DNG cannot convert ORF from Olympus E 510

I have a Olympus E 510. My RAW files are ORF.dn G converter don't suppurt ORF or what do I do?
Leif

The DNG converter does convert ORF files from Olympus cameras. That camera has been supported for years. What makes you believe that you can't convert those files?

Similar Messages

ORF from Olympus C-5060WZ is not supported

I've found out that although Aperture supports RAW files from Olympus C-7070WZ, it does not support Olympus C-5060WZ. And that's a big issue for me, because I have a lot of ORF pictures from this camera. Is there some workaround for this? Or maybe I can hope that support for my camera will be added in the future?

Sorry to be the bearer of bad news, but I don't think realistically one would expect Apple to support your C-5060WZ. I say that for a number of reasons.
First, people are clamoring for support of a variety of very popular new cameras. Apple has been slowing in coming with those, so it would surprise me to see them go back and support older cameras that are not currently supported. I think the 5060 was released in '03. 5 years is a long time in the digital photography world.
Second, the history of updates tends to ignore cameras that are not leaning more towards the professional side of things, though there are exceptions. There are a lot of great cameras they could support, but have chosen not to since day one.
Finally, Apple communicates nothing to its customers about its plans. Frustrating, but that's the way it works at Apple.
You really have no way of knowing for sure, but chances are very slim. If you really need raw support for the 5060, then you should investigate other products.
Good luck,
Roy

Can't open .orf RAWs from Olympus E-510 - how to install camera-raw?

Hi
i'm new to adobe photoshop cs3 and just wanted to try opening my
RAWs from my olympus.
Adobe always says it can't open these files.
i have already downloaded the "camera raw.8bi" but do not know how to use it.
i tried to give adobe a new plugins-folder but it seems not using it.
any help?

The installation instructions are on the page from which you downloaded it... They do change occasionally, so it's a good idea to pay attention to them.
Cheers,
Art

Officejet 6000 e609n cannot convert to from USB to wireless

I am attempting to convert the connection to my Officejet 6000 E609n printer from USB to wireless (XP Pro SP3). After going to the HP icon on my Application Menu and navigating to the “Configure Wireless Settings” the following sequence of events occur: 1) A window with the title “Installing Officejet 6000 e609n” opens. As it opens the progress bar shows set 3 of 4. 2) A window titled “Network Setup” opens with an instruction “Temporarily connect the printer to your computer using a USB cable.” A box in the lower left corner of the window is to be checked if you printer is already connected via USB cable. (Mine is, and has been for some time.) 3) After checking the box and pressing NEXT, another window opens to select the printer being installed. The HP Officejet 6000 e609n series is the only printer listed. I select it, and press Next.) This message comes up: “Selected printer is not present. Please connect the printer and press Retry or press Cancel to select another.” I then cancel my way out of setup. I can print a test page and other jobs from the computer via the USB connection – no problems. What could be causing this? FYI I have gone thru the reset routine, no change. I could not find a similar situation on the wireless printer forms.

I am having the same prob. No resolve yet.

Cannot convert podcast from aac to mp3 in iTunes

I've downloaded the Mac Format podcast (auto link into iTunes) which is in acc format and right clicked it to select convert to mp3 as I want to burn to a disk (don't have an iPod - yes I know I'm the only one!) The progress bar shows the conversion taking place however once it has completed the file is still in acc format. How do I actually get it into mp3?

madking wrote:
iTunes automatically turns both AAC and MP3 into a different file type when burning on a Cd,
Clarification... when burning an AUDIO CD. You can burn data and MP3 CDs in iTunes as well.
madking wrote:
known as AIFF files. These AIFF files are playable by 99% of cd players, so you don't have to convert anything.
No, to nitpick, they are not in AIFF format but instead they are in Compact Disc Digital Audio format, aka "Red Book". When you put a CD into a Mac, it just shows them as AIFF files but they aren't until you actually copy them to your computer.
Patrick
(now Chris CA should be along shortly to get on me for that last boring bit since I just gave him a hard time about the same sort of correction to one of my posts)

Would some kind soul convert this from lv 5.1 to 8.0+?

Hi Guys,
I'm running LV8.5 and it says that i cannot convert this from 5.1. Could someone convert it for me and post it?
http://www.lauwers.com/lv.htm
It's the Labview Toolbox that i'm after.
Thanks.
Phil

Why aren't you trying to use the LV 6.0 version?

Why will CS4 not open DNG files converted from Olympus E-M1 raw files?

