DNG changes made in LR4 not visible in LR3

I am working on a MacBook Pro with both Lightroom 3 and Lightroom 4 installed. I wanted to test my assumption DNG is a DNG and that changes made to a DNG in LR4 would be visible in LR3, so I made changes to a DNG in Lightroom 4, clicked Update DNG Preview and Metadata and then exported that file as a DNG. I imported that DNG into a different Lightroom 3 catalog and the changes were not visible, even after choosing Read Metadata from File. Those same DNG changes were not visible in Bridge either. The changes are visible in the Finder, but not in Preview. Anyone know why and how I can make Lightroom 3 recognize the DNG changes made in LR4?

Your DNG is original-image-data + an adjustment recipe stored as metadata that tells LR how to display and export the image.  Your DNG does not contain adjusted image data like a TIF or JPG would. 
Your adjustments are probably in Process Version 2012, new to LR4, and only understood by LR4 and ACR 6.7/ACR 7.x and newer.  The embedded JPG preview in the DNG is what LR4 put there.
There is a difference between a DNG being understood as a valid raw file by older Adobe products which it can, and those older products knowing how to interpret the adjustment recipe, which they can’t. 
Specifically, LR3 doesn’t know how to interpret PV2012 adjustments, since it was last updated in 2011 and only knows about PV2010 and earlier.
Other non-Adobe programs, like Finder, can only see the embedded JPG preview which is the LR4 rendering, but LR3 re-renders the image using its own interpretation of the settings it can understand.

Similar Messages

  • Change on process chain not visible in display mode after transport

    All,
    We have changed a process chain where message notification was active in development.
    We have deleted the notification and created a transport. This has been released and implemented into the QA system without a problem.
    When displaying the new process chain in QA the change was not visible. But in change mode it is.
    Can anyone tell us what might be a cause/solution for this? Also for future changes.
    Gui error??
    Thanks in advance.

    hi,
    Try activating the PC again in the QA.
    if still it does reflect the message notification, then try creating the request again
    in DEV and transport.
    make sure you r out of the Process chains in DEV nad QA when transport happens.
    This is just a practice.
    Regards,
    Dhanya.

  • CHANGES MADE IN ECC NOT GETTING REPLICATED TO CRM - CUSTOMER

    Hi All
    We are currently working on CRM 4.0 connected to ECC 4.6C. 
    All the middleware connectivity have been configured and we have a process of creating customers (BP) in CRM which inturn flows to R/3.  We dont create customers in R/3 system.  Now when i make any changes to the customer in R/3 system i dont find a queue getting generated in SMQ1 in R/3 system and also the changes not getting reflected in CRM system.  But any changes made to CRM is flowing to backend R/3 system.
    Settings like groupings, number ranges, PIDE etc are configured.
    Please let me know how to sove this issue.
    Cheers
    Ramesh

    The issue lies in the following customizing in your R/3 system:
    1) Go to tx SM30 in the R/3 system.
    2) Open the view CRMRFCPAR.
    3) For CUSTOMER_MAIN and CUSTOMER_REL objects you need to uncheck the 'Discard' checkbox  Save.
    This will make sure that the delta changes for your Customer Master flow
    to the CRM system.
    Check out these notes as they maybe of assistance
    914437
    504169
    504265

  • Change request released & but not visible

    Hi kaushal & all,
    Customizing change request is released from development system & data file & co-files are not generated which inturn i can't manage to
    see the request in queue.Also log is not visible for the released request.

    Hi,
    Customizing change request is released from development system & data file & co-files are not generated
    For the above reason only two possibilities if STMS configuration is proper.
    - Request is local request
    - No target system is define in released request.
    in your development system run se01 -> in display tab enter request -> press enter.
    double click on request -> select properties tab -> make sure target system indicate your QAS system.
    regards,
    kaushal

  • Pur Grp and product category changes made in R3E not reflecting back to SRM

    Need to investigate why changes made to Purchase Requisitions in SAP R/3 (Purchasing Group & product category) doesn't feed back to SRM.
    Purchasing Group and product category changes made in R3E do not reflect back in SRM.

    Hi Sanjay,
    You should also schedule report BBP_GET_STATUS_2 (updating requirement coverage
    requests) to run in the Enterprise Buyer system, so that information on the status of purchase
    requisitions, purchase orders, and reservations is up-to-date.
    I hope,this helps.
    Regards,Nishant

  • HT1386 devices not updating after sync and changes made in itunes not happening?

    Hi, I think my ITunes is corrupt and may need to be reinstalled? Changes made on the Mac in Itunes to playlist do not sync to either our 5 or 4S. other issues in Itunes I've noticed is that adding songs to playlists only works if I drag them...using the drop-down menu and 'add to' doesn't make the change occur.  Any suggestions?

    How is your iPod configured to sync with your iTunes library?  Automatically or manually?  In other words, what options do you have enabled from under the iPod's Music and Summary tabs?
    Syncing music to iPod or iPhone
    B-rock

  • DNG files exported from LR4 not showing changes made when opened in PSE10?

