DMS error HTTP error: 411 Length Required

Hi,
I am geting following error while creating the content repository on R/3 ( ECC 5.0 ).
HTTP error: 411 Length Required
If I click on ok make I am geting next popu error as follow
HTTP error: 500 (Internal Server Error) "ContRep ZHTTP_HCP or Storage entry not defined"
As per SAP note 925327 in need to apply the kernel patch 122 our current patch level is 101.As per the note there is one short term solution i.e. use SAPHTTP. But am not geting how to do that since we dont have the much time to apply the kernel patch at this step coz our golive data is very near i.e. 23-05-2007.
So please help me.
Thanks a lot,
Harshal

Hello Harshal,
I have the same error. Did you solve your problem ?
Dimitry

Similar Messages

Invoking Xai Service from BPEL process (Error 411--Length Required)

Hi Friends,
I am trying to invoke xai inbound service webserive i.e WSDL from BPEL process, when i am testing the request i am getting the following error
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: oracle.fabric.common.FabricInvocationException: Unable to access the following endpoint(s): http://190.12.19.100:6500/spl/XAIApp/xaiserver/CMMBC
when i open the above end point url in the browser:
Error 411--Length Required
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.12 411 Length Required
The server refuses to accept the request without a defined Content- Length. The client MAY repeat the request if it adds a valid Content-Length header field containing the length of the message-body in the request message.
pls help me out
thanks and regards
sivaram
Edited by: sivaram on Apr 21, 2011 6:56 AM

Yes we have got the same error while invoking from SOAP UI.
But wsdl alone is opening through browser.
But when we try opening the endpoint url we are getting the above error.
Please help!

ADFDi Error : The remote server returned an error: (411) Length Required

JDeveloper version 11.1.2.1.0
weblogic Version 10.3.5.0
Hi All,
From ADF Desktop integration application, When the user key in username and password the system show the following error message. Please help to me how to tackle it as well as useful blogs.
Regards
KT
Error Detail:
WebException: The remote server returned an error: (411) Length Required.
Source: System
Stack:
at System.Net.HttpWebRequest.GetResponse()
at oracle.adf.client.windows.common.internet.http.ManagedHttpResponse..ctor(HttpWebRequest request)
at oracle.adf.client.windows.common.internet.http.ManagedHttpRequest.GetResponse()
at oracle.adf.client.windows.datamanager.servletrequest.SyncRequest.BeginResponse()
at oracle.adf.client.windows.datamanager.servletrequest.TamperCheckRequest.InternalCallSyncServlet()
at oracle.adf.client.windows.datamanager.servletrequest.SyncServletRequest.CallSyncServlet(Boolean retry)
at oracle.adf.client.windows.datamanager.ADFBindingContext.SendSyncServletRequest(SyncServletRequest request)
at oracle.adf.client.windows.datamanager.ADFBindingContext.CheckForTampering()
at oracle.adf.client.windows.datamanager.ADFBindingContext.PreSyncServletTamperCheck()
at oracle.adf.client.windows.datamanager.ADFBindingContext.SyncModel(BindingContainer bc, String contentType)
at oracle.adf.client.windows.datamanager.BindingContainer.Repopulate()
at oracle.adf.client.windows.datamanager.BindingContainer.SyncModel(Boolean forceSync)
at oracle.adf.client.windows.excel.runtime.uicomponent.RTActionCollection.DoInvoke(RTColumnCollection parent, String contextLabel)

In which environment is your application hosted? Are there any other network components sitting between the client and the application, such as CDN or load balancer?
It would be very helpful if you can capture the client-side HTTP traffic using some tools (e.g. Fiddler - http://www.fiddler2.com/fiddler2/), so that we can know where the "401 length required" error is sent from by looking at the header of the HTTP response of the error.

HTTP Error 411 "Length Required" when I try to call a service via POST

Hi All,
I've got a service I want to call from within Flex, and I used the Data/Services tab to setup the new service call. It's called "CommitChanges" and it's supposed to cause the server to commit the changes that were submitted, incrementally, during this session. You can think of it as being like a "save" command. It takes no arguments.
In keeping with the suggested use of POST for operations that causes changes to data on the server, I setup this request to use POST. However, when I try to call the service I get the following error:
Response Received:
Length Required
HTTP Error 411. The request must be chunked or have a content length.
If I change the request type to GET it works, but I'd like to get it working with POST.
-Josh

Right after Skype crash open Windows Event Viewer -> Custom Views -> Administrative Events. Look for the most recent error messages. Copy and paste here the text from the General tab.

