DMS- How to know that the documents are attached??

Hello Guys,
This is pertaining to DMS,
We attach documents and link it to various object links.
Later when we get into that transaction we retrive the attached documents.
Suppose i attached the DIR to MARA (in object links) , and until i forcely go to document data in T code MM02 i cant know that documents are attached.....??
My question is how any one will know that the documents are linked thru DMS to Various object links in those transactions.
Is my question is valid......just put your comments...
Regards,
Murali.S
Points will be awarded for sure.

Guys,
Thanks first-of all...
But i think i should be still precise little bit more....
Just consider a situation where u have 2 users ....A & B,both are in different location.just imagine user B dont have any contact to(from) User A
User A: creates the various document info record and attach to Material master .
User B is working in another plant . How user B will know that to this material documents are attached,
He(USER B) should have already got the information that documents are attached else he should go and check document data Tab forcing himself......
I felt that every time user has to check as a practice if any documents are attached thru Tab EXTRA'S but this may be critical...not every one will do that....some time u may forget to check the presence.
Is my question valid......??!?!?

Similar Messages

HT202731 How do i know that the fans are working on my iMac

How do i know that the fans are working on my iMac

the back of the monitor get hot and i can't hear any fans working

How do know that the battery is fully charged on ios 7

How do know that the battery is fully charged on ios 7

When you turn it on from sleep mode, below the time on the lock screen it says how much charged it is.

In standard programmes how to know where the fields are in the code...Urge.

How to find where the coding of the fields displayed in the standard transactions is written.FOr example In XD0l if I want to find out where the 'key term' is coded in the stadard programe of the transaction XD01.When I go into sytem--->status,I will get to see a window showing the details,In that we can see 3 PRAGRAMS-PROGRAM(SCREEN),PROGRAM(SUB SCREEN) AND PROGRAM (GUI).Can nay one explain the significance of these 3 programs.

Hi Henry,
I don't think this is the easiest way to look at the code around a particular field on the screen. Debugging standard programs also can be very tedious, if not impossbile. So, instead of this question, I would like to find out exactly what you want to do if you know the code.
If you are in a transaction and you want to know where the code of a particular field is, the fastest way to get to it is by pressing the F1 key on the field and then press the Technical info button on the help screen. In here you will typically see the same kind of information but it is very specific to the field you selected.
PROGRAM(SCREEN) tells you which program is manipulating the main screen, in which your field is embedded. Remember your field may be included in a sub-screen and that subscreen may be the one included in the main screen.
PROGRAM(SUB SCREEN) tells you which program is directly responsible for the field on the subscreen it is included in. This is where you should find the code most appropriate for the field, but not necessarily.
PROGRAM(GUI) controls how your push buttons and the menu options in the screen behave and controlled.
Srinivas

How to know that the user pressed the refresh button??

hi there..
how can i no that the user has pressed the browser "Refrsh" button so that i can respond with the appropriate action????
thanx..

Well, you can't know if refresh was pressed vs. hitting enter in the location bar to trigger a refresh. There isn't any simple way to know, though. Some kind of page hit counter or something, maybe.

How to ensure that the queries are in sync between Web browser and Bex

Hi All,
I am struck with this issue for more than a month. Can someone help me in understanding this and resolving? Thanx!!
"Ad hoc reports showing in web browser but not showing in BeX, if added to BeX then appearing twice on web browser"
Edited by: RAMABHOTLA SHANKER on May 21, 2009 2:09 PM

Hi,
There is no difference in queries elements between BEx and Web Browser, the adhoc queries/analysis/variants you create in web analyser doesn't get save back to BI server; its saving only in EP server.
Where as if you save any query view in BEx analyzer can also be viewed in Web analyzer, thats the reason you are able to see both of them. But actually meta data for both the query views are different.
Hope it clarifies.
Regards,
Surya.

How to know whether the changes are implemented by sap or not(not manually)

Hi,
On 4.7 version in some standard objects(SAP Objects) some changes are done by custom by using modification assistance.
On ecc 6.0 version I need to know whether the same changes are done by custom or sap? ( not manually)
Let me know is there any process to know the changes done by sap or custom on ecc 6.0.
Thanks,
Radhika

Hi ,
u can check for entries in table ADIRACCESS.
Regards
prabhu

How to confirm that the chains are de-schedule?

Hi Moderators & Experts,
Is there any way to view/find/identify that the chains have been stopped or de-scheduled??
like any Table or monitor screen with red or green signals.
For ex : i have 30 chains and due to outrage i have De-scheduled all the chains using the "Remove from schedule " option from scheduler menu,just to re-confirm is their any table or monitor to identify that the changes have been done correctly and no chain is left while performing the activity.
Any inputs appreciated.
Thanks
Aamer

Hi Aamer,
in SM37 if you see any "BI_PROCESS_TRIGGER" scheduled then there are process chains that are still scheduled.
Good luck,
Vijay.

