DMS: Object Links for Work Order

Hello All,
I would like to attach and checkin originals to a work order thru CV01N/CV02N transaction. But, there is no specific tab for work oder. How do I acheive this?
what configuaration and development has to be done?
Any kind of help is highly appreciated.
Thanks,
Chandra

Hi,
If you need only a tab to be seen in the CV01N/CV02N Tcodes, then there is a config settings,
Document Mangement--> Control Data->Define Document Types (under that select your document type to which this attachment is required) > Define object links> select the production order (PORDER---Object & Screen # 0251)
then you can see the production order tab in the DIR,
OR
As per my understanding of your requirement is:
When you attach a Original in DIR then it should be visible in the Production order also.
To achieve this you need to build a relation b/w Material Master & DIR (particular document type), so when a order is created then DIR with original will also get attached automatically so that you view, or through EWB also it can viewed & edited.
Hope i have understand correctly.
Regards
Rehman

Similar Messages

  • DMS Object Link at Maintenence Order and Service order level

    Hi SAP Gurus,
    We had a requirement for maintaining DMS Object at Service order and maintenence order level, as Standard DMS does not provide any Standard Object link at Order level, we went for development and following the Standard procedure i could bring the Order Tab in CV01N Object Links, and also i could search the relavent maintenence order and maintain documents relevant to it,
    But the biggest problem now is i could not create DIR from the Maintenence or service order screen IW31, and the document i have placed at the order is not visible in the order screen at all,
    i know it is some sort of enhancement in the Order screen to allow DMS Documents to appear in the Order screen to provide this funtionality.
    let me pls know what exactly has to be done, as there is no config at the order level to get the DMS Screen, as DMS is not a standard object at the order level.
    one approch as suggested is modifiying the Order screen or using Screen Exit Enhancement for Order but not sure which one to use or how to move ahead,
    Thanks n Regards
    Priya S

    Dear Christoph Hopf
    Many Thanks for your answer,
    i went through the said SAP Note, but it only speaks about the notifications level, where SAP itself has provided the standard DMS Object links, and iam in latest ECC-6 version where this note  is taken care of i think,
    iam looking for creating DMS Document (DIR) from the maintenence Order IW31 transaction screen, and have developed new Object link for Maintenence order,
    but the main problem is, iam not able to create DIR from the IW31 Screen directly as Maintennce order is not a standard SAP Object,
    please let me know how to get the list of documents that i have attached to a maintenence order to appear in the IW32 maintenence order screen, and also we need to create the documents (DIR) directly from IW31 / 32 screens.
    Thanks and Regards,
    PriyaS
    Edited by: Priya S on Aug 19, 2009 1:50 AM
    Edited by: Priya S on Aug 20, 2009 1:54 AM
    Edited by: Priya S on Aug 24, 2009 6:24 PM

  • Object link for PM order

    Dear all
    I want to add object link for PM order (Tcode-IW32) , It is not standard link. What is the process to create it?
    Regards
    Sandeep

    Hi Sandeep,
    take a look to this link:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/f8/8c423c1a7a7869e10000000a114084/frameset.htm
    Best Regards,
    Alfredo.

  • DMS Object link for PRT Couldnot Display in CV02N

    Hi PLM DMS Gurus ,
    I have been investigating adding an object link for PRT which is CRVS_B screen 214. I have added this to the one document type. However, when I attempt to see the object link from the CV02N transaction, it does not appear to recognize the PRT assignment from the IA06 Change General Task List PRT Overview screen. Do any one have any idea of why this may be behaving in this way? Any feedback you can provide will be appreciated.
    When I add the Documents through transaction CF02/01 then it is showing in the CV02N transaction Object link , But if I attach the same Document# through IA06 then it is not showing it.
    steps to attach the document .
    1. Go to IA06 select a group
    2. Double click the task list and create an Operation
    3. Choose the Operation and click into the PRT button in the bottom of the screen.
    4 . Here you can find an option to attach your Document .
    5. Once you attach note down the document number and goto CV02N and see the object Link . You will not find that .
    I am doubted whether I am using the right screen number or not (CRVS_B screen 214) . Do we have any other way or anyother program & screen to show the Object link to the PRT created through IA06 .
    How do we find the program and screen which is not listed in the developement class CV ?.
    Any Inputs are highly appreciable and rewardable.
    Thanks & regards,
    Ramesh babu .P

    What you do in IA06 is using a document as an PRT. This is not the same as a objectlink between a PRT and a document. Thats why you dont see the use of the document in a tasklist in CV02n.
    Regards,
    Robert

