DMS and Citrix XenApps?

We are looking at a possible move to a hosted solution based upon Citrix
XenApps. Does anybody have any experience of GW801 with Office 2003 and/or
2007/2010 integrating with DMS in a XenApps situation?
Does it work?
any issues or pitfalls?
Many thanks
Simon

Simon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Registery Hive on Windows 2008 R2 Citrix XenApp

Hi all,
User's Registry Hive is not being unloaded when session is disconnected and passes disconnect timeout.
When user's logoff or meet the idle timeout their registry hive is unloaded and their profile is uploaded to the roaming profiles server, then their profile is deleted off the Citrix server. When users disconnect and their session times out, their registry
hive is never unloaded and their profile remains on the Citrix server. Below are the details of the environment:
We are getting error remote desktop service busy and when we manually go to servers and unload hive of user profiles it is working fine.
We have around 60 servers on Windows 2008 R2 and Citrix XenApp 6.5
We need to know what is root cause of the issue and is their in Microsoft Hot fix for windows 2008 r2 that need to be applied.
i had checked many forums and i cannot get a proper answer.

Hello,
First of all I would recommend you to install both Citrix hotfixes and Microsoft mentioned in this article:
http://support.citrix.com/article/CTX129229
These are the hotfixes Citrix recommends you to install and they address a lot of different issues.
In regards to your registry hive issue, do your have an antivirus agent installed? If so, that could be the culprit. If not setup correctly the antivirus agent could be scanning the user profiles on the XenApp server, that's usually not recommended
as files sometimes get locked by the antivirus agent and Windows is therefore not able to unload the profile correctly.
However before getting to deep in your troubleshooting, I would reccomend installing the hotfixes in the Citrix article.

Uev.SyncController.exe crashes on the Citrix XenApp 6.5 (Provisioning server)

I'm currently implementing UE-V 2.0 which uses SyncProvide=None on the Windows 7 workstations and Citrix XenApp servers 6.5 . I'm facing the following issue on the Citrix XenApp server only and the Popup messages appear spontaneously and random on the screen.
The Event log is showing Event ID 1023 and 1000 at the moment of the crash:
Faulting application name: Microsoft.Uev.SyncController.exe, version: 2.0.319.0, time stamp: 0x5228de31
Faulting module name: clr.dll, version: 4.0.30319.34209, time stamp: 0x5348a1ef
Exception code: 0xc0000005
Fault offset: 0x0000000000013d1b
Faulting process id: 0x1f5c
Faulting application start time: 0x01cfffe5253d93e6
Faulting application path: C:\Program Files\Microsoft User Experience Virtualization\Agent\Microsoft.Uev.SyncController.exe
Faulting module path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
Report Id: 6d5695ae-6bd8-11e4-b3a3-005056890366
Has anyone experienced that? Any advices?
Thanks in advance.
Rong

Hi Fred,
Thanks for your reply. I have uninstalled .NET v4.0 and installed v4.5.2 but the issue is still there. Which .NET version is running on your server?
DAO

I'm trying to install a Citrix XenApp for work purposes and am having a hard time. The message "The installer has insufficient priveleges to this directory...

I'm trying to install a Citrix XenApp for work purposes and am having a hard time. The message "The installer has insufficient priveleges to this directory: C:\Program Files (x86) \Mozilla Firefox \Plugins \resource. The installation cannot continue. Log on as administrator or contact your system administrator." I am using a Toshiba Satellite laptop and am the only user and administrator as well. I have read other Firefox support articles and google answers but nothing has resolved this issue. Please help! Be detailed and visual if possible

There are no BIOS settings, because Macs don't have a BIOS. I don't use Parallels, but I assume it has simulated BIOS settings. You'd have to consult its documentation to find out how to change them.

