DN for an IP Service?

Is it possible to assign a directory number to an IP Service?

Hi,
I think he want to dial a number and it calls the IP Service.
If it is that, it is not possible or could be if you have an IPCC / CUCC and create a script
Or Perhaps a complicated developpment inn JTAPI / TAPI
Please rate this Post
Remy

Similar Messages

Best Practice for Securing Web Services in the BPEL Workflow

What is the best practice for securing web services which are part of a larger service (a business process) and are defined through BPEL?
They are all deployed on the same oracle application server.
Defining agent for each?
Gateway for all?
BPEL security extension?
The top level service that is defined as business process is secure itself through OWSM and username and passwords, but what is the best practice for security establishment for each low level services?
Regards
Farbod

It doesnt matter whether the service is invoked as part of your larger process or not, if it is performing any business critical operation then it should be secured.
The idea of SOA / designing services is to have the services available so that it can be orchestrated as part of any other business process.
Today you may have secured your parent services and tomorrow you could come up with a new service which may use one of the existing lower level services.
If all the services are in one Application server you can make the configuration/development environment lot easier by securing them using the Gateway.
Typical probelm with any gateway architecture is that the service is available without any security enforcement when accessed directly.
You can enforce rules at your network layer to allow access to the App server only from Gateway.
When you have the liberty to use OWSM or any other WS-Security products, i would stay away from any extensions. Two things to consider
The next BPEL developer in your project may not be aware of Security extensions
Centralizing Security enforcement will make your development and security operations as loosely coupled and addresses scalability.
Thanks
Ram

How do I tell my clients to configure the connectionstrings for a cloud service?

I have an application that exists in two forms
A Windows Service
A Clouse Service with a Web Worker Role
Both applications have an encrypted connection string in the app.config;
for clients using the Windows Service I know how to tell them to change the config file.
For a cloud service is it possible to edit the configuration file?
I read something about Azure Settings, but I can't find any good information about that, is that the preferred method for setting environment settings in a Cloud Service?
Can you remote in to a VM or whatever hosts the Cloud Service?
Thank you for any help. I am writing the documentation about how to setup the Azure environment and I realized I don't know myself, I only know how to publish with Visual Studio to a cloud service with the values already set. That works, but I can't
tell a client to use Visual Studio.

Hi,
For a cloud service, though it is possible to access instance VMs and do changes on their file system by RDP sessions, but it is not recommended, as you will end up loosing your changes if role instance VMs are restarted.
If you really want to keep certain settings configurable and which will be shared by all your role instances, best way to do is to utilise the cloud service configurations, typically you mention these settings in .cscfg file and you can also edit those using
azure management portal.
You can also access those from your code
string settingValue = CloudConfigurationManager.GetSetting("SettingString");
Read more about it here - http://msdn.microsoft.com/en-us/library/azure/ee405486.aspx
http://haishibai.blogspot.in/2012/09/windows-azure-cloud-service.html
Bhushan | Blog |
LinkedIn | Twitter

Idoc for materials and service for same contract.

Dear All
I have an scope where i have to migrate the data for material and services for the same contract.Is there an Idoc which does it so or otherwise ?Earlier in scope materials contracts have been loaded with the help of idoc type :- PURCONTRACT_CREATE01 and that of Service Contract using Idoc type :- BLAORD03.No customization is however permitted .Tcode for the same is ME32K.
Regards
Somnath

Hi,
It is not clear to me if you are working with sapscript or smartforms.
You have only to find a variable which identifies the kind of invoice
I do not know that variable so i use an example variable
for sapscript:
/: IF &VBDKR-FKTYP& = '1'
/ INVOICE
/: ELSE
/ SERVICE ORDER
/: ENDIF.
In a smartform you can also do something like that.
but There you work with conditions (eq, BOOLEAN)
You have only to find the right variable
success,
Gr., Frank

I am trying to now install a free trial of indesign because despite paying $50+ a month for this supposed service I cannot open an indesign file I've been sent and need to do work on it urgently. I have now signed in again for a free one month trial and i

i am trying to now install a free trial of indesign because despite paying $50+ a month for this supposed service I cannot open an indesign file I've been sent and need to do work on it urgently. I have now signed in again for a free one month trial and it claims to be downloading but this is not happening at all. I am on a Macbook Air and Abobe for my $600 a year membership you have totally ruined by Friday night. If there's a human being out there at Abode please respond now

Hi,
If you have already subscribed to the membership, please follow the help document below:
https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
Regards,
Sheena

How to use Batch operation for two xsodata services?

