DNG 4.5 and Elements 6.0

I just downloaded Camera Raw 4.5 and DNG 4.5 but in Elements 6 I can only open Camera Raw , but when I try to save in dng format, I dont see the new DNG 4.5 working with Elements 6.0 only its older version...how can i integrate the new one, DNG 4.5 ???raf

Thanks, I run Windows vista. I guess what i was trying to say is , that after installing ACR 4.5 in Elements 6.0 there is also DNG converter running .You cannot save directly photos into jpgs from RAW. So this can be done by saving files(pictures) in DNG format only. The DNG converter in my camera raw 4.5, after installantion-- seems like is outdated version, definatelly not DNG 4.5 i can run separetlly and the version I downloaded together with the Camera Raw 4.5...I' d like to to uninstall the older version and install the newest one , is that possible??? I only were able to upgrade camera raw software....thanks , raf

Similar Messages

Nikon D600 and Elements 10

Hi
I recently bought a Nikon D600 and don't seem to be able to load photos onto Photoshop Elements 10. Any suggested solutions would be most appreciated. I have tried to install "Updates" from the Help menu but it says that the applications are all up-to-date.
Is Camera RAW 7.3 just for CS and not for Elements?
Don

Thanks for the prompt response Barbara.
I will look at this again tomorrow. It's time for bed.
Don
Date: Sun, 30 Dec 2012 18:26:19 -0700
From: [email protected]
To: [email protected]
Subject: Nikon D600 and Elements 10
    Re: Nikon D600 and Elements 10
    created by Barbara B. in Photoshop Elements - View the full discussion
No, it's for PSE, too, but only for PSE 11. You can use the Nikon software to convert the files or download the free DNG converter from Adobe and use that to create files that your version of ACR can read, or upgrade to PSE 11. DNG for windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5519 for Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5518
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4958080#4958080
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4958080#4958080
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4958080#4958080. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have CS5 and Elements 9. Neither one will open my raw photographs from either my Canon EOS 6D or Canon G12 cameras.

I have CS5 and Elements 9. Neither one will open my raw photographs from either my Canon EOS 6D or Canon G12 cameras.
Do you understand my problem?

Hi,
What operating system are you using?
Both photoshop cs5 and pse 9 should be able to open the canon G12 files, but you probably need to update camera raw
For cs5 go to Help>Updates from within photoshop cs5 to get camera raw 6.7
For pse 9 you have to download and run the installer for camera raw 6.5
windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5264
mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5263
For the canon EOS 6D you'll need the 8.4 dng converter to convert the files to dng copies which cs5 and pse 9 should open, since neither cs5 or pse 9 can be updated to the newer camera raw plugin required for the 6D files.
windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5739
mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5738
Note:
If you have windows xp or vista or mac os x 10.6, then you'll have to use the 8.3 dng converter instead of 8.4
windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695

I purchased Lightroom 5 and Elements 12 and installed them on a computer. I now have a new computer, and wish to install them on the new one. When I tried to do so, my only option seemed to be Adobe Cloud. When I was asked for my LR serial number, it was

I purchased Lightroom 5 and Elements 12 and installed them on a computer. I now have a new computer, and wish to install them on the new one. When I tried to do so, my only option seemed to be Adobe Cloud. When I was asked for my LR serial number, it was not accepted. Please help me install these two products; I prefer stand-alone, rather than a monthly fee. Thank you

PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

Dreamweaver CC automatically deletes code in code view and elements in design view

When I open a file in Dreamweaver, it automatically shows a * next to the filename - showing it has been edited.
Then often when I select some code in code view, or an element in design view (such as a table, an image, some text) it is suddenly deleted.
The problem is especially bad (happens without fail) if I am switching between programs. But also happens when I'm not switching.
I do not have this problem on a different user account.
I have reinstalled Dreamweaver three times now. Also renamed preference and configuration folders. Tried with a wired mouse and keyboard. Nothing has worked.
I can't think what I did to cause this. I installed MAMP recently - but have uninstalled it correctly I think.
I had an issue with one file in which there were about 30 Spry collapsible panels. I kept getting this warning:
"A script in file Macintosh HD:Applications:Adobe Dreamweaver CC:Configuration:Shared:Spry:DesignTime:EditingUtils.js has been running for a long time. Do you want to continue?"
I have to click 'yes' many times to get into the file, and the warning keeps coming up while the file is open.
However, my big issue of DW CC deleting code and elements happens whether or not this particular file is open.
So this may have nothing to do with it.
Any ideas anyone?
Adobe's customer service has not helped. In fact, I have not even been able to get through to anyone on the phone - having waited literally hours listening to music, and getting shunted from person to person. And then their promised 'call backs' never happen.
Thanks,
- Greg

