DMS and Open Text Interfacing

Dear Experts,
Kindly guide me how to do customization in SPRO for Doculink for SAP Solution
Nevigation: SPRO >> Open Text Archiving and Document Access for SAP Solutions >> Doculink for SAP Solution
When I got to change document CV02N and trying to save the document this is showing me an error message -
"Error : while checking in and storing in specified path"
I feel some customization setting missing here due to which I an getting this error.
Thanks in advance
Best Regards
Sumedha

Hi Sumedha,
This error means the storage location is not defined properly. Kindly check that you have defined storage location properly.
where r u storing these documents? Also check in customizing for this in current path which you are using. In standard dms we
are defining it in OAC0 and OACT.
I hope this will be very much helpful.
Regards,
Ravindra

Similar Messages

  • How to save and open Text/csv file over APS

    Hi,
    I want to save(and open later) data from database block in text/csv file format over Application server, I did a lot of search here on Forms but didn't found a reasonable solution, Some one plz help me.
    Thanks and Regards, Khawar.

    As long as you are using the Report Generation Toolkit, there is no need to use ActiveX for the purpose of saving the Excel file -- Save Report will do that for you.  You can then export (as text) all of the Excel data and use the Write Spreadsheet File to make the .CSV file.  Here is how I would rewrite the final bits of your code --
    I cleaned up the wires around Excel Easy Table a bit.  You'll see I made a VI Icon for Replace Filename, which does (I think) a nicer job of self-documenting than showing its Label.  To make the filename, add the correct extension (.xlsx for Excel, .csv for CSV), use Build Path to combine Folder and Filename, and wire to Save Report.
    The next two functions add the Extract Everything and Write to Spreadsheet, using a Comma as a separator, which makes a CSV copy for you.
    Bob Schor

  • Captivate 6 - When publish, image backgrounds are black and open text entry is neon green

    The files are fine when in Adobe Captivate, and they publish well. However, upon playing back the published file, all the images are black. The text entry field becomes neon green.
    See attached images for "before" (in Captivate) and what it looks like "after" (upon publishing and then playing back that file).
    Thanks for any help you can provide.

    Hi there,
    Can you please confirm the complete version of Captivate (Help > about Adobe Captivate).
    Also please change the quality of slide to optimized or 24 bit, and do this for every slide.
    Go to edit > preferences > SWF size and quality > uncheck Advanced Project Compression and Compress SWF file.
    Then at the time of publishing check 'force re publish all slides'
    Thanks.

  • Implementation of SAP SUS for Vendor Portal and Open Text Invoice Mgmt

    Where can I find information that will help me establish a project plan for these two pieces of functionality?  Do they intgerate together or are there redundancies?
    Thanks
    Steve Leone

    HI
    http://www.sap.com/solutions/solutionextensions/invoice-management/index.epx
    http://download.sap.com/download.epd?context=36C1413E813C04DDEF2BA43FC4B188232881E8133C3CAD3C55902F846AED284184BF7C5FE5AE1B760EC7150215ABFB9EC24802E72D480B02
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/srm/faq
    Thanks

  • SAP Archiving & Document Access by Open Text installation problem

    Hi!
    Has anybody successfully installed the "SAP Archiving & Document Access by Open Text"?
    Currently I'm trying to Install the "Runtime and Core Services 10.1.0" - a part of "Open Text Enterprise Library Services 10.1.0".
    The install guides I follow: "Open Text Enterprise Library Services 10.1.0 Installation and Upgrade Guide.pdf" and "Open Text Runtime and Core Services - Installation and Upgrade Guide.pdf".
    All the prerequisites a fulfilled, but the process of installation fails with message "The installation of Runtime and Core Services 10.1.0 returned an error".  There is no any log or trace file created during the installation, so I cannot find out what causes the problems.
    System configuration:
    OS: Windows 2003 SP2 32-bit
    DB: MS SQL 2005
    AS: Tomcat 5.5
    JAVA: JDK 1_5_0_22
    Any idea?

    Hi!
    I had same problem with RCS 10.2.0. I've solved this with good JRE version, see KB : http://knowledge.opentext.com/knowledge/cs.dll/Open/21121763.

  • SAP Archiving using Open Text

    I need to know the basic understanding of what is SAP archiving using Open text ? I did go through Open Text web site and sdn but not of much help.
    What would be the difference between archiving using SARA and Open text ?