Hi All,
I have two xsodata services. How to use submit batch for two xsodata services
Thanks,
Mj

Gateway Batch Calls from SAPUI5

How to configure proxy services in OSB for Rest based services?

how to configure proxy services in OSB for Rest based services implemented using Jersey (Rest).
The Client need to contact OSB proxy servies by posting application/xml using jersey client and OSB proxy service will call the OSB business service.
i would like to know how to get this request in OSB proxy service and send it to the business service and get the response back.

I would suggest you refer to the below links:
https://blogs.oracle.com/jeffdavies/entry/restful_services_with_oracle_s_1
https://blogs.oracle.com/jamesbayer/entry/using_rest_with_oracle_service
Hope this helps.
Thanks,
Patrick

How to delete the coverages for an ACTIVE service contract ?

Hi ,
     I have created coverages for few service lines for a service contract in R12. The contract is in ACTIVE status. If it was in ENTERED state, I could use OKS_COVERAGES_PUB.DELETE_COVERAGE to delete the coverages. But this contract is in ACTIVE status.
     Basically I want the lines lse_id=2,3 removed for a particular line (lse_id=1) which were created by using OKS_CONTRACTS_PUB.CREATE_SERVICE_LINE. This contract has a standard coverage and hence there should not be lines with lse_id=2,3 for that particular service line .
     Also, I am not able to delete a coverage for an EXPIRED contract.
     Please let me know if you need more information on this.

Hi 2619098
Did you find a solution for this? I am having the same problem. Please advice.
Regards

Unable to get the admin object for the CsContainerAdmin service

Hi,
On AIX, we deployed XIR2 SP2 --> XIR2 SP3 --> SP3 Productivity Pack.
The Conection server does show up on the server list in the CMC, but on trying to access this server, it throws an error" Unable to get the admin object for the CsContainerAdmin service"
Tried to manually create another Connection server, same result.
Is this an issue that is addressed by a later FP?
Thanks in advance
Rajesh Jayakumar

Hi Rajesh,
Were you able to resolve this issue? I am facing the same issue with almost every BOE 11.5 SP3 server on Windows.
For example, the Input file server says this -
"Unable to get the admin object for the FileServerAdmin service for server Input.BOCMSMSGT1.fileserver".
Getting the same error on WebI Report Server as well -
There was an error while retrieving data from the server: Unable to get the admin object for the WebiServerAdmin service for server BOPROCENG1.Web_IntelligenceReportServer.webiserver
Thanks,
Sarang
Edited by: Sarang Deshpande on Sep 26, 2008 3:08 PM

Error when uninstalling App-V RDS client: Product: Microsoft Application Virtualization (App-V) Client for Remote Desktop Services 5.0 Service Pack 2 x64 -- Error 1324. The folder path 'C:' contains an invalid character

Issue: experienced when attempting to uninstall the App-V 5.0 SP2 RDS client.
Event Log: Product: Microsoft Application Virtualization (App-V) Client for Remote Desktop Services 5.0 Service Pack 2 x64 -- Error 1324. The folder
path 'C:' contains an invalid character
Symptoms (when in this current state):
Unable to uninstall the SP2 client
You can upgrade the client (via hotfix) and uninstall the hotfix, but you will not be able to remove the SP2 client
AppvVfs filter driver will not create an instance, therefore applications will not be able to read into existing streamed VFS content, or trigger sparse files to stream content. (you can still stream the content via other means, like the UI or powershell)
Because of the AppvVfs filter driver not instantiating, applications that depend on licences that exist in VFS will not be able to be read causing certain applications to react as if the license does not exist or is an incorrect format

Resolution:
Check for the existence of a hidden folder named %appdata% in the C:\Program Files\Microsoft Application Virtualization\Client folder. (You will need to un-check the folder options box in windows explorer for "Hide
protected operating system files" to see it)
If the hidden %appdata% folder exists, delete it.
Proceed to uninstall the App-V client
After a clean uninstall and removal of remnants of the client, reinstall the client again and apply the latest hotfix available (Hotfix 2 for SP2 at a minimum).

Error - iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3 ???

In Windows 8 I received the error iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3.
I've tried changing permissions and sharing - nothing seems to work. mat be a Windows 8 issue???