I do not have this problem on a different user account.
You've got a bad/corrupted user account. Create a new one with Admin level priveleges and delete your old user.
Nancy O.

Raw updates needed for CS5 and Elements 11?

I have several adobe products. I want to install the latest raw updates for CS5 Photoshop and Elements 11. The app. manager tells me I have the latest updates. My CS6 product updated the newest raw product but not my others. I would like to get phone support for these issues - is there a phone number that connects to real people? The %^*()^ support section on the web takes me around in circles - very frustrating. Any help out there?

the good old argument is at what point do you stop supporting stuff? Elements is now up to 13.
I assume Adobe would argue you have cc already why are you still using cs5?
As I read it, the new 8.7 raw is only good for cs6 and above. They won't make 2 versions of raw, so I assume you are still on 7.4 for cs5?
On that basis, alas stick with your cs6 to do the newer stuff you need.
that all said, a bit of manual tweaking seems to work for some people. - Camera Raw 8.1 and PSE 11 - Elements Village

I have Photoshop and Elements 9, and im getting a new computer. I would like to put them on the new one. I tried my serial number but it didnt work.

I have Photoshop and Elements 9, and im getting a new computer. I would like to put them on the new one. I tried my serial number but it didnt work. I dont know what to do?

Error "The serial number is not valid for this product" | Creative Suite

Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

Photoshop and elements 13 Working in iPhoto Want to edit image using photoshop elements Did the following IPhoto Preferences Advanced Edit Photos: In drop down menu chose in Photoshop Elements Also control click and chose edit in external editor Drop

Photoshop and elements 13
Working in iPhoto
Want to edit image using photoshop elements
Did the following
IPhoto>Preferences>Advanced>Edit Photos: In drop down menu chose in Photoshop Elements
Also control click and chose edit in external editor
Drop down menu edit photos in external program>photoshop Elements
Go to to the image I'm working on --- selected the image, the clicked on edit. When nothing happened I double clicked the image. Still elements didn't open. Then I opened the Elements editor, went back to iphoto and tried the entire process again. the photo still didn't open on Elements 13 for editing.
I have 3 Elements 13 books as well as looked on line--all my references say the exact same thing ---- iPhoto>Preferences>advanced>edit in external program>photoshop Elements
I uninstalled and reinstalled both iPhoto as well as Elements.
I spoke with application technical support. There appears to be nothing wrong with my copy of iPhoto. However there is no support from Adobe. I waited for over 1.5 hours for chat support several days ago, and finally gave up.

You are probably choosing the obvious file rather than the correct file as the PSE editor. The actual editor is hidden away inside the Support Files folder. The PSE file at the top level of the PSE folder in Applications is just an alias for the welcome screen and what you're describing is exactly what happens when you choose that. You want this one:

Color picker not working in CC and Elements 12

My Color picker keeps picking gray instead of any other color i chose. its the same in CC and Elements 12. I'm on an iMac running Yosemite.
the color picker works ok when no document is open but reverts back to gray once i open one.

Cheers thats worked. don't know how grayscale got selected.

Adobe Photoshop Elements editor quit unexpectedly, Mac OS X Yosemite 10.10.3 and Elements 11. It does this every time I try to apply a filter

"Adobe Photoshop Elements editor quit unexpectedly" Mac OS X Yosemite 10.10.3 and Elements 11. photoshop quits and I get this message every time I try and apply a filter to a pic?

Could you please attach the crash report so that we can see what is causing PSE11 to crash.
Meanwhile please try resetting preferences by:
Press Cmd + K > It will open preferences dialog > In genearl tab, click on Reset Preferences on Next Launch
Thanks,
Anwesha

Adobe Photoshop Elements editor quit unexpectedly whenever I apply a filter to a pic   Mac OS X Yosemite 10.10.3 and Elements 11.

