DMS Solution with ECDS Systems

Hi ,
I wonder whether anyone deployed the DMS Solution ( TCS, MXE,TCS,DMM, Nexus on demad) with Cisco ECDS systems(MDE 3125/1125). I am working on a project where i need to deploy all these deviecs. I like to undestand the work flow between DMS components and ECDS devices. DMS Solution works as it suppose to, but dont have an idea how i can integrate this solutiuon with the ECDS devices. are there any step by step document to integrate the DMS solution with the ECDS.
Also, i found a document for ECDS/SNS integration and they emntioned it needs the external streaming server for the Integration. Can some one confirm this?.
Thanks for your help
Best Regards,
Chris

Hello
1- . DMP will be used to present (presentations , videos,etc) which will be uploaded on Appspace.
2-Yes of course there are steps for ECDS and DMS. Please find the below links
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dms/integration/notes/ecds_int_note.html
http://www.cisco.com/en/US/docs/video/ecds/2.5/quick_guide/ecdsQuickStart.html
http://www.cisco.com/en/US/docs/telepresence/tcs/5_0/media_servers/configuration/guide/wowza.fm.html
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/integration/notes/sns_wowza.html
3-You should use streaming server as (Wowza server or adobe) , please find the below links.
4-ECDS 1125 can be used for (CDSM , SR, External SE for external users).ECDS 3125 is responsible for (content Acquirer and service engine for internal users).Based on your design
Please don't forget to rate.
Thank you

Similar Messages

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
== URL of affected sites ==
http://http://www.facebook.com (always) and www.YouTube.com (sometimes)

There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
Brianeng

Solution To Network problems with Leopard systems and tiger and vista

After lots of research and looking into sharing data with leopard systems and other os, i finally found a Solution. Before i state what you have to do to fix it here is what the problem is.
Mac Os x( Leopard) systems trying to find computers or share data to other systems on the same lan can't find each other or simply if are found cant share data with each other.
Reason for the problem.
- By default tiger , windows and some linux distro's automatically join WORKGROUP under workgroup in WINS. with leopard this is changed to join local under workgroup. This effectively causes the systems to fail to communicate with each other.
- By default shared folders on leopard has smb not checked by default.
Solutions
-in order to see computers on the same network or workgroup. find out the workgroup with which all the local machines are connected to, then on your leopard system goto Apple->System Preferences->network ->advance and head over to WINS tab from here either select your workgroup or type in your workgroup. hit ok then apply in the network window. ( restart your mac at this point int time and try browsing the computers in your network)
- to make sure you can share folders with windwos machines goto apple->system preference ->Sharing. Make sure file sharing is selected then choose the folder you want to share or add a folder you want to share. next click on options and enable Share files and folders using SMB enter your password if it asks and then hit done.
hopefully this helps people with problems on their mac's. other wise you have three options if this is too much trouble install vmware fusion/parallels on your machine and install windows / install windows using bootcamp / and last get a windows machine ( although this choice is highly unlikely it's still a choice). Please note this is not a windows vs mac subject is just that apple has changed the network stack protocols and architecture so stuff is being done differently , you just got to think different to get stuff to work. but after it's all said and done all your system should work in harmony now.

Thank you all for replying. I upgraded to Tiger from Panther the first week and it worked AWESOME! I do have to say that I truly and beginning to feel like I'm having issues I would experience on a windows machine. I know that Apple will fix but it is frustrating that I'm having the issues that I'm having.
I just need to finish up the project I'm working on and then I'm going back. I'm currently without any admin rights on my computer but I'm working away. I actually don't know what to expect next so I'm just backing up my data from time to time and working hard to get this done and get back to Tiger (that will be a long process so don't want to get started).
Again thank you all! Also I want to call Apple about this but don't want to wait on hold for the tech. AND they are only open during business hours. Guess what, I work during business hours. What's up with that? Adobe is available all the time.

IOS 7 DOES NOT WORK WITH UCONNECT SYSTEM!!!!! SOME SOLUTION FRON APPLE OR UCONNECT??? (or get android?)

since iOS 7, no iphone can pair with Uconnect system from chrysler, dodge, jeep, ram and fiat
no answer fron apple, neither from Uconnnect
WHAT TO DO!!!!!!!!! android???

I suspect there are many users of iPhones that would disagree with your broad, sweeping statement.
Frankly, if your statement were true, there would be many others here posting the same thing and that simply is not the case.
Regardless, these are user to user support forums. You will not get an official response from Apple here. If you want/need a response from Apple, pick up the phone and contact them.

PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar

Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420

Pixel Aspect CS4 is no compatible with other systems/softwares

If you make a video with a circle twisting around itself in CS4 in a comp like dvpal (PAR 1,09) and export to other system like smoke, flame, avid, final cut, When import, the video is ok, but if you want twist de video around itself (IN SOME OF THIS SYSTEMS) the circle deforms like an oval or an egg. This dont occur if you do the circle in previous after effects with PAR 1,07 because the settings match with the other systems (avid, etc). The same deformations occur whit if you make a circle in a still image. Make a circle in CS4 in DVPAL (1,09) and export like still image,import and rotate in other software (avid, finalcut, smoke, etc.), it look like an egg. So what happen with this? This new Pixel aspect is no compatible with the other softwares!. This is bad!!!What's the solution? Must wait for the correction in all the other softwares? I don't think so. Sorry my english. Thank's. Diego (Argentina)

Diego,
Can you post a screen shot of this error showing in a flame?
Please note that the presets in CS4 are just that; presets that you can easily change or ignore. If you're working with a system that dislikes the correct values; by all means use the old values when you're setting up and rendering your AE project.
The CS4 PAR values are technically correct, it's just that the industry have been ignoring the "blanking" in video for all these years.
- Jonas Hummelstrand
http://generalspecialist.com/

Issue with latest Adobe Reader 11.0.10 - Adobe Reader cannot open in Protected Mode due to incompatibility with your system configuration.

Since updating to the most recent Adobe Reader v11.0.10, getting an Adobe Reader Protected Mode: Adobe Reader cannot open in Protected Mode due do an incompatibility with your system configuration. Would you like to open Adobe Reader with Protected Mode disabled?

The solution I was looking for was to launch Adobe Reader in Protected Mode.
I could not identify issues preventing Protected Mode from starting. What ended up working, was to do a complete uninstall, followed by a reinstall. Now we can load Reader in Protected Mode.

Multiple Industry Solutions in One System

Hi,
Could anybody please confirm if multiple Industry Solutions can be turned on within a single SAP instance (e.g. CPG and Life Sciences)?
Thanks in Advance.
Regards,
Mahendra
Edited by: Mahendra Parachuri on Mar 28, 2009 4:06 AM

Hi,
Please click [Multiple Industry Solutions in One System|http://www.entegreat.com/eg_industrysolutions_casestudies_foodandcpg_mde.htm] for your reference.
With Regards,
Krishna.

8900 printer changed black cart. error code problem with printer system

Changed black cartridge in 8900 series all in one printer error message says trouble with print system call HP. Have removed and reinstalled catridge still same error message. HELP!!!!!

Hi @melvinc
Welcome to the forums
I read about the issue you are facing on your printer, as it's now showing a problem with the ink system. I cannot locate a "8900" printer, could you possibly have the Officejet 8600? If so, please try out the steps from the guide below. If you reach a step where it asks to replace the printhead or printer, call us directly to see what your replacement options are with HP.
A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Does anyone knows a way to work with various Pages documents at the same time, for example with a system of tabs to switch directly from one document to the other?

Hello everyone,
Working with numerous Apple Pages documents at the same time, I am looking for an efficient solution to switch faster from one document to the other. Integrating all them in a single framework, for exemple by switching from one to the other with a system of tabs would be of great help. Does anyone knows if such a possibility exists?
Thanks in advance,
Jean-Baptiste

jbp- wrote:
Thanks. It works and is very efficient. Not as much as a real system of tabs, but is allows to switch very fast between different documents. Only regret I would have is that it doesn't work with a document which is on full page mode. But that's already very helpful!
You're very welcome but Peggy really gave you the answer already.
With regard to the full screen apps, I don't think Apple have yet worked out how to make them elegantly coexist with other apps. The closest you can get is the four finger swipe gestures you may use on a trackpad if you have one (Mission Control and App Exposé).
In fact nowadays I use the App Exposé (four finger swipe down gesture) more often than I use Command-Accent to move between documents in the same app (when not in full screen). It also as the advantage of showing you thumbnails of recently opened documents below the ones already open within the app. If you haven't tried it, I suggest you give it a whirl.
I can't remember now but I think the four finger gestures are not enabled by default and you must switch them on in System Preferences > Trackpad > More Gestures.

Federated Portal solution with 2004sBI.

Hi,
I would like to know the limitation when using fedelated portal solution with 2004s BI. that means 2004s BI web functionalities are used via Enterprise-wide portal, diferent from portal component for BI.
many customers who decide to implement mySAP ERP2005 solution is likely to implement 2 portal components. One is only for BI, another is for Enterprise wide portal, without considering system configuration deelpy.
About the portal content, the following URL show the solutions.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/frameset.htm
-Integration using a URL iView
-Export/import
-Global portal (federated portal)
I think the global portal is the best.
About the KM contents, I am now think what is the best way.
I think by using fedelated portal solution, KM content iView and KM navigation iView can be used on the corporate wide portal.
But I am not KM expert and now am considering how to use KM contents which is on BI's EP(KM) as same as those on Enterprise wide portal. is it possible if setting webdav on repository manager on enterprise wide portal?
Kind reagards,
Masaaki