LSO Content Player Error - HTTP Error 404 - File or directory not found

Hi All
Please could you assist.
I have published a course to my ISS CMS and configured the links in both ECC and J2EE lsm/mediator.
Result
Username='username', SystemName='HRD', Client='030', Host='22.22.22.22', Language='EN', SystemNumber='00', EnablePoolSharing='true', MaxConnection=50, AbapDebug=false:
CPCFG.RSURL = http://iiscmshost.domain/LSO600/Content/
CPCFG.REPUS = username
ServerURL=http://iiscmshost.domain/LSO600/Content/ ok!
I was able to successfully publish the course from the Authoring Environment to the CMS server.
When selecting the starting the course from the portal with content player i get the following error.
HTTP Error 404 - File or directory not found
But the URL is referring to - http://iiscmshost.domain/lms/mediator/courseview?sid=8685627505550088697845288091101&language=EN&sys=HRD&client=030&sap-accessibility=X
How does directory http://iiscmshost.domain/lms/mediator get created when the content is in http://iiscmshost.domain/LSO600/Content ??
Secondly can I change this reference to my LSO600/Content directory.
Please advise with any information. Point will be awarded.
Regards
Maahir

Dear Maahir,
We are facing the same problem. We are pointing over CMS to IIS, instead of KM content of portal. We are successfully able to release and publish the course, then attach to a course participant also.
But. When participants logs into the portal and click on Start Now. It giving 404 file not found Error. Its the same error. All our Course and content pointed to CMS IIS Server Url.
When we did the content player config test, result is NOT OK. We have required R3 authorization and CMS user authorization also with admin rights. Content Player console is working in AE when we start up the course. Its showing the error.
So, it seems like content player is not working properly. Bcoz we are launching course from http://WEBDAV repository server maintained in back end system. Which is the IIS(CMS Server)for us. Do we need to maintain anything separately to launch a course from IIS Server on R3 and SAP Portal. Below sample URL from page.
http://Sever:port/lms/mediator/courseview = xxxxxxxxxxxxxxx
Could you please us know, how did you resolve the issue and tell me the cause of this issue.
Thanks and Regards
Obli

E Filing GB out going process error HTTP error 500 internal server error

Hi Gurus,
I am getting the following error in the MONI of PI system.
Its a synchonous scenario from SAP ECC6 PROXY to SAP PI 7 to HTTP Type G.
Request Trace error : Internal Server Error
RESPONCE Error Message : HTTP server code 500 reason Internal Server Error explanation
Also I am getting the the same error while testing connection test in SM59 RFC destination type G.
Status HTTP Response     500
Status Text                     Internal Server Error
Duration Test Call                      8 ms
Regards
Sreeni

Hi Kancham,
Please check the RFC destination type G created in SM59 is correct or not .
Logon procedure
if you are using
No logon. The server program does not require you to enter a user and password.
Basic Authentication. The server program requires you to enter a user and password.
Check user name ,password is correct in RFC destination if the external HTTP server requires user credentials.
Without successfully running this RFC , you are not able communicate with the external HTTP server (Target system).
Also check that your HTTP server is running fine bcoz if it's down that also could be the reason for your problem.
regards
Ashwin
Edited by: ashwin dhakne on Mar 9, 2009 1:06 AM
Edited by: ashwin dhakne on Mar 9, 2009 1:08 AM

SOAP Receiver Error: HTTP Error response for SOAP Request

Hi gurus,
I'm facing a weird error in File --> PI 7.31 java only --> soap receiver proxy.
The other interfaces runs well. just one get the the following error:
Exception caught by adapter framework: java.io.IOException: Error receiving or parsing request message: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.
I check the payload and test in the inbound proxy. on error.
Any hints?
Thanks a lot!
regards
Christine

Hello Christine,
I faced the same issue,
You can use the beans below to overcome the error.
And charset should be utf-8

Archive link error:HTTP error: 401 Unauthorized

Hi all,
I am getting "HTTP error: 401 Unauthorized" error while uploading pdf via archive link store business document
from front end.
Any solution
Regards
Abhijit

Abhijit,
Check that the OS user that is used to run the web application has read/write permissions for the both the "installation path" and the "repository path" - for UNIX its the Apache user id and for Windows its the user that started the IIS service.
This may resolve your issue.
-Srini

AdControl error: HTTP error status code: NotFound (404)