"Adobe Photoshop Elements editor quit unexpectedly"   Mac OS X Yosemite 10.10.3 and Elements 11.   photoshop quits and I get this message every time I try and apply a filter to a pic?   Please help

I believe I did yes. So if I upgrade to PSE 13 will those filters work?
      From: Barbara B. <[email protected]>
To: Brad Simmons <[email protected]>
Sent: Thursday, April 30, 2015 3:17 PM
Subject: Adobe Photoshop Elements editor quit unexpectedly whenever I apply a filter to a pic   Mac OS X Yosemite 10.10.3 and Elements 11.
Adobe Photoshop Elements editor quit unexpectedly whenever I apply a filter to a pic   Mac OS X Yosemite 10.10.3 and Elements 11.
created by Barbara B. in Photoshop Elements - View the full discussionIf the problem is with the Graphic Novel or Comic filter, those don't work in PSE 11 any version of OS X after 10.7, IIRC. For other filters, did you delete all your existing preferences on upgrading to 10.10? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7500246#7500246 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7500246#7500246 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

In Windows 7 I mistakenly un-installed Adobe Application Manager and all applications (CS3E, CS5 and Elements 6) have disappeared from programs on the start menu

WIN7: Mistakenly un-installed Adobe Application Manager and now all Adobe apps (CS3, CS5 and Elements 6) have disappeared from the programs list in the start up menu.
CS5 Bridge is still there so I can get into the photo editor to de-activate it and re-install.
However, all of CS3 has disappeared so I cannot get into it to de-activate.
Question 1: Will downloading and re-installing Adobe Application manager get CS3 automatically back?
Question 2: If not, what to do to get CS3 back things working properly again? Remember, I can't de-activate it.
Thanks and have a happy day!

Don't worry about activation unless you are installing on a new and different machine. Simply reinstall in order. It should all work.
Then install any updates. Product updates
After that, let me know how it went and if there are any further questions.
Gene

I got a new MacBook pro and want to install my lightroom and elements 11.

I uninstalled both programs on my old computer and this computer were set to factory setting and sold.
When I try to install on my new computer - after informing my serial numbers, I get the answer, that this number is not correct. II of course checked again, and the typed numbers are correct. The same as mentioned on you webside under my file.
please help.
Kaj Aarup
Denmark

Hi,
thanks for mail. I now tried again to activate lightroom by copying the serial number on Adobe webside/my account. Unfortunately same result: I got the following message:
The serial number is invalid. Please try again: if the problem persist, please contact customer support.
Unfortunately the could or would not help - only referred to this chat page.
I have serial numbers for both version 4 and 5 and of course downloaded the latest, which is version 5.
regards
kaj
Den 10/03/2015 kl. 11.37 skrev NicHamilton <[email protected]>:
I got a new MacBook pro and want to install my lightroom and elements 11.
created by NicHamilton <https://forums.adobe.com/people/NicHamilton> in Photoshop Lightroom - View the full discussion <https://forums.adobe.com/message/7271945#7271945>
Hi Kaj,
firstly this is a user to user forum so it's not our website, nevertheless I'm sure we can help you.
Firstly, are the serial numbers you're using for the same version of Lightroom?
If they are, then I'd suggest copying the serial numbers straight from your profile on the Adobe website to the Lightroom screen rather than retyping. It's easy to mistype even when you're sure you're not (we've had several such instances in the past).
Can you five us the exact wording of the error message (or a screen grab as long as it doesn't reveal the serial numbers as this a public forum)?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7271945#7271945 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7271945#7271945
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Lightroom by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 16>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Hi, I try to load a photo from desktop and Elements 12 opens up but the photo doesn't appear in the screen. I used to get it but lately they don't appear.

I click on one of my photos on desktop and Elements 12 opens up but the photo doesn't appear on the screen. I was getting it before but it doesn't come through now.

Which operating system are you running on?
How are you trying to open the photos?
- from windows explorer? - double licking or right clicking and selecting Open with?
- by loading the editor and go to File -> Open?
Looking back at your other threads you seem to have had this problem before - what keeps changing?
Brian

DNG 4.5 and Elements 6.0

Similar Messages

Maybe you are looking for