Citrix XenApp and Safari

Hi folks,
I'm having some torubles using my corporate Citrix XenApp facility.
I can connect to our the XenApp corporate website, and once I'm logged in a list of applications is displayed. However, when I click on any of them, nothing happens, meaning that the Citrix Receiver software doesn't get loaded.
However, everything is working fine on Mozilla Firefox, for example.
I'm running on Mac OS X 10.9 Mavericks, latest updates installed, with Safari 7.0.1.
I wouldn't say it's a matter of plugins since I've already tried disabling them all
Using the "private" mode doesn't seem to be a solution, either
I've already tried runing in 32-bit mode, to no avail
Finally, I've already done a full cleaning on the stored data from my Safari cache. That one didn't changed anything, too
Is anyone experiencing the same issue? I've done some research, but I was unable to find a solution to my problem, even if I noticed that I don't think I'm the only one scratching his head on Safari and Citrix.
Thanks to anyone willing to help me!
Giovanni

Hi folks,
I'm new to Citrix Receiver but seem to be having similar or related issues maybe... I log onto the XenApp page of the corporate portal (data management system in my city for a social service) and I "see" the Citrix Receiver start up, the app loads, then a message about "degraded video" to one display (fine, I'm using dual displays), a quick "flash" of what I think is the app screen and ... nothing. Clicking the app again generates the horrible "You already have an instance running" error so I know the receiver is running. But I can't access it. Firefox is the same. Same issue even in BootCamp for Windows 7 Ultimate. Stumped.

Adobe Creative Cloud (Photoshop, Illustrator, etc-) through Citrix XenApp 6 / 6.5.

We would like to deploy the Adobe Creative Cloud (Photoshop, Illustrator, etc…) through Citrix XenApp 6 / 6.5. Does anyone know if this is possible – are there any deployment guides. I haven’t been able to find any so I’m assuming it’s not officially supported.
Thank you
Stuart

We have a few of the products installed. You will find they work okay but nothing replaces working locally.
We are, however, using the Enterprise version that is not tied to cloud accounts.
We have had to play with the video setting of Citrix for better Quality. If you ratchet them up to high for someone that is doing high end editing your performance drops significantly. The screen refresh is blocky and no one doing this work would find it usable.
We have it there fore simple editing and managing our media. I am looking for a much better storage solution that is sharable across platforms and locations.

Citrix XenApp 7.6 & VDI Plugin works for some users but not others

I have a customer with XenApp 7.6 and Lync 2013 SE. They have two users homed to the same pool, both with the same VDI client policy however on one account the VDI pairing works fine over Citrix XenApp, but the other the pairing fails. On both accounts I
get prompted for the credentials, however the second account will not authenticate. I have tried domain\username, domain.local\username and [email protected] but all fail then I get the red cross through the VDI icon.
This is all from the same Windows 7 machine, all user accounts are within the same AD domain.
If anyone has seen similar before any assistance would be greatly appreciated as I am banging my head against the wall!
Lync Tips Blog - [email protected] - If this post has been useful please click the green arrow to the left or click 'Propose as answer'