For over a week now, a Silverlight WP 8 app with an AdControl configured for "test_client" continues to report this error and thus no bing ad visible either while running from an emulator (8.1 512) or from a WP 8 device. If I change the AdUnit
to use a PubCenter ID it works fine on the device and ads are displayed. The emulator connects to the Internet just fine via IE.
Could the ad server not be responding to the "test_client"?
Could someone let me know if it has worked recently for them? I tried contacting MS and no one seems to have an app configured with the test ad... I could give MS so many helpful suggestions. But looking at the hundreds of un-answered posts here - I
suppose they're busy with Windows 10...and have they asked developers if they're willing to put up everything on the cloud? all the while people still waiting to see the 'start' button on Windows 9?
here's the trace
Ad Err: NetworkConnectionFailure,Microsoft.Advertising.Shared.AdException: HTTP error status code: NotFound (404) ---> System.Net.WebException: The remote server returned an error: NotFound. ---> System.Net.WebException: The remote server returned
an error: NotFound.
 at System.Net.Browser.ClientHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
 at System.Net.Browser.ClientHttpWebRequest.<>c__DisplayClasse.<EndGetResponse>b__d(Object sendState)
 at System.Net.Browser.AsyncHelper.<>c__DisplayClass1.<BeginOnUI>b__0(Object sendState)
 --- End of inner exception stack trace ---
 at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
 at System.Net.Browser.ClientHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
 at Microsoft.Advertising.Shared.HttpRequest.EndGetResponse(IAsyncResult asyncResult)
 at Microsoft.Advertising.Shared.WebRequestWrapper.WebRespCallback(IAsyncResult result)
 --- End of inner exception stack trace ---
I do love Windows - don't get me wrong - I'll check my 2nd dev system soon.

Hi Ravi,
Reward points if this helps
The J2EE server might be overburdened and cannot accept the call. The 'Receive'servlet is not called. You will find further details on the HTTP status code definitions under "http://www.w3.org". Check the accessibility of the server by calling: http://<hostname>:<port>/MessagingSystem/receive/AFW/XI.
The Listener Beans of the affected connection (AFW, Marketplace, BC,see above) were not registered or the log-specific Event Handler was not found.
Check out this trouble shooting guide for SAP XI...Section 7.4.4.4 talks about exactly the same problem:-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Reward points if this helps
Regards
Pragathi.

Blackberry stimulater error : Http Error 503:Service Unavilable

Hi mobile Guru's,
i have developed a webdynpro java application in CE7.1. and i tryed to run the application in Blackberry stimulater 1.4.7.
But i am getting the following .
1.Http Error 503:Service Unavilable(The Server is currently unable tohandle your request due to temprory overload or maintanance of the server.)
2 Network error(tcp_error)
Regards,
Vivek
Basis Admin

Hi,
You need to start the MDS simulator if you want to communicate with the simulator (handheld).
Regards,
Pierre

I get the error: HTTP Error 400. The request is badly formed.

I am running Windows XP Professional. This seems to happen on most websites with the exception of search engines and Firefox Support sites.

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now" 
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies" 
 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

What about http-forbidden, http-length required Errors?

hi,
My j2me Http based application works fine on Sony Ericssion Z550i,Nokia E-62 and Nokia 6030 but when deployed over Nokia 6233 gives "http forbidden" and "Length required" error?
Where I m wrong or j2me application may not run on all java phones?

hi,
My j2me Http based application works fine on Sony Ericssion Z550i,Nokia E-62 and Nokia 6030 but when deployed over Nokia 6233 gives "http forbidden" and "Length required" error?
Where I m wrong or j2me application may not run on all java phones?

HTTP Error 403.16 - Forbidden, Your client certificate is either not trusted or is invalid.

Dear Experts,
I have tried mutual authentication with sample website as per below link:
http://itq.nl/testing-with-client-certificate-authentication-in-a-development-environment-on-iis-8-5/#comment-19427
1. Created a Root certificate, client and server certificate based on this root certificate by using Makecert command as per below link:
2. Import these certificates in Trusted Root Certification authority of both the stores (Local and Current user)
3. Created a sample website with HTML page
4.Hosted this website in IIS with HTTPS binding and selected the above server certifcate
5. Enabled "Require SSL" and selected "Require" under SSL settings of website
6. Exported the client certificate in base64 format --> Edited in notepad --> made the key into single line
7. Placed the above key under Configuration editor --> system.webServer/security/authentication/iisClientCertificateMappingAuthentication --> one to one mapping with user credentials.
8. I tried to access the website
But, I ended with below error :(
HTTP Error 403.16 - Forbidden
Your client certificate is either not trusted or is invalid.
Detailed Error Information:
Module    IIS Web Core
Notification    BeginRequest
Handler    ExtensionlessUrlHandler-Integrated-4.0
Error Code    0x800b0109
Requested URL    https://localhost:443/
Physical Path    E:\SampleRoot
Logon Method    Not yet determined
Logon User    Not yet determined
Could you please let me know what I missed here.
Note:
I am using windows8, IIS8.0.
Thanks in advance.
Regards,
M. Prasad Reddy.

