DMS Document Distribution Problem Pls, Help Will be appreciated

When executing T-Code CVI8(Document Distribution), there is a system message that the order was successfully created. But when we looked at the distribution log using T-Code CVI9, the status of the document remains as SY and the processing of the distribution stops. We already finished the settings for document distribution and still this error persists. What could have been wrong? Pls advice.
Mail Me On:- [email protected]
Regards,
Akshit A. Patel

Hi Athol,
i have checked the workflow config accordingly,
workflow templates 20000104 and 20000137. are active.
a. 20000104 BUS1082 x 2 (Initiated and Resend)
b. 20000137 BUS1082002 x 1 (Resend)
But the Release status for these templates is NOT DEFINED, should it be RELEASED & the container tab for 20000104 shows a warning icon(Mandatary import parameter)on partial order & intial value not set & same for 20000137 shows warning icon on distribution order package & initial value not set.
what does this mean, is there any setting required for this?
2. Transaction SWU3 ensure that all has been generated (activated). Pay special attention to Maintain Runtime Environment -> Configure RFC destination.
I HAVE checked the above all are active except Configure RFC destination, what is the setting required for the same.
the 3, 4,& 5 setting what u have suggested are ok,i have checked them.
Please suggest for the 1 & 2 points.
thanks in advance.

Similar Messages

MSI GE620DX pls HELP WILL BE APPRECIATED

Help, just yesterday i got this issue with my ge620, upon startup, instead of blue light on power button, its stuck in red which is the nvidia graphics.... my lappy is overheating up[on strtup.. i already updated the bios which is the latest 10R.. any help????

Hi Athol,
i have checked the workflow config accordingly,
workflow templates 20000104 and 20000137. are active.
a. 20000104 BUS1082 x 2 (Initiated and Resend)
b. 20000137 BUS1082002 x 1 (Resend)
But the Release status for these templates is NOT DEFINED, should it be RELEASED & the container tab for 20000104 shows a warning icon(Mandatary import parameter)on partial order & intial value not set & same for 20000137 shows warning icon on distribution order package & initial value not set.
what does this mean, is there any setting required for this?
2. Transaction SWU3 ensure that all has been generated (activated). Pay special attention to Maintain Runtime Environment -> Configure RFC destination.
I HAVE checked the above all are active except Configure RFC destination, what is the setting required for the same.
the 3, 4,& 5 setting what u have suggested are ok,i have checked them.
Please suggest for the 1 & 2 points.
thanks in advance.

Urgent: Sessions problem pls help me

Hi all,
Its already late to post this problem.pls help me urgently.
I have a servlet & two jsp's. first i request servlet, it processes something and forwards request to my first jsp. In that jsp on a button click, i'm displaying a new popup by calling showModalDialog. this dialog gets data from the same servlet but it forwards to my second jsp.(second jsp can be seen in dialog)
Now if i submit form from my second(dialog) jsp, the servlet reports that session has expired. I tried a lot but invain. any one who helps me is appreciated well by all of our forum.
waiting 4 u r reply,

It could be that you have cookies turned off and you're not using URL Rewriting.
In J2EE, the first time your browser makes a request to the server, the server responds and appends a SESSION_ID parameter to the request as well as storing a cookie with the SESSION_ID.
The second time your browser makes a request, the server checks for the cookie. If it doesn't exist it checks for the parameter. If neither exist the server assumes its the first time your browser has made a request and behaves as describe in the previous paragraph.
In your case when you submit the form if you have disabled cookies and the action attribute doesn't have the SESSION_ID paramter appended to the url, the browser will assume it's a first request. The user will not be logged in, hence your session has expired error.
To fix this you need to encode the URL in your JSP. You can use the struts html:rewrite tag or the HttpServletReponse.encodeURL method, or if you're using JSP 2.0 the JSTL c:url tag.

Boot problem == pls HELP

I have use the utility disk and format the machintos drive , and use Extended (Journaled , Encrypted) , it ask me for a password (typed the password, confirmed the password - done) , after that i tried to install a fresh copy of Lion (i waited to be downloded from apple.com - done) after that it said that the fresh copy it will be installed and it will reboot by itself -> done ... from here the problem it's starting .... now my macbook air , it dosent start anymore it keep showming me, instaid of the apple sign from the start , a sign like the one from ghost busters (but without the ghost in it ) , i have tried to boot from cd , from usb , nothing dosent seams to be working.
If anyone know a solution to this problem, pls HELP! Thank you in advance...
p.s. before i had 2 hard drives that show up when i press the ALT button (machintos hd and utility drive, or something like that) now.. the only thing that it's showing me is : mac os base system , and if i try to use partition magic or something else, from a usb, it will tell me something about a bootguard , but i don't know how to insert the password.

Glad your issue is fixed. Thanks for the update!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

How to solve this problem, pls help when I try to see remote camera system from home."Dual streaming is required for HTML viewing"

How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"

I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
So far the problem with the 64 bit side of it is still to be resolved.
Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
Craig

I am unable to view flash videos from all websites except youtube after updating to Firefox 4. All help will be appreciated. Thanks in advance :)

I am unable to view flash videos from all websites except youtube after updating to Firefox 4. All help will be appreciated. Thanks in advance :)

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

I am using Mac, I have downloaded the Creative Cloud but when it comes to downloading an App, in the Apps tab a "Download Error" comes up, saying I should contact customer support. Any help will be appreciated.

