on three levels. The condition type which I mentioned above is set as " Value Scale" in Scale Basis for checking the document value and apply the applicable discount percentage.
    I have created three sales orders wherein the discount percentage is getting applied as per my condition record ( so, the document value is getting accumulated and compared with the condition record correctly )  but when I try to check the cumulative values ( ctrl +shift + F4 ) from the condition record, I get information message " VK322" mentioned in the subject.
    VK322 -
    No condition update from the sales orders exist
    Message no. VK322
    Diagnosis
    The following causes are possible:
    1. There are no sales orders for the condition record that you selected.
    2. Updating condition records in the sales order entry is not active.
    Procedure
    Concerning 1:
    Check the sales orders created for the condition record that you selected.
    Concerning 2:
    Activate the updating for condition records in the sales order entry.
    I have checked everything in SPRO for this but could not find anything which can give me a clue to resolve this problem, especially " Concerning 2" part of this message.
    My requirement > To be able to see the cumulative values from condition record.
    Also, in which table the accumulated values get stored?
    Appreciate your expert advise on this issue.
    Regards,
    Hrishi
    Edited by: Hrishikesh Bhalwankar on Sep 13, 2011 1:59 AM

    Hello Everyone,
    I would like to thank each one of you for giving valuable inputs in regard to my requirement and I would like to let you know that I am able to achieve the results as per the expectation.
    I would also like to share some key things which I did ( with the help of all your expert inputs ) due to which the requirement is met:-
    1. Activation of ' Condition Index, Condition Update' in V/06 for the discount condition type.
    2. Maintained ' B - Value Scale' in Scale Basis for the said condition type in V/06 - my requirement was to check against a value to apply the necessary scale base percentage.
    3. Activation of ' S071' info structure via OM01
    4. Condition record maintenance as per the required scales.
    4. Written a new routine to check the accumulated condition base value from S071 along with the current document condition base value.
    5. Put this routine in ' Scale Formula' in V/06.
    This is giving me the perfect results for the correct application of the discount.
    Just last question - How to re-organize the S071 info structure as I tried to re-organize it with Standard Program ' RV15F001' but it is not re-organizing this info structure... Any idea on this?
    Thanks a lot friends for all your advice...
    Regards,
    Hrishi
    Edited by: Hrishikesh Bhalwankar on Oct 11, 2011 2:11 AM

  • Delta records not updating from DSO to CUBE in BI 7

    Hi Experts,
    Delta records not updating from DSO to CUBE
    in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
    I cheked in Change log table in DSO its have 5 records
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -  -1
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
    ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
    but active data table have one record - 0
    how to corrcct the delta load??
    Regards,
    Jai

    Hi,
    I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
    Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
    The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
    The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
    Is this not what you see in the cube? were the earlier req deleted from the cube?

  • After I sync with iTunes my iPad Calendar is not updated from my computer where I keep my dates on Abacus. It used to do this. What's wrong?

    After I snync with iTunes my iPad Calendar is not updated from my computer where I keep my dates in Abacus. It used to do this.

    Follow the instructions of tt2 in: https://discussions.apple.com/thread/5822086

  • IPad 2 will not update from version 4.3.5 (8L1).

    I got an iPad 2 from work and it will not update from version 4.3.5. There isn't even a software update option in settings. I have reset and erased it a few times, and still no update option. I have plugged it into my computer to try to update it that way and every time iTunes prompts me to download and update the latest version, it loads for a few seconds and then I get an iTunes message that says "The IPad software update server could not be contacted. Make sure your network settings are correct and your newtwork connection is active, or try again later." the network connection IS active, I can use safari, and I have "tried again later" and still no update. PLEASE HELP!

    Naalamc wrote:
    It's an ASUS, Windows 8, Version 11.1.3.8
    Thank you.
    Your iPad has iOS 4... See Here >  http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • My contacts are not updating from the iCloud. How can I actively go and retrieve them?

    My contacts are not updating from the iCloud even with "push" on. How can i actively go and retrieve them?

    Hello there, Lk354.
    The following Knowledge Base article offers up some great recommendations for troubleshooting issues with using iCloud Contacts:
    Get help using iCloud Contacts
    http://support.apple.com/kb/TS3998
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • CC Photoshop not updating from 14.0 to 14.2.1

    Hi All,
    I'm having an issue where my CC Photoshop will not update from version 14.0 to 14.2.1.  I've signed out, uninstalled the Creative Cloud desktop app and re-installed it, but the issue persists.  I also uninstalled and re-installed CC Photoshop and it still downloaded and installed the other version.  Can anyone help point me in the right direction with what to do next?
    Thanks!; trouble

    Moving this discussion to the Creative Cloud Download & Install forum.
    Rocketscience I would recommend reviewing the installation log for the update to determine why it is failing.  You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  You are welcome to post any specific errors you discover to this discussion.

  • Net Price from the Service Order

    Hi Experts,
    I want to read the net price from the service order, in the order_read_ow FM I am getting the pricing conditions tab and getting the prices related to the conditions.
    Is there any way to get the net price directly.
    Thanks in Advance,
    Praveen

    Pls use the FM CRM_PRIDOC_READ_OW. You can pass the header GUID.

  • HT201210 My ipod touch 2 gen will not update from IOS 4.2.1

    My Ipod 2Gen will not update from IOS 4.2.1 keeps saying this is the most up to date software. Does the 2 Gen Ipod not allow anything higher than 4.2.1. HELP PLEASE!!!!

    iOS 4.2.1 is the highest supported iOS version for the iPod Touch 2nd Generation.

  • My iPhone will not update from version 4.1

    My iPhone will not update from version 4.1, everytime I try to update on the iTunes iPhone screen, the response says "your iTunes version is current"....I am not trying to update iTunes, I just want to update my iPhone. How do I fix this?

    You must purchase 10.5.8 from an Apple store, either in person or online. You can also update to 10.6.8 (Snow Leopard) if you have an Intel Mac. The current version is Lion, (10.7), but you must have Snow Leopard installed to upgrade to Lion. You also need an Intel Mac.

  • Pages app is not updating from iCloud

    My pages app is not updating from iCloud after I installed the new ios8 and of course an update to the Pages app. Did follow the recommendation not to upgrade to the iCloud Drive on initial upgrade to iOS 8.
    When I log on line - on the iCloud site, I am able to see all the documents. These also appear on my windows iCloud Drive (Of course the updating is so slooooow  ).
    Have tried the following:
    1. Enabled Pages to update via iCloud and iCloud Drive - documents not updated
    2. Enabled Pages to update via iCloud and DISABLED iCloud Drive - documents not updated ( Pages update via iCloud switches off by itself)
    please if any one has a solution to this Help!
    or it means just be patient and it will eventually down load the documents. So Frustrating  !

    Sorry, misunderstanding.
    I've purchased Pages from iTunes two/three months ago and all worked fine on both iPhone and iPad.
    Now here is the problem mentioned above: after upgrading iOS, it is disappeared from both devices still remaining on iTunes.. but I'm not able to re-install it by each other syncronization (as I can for all the other apps) as usual.

Maybe you are looking for