DNG 5.4 does not work well with Olympus E-620

I just installed the DNG converter 5.4 to use with the RAW ORF files from my new Olympus E-620. The converted images are not the same as the jpg images or the RAW images as converted by the Olympus Master software. They are duller in the highlights and darker in the shadows. The difference is NOT small and is readily noticeable in the image and when comparing the histogram. It looks like part of the problem may be that the Olympus automatic gradation may not be interpreted properly, but the difference is even more than just this. I can turn this on and off in the Olympus Master and the difference is similar but a greater difference than just this alone. Further, the Olympus Master software cannot open the DNG files.
I would also like to rgister my high dissatisfaction with the short life of the Adobe software due to the new RAW converters not working with older Photoshop or Lightroom software versions. I am using Lightroom 1.2 and PS CS3, and I do not want to spen the considerable cost of upgrade only to be able to convert my RAW files. Also, I do not like to have to convert my RAW files to DNG first, because I loose some of the editing options that I can only do in the Olympus software, and it creates another step in my workflow.

shedridc wrote:
The converted images are not the same as the jpg images or the RAW images as converted by the Olympus Master software.
Well, doh...since Camera Raw is using it's own processing parameters and algorithms, the odds of ACR "matching" the camera makers software is not real high. At some point when ACR 5.4 is finally released Adobe may have some additional DNG Profiles for the camera that may make color a closer match but the tone curve will prolly always needs tweaks. It would behoove you to either create presets that you can apply in Bridge or alter your ACR "Defaults".
shedridc wrote:
I would also like to rgister my high dissatisfaction with the short life of the Adobe software due to the new RAW converters not working with older Photoshop or Lightroom software versions.
It's been Adobe's policy to only support currently shipping products. As such, customers who upgraded to Ps CS4 can expect about 18 months of free support and Camera Raw updates. Fact is that while you WERE a current customer when you bought CS3 and you got 6 free ACR updates (ACR 4.6 was the last version for CS3), you are no longer a current customer.
You may not like the DNG Converter step, but that's what you have if you wish to use your new camera with your old software...your other alternative is, of course to simply use the software that came with your camera.

Similar Messages

New FocusTraversalPolicy Mechanism Does Not Work Well With OO Designs

I would like to complain about the new focus traversal mechanism not working well with object-oriented GUI designs.
Specifically, we have many reusable panel classes that can be swapped in and out of reusable dialog classes. On some of these panels, the default focus traversal is not what is desirable, perhaps because one component on the right side of the window is just slightly higher than a component on the left side, maybe due to the component on the right having a label on top, and so the default focus goes to the component on the right instead of the left. So we have a need to be able to explicitly define the order of components in some panels.
If I try to define a focus traversal policy in the panel's constructor, a NullPointerException is thrown because the panel's focus cycle root is null (the panel has not been added to any dialog or frame yet).
If I try to associate a focus traversal policy at the dialog level, it would have to explicitly reference its child panels' inner components, which would break the encapsulation of the panels. It would also make it hard to have generic dialog classes into which various reusable panel objects can be swapped.
Someone suggested making each panel a focus cycle root. This makes it hard to "break out" of one panel to move on to the next panel in the dialog. Special keys would have to be assigned to try to cycle out, and these keys would have to be different than the normal traversal keys, making them inconsistent and nonintuitive to the user. Also, the focus policy would have to know if the dialog had more than one panel, what order the panels were in to know whether to cycle to the next panel or not, etc. This is a mess.
Does anyone have any idea how to get around these problems? I have tried using a global focus policy with a global hash map of prev/next component key-value pairs, but we are still running into trouble with some deeply nested tabbed dialogs. It's just not possible to always have the focus cycle root in existence at the point where you want to explicitly define traversal between two components, or when you are trying to establish the default component for a panel in a tabbed pane.
Has anyone else run into similar issues?
Robbie Gilbert
[email protected]

I agree completely. One of the popular consultants on this forum stated that the new focus mechanism was more versatile and only a little more complex. I would say it's more than a little complex given the trouble average programmers are having understanding how it works...at least at first...and after understanding it realizing that they are going to have type their fingers off to update their code. Oh, and the dread of maintaining this awful mess.
I'm currently having the same problem as you Robbie. Some of my reusable panels need special tab ordering...that's not usually a problem, in most programming environments, till now. Now I have to go around the world and back just to get my stupid cursor to be in the right place when I hit the tab key??!!! and special key mappings just to get out of a focus cycle...lame.
And how is an IDE graphical designer going to work with this? It's not, that's how...ok maybe if some kind person or company creates a custom focus traversal policy editor of some kind, I don't know.
Good grief Sun! We need something to help us meet our deadlines, not solutions that force us to spend 80% of our time customizing every stinking bit of UI functionality we need!!!
JTables are even worse. I've mastered most of the garbage that is JTable after many months of pain and I don't know how I'm going to help my peers understand them in any short amount of time. Most of them were Oracle Forms programmers, not that that is any great solution either. But they will likely have problems.
In conclusion, I wish I had chosen another UI technology for our new product client, and may yet.