  • DMS Object Link for SRM

    Dear All,
    Can you please provide me the object link for SRM( Inbound Delivery).
    Our team requirenment we should need to integrate with SRM through DMS (object link)
    So provide me the solution?
    Thanks
    Edited by: RS on Aug 26, 2010 1:14 PM

    Hi RS,
    Kindly follow following steps. Add the new object in DMS object link and DMS screen on new object screen with help of Abap'r.
    This can be achived with help of Abap'r and following steps:
    Purpose
    You can also link documents with SAP objects for which no linking is supported in the standard SAP System.
    Prerequisites
    In Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data  Maintain key fields.
    Process
    1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2. Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    Result
    After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see: Object Links).
    Regards,
    Ravindra

  • In DMS,CV01N,CV02N, object link for production order is not enabeling

    Hi,
    To the Document in cv01n or cv02n, while trying to give production order in Object Link : Production order tab, The order tab is not enabling. How to enter the production order in object link and can we do this thing in change mode.
    Regards,
    Mastan.

    Hi Mastan,
    You need to enable the object PORDER and  screen number 251.This is used to transfer of Document from Material master or Bill of Material based on Production Scheduling Profile (Header material) Configuration.
    Please refer below document for more details
    http://scn.sap.com/docs/DOC-35058
    Regards,
    R.Brahmankar

  • DMS- Object links (attached Purchase Orders) not opening

    Dear all,
    I have attached some PO's in Object link of DMS document.When I go with cv03n transaction.....Those PO's were not coming to display from the DMS......Please suggest any config is missing?
    thanks............

    hello srinivas,
    Maintain T code me23n infront of EKKO in maintain key fields setting in DMS control data
    Regards
    sham

  • Creation of new object link for DMS

    i have searched a lot  about Creation of new object link for DMS on internet .
    and all replies  focus on that documentation :
    1.     Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2.     Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    i need  to know how to implement that  in more detailed step by step
    as  i know DMS and  abap also.

    Hi Reda,
    Hope the below URL will help to understand how the Process of adding a object link works.
    Enhancement Without Modification of the Object Links - Engineering Change Management (LO-ECH) - SAP Library
    Thanks & Regards,
    Seshadri.

  • DMS-Object link to business partner (ISU-Module) required. Plz help.

    Hi all,
    I require to give an object link from DMS to Business partner of ISU module t code BP.
    So checked up in SPRO- Control data- maintain key feilds, & i found that BUT001 is the transparent table which is used here. so i inserted the same in object link for my document type, but there was no screen no defined to it so i gave the screen no as 500, the tab has appeared under the objectlink tab in DIR, but the screen is not appearing, it is blank, also in the business partner Transaction the DIR table is not appearing.
    What should i do? is there any other setting required, or the table which i have found is wrong. Plz help.
    Regards
    Tushar.

    Hi,
    Have you solved your issue? I want to have the same link. If you have please give me a step by step description.
    I saw the screen number for general business partner is 1249, maybe you can use this.
    Regards Camilla

  • Predefined object type for Purchase order release stratergy

    dear experts,
    There are already predefined object type for purchase order like bus2012 where i can create new events and methods. I want to know is there any predefined objects for purchase order release strategy. The requirement is there i want to define method, that should display the po release screen. If i bind this method with work flow template, mail should be triggered and if i click the mail po release screen should be opened for respective material...
    regards,
    Kandhan G

    Hello
    I'm using the BUS2012 Object type in workflow task but in simulation the task run correct but in the transaction when modify a purchase orden the task send an error...
    maybe the error is similar...did you solve this problem?..
    Thanks!
    Wladimir E.
    [email protected]

  • Add New Object in a DMS Object Link

    Hi everybody,
    i am trying to create an object link to Service Entry Sheet.  (tcode: ML81N, ESSR-LBLNI)
    by sap instructions i did this step:
    "You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
    The processing logic must follow that of screen 1204 in program SAPLVC130."
    and this step:
    Create function module OBJECT_CHECK_XXXX (XXXX = ESSR ) which i have copied from OBJECT_CHECK_EQUI .
    I have done above step .
    I created Screen For SAPLCV130 and SAPLCV140 with screen No 1272. give same flow logic of screen 1204.
    I created Function Module OBJECT_CHECK_ESSR.
    After this What I have to do for displaying  ESSR object in DMS as Object Link. 
    Please Guide me as soon as possible.
    Thanks
    Pranesh

    Hi,
    Since I think you already followed the below steps :
    1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
    You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
    2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists .
    Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
    Kindly go through the below once :
    Link :[http://help.sap.com/erp2005_ehp_02/helpdata/en/2c/3fe93bad3ce333e10000000a114084/frameset.htm].
    you define the object link in DMS customizing
    e.g.For EBAN maintain screen number 247 in "Maintain view for screens to DMS object links" Then link EBAN to your document type
    Hope it helps you.
    Thanks
    Arbind
    Edited by: Arbind Prasad on Feb 24, 2011 5:46 PM

  • Adding additional sap object BUT000 in dms object link.