    I have LR4, and once I make some develop changes I've been exporting the files I want to use as DNG.  I then open them in PSE10 to make final edits.  It's been working fine, actually I had an older version of Adobe Raw in my PSE on my other computer.  So when I opened in PSE it would ask if I wanted to conver to compatible version to edit in camera raw.  I always said no b/c I didn't need to do anymore raw edits.  Now that I have installed PSE on my new computer, it has the new ACR version I guess.  When I open the DNGs to edit now I no longer get this error message, but it's showing my contrast, etc. as a standard raw setting instead of the changes I made in LR.  Some are showing....like vibrance, but "recovery" which I know is "highlights" in LR, and other things are not showing correctly.  I know that the options are different, but I don't want to use the ACR settings that it's using when I open the file, or have to go through them again.  I'm sure there's something I'm missing but can't figure it out.  Thanks for any help!

    I quite simply did not comment on the issue of "it is supposed to be better to keep DNG files as opposed to NEF files now, right?"
    The issue you raised in your original post, and the issue of choosing DNG versus NEF, are completely separate and independent.
    The issue of transferring photos to PSE would cause the exact same problems in your case whether or not you use DNG or NEF.
    On the issue of converting photos from NEF to DNG, there are advantages and disadvantages, some people do and some people don't. If you'd like to know more, I suggest you search this forum, there are plenty of discussions on this topic.

  • Artist name/album name changes made in itunes not showing up on my iphone4S

    I added some songs to my iphone and I changed some of the songs' artist names in itunes. However, the changes that I made in itunes are not showing up on the iphone. Changes to album names are also not showing up. But album art does show up on my iphone. I've tried converting id3 tags and I've tried resetting the phone but nothing has worked. Does anybody know what is wrong and how to fix it?? Thanks.

    Haven't had the problem.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • PDI changes of one developer not visible to another

    Hi,
    If the PDI changes done by a developer from a SDK solution, activated on the tenant, are to be viewed by another PDI developer or Administrator or any other user in C4C for testing purpose,
    is there any setting to be done ?
    If yes, what and how ? Plz guide.
    Thanks, Sachin.

    Hi Vinod,
    looks like my text was not fully understandable. Let me give an e.g. :
    Suppose developer1 adds a dropdown field to search UI and activates the changes.
    developer1 logs into C4C UI and finds the required field in the UI.
    Now developer2 OR admin user logs into C4C UI and checks if the same field is displayed in the UI, but cannot see it on the screen.
    I want the field (dropdown) to be visible to all users of C4C in the C4C UI.
    Now, kindly let me know if any solution on this ?
    Thanks, Sachin.

  • Changes Made in PS5 not Always Recognized in LR3

    I use LR 3.0, PS5 on a Mac Pro 2.66 16GB Ram running OS X10.6.4
    Lately I noticed that when I process an image from LR using Photoshop, sometimes when I close and save and go back to LR, some of the changes I applied to the PSD file are not showing in LR. But if I export the file the changes are there. Or if I open the file again and choose "Edit a copy with LR adjustments" the changes are there and if I save that second copy, the changes show even in LR. It is as if LR fails to update the image preview after I work on the file in PS.
    Please note:
    • I have been editing files from LR to PS for years now. It is anormal part of my worflow and I naver had such problem.
    • This strange beahvior does not happen with every file.
    • My file naming is very consistent and does not include spaces or strange characters. An example of my file names is: "20100723_egg_001.CR2"
    I was able to recreate the problem by doing the following:
    I imported a file from Canon 1Ds MKIII
    - applied basic LR settings
    - open in PS5 from LR (command -E)
    - it opens in a 16bit PSD file in Profoto RGB
    - I applied curves adjustment layer
    - I applied hue/saturation adjustment layer
    - I hit save (command-S) and watched the thumbnail get updated in LR. So far so good.
    - Then I changed the mask in the Hue/Saturation layer to black (to undo the effect)
    - Hit save again. No update happening in LR.
    - Created a new layer and painted a blue line across.
    - Hit save again. No update happening in LR.
    - Close the file in PS.
    - Thumbnail in LR is stuck to the look in the first save I did.
    BUT
    - If I open the file from LR to PS5 again, the changes and layers are all there.
    OR
    - If I export the file, it exports correctly with the latest updates and changes I did in PS5.
    Does anybody know what might be going wrong?
    Thank you,
    Francesco Tonelli

    FYI I did clear the cache and did not solve the problem.
    The ACR cache, which you can clear from the preferences in Lightroom is not the same cache that Dorin is talking about. He is talking about the previews that are stored in a filefolder right along your catalog file. If you delete that, Lightroom will be forced to rebuild previews for all your images.
    However, I noticed that you were using psd. There have been some reports of strange behavior in LR 3 with psd files. I would try setting the preference in Lightroom for external edit in photoshop to tiff (the default now). This gives you better compatibility anyway.

