DMS-Object link to business partner (ISU-Module) required. Plz help.

Hi all,
I require to give an object link from DMS to Business partner of ISU module t code BP.
So checked up in SPRO- Control data- maintain key feilds, & i found that BUT001 is the transparent table which is used here. so i inserted the same in object link for my document type, but there was no screen no defined to it so i gave the screen no as 500, the tab has appeared under the objectlink tab in DIR, but the screen is not appearing, it is blank, also in the business partner Transaction the DIR table is not appearing.
What should i do? is there any other setting required, or the table which i have found is wrong. Plz help.
Regards
Tushar.

Hi,
Have you solved your issue? I want to have the same link. If you have please give me a step by step description.
I saw the screen number for general business partner is 1249, maybe you can use this.
Regards Camilla

Similar Messages

  • BP change documents ( linking problem between Object id and Business Partner)

    Hi,
    We need to create a report for documents changed for a Business partner.
    This will be done in sap bw.
    on source side I have created the datasource with function module changedocument_read and I am getting most of the information
    which I want. Only missing part is Business Partner number.
    Can somebody suggest , how I would be able to link Object Id to business partner.
    I need to pull everything that is changed at BP level and the Object class selection around 30 in number.
    So I am looking for any standard function module which can provide me the link between Object id and Business partner.
    If I establish the rules to determine the Business partner from Object id , its getting bit difficult.
    Can somebody please help/suggest.
    I have gone through many documents and scn posts but unable to find anything on this.
    Thanks !

    Hi, looking at the change history header table CDHDR it seems that object ID simple equals the internal format of the business partner number.

  • Adding additional sap object BUT000 in dms object link.

    Hi Experts,
    My requirement is adding business partner (SAP object BUT000 ) in DMS object link.
    BUT000 is not present as standard sap object list in object linking.
    I have gone through SAP documentation and understood following things.
    1) Program two screens for the following module pools for the SAP object that is to be linked additionally:
         u2013 SAPLCV00
         u2013 SAPLCVIN
    question start: Does this means add one screen lets say screen 5000 to function pool  SAPLCV00 and
                            add one screen 5000 to function pool SAPLCVIN with SAP access key.
    question end:
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    question start: Does this means simply copy PBO and PAI of screen 0204 and put it in screen 5000.
    question end:
    Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    question start: does this means create FM OBJECT_CHECK_BUT000 in my case.
    question end:
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    question start: does this means if FM OBJECT_CHECK_BUT000 does not exist in SAP system create it by copying
                            FM OBJECT_CHECK_EQUI.
                            Is it ok if I keep the logic of FM OBJECT_CHECK_EQUI as it is.
    question end:

    Hi Sunil,
    For adding new object first maintain this object in key fields in spro.
    You need to add the DMS sceen to the perticular object sceen with screen exit.
    The object sholud reflect in DMS and DMS screen should reflect in object t-code.
    Check in SE80 if there is no screen exit available for the object ,need enhancement.
    I hope this will help you much.
    Regards,
    Ravindra

  • DMS Object Link for SRM

    Dear All,
    Can you please provide me the object link for SRM( Inbound Delivery).
    Our team requirenment we should need to integrate with SRM through DMS (object link)
    So provide me the solution?
    Thanks
    Edited by: RS on Aug 26, 2010 1:14 PM

    Hi RS,
    Kindly follow following steps. Add the new object in DMS object link and DMS screen on new object screen with help of Abap'r.
    This can be achived with help of Abap'r and following steps:
    Purpose
    You can also link documents with SAP objects for which no linking is supported in the standard SAP System.
    Prerequisites
    In Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data  Maintain key fields.
    Process
    1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2. Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    Result
    After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see: Object Links).
    Regards,
    Ravindra

  • Add New Object in a DMS Object Link

    Hi everybody,
    i am trying to create an object link to Service Entry Sheet.  (tcode: ML81N, ESSR-LBLNI)
    by sap instructions i did this step:
    "You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
    The processing logic must follow that of screen 1204 in program SAPLVC130."
    and this step:
    Create function module OBJECT_CHECK_XXXX (XXXX = ESSR ) which i have copied from OBJECT_CHECK_EQUI .
    I have done above step .
    I created Screen For SAPLCV130 and SAPLCV140 with screen No 1272. give same flow logic of screen 1204.
    I created Function Module OBJECT_CHECK_ESSR.
    After this What I have to do for displaying  ESSR object in DMS as Object Link. 
    Please Guide me as soon as possible.
    Thanks
    Pranesh

    Hi,
    Since I think you already followed the below steps :
    1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
    You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
    2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists .
    Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
    Kindly go through the below once :
    Link :[http://help.sap.com/erp2005_ehp_02/helpdata/en/2c/3fe93bad3ce333e10000000a114084/frameset.htm].
    you define the object link in DMS customizing
    e.g.For EBAN maintain screen number 247 in "Maintain view for screens to DMS object links" Then link EBAN to your document type
    Hope it helps you.
    Thanks
    Arbind
    Edited by: Arbind Prasad on Feb 24, 2011 5:46 PM