For several years I have been able to use the DNG Converter to convert .ORF raw files from my Olympus E-M1 and then open them for processing in CS4. Suddenly CS4 quit recognizing these DNG files saying "Photoshop could not complete your request because Photoshop does not recognize this type of file"
I have not changed any preferences. I'm using E-M1 v3.0, DNG Converter v8.3.0.141 on a Mac. I have deleted DNG converter several times, even reinstalled an earlier version but nothing changes.
However, CS4 will open DNG files converted from Pentax raw .PEF files from my K-5. Weird. It's the Olympus raw DNG conversions that won't open.
I can view the DNG converted files in question in Mac's Preview just fine but not CS4. Any ideas will be appreciated.

Be sure the DNG Converter's compatibility is set to provide support for your version of ACR:
Benjamin

Can iphoto handle /convert ORF files from my Olympus OM-D E-M5

Can my imac handle/convert ORF raw files from my Olympus OM-D E-M5?

That of cource depends on details that you do not provide
The general answer is Yes providing that you have Mountail lion and iPhoto '11 version 9.4.3
see
http://support.apple.com/kb/HT5371?viewlocale=en_US&locale=en_US
LN

LR4.4: Cannot open Raw files from Olympus OM-D E-M1 [was:Adobe lightroom.]

Just bought a new cámara olympus OM E-1 and find that I can not download my fotos with
Lightroom 4.4. Lightroom does not accept the format ORF. any help please!

Thanks John you have been a great help! I will see what suits me best!
Enviado desde mi iPad margaret.
El 09/11/2013, a las 07:33, John Waller <[email protected]> escribió:
Re: LR4.4: Cannot open Raw files from Olympus OM E-1 was:Adobe lightroom.
created by John Waller in Photoshop Lightroom - View the full discussion
DNG Converter.
Read all about it here
http://www.adobe.com/products/photoshop/extend.displayTab2.html
It's a way of opening the Raw files from your OM-D EM-1 without having to upgrade to LR5.
In short, you open the Raw files from the camera uing the DNG converter, convert the Raw files to DNGs. Then you edit the DNG files in LR4.4.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5828160#5828160
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5828160#5828160
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5828160#5828160. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Olympus E-P1: Strange pattern in DNG files converted for Photoshop CS3

I converted some of my .ORF files to .DNG to use in Photoshop CS3 and there is some strange pattern appearing on overexposed parts of the picture.

Hi, Beat:
Thanks for your offer.
Here you are a link to _B101110.ORF from my E-P1 for anyone who wants to try.
http://rcpt.yousendit.com/774955242/335db3525082f217660b3c7c3591df91
How can I create a DNG profile for my E-P1?.
Saludos,
Juanlu

Raw converter DNG 8.3 cannot convert with canon s120

I could convert my CR files (canon raw files) from my Canon Camera S120 after the first time. But when I used the DNG converter the next day, it cannot convert my CR files although the DNG main menu appeared but I cannot type in instructions from step 1 to step 4
Can anyone help

Right, ACR 8.3 is for cs6 and cc; it will not work as a plugin update in CS5. You should download the 8.3 DNG converter stand alone program from
http://www.adobe.com/downloads/updates.html
then use it to convert folders of your new S120 cr2 raw files to folders of dng files, which can be processed in your cs5 by acr 6.7 (latest cs5 release).

RFC Function Error: Cannot convert a value of 'MM/DD/YYYY' from type java.l

hi experts,
iam calling an RFC using SAP_JCO_Function. one of the input parameters is date which shud be in the format 'MM/DD/YYYY' but when i create a transaction property of data type DATETIME the format changes to " 2007-06-21 14:31:50 ". to refrain form passing this value at run time i have defined the transaction property as string and defaulted the value to MM/DD/YYYY.
When i execute the RFC i get the error "Cannot convert a value of 'MM/DD/YYYY' from type java.l".
Issue is with time field as well. Any suggestions would be appreciated.
Thanks,
Avinash

Hi
You can use datefromxmlformat( datetime, toformat ) .
in toformat you give: "MM/dd/yyyy" and in datetime you pass your xml format date like: 2007-06-21 T14:31:50.
Try like this. Hope this may help you.
Thanks