Here is some further info:
360admin - can sign in to Lync and pair correctly
msltest - can sign into Lync but the credentials are not accepted for pairing
Identity : CN=360 Admin,CN=Users,DC=localdomain,DC=co,DC=uk
VoicePolicy :
VoiceRoutingPolicy :
ConferencingPolicy :
PresencePolicy :
DialPlan :
LocationPolicy :
ClientPolicy : HEADSET_USER
ClientVersionPolicy :
ArchivingPolicy :
ExchangeArchivingPolicy : Uninitialized
PinPolicy :
ExternalAccessPolicy :
MobilityPolicy :
PersistentChatPolicy :
UserServicesPolicy :
HostedVoiceMail :
HostedVoicemailPolicy :
HostingProvider : SRV:
RegistrarPool : LyncFEG.localdomain.co.uk
Enabled : True
SipAddress : sip:[email protected]
LineURI : tel:+44**
EnterpriseVoiceEnabled : True
ExUmEnabled : False
HomeServer : CN=Lc Services,CN=Microsoft,CN=1:3,CN=Pools,CN=RTC Se
rvice,CN=Services,CN=Configuration,DC=localdomain,DC=co,D
C=uk
DisplayName : 360 Admin
SamAccountName : 360Admin
PS C:\Users\360admin> Get-CsUser -Identity "msl test"
Identity : CN=MSL Test,DC=localdomain,DC=co,DC=uk
VoicePolicy :
VoiceRoutingPolicy :
ConferencingPolicy :
PresencePolicy :
DialPlan :
LocationPolicy :
ClientPolicy : HEADSET_USER
ClientVersionPolicy :
ArchivingPolicy :
ExchangeArchivingPolicy : Uninitialized
PinPolicy :
ExternalAccessPolicy :
MobilityPolicy :
PersistentChatPolicy :
UserServicesPolicy :
HostedVoiceMail :
HostedVoicemailPolicy :
HostingProvider : SRV:
RegistrarPool : LyncFEG.localdomain.co.uk
Enabled : True
SipAddress : sip:[email protected]
LineURI : tel:+44******
EnterpriseVoiceEnabled : True
ExUmEnabled : False
HomeServer : CN=Lc Services,CN=Microsoft,CN=1:3,CN=Pools,CN=RTC Se
rvice,CN=Services,CN=Configuration,DC=localdomain,DC=co,D
C=uk
DisplayName : MSL Test
SamAccountName : MSLTest
PS C:\Users\360admin> Get-CsClientPolicy
Identity : Tag:HEADSET_USER
PolicyEntry : {}
Description :
AddressBookAvailability : WebSearchOnly
AttendantSafeTransfer :
AutoDiscoveryRetryInterval :
BlockConversationFromFederatedContacts :
CalendarStatePublicationInterval :
ConferenceIMIdleTimeout :
CustomizedHelpUrl :
CustomLinkInErrorMessages :
CustomStateUrl :
DGRefreshInterval :
DisableCalendarPresence :
DisableContactCardOrganizationTab :
DisableEmailComparisonCheck :
DisableEmoticons :
DisableFeedsTab :
DisableFederatedPromptDisplayName :
DisableFreeBusyInfo :
DisableHandsetOnLockedMachine :
DisableMeetingSubjectAndLocation :
DisableHtmlIm :
DisableInkIM :
DisableOneNote12Integration :
DisableOnlineContextualSearch :
DisablePhonePresence :
DisablePICPromptDisplayName :
DisablePoorDeviceWarnings :
DisablePoorNetworkWarnings :
DisablePresenceNote :
DisableRTFIM :
DisableSavingIM :
DisplayPhoto : PhotosFromADOnly
EnableAppearOffline :
EnableCallLogAutoArchiving : True
EnableClientMusicOnHold : False
EnableConversationWindowTabs :
EnableEnterpriseCustomizedHelp :
EnableEventLogging :
EnableExchangeContactSync : True
EnableExchangeDelegateSync :
EnableFullScreenVideo :
EnableHighPerformanceConferencingAppSharing : False
EnableHotdesking :
EnableIMAutoArchiving : True
EnableMediaRedirection : True
EnableNotificationForNewSubscribers :
EnableSkypeUI :
EnableSQMData : False
EnableTracing :
EnableURL :
EnableUnencryptedFileTransfer :
EnableVOIPCallDefault : False
ExcludedContactFolders :
HotdeskingTimeout : 00:05:00
IMWarning :
MAPIPollInterval :
MaximumDGsAllowedInContactList : 10
MaximumNumberOfContacts :
MaxPhotoSizeKB : 30
MusicOnHoldAudioFile :
P2PAppSharingEncryption : Supported
EnableHighPerformanceP2PAppSharing : False
PlayAbbreviatedDialTone :
SearchPrefixFlags :
ShowRecentContacts : True
ShowManagePrivacyRelationships : False
ShowSharepointPhotoEditLink : False
SPSearchInternalURL :
SPSearchExternalURL :
SPSearchCenterInternalURL :
SPSearchCenterExternalURL :
TabURL :
TracingLevel : Light
WebServicePollInterval : 00:01:00
HelpEnvironment :
MSL Test Login
TL_ERROR(TF_SECURITY) [3]21A4.17E8::03/25/2015-22:39:21.107.00005d39 (SIPStack,SIPAdminLog::WriteSecurityEvent:SIPAdminLog.cpp(319))[1363057693] $$begin_record
Text: Failed to validate user credentials
Result-Code: 0x8009030c SEC_E_LOGON_DENIED
Source: LyncEdgeG.localdomain.co.uk:49201
SIP-Start-Line: REGISTER sip:domain.com SIP/2.0
SIP-Call-ID: 2cab650cdf3e4d62aea1cb0c2166c07e
SIP-CSeq: 3 REGISTER
Lync Tips Blog - [email protected] - If this post has been useful please click the green arrow to the left or click 'Propose as answer'

