Dng and CR2 files display as icons in CS5

Now I have installed CS5 on three machines - a new installation on WIN7, and here everything is alright - no problem!
Two machines running XP wth a previous CS4 installation uninstalled show up in Bridge with this problem:
dng and CR2 files display as icons!!
Everything is updated, ACR plugin placed as should be, and Camera RAW is working fine when OPENING the file. It is only a display problem, but this is serious enough - you cannot go through your downloaded pictures.
I have tried to follow a solution close to the one given for CS4:
http://kb2.adobe.com/cps/407/kb407945.html
but I am out of luck.
Is it an XP problem, or has it something to do with the previous installation of CS4?
Any suggestions will be great! I have searced, read, tried, searched, tried.... some share this problem, but I haven't seen any soloution.
Thanks, Jan

Disclaimer: The following applies to WINDOWS EXPLORER. I don't use Bridge so I don't know if it's applicable at all to Bridge.
Adobe does not provide a codec for viewing Canon raw files as thumbnails. Canon has one for free but it only works on a 32 bit Windows system.
Early this year I found a free download for displaying raw file thumbnails that works on an x64 Windows system. Since that time the author realized there's a real demand for this software and has started charging for it. In any case, I find it works very well.
http://www.fastpictureviewer.com/codecs/
-Noel

Similar Messages

Windows 8 Elements 11 Problem with DNG and CR2 files

Have a Windows 8 machine with Elements 11 which has Camera Raw 7.4 installed and showing correctly in the editor. The Browser shows thumbnails of the DNG and CR2 files, but when an attempt is made to edit them, the editor opens but does not open the file. Same thing happens if I try to open the file using the File Open from the menu.
Also I have been through the help and forums and found an article about opening jpeg files as Camera Raw files (http://blogs.adobe.com/pselements/open-jpeg-files-in-adobe-camera-raw-in-photoshop-element s/) and this does not work either.
Help please !

Disclaimer: The following applies to WINDOWS EXPLORER. I don't use Bridge so I don't know if it's applicable at all to Bridge.
Adobe does not provide a codec for viewing Canon raw files as thumbnails. Canon has one for free but it only works on a 32 bit Windows system.
Early this year I found a free download for displaying raw file thumbnails that works on an x64 Windows system. Since that time the author realized there's a real demand for this software and has started charging for it. In any case, I find it works very well.
http://www.fastpictureviewer.com/codecs/
-Noel

In PSE 13, when I open a folder, jpeg files have a preview image, but PSD, DNG and CR2 files don't. Also, no thumbnail below the file list.

Working in PSE 13, when I open a folder, jpeg files have a preview image, but psd files just have white sheet of paper as preview. I have to open the file to be able to see it. Also, there is no thumbnail of the file below the file list.Surely, there's a setting that needs to be changed. I did not have this problem with Elements 12. This is a real bother because I have to use Lightroom to see all the file types. It seems as if Elements is using the standard Windows file loader that can't show previews of file types it doesn't know including .PSD, DNG and CR2. Is that a bug or did I do something wrong? Thanks for any help.

I am using Windows 7 64 bits. Working in the editor, I never use the organizer. The screen above is not the same at all that I got in Elements 12, it was completely different and showed me a thumbnail below the listing when I single clicked on one of the files. In Elements 12, I also could see a thumbnail of all the file types, not only the jpegs. It is as if the loader is the regular Windows used anywhere, not the right one for Elements. I hope someone understands my problem.. Thanks.
Mike

Stacking of DNG and CR2 files

When creating DNG files, I prefer to leave the CR2 files in the same directory and not embedded in the DNG files.
This prevents the DNG files from doubling in size and thus prevents them from taking twice as long to open/read/write/etc.
However, LR does not recognise IMG_1234.DNG and IMG_1234.CR2 as being the same like it does IMG_1234.CR2 and IMG_1234.JPG.
It would be nice for it to automatically stack photos like this:
DNG
CR2 (or other native raw)
JPG

I doubt many use the same schema for both DNGs and RAWs in the same folder. For one, it'd be too easy to in some cases edit the RAW, and others editing the DNG. One reason I never shoot RAW + JPEG; having all three would be unworkable for me.