  • Time changes made in iPhoto not showing in Photos

         I've scanned a lot of physical family photos from when I was a child into iPhoto and changed the dates so they show in iPhoto on the correct day. So Xmas day 2000 showed up on 25 December 2000 as you would expect.
    Since importing into the new Photos App these correct dates haven't copied. Instead showing the date they where scanned.
    Is their a way to fix this or do I need to manually find all these pictures and manually adjust each one to the correct time?

    Haven't had the problem.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • Changes made through SE43N not reflecting in the SAP easy access

    Hi All,
    I have done changes through T code SE43N in area menu FIGL. But I am not able to see the T Codes in the SAP easy access. Can anyone help on this issue?
    Kind Regards,
    Yogesh

    Hi,
    SAP standard menu is S000 area. By modifying FIGL area you don't update S000.
    Regards,
    Eli

  • Changes made in Console not appearing on portal until restart.

    When I make any change using the Console, such as changing the title of a channel, that change does not appear on the Portal unless I restart it. Does anyone have any advice?
    The following errors occur:
    In iwtPll logs:
    8/14/02 12:36:15 PM EDT: Thread[Thread-171,5,main]
    Cannot get service handler for synchronize :
    java.lang.ClassNotFoundException: Service class not found:synchronize
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.lang.ClassNotFoundException.<init>(ClassNotFoundException.java:69)
    at com.iplanet.portalserver.naming.WebtopNaming.getServiceClass(WebtopNaming.java:126)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.getServiceHandler(Compiled Code)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(Compiled Code)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Code)
    at javax.servlet.http.HttpServlet.service(Compiled Code)
    at javax.servlet.http.HttpServlet.service(Compiled Code)
    at com.netscape.server.http.servlet.NSServletRunner.Service(Compiled Code)
    in iwtProfile log
    8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
    setAttrPrivValues.walkTree
    com.iplanet.portalserver.profile.service.ProfileServiceException: 321^Supp
    lyQuickplace-title-at
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileServiceException.<init>(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.walkTree(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.setAttrPrivValues(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.setProfile(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.processProfileRequest(Compiled Code)
    at com.iplanet.portalserver.profile.service.SyncService.processRequest(Compiled Code)
    at com.iplanet.portalserver.profile.service.SyncService.process(Compiled Code)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(Compiled Code)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Code)
    at javax.servlet.http.HttpServlet.service(Compiled Code)
    at javax.servlet.http.HttpServlet.service(Compiled Code)
    at com.netscape.server.http.servlet.NSServletRunner.Service(Compil
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileServiceException.<init>(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.walkTree(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.setAttrPrivValues(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.setProfile(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.processProfileRequest(Compiled Code)
    at com.iplanet.portalserver.profile.service.SyncService.processRequest(Compiled Code)
    at com.iplanet.portalserver.profile.service.SyncService.process(Compiled Code)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(Compiled Code)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Code)
    at javax.servlet.http.HttpServlet.service(Compiled Code)
    at javax.servlet.http.HttpServlet.service(Compiled Code)
    at com.netscape.server.http.servlet.NSServletRunner.Service(Compiled Code)
    8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
    ProfileResponse: exception key:321
    8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
    ProfileResponse: exception string:SupplyQuickplace-title-at
    8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
    ProfileRequest.GetProfile:In atts 1
    8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
    ProfileRequest.GetProfile:In privs 0

    The exceptions indicate that there is profile service errors which could have happend when it was trying to fetch those attributes.
    What version of portal are you using ?, are you running a multi server instance ?, if so there is a possibility that the profile cache could be out of sync between the two instances. Generally making profile changes would necessitate the need to logout and log back and only when you change ldap auth information or property file changes you would need to make server restarts ..

  • Changes made in iWeb not reflected online

    Hello,
    I succesfully rehosted my website after mobile me closed and decided to make some changes whilst I was doing so.
    With the site live again I noticed an incorrect link.  I have fixed it in iWeb and tried to publish the site again.  iWeb tells me the publish was complete but the link is still incorrect online (despite being good in iWeb)
    Any ideas?
    Cheers

    The first thing to try is emptying the browser cache or put a ? at the end of the URL to force the browser to load the new version from the server and not from the cache.

  • Changes made in Itunes not in Music Library

    Hi: I have spent countless hours fixing track names, adding artwork and all the other fun stuff. None of these changes are reflected in the music library and I can't figure out how to fix that situation. I've scrolled through the forum and can't finad an answer that works. If anyone knows how to do this, I would certainly appreciate the help. Thanks.

    I am not 100% sure, but that kinda sounds like a Vista permissions problem that other folks have posted.
    Use these directions to take FULL control over your top-level music folder, and all subfolders.
    Vista permissions are funny, sometimes read/write is not enough. You need FULL control and ownership.
    How to Take Ownership and Grant Permissions in Windows Vista

Maybe you are looking for