    Hi Experts,
    My requirement is adding business partner (SAP object BUT000 ) in DMS object link.
    BUT000 is not present as standard sap object list in object linking.
    I have gone through SAP documentation and understood following things.
    1) Program two screens for the following module pools for the SAP object that is to be linked additionally:
         u2013 SAPLCV00
         u2013 SAPLCVIN
    question start: Does this means add one screen lets say screen 5000 to function pool  SAPLCV00 and
                            add one screen 5000 to function pool SAPLCVIN with SAP access key.
    question end:
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    question start: Does this means simply copy PBO and PAI of screen 0204 and put it in screen 5000.
    question end:
    Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    question start: does this means create FM OBJECT_CHECK_BUT000 in my case.
    question end:
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    question start: does this means if FM OBJECT_CHECK_BUT000 does not exist in SAP system create it by copying
                            FM OBJECT_CHECK_EQUI.
                            Is it ok if I keep the logic of FM OBJECT_CHECK_EQUI as it is.
    question end:

    Hi Sunil,
    For adding new object first maintain this object in key fields in spro.
    You need to add the DMS sceen to the perticular object sceen with screen exit.
    The object sholud reflect in DMS and DMS screen should reflect in object t-code.
    Check in SE80 if there is no screen exit available for the object ,need enhancement.
    I hope this will help you much.
    Regards,
    Ravindra

  • How is functional location linked with work order tables

    Hi, Experts:
    I am working on a BW project to extract Plant Maintenance data from R/3 to BW system. We need to get work order data with related Functional Location data togather. When check the 2 tables AFIH for Work Order header and AUKF for Order master data, I don't see Functional Location field in neither of the 2 tables.
    Can anyone please tell me how (by which table/field) Functional Location data in table IFLOT is linked to a Work Order stored in tables AFIH and AUKF?
    Many Thanks,
    Jenny

    Hi, Thyagarajan:
    Thanks for the reply! I tried to get the values of ILOAN from table AFIH. And pass the value to the field ILOAN in ITOB. However, no data returned from ITOB. The ILOAN in AFIH has different set of values from the ILOAN in ITOB.
    Any suggestions?
    Thanks,
    Jenny

  • Digital signature for work order processing

    Hi,
    Have anybody implemented digital signature for work order processing? Can you throw some lights,  what are the steps involved?
    Requirement is when work order reach certain status, like on order release, on partial confirmation, on final confirmation or on Technical completion, digital signature needs to be captured. This is a regulatory requirement.
    I read some threads that explains digital signature can be assigned to plant and order type combination, but i couldn't find this specifc config step, we are using ECC 6.0. Is anything needs to be activated before I can see these configuration steps.
    With ABAP help I was able link digital signature tool to work order, but was wondering if this can be achieved through configuration as mentioned in some of the threads.
    Also I have another requirement, like if you are doing a mass TECO using IW38 transaction, capture digital signature once and the same should be applied for all the selected work orders. Otherwise you have to enter your password as many time as the number of work order selected.
    Jaison

    Hi,
    Some information on operation sign-off available in [help|http://help.sap.com/erp2005_ehp_03/helpdata/EN/da/49d9c433ff4985b2484b7b911123cf/frameset.htm]
    -Paul

  • DMS Object Linking with Appropriation Request (Ecc6.0)

    Dear All,
    ECC 6.0(ERP 2005)
    <b>Steps:-</b>  (Error in Object Link for Appropriation Request)
    I am opening DIR in change mode
    going to object links TAB
    attaching object link for appropriation request
    saving the DIR
    Re-opening the same DIR with Appropriation Req. Object link
    going to object link TAB
    double clicking the attached object for Appropriation Req.
    <b>Error****this does take me to maintained TCODE IMA11 for Appropriation Req. "but it does not display specific attached object"</b>
    I mean it is not displaying attached object (Appropriation req.,Variant) it just take me to initial screen of IMA11....
    IF any one knows possible solution pls. reply
    Regards,
    Tushar Dave

    Hi Dave,
    please change the transaction from IMA11to IMA3 and see if the request is now
    displayed. In transaction SPRO under
    Cross-Application Components
    -> Document Management
       -> Control Data
           -> Maintain Key Fields
    the entry for object IMAV should look like this:
    IMAV     IMA3     POSNR1
    I hope this information will help you.
    Best regards,
    Christoph

Maybe you are looking for