Dng and tif file with the same name, in the same Lightroom folder

If I have both a dng and tif file with the same name, in the same Lightroom folder, I can only see and access one of them. Is there a setting I can change in order to see both of them?

If you can only see one of them, which one can you see?
Was the DNG and the TIF imported at the same time?
How are you trying to "access" the files?
The more details you can provide, the more likely it is that someone will be able to help you.

DNG Copnverter and CR2 files

I have a new Canon 60Da and an old Photoshop CS4 which requires that I use DNG Converter to convert my .cr2 files to DNGs for access. I'm using version 7.4 of the converter, just downloaded and installed on a WinVista 64 machine. If I open the converter and browse to select images the converter refuses to acknowledge any folders as containing .cr2 Canon raw files. It continually reports zero files selected. There is nothing wrong or unusual with the path to the folder.
I am able to drag and drop up to about 25 files onto the shortcut icon on my desktop and the converter opens up and converts them. I can also drop a folder of files onto the icon with success. If I drop >25 files onto the shortcut I get a fatal error message: "C:\Program Files(x86)\Adobe\Adobe DNG Converter.exe The data area passed to a system call is too small."
From the forum it appears that this was a problem back in mid-2011 so I guess I shouldn't expect any joy from Adobe. Even aside from the fact that failing to support new cameras in ACR can only be explained as either incompetent programming or a conscious business decision to 'encourage' people to upgrade to later Photoshop versions.

When using the DNG converter to select your images, you cannot choose individual images or groups of images. You can only choose the folder that contains raw images. The DNG converter will not list actual files. Only the folder that contains the files. If you want to convert individual images you have to use that drag/drop method.

Viewing dng and jpg files

How do you get LR4 to display both dng and jpegs seperately instead of as dng + jpg with the same file name.

Disclaimer: The following applies to WINDOWS EXPLORER. I don't use Bridge so I don't know if it's applicable at all to Bridge.
Adobe does not provide a codec for viewing Canon raw files as thumbnails. Canon has one for free but it only works on a 32 bit Windows system.
Early this year I found a free download for displaying raw file thumbnails that works on an x64 Windows system. Since that time the author realized there's a real demand for this software and has started charging for it. In any case, I find it works very well.
http://www.fastpictureviewer.com/codecs/
-Noel

I have just downloaded camera Raw 8.8 to my computer that runs Photoshop CS6 for my Canon 7D Mark II. CR2 files appear as Icons instead of thumbnails. Does anyone know a fix

Is there a way for CR2 files that are downloaded to Bridge running CS6 to appear as thumbnails rather than Icons in Bridge

rhobbs713 wrote:
Is there a way for CR2 files that are downloaded to Bridge…
You don't download anything "into Bridge". Bridge is a just a File Browser, you put your image files wherever you want and you point Bridge to whatever folder you put your raw CR2s in.

Photoshop Elements 9 and CR2 files.

I have Photoshop Elements 9.0.3 on a Windows 7 laptop and I can't open CR2/RAW files. Is there something I can do to open CR 2/RAW files in PE9?

You need camera raw 7.3 for your camera. It is only compatible with PSE11 to 13. Alternatively, download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.6
Mac download (.dmg file) click here DNG Converter 8.6
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

How can I retain the attached .pdf files (displayed as icons) from my word file 2010 to a pdf file?

Hi everybody,
I have looked for an answer in this forum ... without any good result.
I worked on a Word 2010 file with some attached pdf files. These attached files are displayed as icons on the word file. If you double click on them, you can consult them. This works very good.
Problem: I would like to convert this word 2010 file into a pdf file, which keeps the icons (linked to attached files) active. If I "pdf" this with my current system, icons are displayed as pictures: I cannot open the attached files.
My question is very simple: is it possible to retain these active icons (= to open attached documents) in a pdf file? Which adobe package should I use?
Many thanks for your help
cheers
elgreengo

No, it's not possible, but I agree it would be a very nice feature.