How tyo know that primary & standby are syncronyzed(SCN)

Dears,,
If i have data guard solution (Primary and physical standby) databases
How to make sure that both primary & standby are syncronyzed(SCN)
Please,help,,

Hi,
Compared across the sequences applied on standby with primary archive logs generation generation
select max(sequence#) from v$archived_log where applied='YES';
- Pavan Kumar N

How to know that the captured audio data is silence?

Hi,
I try to distinguish whether or the Microphone is silence. The audio data is captured as the following code: So how can I figure out whether it is silence or not silence?
TargetDataLine mic =null ;
byte[] buffer = new byte[8192];
AudioFormat audioFormat = new AudioFormat(AudioFormat.Encoding.PCM_SIGNED, 8000.0F, 16, 1, 2, 8000.0F, true);
try {
DataLine.Info targetInfo = new DataLine.Info(TargetDataLine.class, audioFormat);
mic = (TargetDataLine) AudioSystem.getLine(targetInfo);
mic.open(audioFormat, 8192);
catch (LineUnavailableException e) {
e.printStackTrace();
mic.start();
mic.read(buffer, 0, 8192);

hi ,
did u got the solution of it,
i am facing same problem????????????
ur duidance will help me lot.
thx in advance

How to know that the purchase order link to which inbound delivery ?

Dear Support ,
I am looking for one way which can check which purchase order ( only for trading goods ) link to which inbound delivery ....
Now my way is use the purchase order number as a condiction to check in LIPS table , but i think this is a stupid way , right ?
In fact , i am writing one report which can show all the Open Purchase Order ( Only for trading goods and already created the inbound delivery & shipment costs ) which can do the MIGO without the problems ....
Has any way to check it ?
Many thanks .....
Best Regards
Carlos

PO and inbound delivery link.
In PO item , Conformation Tab : conf ctrl. if its is active U can GR with inbound delivery only (VL31N)
and not with MIGO.
rep
VL06I - Inbound Delivery Monitor
V_UC_7 - Incomplete Inbound Deliveries
VL06I Inbound Delivery Monitor
VL06IC Confirmation of putaway inb. deliv.
VL06ID Inbound Deliveries for Distribution
VL06IF Selection inbound deliveries
VL06IG Inbound deliveries for goods receip
VL06IP Inbound deliveries for putaway.
Go to --Information systems > General report selection > Logistics execution > shipping
REWGDS

How to know VAT cleared documents?

HI,
After receiving AR/AP for that period, I will clear VAT for some documents for that month, then how to know that which documents are VAT cleared and which are yet to be cleared. I want to create a report for the above requirement.
So in which table, I find that, documents cleared with VAT and documents are not cleared with VAT, any one help me on this?
regards
Niv

Hi,
Tcode : FBL3N
Enter the GL Account of VAT and Check All Items (third option) Execute and you will have the cleared and open item of VAT.
Regards.

How adutilities comes to know that the file system is shared file system

How adutilities comes to know that the file system is shared file system ?
In multinode shared file system : if we want genearte message file we can invoke adadmin from any node and perform this activity. In this case, how adadmin knows that the filesystem is shared filesystem.

Duplicate post.
How adutilities comes to know that the file system is shared file system
How adutilities comes to know that the file system is shared file system

How to come to know that the BEx queries created in whether in 3.X or 7.X

Hi Friends,
How to come to know that the BEx queries created whether in 3.X or 7.X.
Some queries created in 3.X and some in 7.X in my system. How to know that the query created in which version. Where we can find such information.
It might be smaal isue for you. I searched the form but i haven't got information which i am looking for.
Thanks &Regards,
Revathi

Hi Revathi,
Just check if the below can help you.
You can use table RSZCOMPDIR
Enter Query Technical Name in field COMPID
Field VERSION in the Table RSZCOMPDIR can tell you the version.
if the value is below 100 then Query is in 3.x versionu2026
If Greater Than 100 means, it is already Migrated to higher version which is 7.X
Hope it helps,
Manish Sharma

How to know that item is serially controlled or not ?

Hi,
How to know that the ordered item is serially controlled or not ?
In which tables we have refere to know that ?
Thanks

--If the item is only serial number controlled and not lot number controlled
select serial_number from mtl_unit_transactions a, mtl_material_transactions b, wsh_delivery_details c
where a.transaction_id=b.transaction_id
and b.trx_source_line_id=c.source_line_id
and c.source_header_number=&order_number
and b.transaction_type_id=33 --34 if it is internal order shipments
OR (If it is lot and serial number controlled)
select serial_number from mtl_unit_transactions a, mtl_material_transactions b, wsh_delivery_details c, mtl_transaction_lot_numbers d
where b.transaction_id=d.transaction_id
and a.transaction_id=d.serial_transaction_id
and b.trx_source_line_id=c.source_line_id
and c.source_header_number=&order_number
and b.transaction_type_id=33 --34 if it is internal order shipments
Thanks
Nagamohan

DMS- How to know that the documents are attached??

Similar Messages

Maybe you are looking for