I am using Mac, I have downloaded the Creative Cloud but when it comes to downloading an App, in the Apps tab a "Download Error" comes up, saying I should contact customer support. Any help will be appreciated.

sign out and then back in to your cc desktop app.
if that fails to resolve the problem, Sign in, activation, or connection errors | CS5.5 and later

I have a 5s phone. How do I download ALL of the photos from my phone? When I downloaded all of them, just the photos on Camera Roll were downloaded. The photos in the folders were still there. Any help will be appreciated. Rosemary

I have a 5s phone. How do I download ALL of the photos from my phone? When I downloaded all of them, just the photos on Camera Roll were downloaded. The photos in the folders were still there. Any help will be appreciated. Rosemary

tonefox
What about photos downloaded from emails?
Rosemary

Getting option value in jsp: Urgent help will be appreciated

Hello All,
I am working on JSP. I will grade myself as beginner in JSP.
I am trying to solve since last 2 days, I just want to display the value of option tag, and not able to get it.
<table>
<tr>
<td>
<html:select name="ActionForm" property="overage">
<%
int i;
int[] arr1=new int[200];
for (i=0;i<=100;i=i+10)
arr1=i;
%>
<html:option value="/<%=i%>/"><%= arr1%></html:option>
<%}%>
</html:select>
</td>
</tr>
</table>
Please, ignore the syntactical error.
Now in above code I want to know what is being put up as value of option tag. By value I mean , I want see <html:option ]value="/<%=i%>/> . (Data marked in bold)
Your help will be appreciated. I tried couple of things such as getParameter(), get Attribute(), getOverage(). Some of it gave me value as "//", it skips the i variable.
I want to see what is being put up in value for every iteration of loop

Yeah I know. But thnx for the response.
I also got that error solved. you know what it was because of those bckslashes. i wrote it,
<html:option value="<%=i%>"><%=arr%> instead of
<html:option value="/<%=i%>/"><%=arr[i]%>
and that worked perfectly. I wish I could have known this before. It would have saved me lot of time.

HT1277 Hi, any help will be appreciated. I use AOL for my email. I have probably getting on for 300 addresses but only 50 or so appear on my Ipad email facility......where have the others gone??

Hi, any help will be appreciated. i use AOL for my email where I have about 300 addresses shown but when I use the 'mail' function on my Ipad only a small percentage of those addresses appear..why is that and how can I get my full address book loaded?

Hi, any help will be appreciated. i use AOL for my email where I have about 300 addresses shown but when I use the 'mail' function on my Ipad only a small percentage of those addresses appear..why is that and how can I get my full address book loaded?

Was able to bluetooth one time to play scrabble on our two iPad 1's, but have not been able to do so again. Both are searchable, but are not able to find each other. Any help will be appreciated. Thanks.

Was able to bluetooth one time to play scrabble on our two iPad 1's, but have not been able to do so again. Both are searchable, but are not able to find each other. Any help will be appreciated. Thanks.

Both need to be in the lobby, and searchable at the same time. Also, if either has been paired with a keyboard or headphone since you played, go into settings, and make sure those devices are unpaired, and not interfering with the process.

HT201263 Hi I keep getting error 4005 when I attemp to restore my Ipad. Had to restore back to factory settings as my daughter changed password, forgot and I did not back up my ipad to icloud. Help will be appreciated. Kevin

Hi I keep getting error 4005 when I attemp to restore my Ipad. Had to restore back to factory settings as my daughter changed password, forgot and I did not back up my ipad to icloud. Help will be appreciated. Kevin

http://support.apple.com/kb/TS5314
https://discussions.apple.com/thread/5381335
https://discussions.apple.com/message/23609307#23609307
more
https://www.google.dk/search?q=apple+restore+error+4005&oq=apple+restore+error+4 005&aqs=chrome..69i57j69i60.7969j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

I have iphone 4 . I don't know how that happened that the normal color on all icons changed ( for example, normally green color phone icon is now purple color ) and photo pictures turned negative ( ghost-like ). Your help will be appreciated .

I have iphone 4 . I don't know how that happenned that the normal color on screen and all icons changed ( for example , normally green color phone icon became purple color ,) and photo pictures turned negative appearance ( ghost-like ) . Any idea how to fix this mishap ? Your help will be appreciated.

Hi kshieh
You can try two possible steps:-
1]Triple click the home button. You should get an accessibility menu.deselect the negative/black and white option.
2]Go to settings->General->accessibility->and deselect invert colours.
That should fix it
Rithwik

Import problem,pls help!

Hi,there,
I'm new guy here,I'v got a problem about Import in table mode,I found I can import back all records successfully, but it just appends all records into the orignal table,not overwrite
it,for example, I made a export for a table with 2 records, after then I added some records into that table,
finally I made an import for that table, I found the
total of records is not recovered to 2,but just append
the records from export file,why can't I recover it to 2
record? pls help me,thanks!

All that import does is to run a bunch of SQL statements based on the content of the export file. If you look at the export file in an editor (if its small), or through type (on Windoze) or more on *NIX you will see stuff like:
CREATE TABLE x STORAGE ( ...)
INSERT INTO x col12,col2, ...
VALUES (:b1,:b2, ...
If you give imp the paramter ignore=Y, then the error generated by the CREATE TABLE (table already exists) will be suppressed, but the ata will be inserted. Note that there are no DROP TABLE or TRUNCATE TABLE commands in the export file.
If you want to restore your database to a particular point in time using import, then you will need to manually drop or truncate the tables first. You can generate the required sql from the data dictionary. something like
SET lines 1000 pages 0 feedback off trimspool on;
SPOOL drop.sql;
SELECT 'DROP TABLE '||table_name||';'
FROM user_tables;
SPOOL OFF;
@drop.sqlHTH
John

DMS Document Distribution Problem Pls, Help Will be appreciated

Similar Messages

Maybe you are looking for