Help, my Bridge does not works well with my AfterEffect. does not preview .ffx files

Hi,
I have some problem with my Bridge. When i browse preset from my After Effect in Bridge, it won't preview all of the After Effect preset(*.ffx), but my Bridge works well with photoshop files, it will preview all the photo files inculding .PSD. Does anyone knows what's the problem? Anyone knows how to fix it? I need help to fix this problem to get my work in AfterEffect, it is very hard to get things work it won't preview the preset. Thanks.
Best Regrads,
Chongkkmy

Found this link, does it address your problem?
http://forums.adobe.com/click.jspa?searchID=769246&objectType=2&objectID=1794899

Mail does not work well with lion

Cannot shut off my computer because Mail does not close since i installed lion

Cannot shut off my computer because Mail does not close since i installed lion

After upgrade to version 20 of Firefox websites do not display anymore. Seems like v20 does not work well with ISA

After upgrade to version 20, we receive the following error when trying to open a website:
Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202)
Everything worked fine in the previous version of Firefox.

Found the fix for this:
Just set the following values to false in about:config.
network.automatic-ntlm-auth.allow-proxies
network.negotiate-auth.allow-proxies

Time Machine does not cope well with nearly-full disk

Although Time Machine is supposed to delete old backups when the disk fills up, under some circumstances it does not cope well with a disk-full condition.
Hardware: iMac (mid 2007)
OS: Mac OS X version 10.6.8 (Snow Leopard)
Processor: 2.8 GHz Intel Core 2 Duo
Memory: 2 GB 667 MHz DDR2 SDRAM
The other day I noticed that I had not had a successful Time Machine backup in over a day. Backups were taking a long time to run (4 hours or more), during which time the backup disk was chattering constantly and the disk showed "Estimating index time" in the Spotlight menu (even though I had excluded the disk from Spotlight indexing). When the disk finally stopped chattering, the backup finished with no visible errors but Time Machine continued to state that the last successful backup was yesterday. The backup disk was nearly full, but I had assumed that Time Machine was designed to cope with this situation by deleting old backups.
A complete annotated log file of the incident and my observations can be found here: http://bentopress.com/backup.log.zip
Here are some of the interesting entries from the system.log file:
Sep 7 16:22:14 Bento-iMac com.apple.backupd[56515]: Starting standard backup
Sep 7 16:22:14 Bento-iMac com.apple.backupd[56515]: Backing up to: /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:23:07 Bento-iMac com.apple.backupd[56515]: No pre-backup thinning needed: 100.0 MB requested (including padding), 137.2 MB available
Sep 7 16:25:49 Bento-iMac com.apple.backupd[56515]: Copied 32984 files (23.7 MB) from volume iMac HD.
Sep 7 16:25:53 Bento-iMac com.apple.backupd[56515]: No pre-backup thinning needed: 100.0 MB requested (including padding), 108.4 MB available
Sep 7 16:25:57 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk, very low disk
Sep 7 16:25:58 Bento-iMac mds[45]: (Normal) DiskStore: Rebuilding index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:25:58 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk
Sep 7 16:25:59 Bento-iMac mds[45]: (Normal) DiskStore: Creating index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:00 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk, very low disk
Sep 7 16:26:00 Bento-iMac mds[45]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/My Backup Disk" because it is low on disk space.
Sep 7 16:26:02 Bento-iMac mds[45]: (Normal) DiskStore: Reindexing /Volumes/My Backup Disk/.Spotlight-V100/Store-V1/Stores/35367D91-8096-4D43-802B-A8658DBAB581 because no basetime was found.
Sep 7 16:26:02 Bento-iMac mds[45]: (Normal) DiskStore: Rebuilding index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:04 Bento-iMac mds[45]: (Normal) DiskStore: Creating index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:14 Bento-iMac com.apple.backupd[56515]: Error: Flushing index to disk returned an error: 0
Sep 7 16:26:14 Bento-iMac com.apple.backupd[56515]: Copied 776 files (17.3 MB) from volume iMac HD.
Sep 7 16:26:15 Bento-iMac com.apple.backupd[56515]: Backup canceled.
Note the "error: 0". Error code zero normally indicates success.
There were also many, many, many copies of the following message, which occurred while Spotlight was trying to index the backup disk:
Sep 7 17:28:40 Bento-iMac com.apple.backupd[58064]: Waiting for index to be ready (100)
Here's what I think is happening: at the very end of the backup, after the files have been copied to the backup disk, mds resets indexing because the disk is now full. backupd's attempt to flush the index to disk then fails because indexing is suspended (error zero), so the backup is canceled. I suspect that this may occur when the new backup and the old one(s) being deleted are both small enough that the disk "packs" tightly, leaving no room for the index. If a large (>500MB) old backup had been deleted to make room for a small (<100MB) new one, the problem would not have occurred.
I worked around the problem by switching Time Machine from the full disk to my Time Capsule. (I did not have this system backing up to the Time Capsule originally because I purchased the Time Capsule later for a different system.) The downside of this is that I lost access to older backups (though they are still accessible by right-clicking on Time Machine in the dock and selecting "Browse other Time Machine disks..."—however, I have not actually tried this). I'm also not completely happy having both my main systems backing up to the same hardware, but everything seems to be working well at this point and I do have a secondary backup system, using SuperDuper to clone the systems' disks to an external HD, which I do about once a month.
Although I have worked around the problem, I am posting this in the hope that it will be useful to someone else, in the hope that someone at Apple will notice and perhaps improve the performance of Time Machine in this situation, and also in the hope that someone can suggest a solution that does not involve throwing a bigger disk at the problem. Is there any way to free up space on Time Machine's backup disk, for example by manually pruning older backups, either through Time Machine itself or via the Finder or command line?