  • DMS Object Link at Maintenence Order and Service order level

    Hi SAP Gurus,
    We had a requirement for maintaining DMS Object at Service order and maintenence order level, as Standard DMS does not provide any Standard Object link at Order level, we went for development and following the Standard procedure i could bring the Order Tab in CV01N Object Links, and also i could search the relavent maintenence order and maintain documents relevant to it,
    But the biggest problem now is i could not create DIR from the Maintenence or service order screen IW31, and the document i have placed at the order is not visible in the order screen at all,
    i know it is some sort of enhancement in the Order screen to allow DMS Documents to appear in the Order screen to provide this funtionality.
    let me pls know what exactly has to be done, as there is no config at the order level to get the DMS Screen, as DMS is not a standard object at the order level.
    one approch as suggested is modifiying the Order screen or using Screen Exit Enhancement for Order but not sure which one to use or how to move ahead,
    Thanks n Regards
    Priya S

    Dear Christoph Hopf
    Many Thanks for your answer,
    i went through the said SAP Note, but it only speaks about the notifications level, where SAP itself has provided the standard DMS Object links, and iam in latest ECC-6 version where this note  is taken care of i think,
    iam looking for creating DMS Document (DIR) from the maintenence Order IW31 transaction screen, and have developed new Object link for Maintenence order,
    but the main problem is, iam not able to create DIR from the IW31 Screen directly as Maintennce order is not a standard SAP Object,
    please let me know how to get the list of documents that i have attached to a maintenence order to appear in the IW32 maintenence order screen, and also we need to create the documents (DIR) directly from IW31 / 32 screens.
    Thanks and Regards,
    PriyaS
    Edited by: Priya S on Aug 19, 2009 1:50 AM
    Edited by: Priya S on Aug 20, 2009 1:54 AM
    Edited by: Priya S on Aug 24, 2009 6:24 PM

  • How to link the Business Partner with the SAP User ID.

    Hi,
    We are working on a scenario wherein the resources are created as Business Partners in R/3.
    now How to link the Business Partner with the SAP User ID.

    HI AP,
    Maintain the business partner in role Internet User - BUP005.
    Now assign the existing user to this BP .(you can make this assignment in tab "internet user'. Just enter the user name in the field User and save).
    You can now see the link in table HRP1001.
    Cheers,
    Rishu.

  • DMS object links to SRM

    Hi,
    You can used this method to create object links between DMS different ECC objects (See below) Is there anybody who can tell me if you can use the same method to create object links between DMS and SRM objects? It should be very helpful for me.
    Thanks in advance
    //Håkan
    Adding Other Objects
    Purpose
    You can also link documents with SAP objects for which no linking is supported in the standard
    SAP System.
    Prerequisites
    In Customizing for the Do
    cument Management ,SAP objects that you want to link to document info records, by choosing Control Data ® Maintain key fields.
    Process
    Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    Create the function moduleOBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    Result
    After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see:
    Object Links).

    Hey Manghes,
    The business scenarie is that poeple working in only SRM not in ECC system at all and they want easyly reach or link some document in DMS to SRM objects by using object links.
    BR
    //Håkan

  • DMS object link to MIGO tcode - attach to GRN

    Hi,
    Our scenario requires us to link documents with specific GRN number via MIGO tcode. This is a non-std object and the logic
    1.Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN.......
    is not helpful at all and incomplete.
    Could anyone please let know what needs to be done from GRN object side to enable documents to be attacvhed.
    Archivelink is not an option because several documents need to follow life ctycle and versioninG.

    Hello,
    It is a two step process:
    1. Screen activation in SAP DMS
    2. Screen activation in SAP Object
    Please follow below steps:
    1. Configuration of screens as per SAP suggestion & Maintenance of Standard Structure MCDOKOB
    Material document number filed MBLNR need to be included in the standard structure.
    2. For t code MIGO, following function module needs to be maintained - OBJECT_CHECK_MSEG
    3. Maintenance Key Fields
    MSEG MIGO MBLNR MBN
    4. Maintain Object link
    MSEG Material Document Screen Number (enter the screen number which you have configured)
    Use the above created object link in your document type.
    5. Implementation of BADI - MB_MIGO_BADI, this is to activate the sceen of documents in MIGO
    I have not done this. So it is possible that i would have missed some step.
    But I am sure, it will help you a lot.
    Thanks & Regards,
    Mihir Popat

  • Add ESSR Object in a DMS Object Link

    Hi everybody,
    i am trying to create an object link to Service Entry Sheet. (tcode: ML81N, ESSR-LBLNI)
    by sap instructions i did this step:
    "You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
    The processing logic must follow that of screen 1204 in program SAPLVC130."
    and this step:
    Create function module OBJECT_CHECK_XXXX (XXXX = ESSR ) which i have copied from OBJECT_CHECK_EQUI .
    I have done above step .
    I created Screen For SAPLCV130 and SAPLCV140 with screen No 1272. give same flow logic of screen 1204.
    I created Function Module OBJECT_CHECK_ESSR.
    After this What I have to do for displaying ESSR object in DMS as Object Link.
    Please Guide me as soon as possible.
    Thanks
    Pranesh