Raw and CR2 files won't sort by time

I recently shot a wedding with my Nikon while my second shooter shot with her Canon. We made sure the times were the same so that Lightroom could work its organization magic. After I uploaded them, the CR2 files showed up above the Raw files. All of the images are in one folder and I have it set to Sort by Capture Time, but they will not mix together according to their times.
When I uploaded my Nikon images I realized that my year was off. It was set to 2010 instead of 2011, so I changed the metadata accordingly and it changed to the correct year for all of my Nikon images. I uploaded the Canon images after that incident, but they still won't sort by time. Do you think that metadata change has something to do with the images not mixing together or it is the file names?
There are about 1400 images all together it will be quite an exhausting experience to have to organize them myself. So I would definitely appreciate some help!
Thanks!!
Ruth

Check the timezone of each filetype.
The US is several hours behind GMT so if the corrected NEFs are GMT-relative while the CR2s are US-time-zone-relative that could explain the issue, or maybe one camera had timezones set on it and one didn’t and the difference has nothing to do with the metadata correction you did.
Did your metadata correction update the headers of the RAW files, themselves, or just LR’s internal information in its database and/or XMP files?
If the RAW files were modified, check the timestamps with EXIFtool:
http://www.sno.phy.queensu.ca/~phil/exiftool/
If only the LR-stored metadata was modified, not the RAW files, themselves, then create an XMP file for one CR2 and one NEF taken about the same time, using Metadata->Write Metadata to File(s), and examine the two XMP files in a text editor to see what the timestamps and timezones say.

Drag and Drop Files Onto EXE Icon

I was wondering if there is a way to have the user drag and drop files onto the .exe icon and this would initiate the program to do something with those files automatically?
For example: Some PDF convertor programs allow you to drag and drop documents, images, etc. directly onto the PDF convertor icon on your desktop and it will automatically convert them all to PDF's, without the user even having to open the program.
Can this same type of functionality be done with a Labview EXE file?
Solved!
Go to Solution.

Thank you! That did it.
The only side note that I would include to others that are trying this is to make sure you have the "Pass All Command Line Arguments to Application" box checked in the "Advanced" section when you build the executable.

Sharing to FB and CR2 files

Hi all, thanks in advance this website is such a great resource to have questions answered!
Running PSE9, Win7, Canon 1100D with CR2 raw format, facebook.
I shoot in raw and work with my photos in the organizer in raw, only changing format when neccessary for output.
When I do edits in raw such as exposure, crop, WB, recovery, these edits are reflected in my organizer previews 100% of the time.
If i take a raw photo that was cropped, recovered, exp. adj. etc from the organizer and share to Facebook I have found once
the photo appears on FB it does not always reflect my raw edits. I find it to be unreliable, some edits go through to the web
other ones do not with no predictable pattern or rule.
Taking my edits and saving as JPEG guarantees they will show up as I want when shared to FB however this adds an extra
step to my workflow and takes up more memory having version sets which I would prefer to avoid.
Can anyone offer any insight here? I have looked the the PSE9 user guide, aftermarket PSE9 books, facebook help, and there
doesn't seem to be anything out there detailing the sharing to Facebook.
Thanks again!

As long as the XMP files are intact along side the CR2 files then All of the Edit adjustments should be available.
The only difference I could think of would be if you click the open image button in Camera Raw to send an image for further editing in Elements Full Photo Edit as 16 bit.

Linking adjacent JPG and CR2 files

Most of my folders treat adjacent JPG and CR2 as one file when viewing in Lightroom. However, I have one folder that for some reason treats them as two photos—they are not linked together. How can I fix the photos in that folder so the adjacent JPG and Raw files can be viewed as a single photo?
Thanks for any help.

Thanks. I tried that with stacks at 1 second and then collapsed stacks and it worked well. However, what shows up now is the JPG. How can I have the Raw CR2 show up on top of each stack?
Skye

CS6 and CR2 files.

Hello, I've just recently switched from CS5 to CS6. I am also shooting with a new 5D Markiii. I'm still shooting in raw but when I pull my images thru Bridge it shows a CR2 file. I can't pull those images into Camera Raw or photoshop. I checked to make sure my updates were up to date, and they are. I'm not the most savy computer person in the world but clearly I'm missing something. Can someone help me? Please!

Photoshop CS6 come with ACR 7.0 which does not support Cannon D800. So, you need to update to ACR 7.1
http://labs.adobe.com/technologies/cameraraw7-1/

Dng and CR2 files display as icons in CS5

Similar Messages

Maybe you are looking for