There are a lot of things to consider with KM, one repository or 2? The federated Portal will work with assigning a KM navigation iView to a Role and using remote role assignment. This would put KM on the producer portal. The other option is to setup a Remote KM Repository on the Consumer Portal that points to the producer. This way you can broadcast to the producer KM repository and see this in the Consumer Portal.
With Collaboration Rooms, there are some limitations, such as the Room Directory doesn't work with remote URL iViews or Remote Role Assignments as it launches the URL on the consumer instead of the producer. Currently, Collaboration Rooms should be centralized on your single consumer. If you need to broadcast to it in the producer, you would have to setup a link to a remote repository...
Therefore, if you're working with KM specifically, it all works within the framework, but you need to decide how centralized or decentralized you want your document storage, so there are a lot of project considerations on this one....
Also, webdav works to access the KM repository both on the consumer and producer...

ChaRM implementation with virtual systems

Hello Gurus,
We have successfully installed and done basic settings for Solution Manager 7.0 EHP1 system, we are planning to implement ChaRM and I have already downloaded the guide for it.
But I have few doubts regarding its setup like since we don't have DEV, QAS and PRD setup yet, so is it possible to configure ChaRM right now?? maybe with virtual systems ??
Will it be better to configure ChaRM only after DEV installation ?
Also, I am not clear about the transports which will be done from Solution manager using ChaRM, is it like you create transport request from Solman or from DEV ??
Thanks for providing any valuable information !!
Cheers !!
Shobhit Garg

Hi
these will help you
http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
Regards
Prakhar

How enabled Single Sign-On with a System SAP WAS ABAP (Run application BSP)

Hi.
I need to run any application BSP from a System SAP WAS ABAP, without entering SAP user and password. Using the windows authentication and without SAP Enterprise Portal.
What authentication methods I have to apply for enabled Single Sign-On with a System SAP WAS ABAP?.
And How can I enabled this method?.
Best regards.
Luis Gomez.

Hi Ticiano,
SAP WebAS ABAP supports a number of authenticaiton mechanisms. See
[http://help.sap.com/saphelp_nw04s/helpdata/en/02/d4d53aa8a9324de10000000a114084/frameset.htm]
A number of these authentication mechanisms can be combined with Windows authentication (e.g. SNC, client certificates, ...).
The decision what mechanism fits best depends on critieria like
- SAP server platform
- security requirements
- extensibility (should same authentication mechanism be used for future SAP environments, which will be E-SOA based)
- authentication from outside company domain
- Use of SAP security library (SAPcryptolib)
You may want to look at the SAP Software Solution Partner Catalog, if you look for certified SSO solution vendors for SAP.
Best regards,
Peter

Adobe reader cannot open in protected mode due to an incompatibility with your system configuration.

I keep getting the error message: Adobe reader cannot open in protected mode due to an incompatibility with your system configuration.
I have Windows 7 Home basic Service pack 1 and have already uninstalled and re-downloaded Adobe reader XI twice. I have also read other threads on this forum, and
tried the suggestions, including running Kaspersky anti-rootkit, no threats were found.
My Adobe reader shortcut icon shows a small blue and yellow shield in the bottom right (I uninstalled Windows essential protection), but the problem prevails.
I would rather get to the root of the error and fix it and not just disable protection mode!
Please help.

Hi,
Please refer to the solution in:- Error: “Acrobat Failed to Load core DLL”.
Also, may want to try disabling all Non-Microsoft Startup Services.
Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html
Regards,
Nakul

Why is Mozilla doing buisness with Cisco Systems Inc., a known U.S. miltary contractor who helps the U.S. government sps on everyone???

Mozilla claims that they are dedicated to protecting our online privacy, rights and freedoms, yet they are apparently doing business with Cisco Systems Inc. Cisco is a U.S. military contractor for the U.S. Department of Defense (D.O.D.). They work with the N.S.A. and help them in their efforts to illegally and unlawfully spy on everyone. So why are they installing their OpenH264 "Video Codec" on our PCs as an add-on without providing us a way to remove it? I've already "disabled" it and "turned off" the automatic updates, but that's not good enough. This is SPYWARE and potentially MALWARE. I want this garbage off my computer COMPLETELY. How do I remove it? Disabling spyware doesn't actually disable it. Complete removal is the only solution.

Hi JOHN_DUH,
Thank you for your question. It is possible to disable the codec and remove it with these instructions:
# From the Firefox Menu click on "Add ons"
# Click on "Plugins" on the left column
#Next to the Codec click on "Never Activate"
This will disable the codec as well as the plugin. If you would like to double check the about:config entry:
In order to change your Firefox Configuration please do the following steps :
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''' to continue to the about:config page.
#Search for 264
#Toggle '''media.peerconnection.video.h264_enable''' from true to false.

DMS Solution with ECDS Systems

Similar Messages

Maybe you are looking for