If you suspect that the disk being full is the problem, have you tried deleting some of the old backup data on the TM disk?
When in TM, go back to the past a long way, right click on a file/directory and select "delete backup". Do this on some big files you have (so that you get more space per removal) that you change all the time (so you'll still have recent backups).

Does Lightroom work well with hiDPI Windows 8.1 touchscreen ultrabooks?

Hi all,
My old laptop is on the fritz, shopping for a new one.
Apart from the Web, the application I use the most is Lightroom.
I've been interested in the nice new ultrabooks, but I'm wondering: does Lightroom work well with hiDPI Windows 8.1 touchscreen ultrabooks?
Is hiDPI advantageous, or actually annoying?
What can you actually use touch for in Lightroom, and does it improve your workflow?
Thanks kindly!

I am not 100% sure whether lightroom supports HiDPI on windows but on Mac OS X it is absolutely fantastic (I use a retina MBP). So I would see if you can try it out somewhere. My guess is that Lightroom supports it on Windows too and then I can highly recommend it.
No clue if touch works well or not for Lightroom. My guess is not as almost always using touch in applications that were not designed for it is very kludgey.

HT4061 If my flash does not work well will Apple fix it

My iPhone camera flash does not work well, will Apple fix this tin store?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I have aMacBook Pro with Mountain Lion operating system. Does MacKeeper work well with this Operating System

I have a MacBook Pro with Retina Display. My operating System is Mountain Lion 10.8.5 Does MacKeeper work well with Maontain Lion 10.8.5 and provide good Virus protection? Appreciate the support.

The Hatter:
Thanks for the input. So far the responses I've received are all the same. I will not be purchasing MacKepper.
Beracha007

Safari 5.1.1 I no longer have access to my bookmark folders, just a search that does not work well. How can I retrieve access to bookmark folders?

OS 10.6.8 Safari 5.1.1 I no longer have access to the bookmark folders. There is just a search function that does not work well. Is there any way to get access back to my bookmark folders?

This site didn't say anything about one wrong ID, but only talks about changing the Apple ID. If it didn't work the first time why should it work now?

Why ps3 is not working well with airport

why ps3 does not work well wth the airport?

If you are referring to online gaming, then PS3 like all non-apple devices uses upnp to open ports.
Apple uses NAT-PMP to open ports.. East and West.. never the twain shall meet.
If it is internal wireless issues.. that is different.. airport should be just like any other wireless router.
If you tell us the issue we have more hope to help.

Can I get an older release of Firefox? 36.0 does not play well with Windows 7.

Firefox 36.0.4 does not play well with Windows 7. If it opens at all, it freezes within a minute so the screen goes pale and I get the classic spinning circle of death. Then the header says (not responding).
Ideally I would like to drop back to version 32 or 33, but 34 and 35 had fewer problems.
Can I find older versions anywhere?

You can [[Install an older version of Firefox]] any time. But which will cause significant security risk. So If you can't use the latest version of Firefox, we recommend that you use the latest version of another browser.
If the latest version of Firefox is causing problems for you or you just don't like something about it, please give us feedback about it here:
[https://input.mozilla.org/en-US/feedback/ Submit your feedback and suggestions about Firefox]
Anyway head for the ftp for older version but please be careful with these: ftp://ftp.eu.mozilla.org/pub/firefox/releases/

Hi, My iPhone 4s does not work properly with the sound.

Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

My iphone 5 does not work properly with Ford Sync,

Hi, My iphone 5 does not work properly with Ford Sync, everytime I pair the phone, Ford sync navigation system freezes and does not work !
Can someone help.

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

TA48312 now my iphone4 version is 6.0.1, personal hotspot does not works well as before, so i want to upgrade back to the old version 4.3.5,please help me

now my iphone4 version is 6.0.1, personal hotspot does not works well as before, so i want to upgrade back to the old version 4.3.5,please help me.

Downgrading is Not supported by Apple.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743

DNG 5.4 does not work well with Olympus E-620

Similar Messages

Maybe you are looking for