Cannot quit Visual FoxPro (Windows Terminal Server 2008 + Citrix XenApp 5 + VMWare vCenter 5.1)

Hi everybody:
This is not the typical question about this error, because the problem here is not about how to quit (CLEAR EVENTS then QUIT). The really and weird problem is that our application do no execute the error trapping routines (Try/Catch and ON ERROR) and tries
to directly Quit.
I have never seen something like this before, error trapping routines not executed.
I try to explain the problem better:
- The user click on the Citrix icon of our App
- Citrix shows the executed processes (establishing connection, applying user config, loading profile, etc)
- The Application (VFP 9 SP2) is started and in any moment, while loading, occurs an error that is not handled by error handlers, and it executes a "kind" of a Quit command, that we detect because have a ON SHUTDOWN to catch it, then the App shut
down and the user must click the Citrix icon and start all over again, up to 7 times, when the App really load and work.
- I think that it is useful to make clear that no QUIT command is really causing this, just the behaviour of the QUIT when an error occurs, but just while loading. If the App get completely loeaded, then everything works as expected
Infraestructure:
- Windows Terminal Server 2008 + Citrix XenApp 5 + VMWare vCenter 5.1
- There are up to 50 concurrent users max in every virtualized server
- More than 10 GB of free disk space / Up to 4 GB ram
- RAM Memory is never used to the max
- CPU (Intel Xeon) is never used to the max (up to 90% in some cases)
- Data (DBFs for temporal work) ar on local drive, not over network (to avoid network known problems with smb2-3)
- There are connection to a Oracle 11 database for permanently storing the data
About the errors:
- They are not always the same or in the same place. In example, in one execution could fail the query of SET("Printer",2), in other execution could fail a SET PROCEDURE TO xxx ADDITIVE (sometimes already loaded), in other could fail a "DO
WHILE .T." in a init event.... completely crazy, and in all cases the errors are not thrown, not a single error code, the App just try to quit, as if ALT+F4 where pressed.
- All this does not happen allways to everyone, but happens many times in the day to many many users as to be worried
- The same user can have this error many times a day, but not allways
- Some of the problems started when migrating to Windows Terminal Server 2008, but didn't notice nothing special in the beginning, but a year later (last 2014) problems tend to go worse
Tried solutions:
- For the "SET PROCEDURE TO xxx ADDITIVE" error, a "IF xxx $ SET('PROCEDURE')" check was added
- The "SET('Printer',2)" check was moved out of initialization code, so it executes when user want to print the first time. In this case was neccesary to talk with IT guys to map a default printer after the App runs, and not in background, as it
was.
- Other checks and modifications was made to minimize posibility of errors
- Adding a timeout of 5 secs in the start of the program, to force a wait
- Restart of virtual servers (not the phisical) every 3 weeks
What I suspect:
- Some Microsoft optimization (memory?, process execution?) in WTS-2008 may interfere?
- Some VMWare memory management may interfere with WTS-2008?
- Some Citrix management may interfere with both?
- Server degradation because of day to day use
Results until now:
- Apparently, adding the timeout to force 5 secs delay and the restart of the server have made a notable enhancement in App start and running
with far fewer
errors
Has
this happened to anyone?
Thanks! o_O
Fernando D. Bozzo / Madrid (Spain)