You also need to make sure you have both read and write permission for the file, or for the whole iTunes folder for that matter. That's also done in Get Info for the file or folder concerned.
Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

Custom ITS transaction for Confirm goods/services in SRM

Hi Experts
i need to create a custom transaction same as standard one for confirm goods/servics in SRM portal.
In sap GUI, the transaction is BBPCF03
Can you please suggest any good sources where i can learn to Custome Tcodes for my requirement
Thanks in advance

Hi,
We can learn it from SAP standard cording. Go to SE80, Internet Service, BBPCF01.
Regards,
Masa

What are the different messages that OCOD may return for a web service requ

Hi,
Please give me feedback on the questions below, concerning the limitations of web service, and messages which may return.
1) What are the different messages that OCOD may return for a web service request? I need all the messages of all the scenarios which OCOD can meet, for example:
- If the file is rejected (Error message)
- If the file is accepted (to clarify that the records have been created)
- if the application is unavailable (maintenance or web service is down)
2) How many request can we send simultaneously, and how many records we can make per second?
Best Regard,

Have a look here Jquery slideshow tutorial for beginners | WEBTUTS

Function Moduel for Acceptance of Service Entry Sheet

Dear Experts,
We have a requirement, in which we need to accept the Service Entry sheet from a web service. For this purpose, we are searching for suitable BAPI. We have BAPI for Release of Service Entry Sheet. But failed to find any BAPI / Function Module for the acceptance of the Service Entry. Please suggest a suitable function module / if available please share the source code for the same.
Thank you,
Regards,
Ramakrishna Mangena

HI Ram,
Please Find a few Function Module Below
BAPI_ENTRYSHEET_CREATE
BAPI_TRANSACTION_COMMIT
Please Find the Link Below. it has code
Hope this will be Help Ful
[Code|Error while creating service entry sheet]
Thanks
Kalyan

Mapping input values for a web service connection to a range of cells

I've created a web service connection in Xcelsius data manager. My web service requires an array of integer as input parameter. How do I map input values for a web service connection to read from a range of cells in the spreadsheet, e.g. $A$2:$A$20, in similar way of mapping output values to write to a range of cells in the spreadsheet?
For output values of the web service, I can specify to map the output values to write to a range of cells. However, it doesn't seem to work for reading the input values.
I can map input values for each node to a single cell, e.g. $A$2, in the spreadsheet. However, when I set the "Read From" field to a range of cells, e.g. $A$2:$A$20, it only reads in the first value in the range.
Is there any way that we can do this mapping for input values as we do for output values?
Your assistance is very much appreciated.
Regards,
Van

Van,
There is a workaround for that...
Example:
My Webservice accepts input data range in a specific format with " :" symbol, i.e. 072008:082008
Now what i do is
A1 = 072008
A2 = 082008
A3 = CONCATENATE(A1,":",A2)
so A3 = 072008:082008
Now i map the input value in web service to cell A3
P.S have 2 input box components and map it to cells A1 and A2, i.e you are giving users an option to enter the range of values...then web service will capture the range and refreshes data with the range of values user entered.
hope this helps..
-Anil

How to define tcp wrappers for a new service in Solaris 10?

Hi all, I need to setup tcp wrappers for a third-party software product with /etc/hosts.allow.
I installed Trillium software on a new Solaris 10 server. It added this entry to /etc/inetd.conf:
dscserv0_rel1300 stream tcp nowait tsadmin /usr/bin/env env -i HOME=/home/tsadmin LOGNAME=tsadmin /opt/trilv13/TrilliumSoftware/server/metabase/bin/mtb_server
After the install, I ran inetconv and this new SMF service was created:
*# svcs -a|grep dsc*
online 13:22:57 svc:/network/dscserv0_rel1300/tcp:default
Here's the problem: After this, all new connections were denied by default. I had to disable tcp wrappers with this command:
inetadm -m svc:/network/dscserv0_rel1300/tcp:default tcp_wrappers=FALSE
I would prefer to enable tcp wrappers, and put an entry into /etc/hosts.allow, but I can't figure out what service name to put into /etc/hosts.allow. I've read through the man pages but I can't identify the service name to use for this new service, and it won't accept the FMRI or an abbreviation of it either.
How do I identify the service name to put into /etc/hosts.allow?

At OS level, before entering Sql*Plus, do :
$ EDITOR=vi; export EDITOR
$ sqlplus ......
Message was edited by:
Paul M.
Ciao Nicolas :-)

DN for an IP Service?

Similar Messages

Maybe you are looking for