Cannot Convert standby database from snapshot to physical

Hello all,
I am using Oracle Entreprise version 11gR1 and had made the followings configuration:
- ANAISMD2 : primary database+_+
- ANAISMD3 : physical standby datbase. Created via RMAN
Both are located on the same host running a RH 4.
ANAISMD3 is maintained successfully with the primary.
I can make a fail-over between the both: it works fine.
I can convert ANAISMD3 from physical to snapshot via DGMGRL: it works fine
But I cannot convert back ANAISMD3 to physical, got an error ORA-12514
I had checked also the listener service for both ANAISMD2/ANAISMD3 before launching the conversion:
- the services shown on ANAISMD3 seems correct e.g. ANAISMD2 is seen as a remote server.
- but on ANAISMD2, ANAISMD3 seems incorrect e.g. ANAISMD3 is seen as a local server.
I had attached some screen shots of dg/lsnrctl results;
What are the mistakes
Thank in advance for support
==> Before I made the conversion , DGMGRL shows correct primary/standby status:
DGMGRL for Linux: Version 11.1.0.6.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys/oracle@ANAISMD2
Connected.
DGMGRL> show configuration
Configuration
Name: ANAIS
Enabled: YES
Protection Mode: MaxPerformance
Databases:
ANAISMD2 - Primary database
ANAISMD3 - Snapshot standby database
Fast-Start Failover: DISABLED
Current status for "ANAIS":
SUCCESS
==> When I want to convert back ANAISMD3 to physical, I got the following errors from the listener:_
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys/oracle@ANAISMD2
Connected.
DGMGRL> convert database 'ANAISMD3' to physical standby;
Converting database "ANAISMD3" to a Physical Standby database, please wait...
Operation requires shutdown of instance "ANAISMD3" on database "ANAISMD3"
Shutting down instance "ANAISMD3"...
Database closed.
Database dismounted.
ORACLE instance shut down.
Operation requires startup of instance "ANAISMD3" on database "ANAISMD3"
Starting instance "ANAISMD3"...
Unable to connect to database
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Failed.
You are no longer connected to ORACLE
Please connect again.
Unable to start instance "ANAISMD3"
You must start instance "ANAISMD3" manually
Failed to convert database "ANAISMD3"
DGMGRL>
==> Here ist he listener.ora_ (I put the same for both ANAISMD2/ANAISMD3 with port 1541/1551). Note: DGB is the accepted extension for dgmgrl service (instead of DGMGRL as mentionned in documentation).
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL=TCP) (HOST=rh4-2a) (PORT=1541))
TRACE_LEVEL_LISTENER = ADMIN
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME=/home/oracle/product/11.1.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = ANAISMD2)
(GLOBAL_DBNAME = ANAISMD2.world)
(ORACLE_HOME=/home/oracle/product/11.1.0)
(SID_DESC =
(SID_NAME = ANAISMD2)
(GLOBAL_DBNAME = ANAISMD2_DGB.world)
(ORACLE_HOME=/home/oracle/product/11.1.0)
(SID_DESC =
(SID_NAME = ANAISMD3)
(GLOBAL_DBNAME = ANAISMD3_DGB.world)
(ORACLE_HOME=/home/oracle/product/11.1.0)
(SID_DESC =
(SID_NAME = ANAISMD3)
(GLOBAL_DBNAME = ANAISMD3.world)
(ORACLE_HOME=/home/oracle/product/11.1.0)
==> Here is the tnsnames.ora (I put the same for both ANAISMD2/ANAISMD3 with port 1541/1551).
ANAISMD2.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = rh4-2a)(PORT = 1541))
(CONNECT_DATA =
(SERVICE_NAME = ANAISMD2_DGB.world)
ANAISMD3.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = rh4-2a)(PORT = 1551))
(CONNECT_DATA =
(SERVICE_NAME = ANAISMD3_DGB.world)
==> Here is the sqlnet.ora (same on both):
TRACE_LEVEL_CLIENT = OFF
DIAG_ADR_ENABLED=FALSE
DIAG_DDE_ENABLED=FALSE
DIAG_SIGHANDLER_ENABLED=FALSE
names.directory_path = (TNSNAMES)
names.default_domain = world
name.default_zone = world
==>
==> List of services provided by the listener of ANAISMD2:
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 10-AUG-2009 16:39:36
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=rh4-2a)(PORT=1541)))
Services Summary...
Service "ANAISMD2.world" has 1 instance(s).
Instance "ANAISMD2", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
+"DEDICATED" established:0 refused:0+
LOCAL SERVER
Service "ANAISMD2_DGB.world" has 1 instance(s).
Instance "ANAISMD2", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
+"DEDICATED" established:3 refused:0+
LOCAL SERVER
Service "ANAISMD3.world" has 1 instance(s).
Instance "ANAISMD3", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
+"DEDICATED" established:0 refused:0+
LOCAL SERVER
Service "ANAISMD3_DGB.world" has 1 instance(s).
Instance "ANAISMD3", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
+"DEDICATED" established:0 refused:0+
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
+"DEDICATED" established:0 refused:0+
LOCAL SERVER
The command completed successfully
==> List of services provided by the listener of ANAISMD3:
Services Summary...
Service "ANAISMD2.world" has 2 instance(s).
Instance "ANAISMD2", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "ANAISMD2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
REMOTE SERVER
(ADDRESS=(PROTOCOL=TCP)(HOST=rh4-2)(PORT=1521))
Service "ANAISMD2_DGB.world" has 2 instance(s).
Instance "ANAISMD2", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "ANAISMD2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
REMOTE SERVER
(ADDRESS=(PROTOCOL=TCP)(HOST=rh4-2)(PORT=1521))
Service "ANAISMD2_XPT.world" has 1 instance(s).
Instance "ANAISMD2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
REMOTE SERVER
(ADDRESS=(PROTOCOL=TCP)(HOST=rh4-2)(PORT=1521))
Service "ANAISMD3.world" has 1 instance(s).
Instance "ANAISMD3", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "ANAISMD3_DGB.world" has 1 instance(s).
Instance "ANAISMD3", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully

You need to have static service registered with listener in this way. This is must because as you know when it converts db that time it shutsdown dbs also so all dynamic services are lost and dgmgrl is not ale to connect to db hence conversion fails.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = ORACLE_SID)
(GLOBAL_DBNAME=db_unique_name_DGMGRL.db_domain)
(ORACLE_HOME = /apps/oracle/product/11.1.0)
Plus with this make a entry in tnsnames.ora using service name from above or check from lsnrctl status look for service "db_unique_name_DGMGRL.db_domain"
e.g. this is my best practice how i give the names to tns entry
db_unique_name_DGMGRL =
(DESCRIPTION =
(SDU = 32767)
(ADDRESS = (PROTOCOL = TCP)(HOST = hostname)(PORT = port))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = db_unique_name_DGMGRL.db_domain)
Define same way in both primary and standby db.
Now use these tns entries to create configuration.
e.g.
create configuration prim_db as primary database is db_unique_name connect identifier is "db_unique_name_DGMGRL";
-- db_unique_name_DGMGRL from primary tns entry
add database stdby_db as connect identifier is "db_unique_name_DGMGRL" MAINTAINED AS PHYSICAL;
-- db_unique_name_DGMGRL from standby db tns entry
hope this will help

Cannot convert from java.util.Date to java.sql.Date

In the below code am trying to get the current date and 60 days prior date:
Date todayDate;
          Date Sixtydaysprior;
          String DATE_FORMAT = "MM/dd/yy";
          DateFormat sdf = new SimpleDateFormat(DATE_FORMAT);
         Calendar cal = Calendar.getInstance();
          todayDate = sdf.parse(sdf.format(cal.getTime()));
          cal.add(Calendar.DATE, -60);
         Sixtydaysprior = sdf.parse(sdf.format(cal.getTime()));I have imported following files:
<%@page
     import="java.util.Calendar,
               java.text.SimpleDateFormat,
               java.text.ParseException,
                        java.util.*"
%>Shows up following error msg:
Type mismatch: cannot convert from java.util.Date to java.sql.Date
Thanks.
Edited by: MiltonDetroja on May 22, 2009 11:03 AM

Shows up following error msg:
Type mismatch: cannot convert from java.util.Date to java.sql.Date
I don't think this exception is thrown from the portion of code you have shown. As clearly specified in exception message, you cannot cast an instance of java.util.Date to java.sql.Date. you will need to do something like this
java.util.Date today = new java.util.Date();
long t = today.getTime();
java.sql.Date dt = new java.sql.Date(t);

Cannot convert parameter 1 from 'InterfacePtr IFace ' to 'const IPMUnknown *'

Hello,
I am getting this error when trying to get a interface pointer through another interface. how to solve it? Do any one have any idea?
cannot convert parameter 1 from 'InterfacePtr<IFace>' to 'const IPMUnknown *'

Hi there.
I've had this problem a few times, but with other interfaces. What I do - but I don't know if this is the right way to do... It works, though :) - I cast it to IPMUnknown*.
For example:
InterfacePtr<IPageList> iPageList((IPMUnknown*)document, UseDefaultIID());

DNG cannot convert ORF from Olympus E 510

Similar Messages

Maybe you are looking for