I never had this type of problems, but somewhat similar start up problems. I'd say it indicates resource problems. Low RAM can cause many unpredictable things. In my case loading much data at the begin of an application caused out of memory errors, which
were reported and logged normally, though.
I made a small tool using Windows API functions GetPerformanceInfo and GetProcessMemoryInfo, you'll find declaration and usage like usual at the News2News site. It's a bit lengthy and cluttered, but pretty much what you find there anyway, so I'll not post
my utility code.
I could quite clearly see how many users degraded available memory per session and at some time no further instance of the application was possible on the server. In my case RDP was used to start the app, Citrix will be quite the same, in the end the application
runs on some server and users see the remote running application.
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH
http://www.tmn-systemberatung.de

Oracle client with Citrix Xenapp 64 bit

Hi,
I have below queries :
1) Can we install Oracle 9i client 32 bit on Citrix Xenapp 64 bit machine ?
2) Can we install Oracle 9i client 64 bit on Citrix Xenapp 64 bit machine ?
3) Can we install Oracle 11g client 32 bit on Citrix Xenapp 64 bit machine ?
4) Can we install Oracle 11g client 64 bit on Citrix Xenapp 64 bit machine ?

Queries do not make much sense.
Oracle does not provide client db drivers for a hypervisor or vritual machine system software. It provides it for the operating system used.
Oracle provide client drivers, 32bit and/or 64bit, for a number of operating systems and operating system versions. Does Oracle provide drivers for Windows XP? Yes. For Windows Vista? Yes. For Windows 7? Yes.
See Instant Client Downloads.
Whether such a driver works on a Windows o/s that is running in a virtualised container, and can provide database connectivity, depends on the nature of that container's support for the underlying operating system, and the configuration of that container ito of network connectivity to the real world.
Oh yes - using Oracle 9i in any shape or form also does not make sense. It is a product discontinued years ago.

SAP BPC 7.5 and Citrix

Hi,
Running SAP BPC 7.5 client from Citrix XenApp 5.0 W2K8 32bit server.
The problem is the when running "SAP BusinessObjects Application set" and trying to "refresh workbook" the "Grid Layout" is empty.
I´v tryed to folow the guide in "SAP Note 1277548 - Cache folder is overwritten on Citrix"
But i´m not able to change the eTools > Client options > et local folder for P&C to "empty" but it is not posible to leave empty.
When running the app. from the server with localadmin it is working fine.
Best regards
Søren

You can greatly improve your chance of receiving a helpful answer to your question if you state the version (MS or NW) of BPC which you are using.
Also notice the sticky [note|Please do not post BPC, SSM or FI/CO questions here!; at the top of this forum whereby we announced new dedicated forums for BPC which are the proper place to post your questions regarding BPC in the future to be able to reach the right audience for your question.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team

Business One and Citrix

Iu2019d like to start a general discussion regarding the use of Business One over Citrix Presentation Server/XenApp. Specifically, how best to design this type of solution and how to overcome any obstacles that may result.
For example, my company is currently working on planning and designing a project to consolidate multiple remote Business One installations back to the corporate headquarters and using XenApp to publish the Business One client to these remote offices. This has already raised a few questions that I was hoping to get some insight on.
First, we are consolidating remote offices running both the 2007A and 2007B versions of B1. How can we publish both versions simultaneously? We envisioned installing at least two B1 servers, one for 2007A and one for 2007B, then we assumed we would have to run the B1 client on the XenApp servers either in an isolation environment or as profiled applications streamed to the XenApp servers. Is anybody else publishing both versions of the B1 client? If so, are there any issues that need to be dealt with?
Second, would you recommend installing one B1 server for each remote office/company to connect to or would you recommend connecting each separate remote office/company to the same B1 server (specific to the B1 version they need to connect to)? There are pros and cons to each scenario. If each remote office/ company has their own B1 server, they can be kept at different patch levels and the servers can be upgraded or rebooted without affecting other users, however this results in additional overhead for hardware (even if running the B1 servers as VMs) and maintenance. If each remote office/company uses the same B1 server specific to their needed version, then administrative overhead is reduced, but all will need to be kept at the same patch level and issues or reboots will affect all connected users. Also, are there issues with add-ons that are site specific, will we need to run multiple B1 servers to achieve this functionality? Are there limitations on the number of users that can connect through one B1 server, taking into consideration that different users will be connecting to different companies/databases simultaneously?
Our original overall design will consist of one SQL server for all necessary databases, one Citrix Licensing/Web Interface/Secure Gateway server, at least two (maybe more) B1 servers running 2007A and 2007B, and at least three Citrix XenApp/Presentation servers running the B1 clients.
If anybody has any questions or comments, Iu2019d love to hear them. Thank you.