    The Questionnaire can include following questions :
    1.what sources are available for getting information about the SAP data archiving ?
    2. which persons are involved in the archiving project and how are the responsibilities shared ?
    3.should an external consultant be involved in the project ?
    4. Is there a time limit for the project.
    5.Which sap release are we using and is a release change planned before archiving ?
    6.How many r/3 systems are in use and are they allocated in different regions ?
    More such questions can be found in the book which snap shots are available on books.google
    Reference : efficient SAP R/3- data archiving : how to handle large data volumes .
    Best Regards
    Manthan.

  • Difference between open text ECM and SAP DMS?

    Hello All,
    What is the difference between open text ECM and SAP DMS functionality  ??
    Why we use SAP open text extended ECM ?
    please help me to know about additional feature provided by open text ECM apart from SAP DMS??

    Hi,
    normally openText is not a part of SAP Document Management but I hope that the following links could be useful for you:
    Extended ECM version 10 documentation can be ac
    cessed from following locations:
    Extended ECM for SAP Solutions 10.0 Support Package 2:
    https://knowledge.opentext.com/knowledge/cs.dll/Open/34046660
    or
    https://knowledge.opentext.com/knowledge/piroot/_doclists/extsap-basic.e
    es100002.xml
    Older versions of xECM documentation are available from following links:
    Extended ECM for SAP Solutions 10.0.0:
    https://knowledge.opentext.com/knowledge/cs.dll/Open/19614094
    or
    https://knowledge.opentext.com/knowledge/piroot/_doclists/extsap-basic.e
    es100000.xml
    Extended ECM for SAP Solutions 10.0 Support Package 1:
    https://knowledge.opentext.com/knowledge/cs.dll/Open/25691512
    or
    https://knowledge.opentext.com/knowledge/piroot/_doclists/extsap-basic.e
    es100001.xml
    Please ensure you have access to documentation links.
    Best regards,
    Christoph

  • I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

    I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

    That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
    Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
    If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well.

  • Use VBA and Excel to open Dreamweaver HTML (CS5), find and replace text, save and close

    I wish to use VBA and Excel to programmatically open numbered Dreamweaver HTML (CS5) and find and replace text in the code view of these files, save and close them.
    I have  5000 associations between Find: x0001 and Replace: y0001 in an Excel sheet.
    I have the VBA written but do not know how to open, close and save the code view of the ####.html files. Please ... and thank you...
    [email protected]

    This is actually the code view of file ####.html that I wish to find and replace programmatically where #### is a four digit number cataloguing each painting.... In 1995 I thought this was clever... maybe not so clever now :>)) Thank you for whatever you can do Rob!
    !####.jpg!
    h2. "Name####"
    Oils on acrylic foundation commercial canvas - . xx X xx (inches) Started
    Back of the Painting In Progress </p> </body> </html>
    Warmest regards,
    Phil the Forecaster, http://philtheforecaster.blogspot.ca/ and http://phils-market.blogspot.ca/

  • Applescript: open Pages doc from Templete, change filename and replace text

    Hi!
    I just got started with applescript and i want a script that does the following:
    1. open "choose from list" dialog to choose the topic of my document
    from 4 possibilities (here for example A, B, C, D)
    2. open document from TemplateXY
    3. set document name with date and topic (dd.mm.yyy) "16.02.2011 - A"
    4.inside of document: replace text "date" with the currend date (dd.mm.yyy)
    and the text "topic" with the topic chosen in (1.) "A"
    this is what i already did:
    here as colored screenshot:
    http://i55.tinypic.com/2mnhxkm.jpg
    set datum to do shell script "date \"+%d.%m.%Y\""
    --choose topic:
    set chosentopic to choose from list {"A", "B", "C", "D"}
    --text "topic" becomes replaced throug variable topic
    set searchstringT to "topic"
    set replacestringT to chosentopic
    --text "date" gets replaced by currend date (variable datum)
    set searchstringD to "date"
    set replacestringD to datum
    --open pages, define filename & do search&replace of the strings defined above
    tell application "Pages"
    activate
    set DocName to datum & " - " & chosentopic
    set (every text where it is searchstringT) to replacestringT
    set (every text where it is searchstringD) to replacestringD
    end tell
    the "choose from list" dialog works and the variables like topic, datum and the search&replace strings get defined as well
    my problems are:
    i only get an error that the text could not be replaced
    i dont know how to get a new document from a template and how to get its filename changed
    i really just started doin things with applescript for a day so i hope you can help me
    regards
    DaNylz
    Message was edited by: DaNylz

    Try something like this:
    set myFoundItems to change text text of all page items of pages 3 thru 5 of document 1
    Shane Stanley <[email protected]>
    AppleScript Pro Sessions <http://scriptingmatters.com/aspro>

  • Iphone 6 when held in landscape will not open text messages in landscape. Phone needs to be held upright and then back to landscape. The phone sits in landscape mode on a dock.