    Hey Pranesh
    Go to IMG -> Cross-Application Components -> Document Management ->  Control Data -> Maintain Screen for Object Link
    Add the SAP objec and Screen
    Go to IMG -> Cross-Application Components -> Document Management ->  Control Data -> Define Document Types
    Choose the document type you want to add the object link
    Define object link
    and add object and screen number
    BR/Håkan

  • SD customer creation in background when Business Partner (ISU) is created

    Hi,
    In ISU, when Business Partner is created via FPP1, it creates a SD customer in the background once required settings are maintained.
    I have observed that the name field passed in Customer is a combination of various name fields (such as: first name, last name, affixe, name supplement etc.) maintained in BP.
    The requirement is that only first and last name shall be passed in customer's name field.
    Please let me know how we can control this. Also share the information on how Customer creation is triggered (via Event/function module/work flow etc.) in the process of BP creation.
    Thanks in advance.
    Best Regards,
    Vandana

    Vandana,
    I assume that you know that the business partner (and also contract account) are implement by the means of BDT (business data toolset). The task menu of the business partner can be displayed with BUDT. The option 'business partner' -> 'control' -> 'Events' -> BUS7 (business data toolset) shows the define events that are processed during the processing of a business partner.
    At event DSAVC the SD customer is retrieved by means of muster_kun (function module ISU_BUPA_EVENT_DSAVC). In the exit  EXIT_SAPLES03_001 you should be in the position to change the data in the SD customer as you need it.
    Kind regards,
    Fritz

  • Linking a Business partner to Territory ID

    Hi Experts,
    <b>By Programming i should link business partners (Role Employee) to the Territory ID,</b> when i am using a BAPI Function Module <b>'BAPI_TERRITORY_CHANGE'</b> i am getting an error <b>'Position is not define'</b>. How to rectify the error? Or is there any Function Module or Classes which satisfies over requirement.
    Thanks & Regards,
    Venkatesh Panguluru

    Hi Stephen,
    You can do the same in transaction BP.
    Select Business Partner with Employee Role --> Goto Identification tab.
    There you can maintain the PERNR and SY-UNAME.
    Let me know if this helps.
    Regards,
    Vivek Pandey

  • Creation of Interaction object programatically for Business partner

    Hello,
    How to create Interaction object ( BUS20004  )programatically for  Business partner ? If anybody worked on it , plz let me know how we can create it for BP.
    BOR object for InteractionObject is: BUS20004 Interaction Object
    Regards
    Sandeep

    Dear Sandeep,
    Please use FMs CRM_ORDER_MAINTAIN and CRM_ORDER_SAVE to create Interaction Record using the program.
    Thanks
    Vishal

  • RE-FX :- Linking of Business partner to customer for rental Agreement

    While linking BP to Customer it is giving the following error:-
    Business partner cannot be assigned to customer

    In ECC partner functions are used when you have multiple addresses for the same customer.  The partner function links those address records together.  You could have multiple unique customer numbers on the KNA1 table, but in the KNVVP table (partner functions) you maintain the linkage between the main table records. 
    Partner functions are not recommended in MDM.  These are generally not considered to be "enterprise level attributes" and therefore shouldn't reside in your customer repository in a central create scenario.  Additionally, some of the complexity required to model partner functions can't be modeled in MDM at this time.  When 7.1 comes out, there is a new data type called "tuples" which supports deeply nested structures, and therefore you could model a true partner function table inside the sales area table.

  • DMS Object link for PRT Couldnot Display in CV02N

    Hi PLM DMS Gurus ,
    I have been investigating adding an object link for PRT which is CRVS_B screen 214. I have added this to the one document type. However, when I attempt to see the object link from the CV02N transaction, it does not appear to recognize the PRT assignment from the IA06 Change General Task List PRT Overview screen. Do any one have any idea of why this may be behaving in this way? Any feedback you can provide will be appreciated.
    When I add the Documents through transaction CF02/01 then it is showing in the CV02N transaction Object link , But if I attach the same Document# through IA06 then it is not showing it.
    steps to attach the document .
    1. Go to IA06 select a group
    2. Double click the task list and create an Operation
    3. Choose the Operation and click into the PRT button in the bottom of the screen.
    4 . Here you can find an option to attach your Document .
    5. Once you attach note down the document number and goto CV02N and see the object Link . You will not find that .
    I am doubted whether I am using the right screen number or not (CRVS_B screen 214) . Do we have any other way or anyother program & screen to show the Object link to the PRT created through IA06 .
    How do we find the program and screen which is not listed in the developement class CV ?.
    Any Inputs are highly appreciable and rewardable.
    Thanks & regards,
    Ramesh babu .P

    What you do in IA06 is using a document as an PRT. This is not the same as a objectlink between a PRT and a document. Thats why you dont see the use of the document in a tasklist in CV02n.
    Regards,
    Robert

Maybe you are looking for