Hi Prasad,
As per this case, I have been shared the corresponding details below
1.First of all,make sure that you import the certificate whether it belongs to Trusted RootCertification or not .
    If that is the case ,Goto Microsoft Management Console (MMC), open the Certificates snap-in.
    For instance, the certificate store that WCF is configured to retrieve X.509 certificates from, select the Trusted RootCertification Authoritiesfolder. Under the Trusted Root Certification Authorities folder, right-click the Certificatesfolder,
point to All Tasks, and then click Import.
2.you configured the server certificate as well, But check the client certificate whether have root certificate or not by following command?
makecert -pe -n "CN=SSLClientAuthClient"
         -eku 1.3.6.1.5.5.7.3.2 -is root -ir localmachine -in WebSSLTestRoot
         -ss my -sr currentuser -len 2048
3. Also check the Service Certificate whether its configured on the WCF Service side
4.Make sure that you followed all the steps are done correctly from your given referred link below
http://itq.nl/testing-with-client-certificate-authentication-in-a-development-environment-on-iis-8-5/#comment-19427
5.Besides, please try to set the require SSL as ignore to see if you can access the website.
If the above details cannot able to resolve this issue, please post your config file here.

HTTP Error 405 - The HTTP verb used to access this page is not .....

Goodmorning,
I've installed BO XI R3 SP4 on a 2k3-server with IIS 6.0. I wanted to configurate the SSO. After changing the web.config file and restart of the IIS , I get the following error :
HTTP Error 405 - The HTTP verb used to access this page is not allowed.
Internet Information Services (IIS)
The frame where you normally are using for authentication has this error, the frame around is normal.
Hope someony can help, thx in advance

I can't fin a upload button , so the file in plain text gepasted
Hope it is readable :
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2012-02-29 12:19:21
#Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/logon.aspx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/res/schema.blue/default.css.ashx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/js/utils.js.ashx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/js/helpSystem.js.ashx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/common/appService.aspx service=skinning&resource=img&img=img.banner.logon.pattern 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/listing/blank.aspx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/common/appService.aspx service=skinning&resource=img&img=img.banner.logo 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/logon/logon.aspx parameter=logonService 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 POST /PlatformServices/Shared/Logon/Logon.aspx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 405 0 1
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/logon.aspx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/res/schema.blue/default.css.ashx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/js/utils.js.ashx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/js/helpSystem.js.ashx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/listing/blank.aspx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/common/appService.aspx service=skinning&resource=img&img=img.banner.logon.pattern 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/common/appService.aspx service=skinning&resource=img&img=img.banner.logo 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/logon/logon.aspx parameter=logonService 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 POST /PlatformServices/Shared/Logon/Logon.aspx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 405 0 1
2012-02-29 12:33:17 W3SVC1 10.13.0.119 OPTIONS /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 200 0 0
2012-02-29 12:33:17 W3SVC1 10.13.0.119 PROPFIND /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 501 0 0
2012-02-29 12:33:17 W3SVC1 10.13.0.119 PROPFIND /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 501 0 0
2012-02-29 12:33:17 W3SVC1 10.13.0.119 PROPFIND /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 501 0 0
2012-02-29 12:33:17 W3SVC1 10.13.0.119 PROPFIND /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 501 0 0
Thx in advance for your reply

HTTP Error 404 :File does not exist

Hi all,
On Test instance we are not able to open the help file,it give an error
HTTP Error 404 :File does not exist
can anybody have solution for this
it's very urgent
Thanks
shekhar

I have changed the note server definition in the external app to add the mail directory in front of the mail file name 'mail/mufile.nfs' and I get the following error:
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: LotusServiceSession: getConfigProperties(): An error occured
while reading/ retrieving the properties from the the configuration file.
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: Unhandled exception in SOAP call
oracle.portal.provider.v2.ProviderException: LotusServiceSession: getConfigProperties(): An error occured while reading/ retrieving the
properties from the the configuration file.

DMS error HTTP error: 411 Length Required

Similar Messages

Maybe you are looking for