My comments:
It is good intention that you try to solve all the problem in one shot. However, this is in contradiction to the forum rule. You would be better to split your questions one by one.
Another hint: the format of your message is too heavy for other users to read. You may need to reformat it in new thread so that it is not that difficult to read.
Thanks,
Gordon

Adobe Reader X (10.1.1) Visual C++ Runtime error - Citrix XenApp 4.5

Error:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program Files\Adobe\Reader 10.0\Reader\AcroRd32.exe
I work for a large government agency, and we are experiencing the above error, but we have the added complexity of Citrix (XenApp 4.5). Most of our servers run Server 2003 SP2 Enterprise.
When you log into the server's console, a PDF from a network location launches fine, however a Softgrid package which contains a link the PDF produces the error (unless you have elevated domain privileges - and then it works fine).
Using Citrix to launch the PDF via the Softgrid package or the network drive sometimes works, but randomly produces the error. Our security team will now allow us to disable Protected Mode (from our last test, disabling Protected Mode resolved the issue).
A Procmon log of a failure to launch shows AcroRd32.exe producing an Insufficient Resources error to an IPC share on all our DFS Namspace servers. After that Reader seems to terminate.

Hi,
Can you please let me know the following information:
1) Is the issue exist for previous versions of Reader as well (like Reader X, Reader 9)
2) Does your organization also use XenApp 5 or XenApp6? If yes, can you please try to reproduce the issue for the clients of those servers.
3) Please try out the following :
-- Launch Reader10.1, Goto Edit->Preferences -> General . Un-select the option 'Enable Protected Mode at startup' and close Reader.
-- Open the PDF file which was throwing Visual Runtime error and see if the error still persists.
-- After the observation please launch Reader again and goto Edit->Preferences -> General and now select 'Enable Protected Mode at Startup' and close Reader.
(Reader should always be kept at Protected Mode as it is much more secured)
Thanks,
Shakti

Need to know if Firefox 6 is compatible with Citrix XenApp Server 6 running on Windows Serve r2008 R2 virtualized on a VMWare environment. Thanks in advance!

We are setting up a new environment for a client based on Citrix XenApp Server 6 running on Windows Server 2008 R2 which is virtualized on a VMWare hypervisor. Client uses Firefox and we need to know if it is going to work or not. If not, what is the root cause (i.e. XenApp, Windows Server 2008 R2, virtualization).
Thanks again! :)

I only ask because, in the past we were able to install a related product, InDesign CS5 in Citrix. In fact, Adobe had published documentation for doing exactly that: here. I just haven't seen anything similar for Illustrator CS6 and wanted to check.

NWBC PL6 running on Citrix Xenapp 6 performance

Hey,
we are running NWBC PL6 running on Citrix Xenapp 6, but encounter slow drop-downs, screen abnormality's (as column name changes) and hickups in the screen configurations, which make the application just not performant enough to run smoothly via the citrix-server. We configured the citrix server as performant as possible, but might have missed something.
Anyone having the same issue and able to help ?
thx,
Bart.

Hi Bart,
have you a solution. We have the same issues running same versions as you except nwbc 4.0 pl13
Regards
Marc

Installation of the following Adobe Products in a provisoned Citrix Xenapp 6.0 Farm

Hello,
i have to install the following Adobe Products in our Citrix Xenapp 6.0 Enviroment:
Adobe X Pro
Adobe Photoshop
Adobe In Design
Adobe Dreamweaver
I will install the latest Version of the Software.
I'm looking for Help. Primary for the Installation and Licensing.
Regards
Tim Bartz

Hi,
I found an article that could help you. I cannot however vouch for its authenticity.
http://www.dabcc.com/article.aspx?id=10082
Thanks,
Preran

DMS and Citrix XenApps?

Similar Messages

Maybe you are looking for