    IPhone 6 when held in landscape will not open text messages in landscape. Phone needs to be held upright and then back to landscape. The phone sits in landscape mode on a dock.

    have the same issue even after upgrading to 8.1

  • Hi, i'm new in my macbook air! i miss deleted my external hard disk few day ago and i had spend 45GBP to recovery the data! but the problem now is the text document is locked i not even can read and open the document! any solution??? urgent

    hi, i'm new in macbook air, i was miss formatted and delete all my data on my external hard disk (pic, microsoft office document and etc). i spend 45gbp to install the software fianlly recovery all the data! but why my text document can't open and read?? what's is the problem?? because i'm still a student i hv alot of assignment file cant be read and open but nect week is the deadline of submission and i have no back up of all document. So any useful suggetion solution?? i've try the way alt+command+i to unlock but it doesn't work!! help! URGENT

    when i open the file it appear some digits and word tat i couldn't understand. and the tool bar stated "Locked"
    example: 422583321135679999=@ABBCCEEFGHIKJHMIFFFHFHDCEGFFBI\cb[C?@<=>=;;;<;>>>?<>B@>?==< =>?>@A?>?@<==<;:::899:89>:9;99;9:;<;66988;359<==9987789:8::9;>>=799<>:88856::;<: 99====<::98988;;96677998887866:89::;99647878665797698899;8466646763/121120+031/1 2/.1.,.0//.+/,+.0220/0.-/21-++--1---+-.+-.--/=Pdoxx
    the digits and words tat appear on my document!
    i used MiniTool Mac data to recovery! actually b4 tat i'm using hp computer and i saved all my files in my external hard disk. When i using mac i installed the NTFS-3G but it still cant read my external hard disk and i miss deleted and formatted all the data in my external hard disk. after tat my friends suggest me to purchased the software to recover all the data,finally i got all my photo back except my microsoft office files.
    i purchased miscrosoft office software for my mac yesterday but the files still cant be read and couldnt recover back the document tat i saved! i was upset to spent alot of money but still cant get my document back!!

  • I have text documents in my email folders which I can't open.They are PDF files and Open Office files.How do I open these documents or type additional text documents?

    I have text documents in my email folders which I can't open. They are PDF files and Open Office documents. How do I open these documents?

    These are the "out of the box" file formats that you can view on the iPad as mail attachments. If the file is not listed here, you cannot view it without a compatible third party app. What is the file extension?
    Viewable document types: .jpg, .tiff, .gif (images); .doc and .docx (Microsoft Word); .htm and .html (web pages); .key (Keynote); .numbers (Numbers); .pages (Pages); .pdf (Preview and Adobe Acrobat); .ppt and .pptx (Microsoft PowerPoint); .txt (text); .rtf (rich text format); .vcf (contact information); .xls and .xlsx (Microsoft Excel)

  • Writing to and Opening a Text File from an Apex Application

    Hi there
    I would like to open a text document from apex.
    I have a screen with various parameters. Based on what the user selects, the result must open a text document with the parameters and other text.
    Does anyone know a good way to do this?
    Thanks
    Norah

    Hi there
    I would like to open a text document from apex.
    I have a screen with various parameters. Based on
    what the user selects, the result must open a text
    document with the parameters and other text.
    Does anyone know a good way to do this?
    Thanks
    NorahUnless you start a Java widget, I do not believe you can modify a file on the local users machine through the browser. Now if the file is on the server you are running from, this can be done.
    Thank you,
    Tony Miller
    UTMB/EHN

  • PCUI and OCI (Open Catalog Interface)

    Hi,
    we want to integrate a external catalog into the PCUI application qutation. The goal is to take over the shopping basket of the catalog into a Quotation. The data which should be taken over are products out of the external product catalog. Therefore the open catalog interface (OCI) should be used. The external catalog sends the shopping basket selected by the user via a HTTP Post to a so called Hook-URL which is provided by the calling application (PCUI). The calling application (PCUI) will retrieve this POST and take over the data send by the HTTP Post.
    My question is now if something like that is possible with PCUI framework?
    Thanks for your help.
    Regards,
    Mario

    Thanks for the quick and succinct reply.

Maybe you are looking for